Spectrophotometric determination of the stability constant of the Eu(III)-murexide complex

The values of the stability constants of the Ca(II) and lanthanide(III) complexes of murexide reported in the literature were determined without proper correction for binding of buffer ions to the metal ion. The constants are best determined without a buffer present. Accurate values of conditional stability constants for the Eu(III)—murexide complex (relative standard deviation better than 3%), of the differential molar absorptivity of the Eu(III)—murexide complex with respect to murexide at 480 nm (relative standard deviation better than 0.5%) and of the molar absorptivity of murexide at 520 and at 506 nm (precision better than 0.4%) at pH 5.0 and 6.5 at 15, 25 and 35° are reported. The accuracy and precision of the concentration of metal ion solution determined by using these conditional stability constants are discussed.     

Dynamics and heterogeneity of Pb(II) binding by SiO2 nanoparticles in an aqueous dispersion

Pb(II) binding by SiO(2) nanoparticles in an aqueous dispersion was investigated under conditions where the concentrations of Pb(2+) ions and nanoparticles are of similar magnitude. Conditional stability constants (log K) obtained at different values of pH and ionic strength varied from 4.4 at pH 5.5 and I = 0.1 M to 6.4 at pH 6.5 and I = 0.0015 M. In the range of metal to nanoparticle ratios from 1.6 to 0.3, log K strongly increases, which is shown to be due to heterogeneity in Pb(II) binding. For an ionic strength of 0.1 M the Pb(2+)/SiO(2) nanoparticle system is labile, whereas for lower ionic strengths there is loss of lability with increasing pH and decreasing ionic strength. Theoretical calculations on the basis of Eigen-type complex formation kinetics seem to support the loss of lability. This is related to the nanoparticulate nature of the system, where complexation rate constants become increasingly diffusion controlled. The ion binding heterogeneity and chemodynamics of oxidic nanoparticles clearly need further detailed research.     

Sequential extraction and determination of copper and nickel with 2,4-dihydroxyacetophenone thiosemicarbazone

2,4-Dihydroxyacetophenone thiosemicarbazone (DAPT) forms a 1:1 complex with copper(II) which can be extracted into n-butanol or ethyl acetate from acetic acid-sodium acetate (pH 5.0) buffer, and a 1:1 nickel(II) complex which can be extracted into n-butanol from ammonium chloride-ammonia (pH 7.5) buffer. The difference between the pH(1 2 ) values for extraction of the two complexes is 3.4 and this has been exploited for their sequential extraction and determination. The molar absorptivities for the copper and nickel complexes are 1.5 x 10(4)l.mole(-1).cm(-1) at 390 nm and 8.2 x 10(3)l.mole(-1).cm(-1) at 385 nm respectively. The procedure has been applied to the analysis of cupronickel.     

Electrodeposition of a cobalt-molybdenum alloy from an ammonia-citrate electrolyte

Kinetics of processes of electrochemical production of a cobalt-molybdenum alloy out of an ammonia-citrate electrolyte is studied. The electrolyte’s composition is similar to that used for depositing a nickel-molybdenum alloy. It is established that the cobalt-molybdenum alloy undergoes deposition at smaller values of pH (5.0–6.0) than the nickel-molybdenum alloy (7.0–9.0). The current efficiency for the cobalt-molybdenum alloy is substantially dependent on the electrolyte pH, whereas the chemical composition of the obtained deposits is practically independent of the electrolyte pH in the pH interval 5.0–8.0 at current densities of 0.025 to 0.100 A cm^?2. On the other hand, a change in the electrolyte pH produces a considerable effect on the morphology of the obtained deposits. At large values of pH (pH 8.0), one can obtain a powder-like deposit of the cobalt-molybdenum alloy with a small value of the current efficiency. The deposits that are obtained in the pH region 5.0–6.0 have some cracks, with the number of cracks increasing with the electrolyte pH.     

Stability constants and molar absorptivities for complexes of chromium(III) and cobalt(II) with 2-pyridylmethanamine

The stability constants and molar absorptivities of complexes of Cr(3+) and Co(2+) with 2-pyridinemethanamine have been determined from spectrophotometric data of very dilute aqueous solutions.     

Spectroscopic study of chloranil charge-transfer complexes of amino acids and related compounds

The absorption maxima, molar absorptivities, infrared spectra, compositions, formation constants, and pH dependence of amino acid—chloranil complexes have been determined with purified chloranil The n-π charge-transfer interaction depends on the presence of an unprotonated amino group; pH 9 is optimal for complex formation, but once formed, the complex is stable in a highly acidic medium and may be quantitatively extracted by hexanol. The molar absorptivities of the chloranil complexes of glycine, iminodiacetic acid, NTA, EDTA, DTPA and TTHA were measured. There is a linear relationship between the logarithm of the molar absorptivities of their chloranil complexes and the number of carboxylic groups in the molecule. There is an inverse linear relationship between the molar absorptivities of chloranil—metal—EDTA complexes and the logarithm of the stability constants of the EDTA chelates. This leads to a new method of determining the stability constants of complexes involving a nitrogen-donating group.     

Direct excitation luminescence spectroscopy of Eu(III) complexes of 1,4,7-tris(carbamoylmethyl)-1,4,7,10- tetraazacyclododecane derivatives and kinetic studies of their catalytic cleavage of an RNA analog

The macrocycles 1,4,7-tris(carbamoylmethyl)-1,4,7,10-tetrazacyclododecane (1), 1,4,7-tris[(N-ethyl)carbamoylmethyl]-1,4,7,10-tetraazacyclododecane (2), 1,4,7-tris[(N,N-diethyl)carbamoylmethyl]-1,4,7,10-tetraazacyclododecane (3) and their Eu(III) complexes are prepared. Studies using direct Eu(III) excitation luminescence spectroscopy show that all three Eu(III) complexes exhibit only one predominant isomer with two bound waters under neutral to mildly basic conditions (Eu(X)(H(2)O)(2) for X = 1-3). There are no detectable ligand ionizations over the pH range 5.0-8.0 for Eu(3), 5.0-8.5 for Eu(2) or 5.0-9.5 for Eu(1). The three Eu(III) complexes show a linear dependence of second-order rate constants for the cleavage of 4-nitrophenyl-2-hydroxyethylphosphate (HpPNP) on pH in the range 6.5-8.0 for Eu(3), 7.0-8.5 for Eu(2) and 7.0-9.0 for Eu(1). This pH-rate profile is consistent with the Eu(III) complex-substrate complex being converted to the active form by loss of a proton and with Eu(III) water pK(a) values that are higher than 8.0 for Eu(3), 8.5 for Eu(2) and 9.0 for Eu(1). Inhibition studies show that Eu() binds strongly to the dianionic ligand methylphosphate (K(d) = 0.28 mM), and more weakly to diethylphosphate (K(d) = 7.5 mM), consistent with a catalytic role of the Eu(III) complexes in stabilizing the developing negative charge on the phosphorane transition state.     

Interaction of serum albumin with vinyl sulfonate azo dye

The interaction between bovine serum albumin and the mono azo reactive dye Orange ZT has been investigated using absorption difference spectroscopy. The influence of pH and ionic strength of the solution on the stability of the dye-protein complex has been determined. At 25°C, the complex dissociation constants were equal to 24.0, 28.0, 7.0, 11.0, 17.6 and 46.0 μM at pH 7.0, 6.5, 6.0, 5.5, 5.0 and 4.3, respectively. In the presence of 0.1, 0.2, 0.3 M KCl, at pH 6.0 and 25°C, the complex dissociation constants were 8.8, 20.0, 18.0 μM, respectively. The protein-dye complex dissociation constants show that Orange ZT could be used as an affinity ligand for protein purification.      

Competitive adsorption of Ca2+ and Zn(II) ions at monodispersed SiO2/electrolyte solution interface

A study of competitive adsorption of Ca(2+) and Zn(II) ions at the monodispersed SiO(2)/electrolyte solution interface is presented. Influence of ionic strength, pH, and presence of other ions on adsorption of Ca(2+) and Zn(II) in the mentioned system are investigated. zeta potential, surface charge density, adsorption density, pH(50%), and DeltapH(10-90%) parameters for different concentrations of carrying electrolyte and adsorbed ions are also presented. A high concentration of zinc ions shifts the adsorption edge of Ca(2+) ions adsorbed from solutions with a low initial concentration at the SiO(2)/NaClO(4) solution interface to the higher pH values. This effect disappears with a concentration increase of calcium ions. The presence of Ca(2+) ions in the system slightly affects the adsorption of zinc ions on SiO(2), shifting the adsorption edge toward lower pH values and thereby increasing the adsorption slope.     

Stability constants and molar absorptivities for complexes of copper(II) with N-methyldiethanolamine, 1,4-bis(2-hydroxypropyl)-2-methylpiperazine, and 2-amino-2-methyl-1-propanol

The stability constants and molar absorptivities of complexes of Cu(2+) with N-methyldiethanolamine, 1,4-bis(2-hydroxypropyl)-2-methylpiperazine, and 2-amino-2-methyl-1-propanol have been determined from spectrophotometric data for very dilute aqueous solutions.     

The impact of ionic strength and background electrolyte on pH measurements in metal ion adsorption experiments

Our understanding of metal ion adsorption to clay minerals has progressed significantly over the past several decades, and theories have been promulgated to describe and predict the impacts of pH, ionic strength, and background solution composition on the extent of adsorption. Studies evaluating the effects of ionic strength on adsorption typically employ a broad range of background electrolyte concentrations. Measurement of pH in these systems can be inaccurate when pH values are measured with liquid junction pH probes calibrated with standard buffers due to changes in the liquid junction potential between standard, low ionic strength (0.05 M) buffers and high ionic strength solutions (>0.1 M). The objective of this research is to determine the extent of the error in pH values measured at high ionic strength, and to develop an approach for accurately measuring pH over a range of ionic strengths using a combined pH electrode. To achieve this objective, the adsorption of cobalt (10(-5) M) onto gibbsite (10 g/L) from various electrolyte solutions (0.01-1 M) was studied. The pH measurements were determined from calibrations with standard buffers and ionic strength corrected buffer calibrations. The results show a significant effect of the aqueous solution background electrolyte anion and ionic strength on pH measurement. The 0.5 and 1 M ionic strength metal ion adsorption edges shifted to lower pH with increasing ionic strength when pH was calibrated with standard buffers whereas no shift in the adsorption edges was observed when calibrated with ionic strength corrected buffers. Therefore, to obtain an accurate pH measurement, pH calibration should contain the same electrolyte and ionic strength as the samples.     

Thermal stability of recombinant green fluorescent protein (GFPuv) at various pH values

The thermal stability of the recombinant green fluorescent protein (GFPuv) expressed by Escherichia coli cells and isolated by three-phase partitioning extraction with hydrophobic interaction chromatography was studied. The GFPuv (3.5–9.0 μg of GFPuv/mL) was exposed to various pH conditions (4.91–9.03) and temperatures (75–95°C) in the 10 mM buffers: acetate (pH 5.0–7.0), phosphate (pH 5.5–8.0), and Tris-HCl (pH 7.0–9.0). The extent of protein denaturation (loss of fluorescence intensity) was expressed in decimal reduction time (D-value), the time exposure required to reduce 90% of the initial fluorescence intensity of GFPuv. For pH 7.0 to 8.0, the thermostability of GFPuv was slightly greater in phosphate buffer than in Tris-HCl. At 85°C, the D-values (pH 7.1–7.5) ranged from 7.24 (Tris-HCl) to 13.88 min (phosphate) The stability of GFPuv in Tris-HCl (pH>8.0) was constant at 90 and 95°C, and the D-values were 7.93 (pH 8.38–8.92) and 6.0 min (pH 8.05–8.97), respectively. The thermostability of GFPuv provides the basis for its potential utility as a fluorescent biologic indicator to assay the efficacy of moist-heat treatments at temperatures lower than 100°C.     

Kinetic Stability Modelling of Keratinolytic Protease P45: Influence of Temperature and Metal Ions

The activity and kinetic stability of a keratinolytic subtilisin-like protease from Bacillus sp. P45 was investigated in 100 mM Tris-HCl buffer (pH 8.0; control) and in buffer with addition of Ca(2+) or Mg(2+) (1-10 mM), at different temperatures. Addition of 3 mM Ca(2+) or 4 mM Mg(2+) resulted in a 26% increment on enzyme activity towards azocasein when compared to the control (100%; without added Ca(2+) or Mg(2+)) at 55 °C. Optimal temperature for activity in the control (55 °C) was similar with Mg(2+); however, temperature optimum was increased to 60 °C with 3 mM Ca(2+), displaying an enhancement of 42% in comparison to the control at 55 °C. Stability of protease P45 in control buffer and with Mg(2+) addition was assayed at 40-50 °C, and at 55-62 °C with Ca(2+) addition. Data were fitted to six kinetic inactivation models, and a first-order equation was accepted as the best model to describe the inactivation of protease P45 with and without metal ions. The kinetic and thermodynamic parameters obtained showed the crucial role of calcium ions for enzyme stability. As biocatalyst stability is fundamental for commercial/industrial purposes, the stabilising effect of calcium could be exploited aiming the application of protease P45 in protein hydrolysis.     

一个简便的配合物稳定常数测定方法-Al-ECR稳定常数的测定

在配合反应体系中,当某一物种不能获得它单独存在时的吸收光谱,即得不到它的摩尔吸光系数时,测定配合物的稳定常数往往比较困难,有时甚至难以解决。Al-ECR即属于这样的体系,众多通用的饱和法不能使用。我们采用过Ingmen的方法亦未能得出合理的结果(时常出现负值)。我们曾报道利用等色点特性求取三元配合物稳定常数的方法。在这里我们利用溶液不同pH时等色点的特性,测定了Al-ECR体系的稳定常数,方法简便,所得结果比较满意。     

Complexing influence of cobalt and nickel ions on the electrochemical reduction of pterin and related compounds at a mercury drop

The effect of Co(2+) and Ni(2+) ions on the electrochemical reduction of pterin and its derivatives, pteroic and pteroylmonoglutamic acids, has been studied. The measurements were carried out in aqueous solutions at fixed pH (7.5 +/- 0.2), temperature (298 +/- 0.2 K) and ionic strength (mu = 1.00; NaClO(4)) using polarographic techniques. By employing cyclic voltammetry and differential pulse polarography displacements were determined of the half-wave potentials E (1 2 ) of ligands of the reducible organic compounds at a dropping mercury electrode. The recorded polarograms and inherent potential differences were then utilized to calculate conditional stability constants of the complexes. The Casassas-Eek method was employed for the interpretation of the potential differences of the free and complexed ligands. The log beta(1) values of the stability constants revealed moderate stability of the complexes. The donor atoms of the ligands in the coordination compounds have also been identified.     

A ratiometric fluorescent chemosensor for iron: discrimination of Fe2+ and Fe3+ and living cell application

A newly designed probe, 6-thiophen-2-yl-5,6-dihydrobenzo[4,5]imidazo-[1,2-c] quinazoline (HL(1)) behaves as a highly selective ratiometric fluorescent sensor for Fe(2+) at pH 4.0-5.0 and Fe(3+) at pH 6.5-8.0 in acetonitrile-HEPES buffer (1/4) (v/v) medium. A decrease in fluorescence at 412 nm and increase in fluorescence at 472 nm with an isoemissive point at 436 nm with the addition of Fe(2+) salt solution is due to the formation of mononuclear Fe(2+) complex [Fe(II)(HL)(ClO(4))(2)(CH(3)CN)(2)] (1) in acetonitrile-HEPES buffer (100 mM, 1/4, v/v) at pH 4.5 and a decrease in fluorescence at 412 nm and increase in fluorescence at 482 nm with an isoemissive point at 445 nm during titration by Fe(3+) salt due to the formation of binary Fe(3+) complex, [Fe(III)(L)(2)(ClO(4))(H(2)O)] (2) with co-solvent at biological pH 7.4 have been established. Binding constants (K(a)) in the solution state were calculated to be 3.88 × 10(5) M(-1) for Fe(2+) and 0.21 × 10(3) M(-1/2) for Fe(3+) and ratiometric detection limits for Fe(2+) and Fe(3+) were found to be 2.0 μM and 3.5 μM, respectively. The probe is a "naked eye" chemosensor for two states of iron. Theoretical calculations were studied to establish the configurations of probe-iron complexes. The sensor is efficient for detecting Fe(3+)in vitro by developing a good image of the biological organelles.     

High-Performance Aqueous Size-Exclusion Chromatography Using Diol-Bonded Porous Glass Packing Materials. Retention Behavior of Some Proteins

Abstract

Retention volume of proteins increased or decreased with increasing phosphate buffer or neutral electrolyte concentrations in the mobile phase. This variation suppressed or accelerated by changing pH values in the mobile phase. The behavior of proteins can be interpreted by knowing isoelectric points (pI) of proteins and pKa value of the residual silanol groups on the surface of diol-bonded porous glasses. Positively charged surface of proteins below pH 8.0 (cytochrome c, lysozyme) retarded the elution by the ion-adsorption effects and negatively charged proteins around pH 7.0 (egg albumin, bovin serum albumin) eluted earlier than expected by the ion-exclusion effects. These effects suppressed by increasing phosphate buffer and neutral electrolyte concentrations in the mobile phase. Size-exclusion separation was attained in the mobile phase over 0.1 M phosphates and 0.1 M NaCl concentrations at pH 7.0. Mcllvaine buffer and Gomori buffer showed opposite action to proteins for retention comparing with Soerensen phosphate buffer. Potassium thiocyanate showed the different action for retention of proteins comparing with other neutral electrolytes and acted like sodium dodecyl sulphonate.     

The interaction of anionic azo dyes with hen egg-white lysozyme: 2

In continuation of our preceding study, this report describes pH and ionic strength dependences of the binding constants of six anionic azo dyes to lysozyme, the competitive binding of the dyes with the substrate analogues of lysozyme and the change in the circular dichroism of lysozyme by the dye binding. The binding constants were obtained from the difference spectra of visible absorption. With an increase in pH from 5.0 to 7.0 the constants for the dyes (1st of the two modes of the binding of a dye named D3) are reduced. The increase in ionic strength from 0.1 to 0.2 also reduces the values of the constant. Competitive binding was found between D3 and the analogues, but not for the other dyes. The change in the circular dichroism due to the electronic perturbation of tryptophyl residues in lysozyme was found. From these evidences, Lys 33 in lysozyme is pinpointed as the most credible binding site for the dyes (1st mode binding of D3). An unspecified location near the subsiteB in lysozyme is addressed for 2nd mode binding of D3.     

Affinity chromatography study of magnesium and calcium binding to human serum albumin: pH and temperature variations

The magnesium and calcium binding on human serum albumin (HSA) was studied using an affinity chromatography approach. The effects of the mobile phase pH, its ionic strength and column temperature on the transfer equilibrium constants were studied. The thermodynamic data corresponding to the electrostatic interactions occurring during the HSA-ion binding were determined. Enthalpy-entropy compensation revealed that the ion binding mechanism at HSA was independent of the ionic strength, the same at four pH values (6.5, 8, 8.5 and 9), but presented a weak change at physiological pH around 7-7.5 due to a HSA phase transition. A theoretical model based on the Gouy-Chapman theory allows to determine the relative charge density of the HSA surface implied in the binding process and the variation of the number of ions bound to one albumin molecule with the pH.     

分光光度法测定络合物稳定常数及摩尔吸光系数的通用算法

提出了一个用单纯形法与线性最小二乘法结合的方法计算络合物稳定的常数及摩尔吸光系 的新算法,并处理了Ｃｊ＾２＋－ＰＡＮ－Ｓ络合体系的数据,求得了该络合物的第一,二级稳定常数。