The use of 1-[pyridyl-(2)-azo]-naphthol-(2) in the presence of TX-100 and N,N'-diphenylbenzamidine for the spectrophotometric determination of copper in real samples

A simple and sensitive field detection and spectrophotometric method for determination of copper described herewith is based on the formation of a red coloured species of copper(II) with 1-[pyridyl-(2)-azo]-naphthol-(2) (PAN), TX-100 and N,N'-diphenylbenzamidine (DPBA) at pH range 7.8-9.4. The red coloured Cu(II)-PAN-(TX-100)-DPBA complex in chloroform shows maximum absorbance at 520 nm with molar absorptivity value of 1.14x10(5) l mol(-1) cm(-1). The detection limit of the method is 2 ng ml(-1) organic phase. The system obeys Beer's law up to 0.6 mug Cu(II) ml(-1) in organic solution. Most of the common metal ions generally found associated with copper do not interfere. The repeatability of the method was checked by finding relative standard deviation (RSD) (n=10) value for solutions each containing 0.2 mug ml(-1) of Cu(II) and the RSD value of the method was found to be 1.5%. The validity of the method has been satisfactorily examined for the determination of copper in soil and airborne dust particulate samples.     

Spectrophotometric studies on the simultaneous determination of cadmium and mercury with 4-(2-pyridylazo)-resorcinol

A new method for direct spectrophotometric determination of cadmium with 4-(2-pyridylazo)-resorcinol is reported. Absorption maximum, molar absorptivity and Sandell's sensitivity of the 1:1 (M:L) complex are 510 nm, 2.5 x 10(5) l mol(-1) cm(-1) and 3.55 ng cm(-2), respectively. A linear calibration graph is obtained up to 4.49 microg ml(-1). The zero-crossing measurement technique is found suitable for the direct measurement of the first-derivative value at the specified wavelengths. Cadmium(II) (0.42-9.2 microg ml(-1)) and mercury(II) (0.35-7.4 microg ml(-1)) in different ratios have been determined simultaneously. A critical evaluation of the proposed method is performed by statistical analysis of the experimental data. The developed method was applied to the simultaneous spectrophotometric determination of Cd and Hg in some synthetic mixtures and was found to give satisfactory results.     

Non-extractive derivative spectrophotometric determination of cobalt in neutral micellar medium

A sensitive derivative spectrophotometric method using 1-nitroso-2-naphthol has been developed for determination of trace amounts of cobalt in the presence of a neutral surfactant. Photometric parameters, viz., lambda(max), molar absorption coefficient and analytical sensitivity of the complex formed in micellar media are 420 nm, 3.18x10(4) l mol(-1) cm(-1) and 2.05 ng ml(-1), respectively. Beer's law holds from 0.20 to 3.0 mug ml(-1) of the analyte concentration. The method has a high sensitivity with a detection limit of 1.68 ng ml(-1). A selective determination of cobalt in presence of copper(II) or iron(III) using derivative spectral profiles and without any masking or pre-separation is also reported. Samples of drugs and standard alloys analysed by the proposed method yielded results comparable to those obtained using recommended procedures.     

Overoxidized polypyrrole doped with 4,5-dihydroxy-3-(p-sulfophenylazo)-2,7-naphthalene disulfonic acid as a selective and regenerable film for the stripping detection of copper(II).

A conducting polymer modified electrode based on the incorporation of 4,5-dihydroxy-3-(p-sulfophenylazo)-2,7-naphthalene disulfonic acid, SPADNS, as an anionic complexing ligand into polypyrrole film during electropolymerization was prepared. The electroanalysis of copper(II) in this modified electrode was achieved by medium exchange and differential pulse voltammetry. Copper ions were accumulated from ammonia buffer on the electrode surface by the formation of a chemical complex at open circuit. The resulting electrode with complexed Cu(2+) was then transferred to an acetate buffer and subjected to anodic stripping voltammetry. The analytical performance was evaluated and, finally, linear calibration graphs were obtained in the concentration range of 2 - 250 ng ml(-1) for Cu(II). The detection limit was found to be 1.1 ng ml(-1) and RSD was obtained at 3.1 and 1.9% for two different concentrations. Many coexisting metal ions had little or no effect on the determination of copper. The developed method was applied to Cu(II) determination in natural water and human hair samples. Also, the rapid and convenient regeneration of electrode allows the use of a single modified electrode in multiple analyses.     

Simultaneous determination of beryllium and aluminium in mixtures using derivative spectrophotometry

The spectrophotometric determination of beryllium and aluminium with 5,8-dihydroxy-1,4-naphthoquinone in the presence of a non-ionic surfactant is reported. Absorption maxima, molar absorptivity and Sandell's Sensitivity of 1:2 (M:L) beryllium and aluminium complexes are, 585 nm and 598 nm, 1.63 x 10(4) l.mole(-1).cm(-1) and 2.04 x 10(4) l.mole(-1).cm(-1), and 0.55 ng/cm(2) and 1.32 ng/cm(2) respectively. Beer's law is obeyed between 7.20-3.96 x 10(2) ng/ml beryllium and 1.08 x 10(1)-1.08 x 10(3) ng/ml aluminium. A method for simultaneous determination of beryllium and aluminium in their mixture using derivative spectra is described. The range 3.6 x 10(1)-3.6 x 10(2) ng/ml beryllium could be determined in the presence of 1.08 x 10(2)-1.08 x 10(3) ng/ml aluminium, and vice versa.     

Cu(II)-3-(5-chlor-2-hydroxy-3-sulfophenylazo)-6-(2,4,6-tribromophenylazo)-4,5-dihydroxynaphthalene-2,7-disulfonic Acid-Co(II) binuclear complexation and its application to the selective determination of cobalt at ng/ml level.

The chromophore, 3-(5-chlor-2-hydroxy-3-sulfophenylazo)-6-(2,4,6-tribromophenylazo)-4,5-dihydroxynaphthalene-2,7-disulfonic acid (CSTDD) was used to complex Cu(II) and Co(II) in aqueous solution at pH 9.43. A binuclear complex of Cu-CSTDD-Co was formed and showed a high selectivity for the determination of Co(II). The spectral correction technique was applied to characterize the complexes. The results showed the formation of complexes of Cu(CSTDD), Co(CSTDD)3 and Cu2(CSTDD)2Co. The quantitative analysis of Co(II) at ng/ml level was carried out by the light-absorption ratio variation approach (LARVA). The results showed that the technique is satisfactory to determine Co(II) at trace level in water samples with a detection limit of 2.3 ng/ml.     

Selective sensing of Cu(II) at ng ml(-1) level based on phosphorescence quenching of 1-bromo-2-methylnaphthalene sandwiched in sodium deoxycholate dimer

Using sodium deoxycholate as a protective medium, the selective recognition of Cu(II) at ng ml(-1) level is realized through dynamic phosphorescence quenching of 1-bromo-2-methylnaphthalene (BMN) without deoxygenation. The limit of detection is 4.32 ng ml(-1), and the relative standard deviation is 1% at 10 microM, linear up to 1 x 10(-5) M.     

Simultaneous voltammetric determination of molybdenum and copper by adsorption cathodic differential pulse stripping method using a principal component artificial neural network

An adsorption differential pulse stripping method for the simultaneous determination of molybdenum and copper based on the formation of their complexes with cupferron (benzene, N-hydroxy-N-nitroso) is proposed. The optimum experimental conditions were obtained 0.010 mM cupferron, pH 3.0, accumulation potential of -0.15 V versus Ag/AgCl, accumulation time of 60 s, scan rate of 10 mV s(-1) and pulse height of 50 mV. Molybdenum and copper peak currents were observed at -0.16 and +0.02 V, respectively. A principal component artificial neural network (PC-ANN) was utilized for the analysis of the voltammogram data. A three layer back-propagation network was used with sigmoidal transfer function for the hidden and the output layers. The linear dynamic ranges were 5.0-60.0 and 0.1-20.0 ng ml(-1) for Cu(II) and Mo(VI), respectively. The detection limit was 0.06 ng ml(-1) for Mo(VI) and 0.20 ng ml(-1) for Cu(II). The capability of the method for the analysis of real samples was evaluated by the determination of molybdenum and copper in river water, tap water, and alloy.     

Determination of platinum metals complexes with 2-(6-methyl-2-benzothiazolylazo)-5-diethylaminophenol by reversed-phase high performance liquid chromatography

The use of 2-(6-methyl-2-benzothiazolylazo)-5-diethylaminophenolas a precolumn derivatizing reagent in the reversed-phase high performance liquid Chromatographic separation and determination of Ru(III), Rh(III), Os(IV), Ir(IV), Pt(II), Co(II), Ni(II) and Cu(II) is reported. When the mobile phase consists of methanol-water (76/24% v/v) and 20 mmol/l (pH 5.0) acetate buffer, the eight complexes can be separated within 35 min on a C₈ column. The detection limits are Ru 7.0, Rh 5.1, Os 1.5, Ir 7.6, Pt 3.7, Co 0.62, Ni 0.14 and Cu 1.2 ng/ml, respectively, at a signal-to-noise ratio of 3. RSDs were typically Ca. 1%.     

Determination of Copper by an Adsorption Differential Pulse Stripping Method with Naphthol Derivative

ABSTRACT

A simple, sensitive and selective method is proposed for the determination of copper(II) by adsorption-differential pulse stripping method. This method is based on the selective accumulation of the complexes of Cu(II) with l-(2-pyridylazo)-2-Naphthol and then reduction of the complex on a HMDE. The reduction current of the complex is about 0.0V vs. Ag/AgCl reference electrode at p8543146=4.0. The influences of various experimental parameters on the current peak were completely studied. The calibration graph was linear up to 50.0 ng/ml for a deposition time of 60 sec. The relative standard deviation was 2.3% (n=5) for Cu(II) concentration of 10.0 ng/ml, with a limit of detection of 0.2 ng/ml. The influence of potentially interfering ions was completely studied. The method has been applied for the determination of Cu(II) in water samples.     

Determination of copper at ng levels by in-line preconcentration and flow-injection analysis coupled with flame atomic-absorption spectrometry

Oxine/formaldehyde/resorcinol and oxine/formaldehyde/hydroquinone resins have been synthesized and their physicochemical properties studied. Conditions were optimized for the preconcentration of copper by batch extraction and column chromatography with the resins. A flow-injection analysis (FIA) manifold was constructed for the determination of copper at ng levels by preconcentration on microcolumns containing the resins, stripping, and atomic-absorption spectrometry. For batch preconcentration a pH of about 2.5-3 was optimal whereas in the FIA system a broader pH range (approximately 2-3.5) could be used. Separations of binary mixtures of Cu(II) with Ni(II) or PB(II) at microg/ml level did not show any cross-contamination. In the FIA, a 2 cm long column and 2 ml/min flow-rate were adequate for quantitative uptake of copper; 50 micro1 of 0.1M hydrochloric acid quantitatively eluted the copper.     

New types of heterospin complexes from trans-oxamido-bridged copper(II) binuclear units and nitronyl nitroxide radicals: crystal structure and magnetic characterization

Three new heterospin complexes derived from trans-oxamido-bridged copper(II) binuclear units [Cu(2)(oxen), oxen = N,N-bis(2-aminoethyl)oxamide] and pyridine-substituted nitronyl nitroxides (o-, m-, and p-PYNN) were synthesized and characterized structurally and magnetically. Complexes 1 and 2 are four-spin complexes. Interestingly, it is found that in complex 3, the Cu(II) ions and m-PYNN units are arranged to form 1D double-stranded helical chains, which to the best of our knowledge is the first example of a metal nitronyl nitroxide complex with such a 1D helical structure. The temperature dependencies of the magnetic susceptibilities of 1 and 2 were fitted to the four-spin model with the Hamiltonian H = -2Js(Cu1)s(Cu2) - 2j(s(Cu1)s(rad1) - s(Cu2)s(rad2)), leading to J = -150.5 cm(-)(1) and j = 47.2 cm(-)(1) for complex 1 and J = -191.7 cm(-)(1) and j = -18.9 cm(-)(1) for complex 2. The temperature dependence of the magnetic susceptibility of complex 3 was approximately simulated with a simple model composed of a dimer of Cu(II) ions and two m-PYNN molecules. The best fitting leads to the values of J = -183.0 cm(-)(1) and zJ' = -0.55 cm(-)(1) for the magnetic exchange of two Cu(II) ions through the oxamide bridge and that between the dimer of Cu(II) ions and two m-PYNN molecules, respectively. The antiferromagnetic exchange of oxamido-bridged Cu(II) ions in complexes 1-3 is strong. The strength of such antiferromagnetic interactions is also similar for the three complexes.     

A nonanuclear copper(II) polyoxometalate assembled around a mu-1,1,1,3,3,3-azido ligand and its parent tetranuclear complex

Reaction of Cu(II), [gamma-SiW10O36]8-, and N3- affords three azido polyoxotungstate complexes. Two of them have been characterized by single-crystal X-ray diffraction. Complex KNaCs10[{gamma-SiW10O36Cu2(H2O)(N3)2}2].26H2O (1) is obtained as crystals in few hours after addition of CsCl. This linear tetranuclear Cu(II) complex consists in two [gamma-SiW10O36Cu2(H2O)(N3)2]6- units connected through two W=O bridges. When the filtrate is left to stand for one night, a new complex is obtained. From both elemental analysis and IR spectroscopy, it has been postulated that this compound could be formulated K(1.5)Cs(5.5)[SiW10O37Cu2(H2O)2(N3)].14 H2O (1 a), showing the loss of one azido ligand per polyoxometalate unit. Finally, when no cesium salt is added to the reaction medium, the nonanuclear complex K12Na7[{SiW8O31Cu3(OH)(H2O)2(N3)}3(N3)].24 H2O (2) is obtained after three days. Compound 2 crystallizes in the R3c space group and consists in three {Cu3} units related by a C3 axis passing through the exceptional mu-1,1,1,3,3,3-azido bridging ligand. Each trinuclear Cu(II) unit is embedded in the [gamma-SiW8O31]10- ligand, an unprecedented tetravacant polyoxometalate, showing that partial decomposition of the [gamma-SiW10O36]8- precursor occurs with time in such experimental conditions. Magnetically, complex 1 behaves as two isolated {Cu2(mu(1,1)-N3)2} pairs in which the metal centers are strongly ferromagnetically coupled (J = +224 cm(-1), g = 2.20), the coupling through the W=O bridges being negligible. The magnetic behavior of complex 2 has also been studied. Relatively weak ferromagnetic couplings (J1 = +1.0 cm(-1), J2 = +20.0 cm(-1), g=2.17) have been found inside the {Cu3} units, while the intertrimeric magnetic interactions occurring through the hexadentate azido ligand have been found to be antiferromagnetic (J3 = -5.4 cm(-1)) and ferromagnetic (J4 = +1.3 cm(-1)) with respect to the end-to-end and end-on azido-bridged Cu(II) pairs, respectively.     

Simultaneous determination of gallium and indium with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in cationic micellar medium using derivative spectrophotometry.

A new derivative spectrophotometric method for rapid and selective trace analysis of Ga3+ and In3+ and for their simultaneous determination using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in a cationic micellar medium is reported. Molar absorptivity and Sandell's sensitivity of 1:1 Ga+ and In3+ complexes at their lambda(max) 553 nm and 558 nm are: 7.22 x 10(4) l mol(-1) cm(-1) and 5.85 x 10(4) l mol(-1) cm(-1), and 0.96 ng cm(-2) and 1.96 ng cm(-2), respectively. Linearity is observed in the concentration range 0.023-0.700 microg ml(-1) for gallium and 0.076-1.52 microg ml(-1) for indium; IUPAC detection limit is 0.012 and 0.035 ng ml(-1), respectively. These metal ions interfere with the determination of each other. However, 0.07-0.70 microg ml(-1) Ga3+ and 0.115-1.150 microg ml(-1) In3+ could be determined simultaneously when present together by the derivative method without any prior separation. The proposed procedures have been successfully applied for the individual and simultaneous determination of gallium and indium in synthetic binary mixtures, standard reference materials and environmental samples.     

The use of phenylfluorone in the presence of cetylpyridinium chloride and Triton X-100 for the spectrophotometric determination of copper(II) in blood serum

A simple and sensitive spectrophotometric method for determination of copper(II) is based on the formation of a blue coloured complex of Cu(II) with 9-phenyl-2,3,7-trihydroxy-6-fluorone (PF) in the presence of cetylpyridinium chloride (CP) and Triton X-100, has been developed. Optimum concentrations of PF, CP, Triton X-100 and pH ensuring maximum absorbance were defined. The complex Cu(II)-PF-CP-Triton X-100 shows maximum absorbance at 595 nm with a molar absorptivity value of 9.67x10(4) l mol(-1) cm(-1). The detection limit of the method is 0.028 mug ml(-1). Beer's law is obeyed for copper concentrations in the range 0.04-0.4 mug ml(-1). The studies of the effect of foreign ions on determination of copper, show that the selectivity of the method is poor. The cations of alkali metals and anions Br(-), Cl(-), I(-), F(-), NO(2)(-), NO(3)(-), CH(3)COO(-), SO(4)(2-), S(2)O(3)(2-), PO(4)(3-), citrates (examined in 1000-fold molar excess over copper) do not affect the determination. All cations forming complexes with PF have an interfering effect. The statistical evaluation of the method was carried out for six determinations using 10 mug of Cu and the following results were obtained: the standard deviation, SD=0.042, the confidence interval mu(95)=10.1+/-0.1 mug Cu. The method has been applied for determination of copper in blood serum.     

Simultaneous determination of manganese and zinc in mixtures using first- and second-derivative spectrophotometry

A new direct spectrophotometric determination of manganese with 5,8-dihydroxy-1,4-naphthoquinone (naphthazarin,NAZA) is reported. Absorption maximum, molar absorptivity and Sandell's sensitivity of 1:2 (M:L) complex are 695 nm, 1.88x10(4) l mol(-1) cm(-1) and 2.92 ng cm(-2), respectively. A linear calibration graph is obtained up to a concentration of 7.2 mug ml(-1) of manganese. The optimum range for determination (Ringbom) is between 0.20 and 6.8 mug ml(-1). A rapid method for simultaneous determination of manganese and zinc in their mixture using derivative spectra is described. The range 0.28-5.6 mug ml(-1) manganese could be determined in the presence of 0.33-6.8 mug ml(-1) zinc and vice versa. The developed method was applied to the simultaneous spectrophotometric determination of manganese and zinc in some synthetic mixtures and was found to give satisfactory results.     

Structural and spectroscopic characterization of copper(II) complexes of a new bisamide functionalized imidazole tripod and evidence for the formation of a mononuclear end-on Cu-OOH species

A new polyimidazole tripod N,N-bis((1-methyl-4-pivalamidoimidazol-2-yl)methyl)-N'-((1-methylimidazol-2-yl)methyl)amine (L2) has been synthesized and shown to form intramolecular hydrogen bonds with different axial ligands bonded to Cu(II) in the solid state. The same hydrogen-bonding property of L2 appears responsible for the stabilization of a Cu(II)-OOH species in solution. The crystal structures of L2 and three of its Cu(II) complexes are reported. The [Cu(L2)X]ClO4 complexes, 4-6 (X- = Cl-, OH-, or N3-) have distorted trigonal bipyramidal geometries in the solid state and have been characterized further by UV-vis absorption, electron paramagnetic resonance (EPR) spectroscopy, and cyclic voltammetry. The reaction of [Cu(L2)OH](ClO4) (5) with H2O2 and tert-butyl hydroperoxide in methanol generates [Cu(L2)OOH](ClO4) (7) and [Cu(L2)OO(t)Bu](ClO4) (8) which have been characterized by different spectroscopic methods. The compound [Cu(L2)OO(t)Bu]+ displays a band at 395 nm (epsilon = 950 M(-1) cm(-1)) assigned to an alkylperoxo pi*(sigma) --> Cu ligand-to-metal charge transfer (LMCT) transition, while [Cu(L2)OOH]+ displays a peroxo pi*(sigma) --> Cu charge-transfer transition at 365 nm with epsilon = 1300 M(-1) cm(-1), a mass ion at m/z 593.4, and nu(O-O) stretch (resonance Raman) at 854 cm(-1) that shifts to lower energy by 46 cm(-1) upon 18O substitution.     

Determination of anti-inflammatory drugs in water samples, by in situ derivatization, solid phase microextraction and gas chromatography-mass spectrometry

In this work, the reactions of various copper ions with 1,3,3-trimethyl-2-[5-(1,3,3-trimethyl-1,3-dihydro-indol-2-ylidene)-penta-1,3-dienyl]-3H-indolium--more commonly known as dimethylindodicarbocyanine polymethyne dye (DIDC)--as well as the application of the results obtained for the development of a spectrophotometric method for the determination of Cu(I), Cu(II) and Cu(III) are described. Cu(I) and Cu(II) in the presence of chloride ions and DIDC reagent are extractable by a variety of organic solvents. It is important to emphasize that Cu(I) was extracted under considerably different experimental conditions than Cu(II). The optimum conditions for the extraction of the Cu ion associates with DIDC by amyl acetate and the determination of Cu(I) and Cu(II) were found to be: pH 3-5 and pH 3-6 and chloride concentrations of 0.5-0.8 mol L(-1) and 3-6 mol L(-1) for Cu(I) and Cu(II), respectively. The molar absorptivities for Cu(I) and Cu(II) are 1.8x10(5) L mol(-1) cm(-1) and 1.2x10(5) L mol(-1) cm(-1), respectively. A reaction mechanism is suggested. Cu(III) does not extract in the presence of chloride ions. However, Cu(III) is a strong oxidative agent which can cause the decolourisation of the DIDC reagent. The optimum conditions for Cu(III) determination were found to be: 2x10(-5) mol L(-1) DIDC; pH 8; water:acetone 4:1 medium. The developed procedures were tested for the determination of Cu(I), Cu(II) and Cu(III) in semiconductor samples.     

Assembly of trinuclear and tetranuclear building units of Cu2+ towards two 1D magnetic systems: synthesis and magneto-structural correlations

Two new 1D coordination polymers, [Cu(3)(μ(3)-OH)(ppk)(3)(μ-N(CN)(2))(OAc)](n) (1) and {[Cu(4)(pdmH)(2)(pdm)(2)(μ(2)-OH)(H(2)O)]·ClO(4)}(n) (2) based on two different blocking ligands phenyl-2-pyridylketoxime (ppk) and pyridine-2,6-dimethanol (pdmH(2)) have been synthesized and were characterized by X-ray single crystal structural analysis. In compound 1, the hydroxido-bridged trinuclear core, {Cu(3)(μ(3)-OH)(ppk)(3)(OAc)}, acts as secondary building units and are connected by the N(CN)(2)(-) anions resulting in a one dimensional (1D) coordination polymer. The 1D coordination chains undergo π-π interactions giving rise to a 3D supramolecular framework. In compound 2, tetrameric [Cu(4)(pdmH)(2)(pdm)(2)(H(2)O)](2+) cores are linked via hydroxido groups forming a zigzag 1D coordination chain where non-coordinated ClO(4)(-) ions are intercalated between the chains. Variable temperature magnetic susceptibility study of suggests that Cu(II) ions in the trinuclear Cu(3)(μ(3)-OH) cores are antiferromagnetically coupled with J = -459.7 cm(-1) and g = 2.11 and the trinuclear cores are further weakly coupled antiferromagnetically (zj' = -5.25 cm(-1)) through the N(CN)(2)(-) bridging ligand. Investigation of the magnetic properties of reveals that Cu(II) ions are coupled antiferromagnetically in the tetranuclear core with J = -27.1 cm(-1) and g = 2.17; the Cu(II)(4) building units are further coupled antiferromagnetically with zj' = -9.65 cm(-1). The experimental magnetic behaviours of 1 and 2 are correlated by first principle DFT calculations which provide a qualitative understanding of the origin of antiferromagnetic interactions in both cases.     

Spectrophotometric and derivative spectrophotometric determination of aluminium with Hydroxynaphthol Blue

The reaction of aluminium(III) with Hydroxynaphtol Blue (HNB) in aqueous media at apparent pH 5.5 results in a red complex that is stable for at least 4 hr. Beer's Law is obeyed up to 1.6 microg/ml of aluminium(III) with an apparent molar absorptivity of 1.66 x 10(4) l.mol(-1). cm(-1) at 569 nm. This paper proposes procedures for aluminium(III) determination by ordinary and first-derivative spectrophotometry. The results demonstrated that the linear dynamic range is 0.03-1.60 microg/ml for ordinary spectrophotometry and 11.8-320.0 ng/ml for first derivative spectrophotometry. The HNB is not selectivity for aluminium, but the addition of EDTA allows the aluminium determination in the presence of accepted amounts of Ca(II), Mg(II), Mn(II), Ba(II), Sr(II), Cd(II), Pb(II), La(III), In(III), Bi(III) and Zn(II). The interference of Cu(II) and Hg(II) can be masked by thiosulphate. Ions such as UO(2)(II), Mo(VI), Co(II), Ti(IV) and PO(4)(III) do interfere seriously. This method was applied for aluminium determination in copper-base alloy, zinc-base alloy, magnesium-base alloy, iron ore, manganese ore, cement, dolomite, feldspar and limestone. The results indicated high accuracy and precision.