Simultaneous separation of 17 inorganic and organic arsenic compounds in marine biota by means of high-performance liquid chromatography/inductively coupled plasma mass spectrometry

A method using high-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICP-MS) has been developed to determine inorganic arsenic (arsenite, arsenate) along with organic arsenic compounds (monomethylarsonic acid, dimethylarsinic acid, arsenobetaine, arsenocholine, trimethylarsine oxide, tetramethylarsonium ion and several arsenosugars) in fish, mussel, oyster and marine algae samples. The species were extracted by means of a methanol/water mixture and a dispersion unit in 2 min, with extraction efficiencies ranging from 83 to 107% in the different organisms. Up to 17 different species were determined within 15 min on an anion-exchange column, using a nitric acid gradient and an ion-pairing reagent. As all species are shown in one chromatogram, a clear overview of arsenic distribution patterns in different marine organisms is given. Arsenobetaine is the major compound in marine animals whereas arsenosugars and arsenate are dominant in marine algae. The method was validated with CRM DORM-2 (dogfish muscle). Concentrations were within the certified limits and low detection limits of 8 ng g(-1) (arsenite) to 50 ng g(-1) (arsenate) were obtained.     

Arsenic speciation in marine biological materials by LC-UV-HG-ICP/OES

Arsenic compounds have been extracted with methanol/water (1:1) from three Certified Reference Materials (CRMs): CRM 278 (mussel tissue), CRM 422 (cod muscle) and DORM-1 (dogfish muscle). The extracts obtained were analyzed by an LC-UV-HG-ICP/OES coupled system, which permits the one-line determination of arsenocholine, arsenobetaine, dimethylarsinate, monomethylarsonate, As(III) and AS(V) at concentration in the range of gl^–1. The main species found in all CRMs extracts was arsenobetaine (97.3% of total As in CRM 422, 89.5% of total As in DORM-1 and 22.2% of total As in CRM 278).     

Gas chromatography--inductively coupled plasma--time-of-flight mass spectrometry for the speciation analysis of organolead compounds in environmental water samples

The application of inductively coupled plasma--time-of-flight mass spectrometry for the speciation analysis of organolead compounds in environmental waters is described. Construction of the transfer line was achieved by means of a relatively simple and rapid coupling procedure. Derivatization of the ionic lead species was achieved by in-situ propylation with sodium tetrapropylborate; simultaneous extraction of the derivatized compounds in hexane was followed by separation and detection by capillary gas chromatography hyphenated to inductively coupled plasma-time-of-flight mass spectrometry. Detection limits for the different organolead species ranged from 10 to 15 fg (as Pb), corresponding to procedural detection limits between 50 and 75 ng L(-1), on the basis of a 50 mL snow sample, extraction with 200 microL hexane, and subsequent injection of 1 microL of the organic extract on to the column. The accuracy of the system was confirmed by additional analysis of the water samples by capillary gas chromatography coupled with microwave-induced plasma-atomic-emission spectrometry and the analysis of a standard reference material CRM 605 (road dust) with a certified content of trimethyllead.     

Determination of arsenic in seafood by focused microwave digestion and hydride generation-atomic fluorescence detection

A new method was developed for total arsenic determination in seafood products such as oysters, mussels, tuna fish, and algae. Matrix decomposition and oxidation to arsenate of all the arsenic compounds in the product were completed in 25 min by using a 3-step program of focused microwaves (40-120 W) with nitric and sulfuric acids. Quantitation was performed by hydride generation-atomic fluorescence detection (HG-AFS). Results of method optimization are presented and discussed. A detection limit <125 microg/kg arsenic was obtained; the quantitation limit was close to 400 microg/kg, with repeatability and reproducibility <5% relative standard deviation. Validation was performed by analyzing 4Reference Materials (arsenic concentration expressed as mg/kg): The National Institute of Standards and Technology SRM 1566a Oyster tissue (14.0 +/- 1.2); the Bureau Community of Reference (now Standard Measurements & Testing Program) CRM 278 Mussel tissue (5.9 +/- 0.2) and CRM 627 Tuna fish (4.8 +/- 0.3); and the International Atomic Energy Agency RM 140 Fucus sample (44.3 +/- 2.1).     

Simultaneous determination of trimethyl-and triethyllead in urban dust by species-specific isotope dilution/gas chromatography-inductively coupled plasma mass spectrometry

Both (206)Pb-labeled trimethyllead (TML) and triethyllead (TEL) were synthesized from (206)Pb-enriched metallic Pb certified reference material (NIST SRM 983) and iodomethane or iodoethane through a one-process reaction in a closed system using centrifuge tubes, respectively. Organolead compounds in an urban dust reference material (BCR CRM 605) were extracted with an acetic acid/methanol (1:1) solution, which was mechanically shaken for 24 h. After adjusting the pH of the extracted solution to pH 5, the extracted organolead compounds were derivatized by tetrabutylammonium tetrabutylborate (TATB) and measured with GC-ICPMS. The analytical results of TML and TEL for BCR CRM 605 were 8.22 +/- 0.04 microg kg(-1) (mean +/- standard deviation, n = 3) and 1.12 +/- 0.06 microg kg(-1), respectively. The analytical results of TML agreed well with the certified value (7.9 +/- 1.2 microg kg(-1)).     

Determination of tributyltin oxide in coastal marine sediments and mussels by electrothermal atomic absorption spectrometry

We have devised a new method for bis(tributyltin)oxide (TBTO) determination in marine sediments and mussels. This technique involves an n-hexane/methylene chloride mixture extraction and extract purification with a sodium hydroxide wash in order to eliminate interfering compounds. TBTO is then extracted again by nitric acid and converted into an inorganic tin species; the analysis has been effected using Zeeman graphite furnace-atomic absorption spectrophotometry. The method detection limit for the matrices examined is 0.004 μg TBTO g^?1 (wet weight) and is sufficient for the analysis in real samples. The percentage recovery of TBTO from sediments and mussels samples is higher than 85% and 95% respectively. This method has been applied to TBTO level determination in sediments and mussels (Mytilus galloprovincialis) sampled in the harbour area in Taranto, where mussel culture activities are much developed; the TBTO levels obtained in sediments and mussels were in the range 15-47 ng g^?1 (wet weight) and 11-30 ng g^?1 (wet weight) respectively. Such values are comparable with those found in other harbour areas in the Mediterranean Sea.     

Sequential photocatalyst-assisted digestion and vapor generation device coupled with anion exchange chromatography and inductively coupled plasma mass spectrometry for speciation analysis of selenium species in biological samples

We have developed an on-line sequential photocatalyst-assisted digestion and vaporization device (SPADVD), which operates through the nano-TiO₂-catalyzed photo-oxidation and reduction of selenium (Se) species, for coupling between anion exchange chromatography (LC) and inductively coupled plasma mass spectrometry (ICP-MS) systems to provide a simple and sensitive hyphenated method for the speciation analysis of Se species without the need for conventional chemical digestion and vaporization techniques. Because our proposed on-line SPADVD allows both organic and inorganic Se species in the column effluent to be converted on-line into volatile Se products, which are then measured directly through ICP-MS, the complexity of the procedure and the probability of contamination arising from the use of additional chemicals are both low. Under the optimized conditions for SPADVD – using 1 g of nano-TiO₂ per liter, at pH 3, and illuminating for 80 s – we found that Se(IV), Se(VI), and selenomethionine (SeMet) were all converted quantitatively into volatile Se products. In addition, because the digestion and vaporization efficiencies of all the tested selenicals were improved when using our proposed on-line LC/SPADVD/ICP-MS system, the detection limits for Se(IV), Se(VI), and SeMet were all in the nanogram-per-liter range (based on 3σ). A series of validation experiments – analysis of neat and spiked extracted samples – indicated that our proposed methods could be applied satisfactorily to the speciation analysis of organic and inorganic Se species in the extracts of Se-enriched supplements.     

Automated system for on-line determination of dimethylarsinic and inorganic arsenic by hydride generation–atomic fluorescence spectrometry

A multisyringe flow-injection approach has been coupled to hydride generation-atomic fluorescence spectrometry (HG-AFS) with UV photo-oxidation for dimethylarsinic (DMA), inorganic As and total As determination, depending on the pre-treatment given to the sample (extraction or digestion). The implementation of a UV lamp allows on-line photo-oxidation of DMA and the following arsenic detection, whereas a bypass leads the flow directly to the HG-AFS system, performing inorganic arsenic determination. DMA concentration is calculated by the difference of total inorganic arsenic and measurement of the photo-oxidation step. The detection limits for DMA and inorganic arsenic were 0.09 and 0.47 μg L(-1), respectively. The repeatability values accomplished were of 2.4 and 1.8%, whereas the injection frequencies were 24 and 28 injections per hour for DMA and inorganic arsenic, respectively. This method was validated by means of a solid reference material BCR-627 (muscle of tuna) with good agreement with the certified values. Satisfactory results for DMA and inorganic arsenic determination were obtained in several water matrices. The proposed method offers several advantages, such as increasing the sampling frequency, low detection limits and decreasing reagents and sample consumption, which leads to lower waste generation.     

Element fingerprinting of marine organisms by dynamic reaction cell inductively coupled plasma mass spectrometry

A method for the determination of sixteen elements (Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Se, Sn, V, Zn) in seafood by dynamic reaction cell inductively coupled plasma mass spectrometry (ICP–DRC–MS) is presented. A preliminary study of polyatomic interferences was carried out in relation to the chemical composition of marine organisms belonging to different taxa. Acid effects and other matrix effects in marine organisms submitted to closed-vessel microwave digestion were investigated as well. Ammonia was the reactive gas used in the DRC to remove polyatomic ions interfering with ²⁷Al, ⁵²Cr, ⁵⁶Fe and ⁵¹V. Optimal conditions for the simultaneous determination of analytes were identified in order to develop a fast multielement method. A suite of real samples (mussels and various fish species) were used during method development along with three certified reference materials: BCR CRM 278R (mussel tissue), BCR CRM 422 (cod muscle) and DORM-2 (dogfish muscle). The proposed analytical approach can be used in conjunction with suitable chemometric procedures to address quality and safety issues in aquaculture and fisheries. As an example, a case study is described in which mussels from three farming sites in the Venice Lagoon were distinguished by multivariate analysis of element fingerprints.      

Roxarsone and transformation products in chicken manure: determination by capillary electrophoresis-inductively coupled plasma-mass spectrometry

The determination of the animal feed additive roxarsone (3-nitro-4-hydroxyphenylarsonic acid) and six of its possible transformation products (arsenite, arsenate, monomethylarsonate, dimethylarsinate, 3-amino-4-hydroxyphenylarsonic acid, and 4-hydroxyphenylarsonic acid) in chicken manure was investigated using capillary electrophoresis-inductively coupled plasma-mass spectrometry (CE-ICP-MS). Initial method development was conducted using ultraviolet (UV) detection for ruggedness and time efficiency. Separation of these seven arsenic species was effected using a 20 mM phosphate buffer at pH 5.7. The CE-ICP-MS limits of detection in terms of As for each of the species was in the low microg.L(-1) range, corresponding to absolute detection limits in the range 20-70 fg As (based on a 23 nL injection). Overall, the method developed in this study provides high selectivity and low limits of detection (1-3 microg.L(-1) or low-ppb, based on As), uses small sample volume (low nL), and produces minimal wastes.     

Arsenic speciation in water and biota samples at trace levels by ion chromatography inductively coupled plasma-mass spectrometry

A sensitive, reliable, simple and rapid analytical method was developed for the determination of arsenite [As(III)], arsenate [As(V)] and arsenobetaine (AsB) species using ion chromatography combined with inductively coupled plasma-mass spectrometry (IC-ICP-MS). Inorganic and organic arsenic species were separated with an anion exchange column (Dionex AS9) and a 50 mM sodium bicarbonate mobile phase (pH 10) at a flow rate of 1.0 mL min^?1. %RSD values were found to be lower than 5.1% for all arsenic species. The limits of detection (LOD) obtained for As(III), As(V) and AsB were 16.5 ng L^?1, 14.1 ng L^?1 and 6.2 ng L^?1, respectively. The developed analytical method was tested using AsB certified reference material (NMIJ CRM 7901-a), and spring water certified reference material (UME CRM 1201) for accuracy check. This method was applied for the quantitative determination of arsenic species in different water samples and chicken samples as a solid matrix.     

Comparison of microconcentric and membrane-desolvation sample introduction systems for determination of low rare earth element concentrations in surface and subsurface waters using sector field inductively coupled plasma mass spectrometry

Analytical performances of a microconcentric nebulizer (MCN) and a membrane-desolvation sample introduction system (Aridus) were compared for determination of low concentrations of rare earth elements (REEs) in surface and subsurface waters using a double focusing sector field inductively coupled plasma mass spectrometer. Conventional figures of merit were employed, such as sensitivities, limits of detection (LOD), REE–O⁺ formation, matrix induced interferences, long term signal variations, and recovery from spiked sea water samples and a pristine water CRM.     

Silicon speciation by gas chromatography coupled to mass spectrometry in gasolines

A method for the speciation of silicon compounds in petroleum products was developed using gas chromatography coupled to mass spectrometry (GC-MS). Prior to analysis, several precautions about storage and conservation were applied for all samples. In spiked gasoline samples, limits of detection between 24 and 69 μg kg(-1) for cyclic siloxanes (D(4)-D(6)) and between 1 and 7 μg kg(-1) for other species were obtained. In this study, cyclic siloxanes (D(n)) and one ethoxysilane were quantified for the first time in petroleum products by a specific method based on response factor calculation to an internal standard. This method was applied to four samples of naphthas and gasolines obtained from a steam cracking process. Cyclic siloxanes were predominant in four investigated samples with concentrations ranging between 101 and 2204 μg kg(-1). Cyclic siloxane content decreased with an increase in their degree of polymerization. During a steam cracking process, silicon concentrations determined by GC-MS SIM (single ion monitoring) significantly increase. This trend was confirmed by ICP-OES (inductively coupled plasma optical emission spectroscopy) measurements but a difference on the total silicon content was observed, certainly highlighting the presence of unknown silicon species. GC-MS SIM method gives access to the chemical nature of the silicon species, which is crucial for the understanding of hydrotreatment catalyst poisoning in the oil and gas industry.     

加速溶剂萃取-在线凝胶渗透色谱-气相色谱-质谱联用法快速测定蔬菜和水果中多农药残留

建立了加速溶剂萃取-在线凝胶渗透色谱-气相色谱-质谱联用(GPC-GC-MS)快速测定蔬菜、水果中代表性农药残留的检测方法。样品经二氯甲烷-丙酮(1:1, v/v)加速溶剂提取,活性炭柱-氨基柱串联净化,氮吹至干,残留物用环己烷-丙酮(7:3, v/v)溶解后经GPC-GC-MS系统以选择离子监测(SIM)模式测定。结果表明,22种农药在各自的线性范围内线性关系良好(相关系数不低于0.9981),检出限(以信噪比(S/N)为3计算)为0.3～1.8 μg/kg,定量限（S/N=10）为1~6 μg/kg。在2种基质(大白菜、苹果)中3个添加水平下的回收率为70.5%～107.5%,相对标准偏差为2.1%～8.7%。该方法提取效率高,定性定量准确、灵敏,可实现对蔬菜、水果中多农药残留的快速检测。     

Urinary selenium speciation by high-performance liquid chromatography-inductively coupled plasma mass spectrometry: advantages of detection with a double-focusing mass analyser with a hydride generation interface

A detailed comparison of the performance of inductively coupled plasma mass spectrometry (ICP-MS), with quadrupole and double-focusing instruments for the speciation of selenium in urine has been carried out. Selenium sensitivity about 23-59 times higher with double-focusing ICP-MS detection was observed, but limits of detection were only 1-8.7 times better because of background noise. Selenium species separation has been carried out by both reversed-phase and vesicle-mediated high-performance liquid chromatography (HPLC), coupled on-line with the detector via conventional nebulization and via on-line focused microwave digestion-hydride generation. A remarkable improvement in sensitivity (28-110 times better for (77)Se depending on the chromatographic system) and elimination of interference problems from the urinary matrix or the components of the mobile phases were achieved when an on-line microwave digestion-hydride generation interface was used, but the background noise was much higher than with conventional nebulization. Therefore, the limits of detection were not as low as expected from such improvement in the sensitivity. More selenocompounds can be separated, and a slight improvement in the sensitivity and limits of detection was obtained when the vesicle-mediated HPLC system was used as compared with reverse-phase chromatography. However, the use of several complementary chromatographic systems, such as reverse-phase HPLC, is recommended to bring some light on the selenocompounds present in basal human urine. Comparative data of rat urine speciation are also given.     

HPLC-HG-ICP-MS: a sensitive and selective method for inorganic arsenic in seafood

The addition of an online post-column hydride generation (HG) step to the commonly used high-performance liquid chromatography inductively coupled plasma-mass spectrometry (HPLC-ICP-MS) setup for arsenic speciation proved to significantly improve the detection limits for the determination of inorganic arsenic (iAs) as arsenate in seafood samples, where the limit of detection and limit of quantification were found to be 0.0004 and 0.0014?mg?kg(-1), respectively with HG. HG as an additional step further added to the selectivity of the determination of the iAs species and increased the detection and quantification of low levels of iAs (<0.002?mg?kg(-1)) in samples with complicated matrices.     

Advantages of hydride generation interface for selenium speciation in waters by high performance liquid chromatography-inductively coupled plasma mass spectrometry coupling

This paper focuses on the analytical performance improvement of the coupled technique HPLC-ICPMS using on-line collision/reaction cell technology for selenium elemental and speciation analyses at the ng (Se) l(-1) level in aquatic environment. Collision/reaction cell operating parameters were optimised, resulting in selected conditions of 5.5 ml min(-1) H(2) and 0.5 ml min(-1) He mixture. The detection limits obtained were around 5 ng (Se) l(-1) for total analysis, and between 7 and 15 ng (Se) l(-1) depending on the species for speciation analysis. The capability of UV irradiation-hydride generation interfacing to increase detector sensitivity was also evaluated for speciation analysis. The detection limits obtained were in the range 2-8 ng (Se) l(-1) depending on the species. Moreover, such interface allowed to prevent bromine introduction to the ICPMS which is particularly convenient for selenium trace analysis in natural waters as (80)Se is preserved free from BrH interferences. The developed method was validated using certified water with low selenium content (TM Rain 95, NWRI, Canada) and applied to the analysis of different waters.     

Quantification of fenitrothion and its main metabolites in poplar leaves by isotope dilution gas chromatography-mass spectrometry coupled with solid-phase microextraction

A sensitive and specific method for determining fenitrothion and its main metabolites, 3-methyl-4-nitrophenol and fenitrooxon, in poplar leaves using deuterated isotopes as the internal standard is described. The analytes and the labeled isotopes were extracted from leaves by solid-phase microextraction and subsequently analysed by gas chromatography coupled with mass spectrometry. The method had a chromatographic run time of 17.0 min and good linearity over the range 0.01-10 mg kg(-1). The detection limits ranged between 2.5 and 0.6 microg kg(-1). The isotopic dilution technique allowed improving significantly the repetitivity even using different fibers with the same coating (RSD<5.1%). The method was applied successfully to study the persistence of fenitrothion in forestal matrices in a poplar forest after cannon spray application of the insecticide.     

Analysis of lead in tooth enamel by laser ablation-inductively coupled plasma-mass spectrometry.

Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) was used to determine the Pb/Ca ratios in the enamel of deciduous incisors, a biomarker of in utero Pb exposure, using pelletized bone certified reference materials (CRMs) as calibrants. The detection limit for Pb by LA-ICP-MS was 11 microg kg(-1) demonstrating an adequate sensitivity for Pb in the teeth of unexposed individuals (0.1-10 mg kg(-1)). The precision for the Pb/Ca ratios in NIST SRM 1486 Bone Meal was 3.4%. The correlation between Pb/Ca ratios obtained by LA-ICP-MS and those obtained by a digestion method was highly significant. We found one point calibration by a CRM was applicable for the quantification of Pb in tooth enamel. This method will be valuable for the assessment of in utero Pb exposure levels.     

Multi-mycotoxin analysis in eggs using a QuEChERS-based extraction procedure and ultra-high-pressure liquid chromatography coupled to triple quadrupole mass spectrometry

A reliable and rapid method has been developed for the determination of 10 mycotoxins (beauvericin, enniatin A, A1, B1, citrinin, aflatoxin B1, B2, G1, G2 and ochratoxin A) in eggs at trace levels. Ultra-high-pressure liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS) has been used for the analysis of these compounds in less than 7 min. Mycotoxins have been extracted from egg samples using a QuEChERS-based extraction procedure (Quick, Easy, Cheap, Effective, Rugged and Safe) without applying any further clean-up step. Extraction, chromatographic and detection conditions were optimised in order to increase sample throughput and sensitivity. Matrix-matched calibration was used for quantification. Blank samples were fortified at 10, 25, 50 and 100 μg kg(-1), and recoveries ranged from 70% to 110%, except for ochratoxin A and aflatoxin G1 at 10 μg kg(-1), and aflatoxin G2 at 50 μg kg(-1). Relative standard deviations were lower than 25% in all the cases. Limits of detection ranged from 0.5 μg kg(-1) (for aflatoxins B1, B2 and G1) to 5 μg kg(-1) (for enniatin A, citrinin and ochratoxin A) and limits of quantification ranged from 1 μg kg(-1) (for aflatoxins B1, B2 and G1) to 10 μg kg(-1) (for enniatin A, citrinin and ochratoxin A). Seven samples were analyzed and aflatoxins B1, B2, G1, G2, and beauvericin were detected at trace levels.