Extraction of sodium and potassium picrates with 15-(2,5-dioxahexyl)-15-methyl-16-crown-5 (lariat 16C5) into various organic solvents. Elucidation of fundamental equilibria which determine the extraction ability for Na(+) and K(+) and the selectivity

To quantitatively elucidate the effects of the side chains and diluents on the extraction selectivity for sodium and potassium picrates of 15-(2,5-dioxahexyl)-15-methyl-16-crown-5 (L16C5) from the viewpoint of equilibrium, the constants for the overall extraction (K(ex)), the partition for various diluents of low dielectric constants (K(D,MLA)), and the aqueous ion-pair formation (K(MLA)) of L16C5-sodium and -potassium picrate 1:1:1 complexes were determined at 25 degrees C; the distribution constants of L16C5 were also measured at 25 degrees C. The log K(MLA) values for Na(+) and K(+) are 2.74+/-0.29 and 1.70+/-0.36, respectively. In going from 16-crown-5 (16C5) to L16C5, the side chains decrease the K(MLA) value, but do not increase the difference in K(MLA) between Na(+) and K(+). The distribution behavior of L16C5 and its 1:1:1 complexes with the alkali metal picrates closely obeys regular solution theory, except for chloroform. Molar volumes and solubility parameters of L16C5 and the 1:1:1 complexes were determined. The magnitude of K(ex) is mainly governed by the K(M(L16C5)A) value. For every diluent, L16C5 shows Na(+) extraction selectivity over K(+). The Na(+) extraction selectivity of L16C5 is determined completely by K(M(L16C5)A). The extraction ability and selectivity for sodium and potassium picrates by L16C5 are compared with those of 16C5 on the basis of the fundamental equilibrium constants.     

Extraction of sodium and potassium perchlorates with benzo-18-crown-6 into various organic solvents. Quantitative elucidation of anion effects on the extraction-ability and -selectivity for Na(+) and K(+)

To investigate quantitatively the anion effect on the extraction-ability and -selectivity of benzo-18-crown-6 (B18C6) for alkali metal ions, the constants for overall extraction into various diluents having low dielectric constants (K(ex)) and aqueous ion-pair formation (K(MLA)) of B18C6-sodium and potassium perchlorate 1:1:1 complexes (MLA) were determined at 25 degrees C. The K(ex) value was analyzed by the four fundamental equilibrium constants. The K(MLA) values were determined by applying our established method to this perchlorate extraction system. The K(M(B18C6)A) value of the perchlorate is much larger for K(+) than for Na(+), and is much smaller than that of the picrate. The K(M(B18C6)A) value makes a minor contribution to the magnitude of K(ex) for the perchlorate system, but a major contribution to that for the picrate one. The distribution behavior of the B18C6 1:1:1 complexes with the alkali metal perchlorates follows the regular solution theory. For the diluent with a high dipole moment, however, the 1:1:1 complexes somewhat undergo the dipole-dipole interaction. B18C6 always shows very high extraction selectivity for KClO(4) over NaClO(4), which is determined mostly by the much greater log/(log K(MLA)) value for K(+) than for Na(+). The extraction-ability and -selectivity of B18C6 for Na(+) and K(+) ions with a perchlorate ion were compared with those with a picrate ion in terms of the fundamental equilibrium constants. The K(+) extraction-selectivity of B18C6 over Na(+) for the perchlorate system is superior to that for the picrate one, which is caused largely by the greater log/(log K(K(B18C6)A))-log/(log K(Na(B18C6)A)) value for the perchlorate than for the picrate. The perchlorate system is recommended for extraction separation of K(+) from Na(+).     

Solvent effects on extraction of alkali metal picrates with 15-crown-5 into various organic solvents. Elucidation of fundamental equilibria which govern extraction-efficiency and -selectivity

Extractions of alkali metal (Na-Cs) picrates (MA) with 15-crown-5 (15C5) into various diluents of low dielectric constant were conducted at 25 degrees C. Using the extraction data, the ion-pair formation constants (K(MLA)) in water of 15C5-MA 1:1:1 complexes were determined by an equation derived from the regular solution theory (logK(MLA)=4.43+/-0.27 for Na, 3.27+/-0.42 for K, 3.58+/-0.35 for Rb, and 2.78+/-0.41 for Cs). The actual overall extraction equilibrium constants were obtained by considering the concentrations of the 1:1:1 15C5 complexes and the ion-pair formation between uncomplexed alkali metal and picrate ions in the aqueous phase. The distribution constants of the 15C5 complexes were calculated and their partition behavior is explained by the regular solution theory. Molar volumes and solubility parameters of 15C5 itself and the complexes were determined. Extraction-efficiency and -selectivity of 15C5 for alkali metal picrates were completely elucidated from the standpoint of equilibrium.     

Hydration effect on the ion-pair extraction of lithium picrate by hydrophobic benzo-15-crown-5 ether into various less-polar diluents.

The ion-pair formation constant (K(MLA)(0) in mol(-1) dm(3)) for Li(B15C5)(+) with a picrate ion (Pic(-)) in water was determined by potentiometry with a K(+)-selective electrode at 25 degrees C and an ionic strength of 0, where B15C5 denotes benzo-15-crown-5 ether. Using the concentration equilibrium constants, K(MLA), estimated from this value, the extraction constants (mol(-2) dm(6) unit) of about ten diluents were re-calculated from previously reported extraction data. Also, the distribution constants of an ion-pair complex, Li(B15C5)Pic, between water and the diluents were re-estimated. A disagreement in the determined K(MLA) value between a solvent-extraction method and potentiometry was explained in terms of the Scatchard-Hildebrand equation; it came from the fact that the hydration of Li(I) in Li(B15C5)Pic was larger than that of free B15C5 in water. Then, the previously determined value by the former method was re-estimated using the potentiometric K(MLA) value.     

Extraction of Alkali Metal (Li, Na, K) Picrates with Benzo-15-crown-5 into Various Organic Solvents. Elucidation of Fundamental Equilibria Determining the Extraction-ability and -selectivity

To quantitatively elucidate the effects of the benzo group on the extraction-selectively and -ability of benzo-15-crown-5 (B15C5)for alkali metal ions, the constants of the overall extraction (K_ex), thedistribution for various diluents having low dielectric constants (K_D,MLA), and the aqueousion-pair formation (K_MLA) of B15C5-alkali metal (Li, Na, K) picrate 1:1:1 complexes (MLA) weredetermined at 25 °C. The partition constants of B15C5were also measured at 25 °C. The log K_MLA values for Li⁺, Na⁺, and K⁺ are -0.32 ± 0.22, 2.66 ± 0.19, and 0.71 ± 0.47, respectively. In going from 15-crown-5 (15C5) to B15C5, the benzo group considerably decreasesthe K_MLA value for the same alkali metal ion. The distributionbehavior of B15C5 and its 1:1:1 complexes with the alkali metal picrates closely obeys regularsolution theory, omitting chloroform. Molar volumes and solubility parameters of B15C5and the 1:1:1 complexes were determined. For every diluent, the K_ex valuefor B15C5 increases in the order Li⁺ < K⁺ < Na⁺. K_D,MLA makes anunfavorable contribution to the Na⁺ extraction-selectivity of B15C5 because of the smallest molar volume of the Na(B15C5)A complex. The Na⁺ extraction-selectivity of B15C5 is determined completely by much the highest K_Na(B15C5)A value.The extraction-ability and -selectivity of B15C5 for the alkali metal picrates are compared with those of 15C5on the basis of the underlying equilibrium constants.     

Evaluation of the Hydrophilic Property of Sodium Ion-pair Complexes with 3m-Crown-m Ethers (m = 5, 6) and Their Benzo-derivatives by Solvent Extraction

The ion-pair formation constants {K(j)(0): j = MA (metal salt), MLA} of NaO(2)CCF(3) (Na(+)tfa(-)) and its ion-pair complexes (MLA) in water (w) were determined potentiometrically at 25 degrees C and an ionic strength (I) of zero. 15-Crown-5 (15C5), 18-crown-6 ethers (18C6), and their mono-benzo derivatives were used as crown ethers (L). The extraction of Natfa by these four L from w into 1,2-dichloroethane was done at 25 degrees C, and then the extraction constants (K(ex)) for NaLtfa were calculated by using the K(j) values, which were estimated from the corresponding K(j)(0) ones at I of the w-phases, and other equilibrium constants. Also, the distribution constants (K(D,MLA)) of NaLtfa between the two phases were obtained from a thermodynamic cycle expressing K(ex). An interaction of w-molecules with NaLA was considered using a relation of log K(D,MLA) with log K(D,L), derived from the Scatchard-Hildebrand equation, where K(D,L) denotes the distribution constant of L between the two phases. The interaction increased in the order of NaL (picrate) < free L 相似文献   

Extraction of Alkali Metal (Na—Cs) Picrates with Dibenzo-18-crown-6 into Various Organic Solvents. Elucidation of Fundamental Equilibria which Govern the Extraction-Ability and -Selectivity

In order to quantitatively investigate effects of the size, the structuralrigidity, and the lipophilicity of dibenzo-18-crown-6 (DB18C6) on itsextraction-ability and -selectivity for alkali metal ions, constants of theoverall extraction (Kex), the distribution for various diluents of lowdielectric constants (K_D,MLA), and the aqueous ion-pairformation (K_MLA) of DB18C6-alkali metal (Na-—Cs) picrate 1:1:1 complexes were determined at 25°C; the partition constants of DB18C6 itself were also measured at 25°C. The log K_MLA of Na, K, Rb, and Cs are -0.14 ± 0.11, 1.30 ± 0.10, 1.00 ± 0.09, and 0.24 ± 0.11, respectively. The partition behavior of DB18C6 and its1:1:1 complexes with the alkali metal picrates can be clearly explained byregular solution theory, except for chloroform. The molar volumes andsolubility parameters of DB18C6 and the 1:1:1 complexes were determined.A relation between molar volumes of the complexes and K_MLAis discussed. The magnitude of Kex is largely determined by that ofK_D,MLA. For every diluent, the extraction selectivity of DB18C6increases in the order Na > Cs > Rb > K. The K extraction-selectivity of DB18C6 over Na is the highest among all the combinations of the two neighboring alkali metals in the periodic table. The extraction-ability and -selectivity for the alkalimetal picrates and their change with the diluent of DB18C6 were completely elucidated by the four fundamental equilibria and regular solution theory.     

The solvent extraction of alkali metal picrates with 4,13-N,N'-dibenzyl-4,13-diaza-18-crown-6

Extraction of alkali metal picrates with N,N'-dibenzyl-18-crown-6 was carried out, with dichloromethane as water-immiscible solvent, as a function [ligand]/[metal cation]. The extractability of metal picrates (Li(+), Na(+), K(+), Rb(+), Cs(+)) was evaluated as a function of [L]/[M(+)]. The extractability of complex cation-picrate ion pairs decreases in this sequence: Li(+)>Rb(+)>Cs(+)>K(+)>Na(+). The overall extraction equilibrium constants (K(ex)) for complexes of N,N'-dibenzyl-18-crown-6 with alkali metal picrates between dichloromethane and water have been determined at 25 degrees C. The values of the extraction constants (logK(ex)) were determined to be 10.05, 6.83, 7.12, 7.83, 6.73 for Li(+), Na(+), K(+), Rb(+) and Cs(+) compounds, respectively. DB186 shows almost 2-fold extractability against Li(+) compared to the other metal picrates, whereas it shows no obvious extractability difference amongst the other metal cations when [L]/[M(+)] is 0.2-1. However, an increasing extractability is observed for Cs(+) when [L]/[M(+)] [1].     

Conductance study of the complexation of substituted and lariat 16-crown-5 derivatives with alkali metal ions in nonaqueous solvents

Formation constants (K _ML) of 1:1 complexes of 15-(2,5-dioxahexyl)-15-methyl-16-crown-5 (L16C5) and 15,15-dimethyl-16-crown-5 (DM16C5) with alkali metal ions were determined in acetonitrile (AN) and propylene carbonate (PC) by conductometry at 25°C. Except for the case of Li⁺-and K⁺-16C5 complexes in PC, the selectivity sequences of L16C5 and DM16C5 are identical with those of the parent crown ether 16-crown-5 (16C5) regardless of the solvent (AN, PC, methanol) (Na¹ > Li⁺ > K⁺ > Rb⁺ > Cs⁺), which show the size-fit correlation. The selectivities of L16C5 and DM16C5 for the alkali metal ions are governed not by the sidearms but by the cavity size. The stability of the crown ether complex is dependent not on the dielectric constant but largely on the donor number of the solvent. TheK _ML(M₁ ⁺)/K _ML(M₂ ⁺) ratio of L16C5 or 16C5 varies very much with the solvent in the cases of M₁=Na, M₂=K and M₁=Na, M₂=Li, but that of DM16C5 is almost constant regardless of the solvent.     

Equilibrium studies on complexation in water and solvent extraction of zinc(II) and cadmium(II) with benzo-18-crown-6

The formation constants (K(ML)) in water of 1:1 complexes of benzo-18-crown-6 (B18C6) and 18-crown-6 (18C6) with Zn(2+) and Cd(2+), the sizes of which are much smaller than the ligand cavities, were determined at 25 degrees C by conductometry. Compared with Cd(2+), the crown ethers form more stable complexes with Zn(2+) although the size of Zn(2+) is less suited for the cavities. B18C6 forms a more stable complex with each metal ion than 18C6. Moreover, the extraction equilibria of these metal ions (M(2+)) with B18C6 (L) for the benzene/water system in the presence of picric acid (HA) were investigated at 25 degrees C. The association between L and HA in benzene was examined for evaluating the intrinsic extraction equilibria of M(2+) with B18C6. The extracted species were found to be MLA(2) and ML(2)A(2), and the overall extraction constants (K(ex,1) and K(ex,2), respectively) were obtained. The values of K(ex,1) for these metal ions are almost the same, but the K(ex,2) is larger for Zn(2+) than for Cd(2+). The extraction selectivity was interpreted quantitatively by the constituent equilibrium constants, i.e. K(ML), the ion-pair extraction constant of ML(2+) with A(-), and the adduct formation constant of MLA(2) with L in benzene.     

Chromenone 12-crown-4 substituted zinc phthalocyanine complexes: investigation of spectral, photophysical and photochemical properties

The synthesis of novel 6,7-[(12-crown-4)-3-[p-(3,4-dicyanophenoxy)phenyl]coumarin (1), 6,7-[(12-crown-4)-3-[p-(2,3-dicyanophenoxy)phenyl]coumarin (2), and their corresponding tetra-(chromenone 12-crown-4)-substituted zinc (II) phthalocyanine complexes (3 and 4) have been prepared. These new compounds have been characterized by elementel analysis, (1)H NMR (1 and 2), MALDI-TOF, IR and UV-Vis spectral data. The fluorescence intensity changes for 1 and 2 by addition of Na(+) or K(+) ions have been determined at 25°C in THF. Intensity of the binding Na(+)- and K(+)-complexes (1 and 2) have decreased. The effects of the chromenone crown ether on the phthalocyanine molecule concerning photophysical and photochemical properties are also investigated. Photodegredation, singlet oxygen, fluorescence quantum yields, and fluorescence lifetimes of zinc phthalocyanine complexes (3 and 4) are also examined in DMSO.     

Extraction equilibria of various metal picrates with 19-crown-6 between benzene and water. Effect of the extra methylene group on extraction ability and selectivity

The overall extraction equilibrium constants (K(ex)) of picrates of Li(+), Na(+), K(+), Rb(+), Cs(+), Ag(+), Tl(+), and Sr(2+)with 19-crown-6 (19C6) were determined between benzene and water at 25 degrees C. The K(ex) values were analyzed into the constituent equilibrium constants, i.e. the extraction constant of picric acid, the distribution constant of the crown ether, the formation constant of the metal ion-crown ether complex in water, and the ion-pair extraction constant of the complex cation with the picrate anion. The effects of an extra methylene group of 19C6 on the extraction ability and selectivity are discussed in detail by comparing the constituent equilibrium constants of 19C6 with those of 18-crown-6 (18C6). The K(ex) value of 19C6 for each metal ion is lower than that of 18C6, which is mostly attributed to the higher lipophilicity of 19C6. The extraction ability of 19C6 for the univalent metal ions decreases in the order Tl(+)>K(+)>Rb(+)>Ag(+)>Cs(+)>Na(+)Li(+), which is the same as that observed for 18C6. The difference in logK(ex) between the univalent metals is generally smaller for 19C6 than for 18C6. The extraction selectivity of 19C6 is governed by the selectivity in the ion-pair extraction, whereas that of 18C6 depends on both the selectivities in the ion-pair extraction and in the complexation in water.     

Ion-pair extraction of Na(+), K(+) and Ca(2+) with some organic counter-ions and dicyclohexyl-18-crown-6 as adduct-forming reagent

Extraction equilibria of ion-pairs formed by the Na(+), K(+) and Ca(2+) complexes of dicyclohexyl-18-crown-6 and beta- and gamma-dinitrophenol, picric acid and dipicrylamine have been studied in the two-phase system H(2)O/CH(2)Cl(2). Extraction constants and dissociation constants for the ion-pairs in the organic phase are given and show that the efficiency of extraction increases with the hydrophobicity of the counter-ion. At the same time, the selectivity decreases.     

Thermodynamic study of solvent extraction of 15-crown-5- and 18-crown-6-s-block metal ion complexes and tetraalkylammonium ions with picrate anions into chloroform

Enthalpy and entropy changes for ion-pair extractions of tetraalkylammonium ions (R(4)N(+)) with picrate anions, overall extractions of s-block metal picrates with 15-crown-5 (15C5) and 18-crown-6 (18C6) and the partition of 15C5 itself were determined between chloroform and water. The distribution behaviour of crown ethers and the extraction process of s-block metal picrates with the crown ethers are discussed in detail on molecular grounds from the thermodynamic point of view. Moreover, enthalpy and entropy changes for ion-pair extractions of 1:1 15C5- and 18C6-s-block metal ion complexes with picrate anions are calculated from these experimental thermodynamic parameters and the literature values for complex-formation reactions of the crown ethers with the s-block metal ions in water. Enthalpy and entropy changes are negative for overall extractions of all the s-block metal picrates with 15C5 and 18C6. The extractions of the metal picrates with 15C5 and 18C6 at 25 degrees are completely enthalpy driven. Plots of thermodynamic parameters for ion-pair extractions of R(4)NA vs. the number of carbon atoms of R(4)N(+) show a linear relationship. From these experimental data, contributions of a methylene group and an ether oxygen atom to the thermodynamic parameters of the ion-pair extraction of R(4)NA and the partition of the crown ethers, respectively, between chloroform and water were obtained. Enthalpy and entropy changes for ion-pair extractions of 15C5- and 18C6-s-block metal picrate complexes were compared with those of R(4)NA. A striking difference in the ion-pair extraction process was found between the crown ether complexes and R(4)NA.     

Fencing of Photoinduced Electron Transfer in Nonconjugated Bichromophoric System by β-cyclodextrin Nanocavity

²³Na NMR measurements were employed to monitor the stability of Na⁺ ion complexes with 18-crown-6 (18C6), dicycloxyl-18-crown-6 (DC18C6), dibenzo-18-crown-6 (DB18C6), 15-crown-5 (15C5) and benzo-15-crown-5 (B15C5) in binary acetonitrile–dimethylformamide mixtures of varying composition. In all cases, the variation of ²³Na chemical shift with [crown]/[Na⁺] mole ratios indicated the formation of 1:1 complexes. The formation constants of the resulting complexes were evaluated from computer fitting of the mole ratio data to an equation which relates the observed chemical shifts to the formation constants. It was found that, in pure acetonitrile, the stabilities of the resulting 1:1 complexes vary in the order 15C5>DC18C6>B15C5>18C6>DB18C6, while in pure dimethylformamide the stability order is DC18C6>18C6>15C5>B15C5>DB18C6. The observed changes in the stability order could be related to the specific interactions between some crown ethers and acetonitrile. It was found that, in the case of all complexes, an increase in the percentage of dimethylformamide in the solvent mixtures would significantly decrease the stability of the complexes.     

Extraction of Sodium and Potassium Perchlorates with Dibenzo-18-crown-6 into Various Organic Solvents. Quantitative Elucidation of Anion Effects on the Extraction-Ability and -Selectivity

The constants for overall extraction into various diluents of low dielectric constants (K_ex) and aqueous ion-pair formation (K_MLA) of dibenzo-18-crown-6 (DB18C6)–sodium and potassium perchlorate 1:1:1 complexes (MLA) were determined at 25°C. The K_ex value was analyzed by the four underlying equilibrium constants. The K_MLA values were determined by applying our established method to this DB18C6/alkali metal perchlorate extraction system. The K_M(DB18C6)A value of the perchlorate is much greater for K⁺ than for Na⁺, and is much smaller than that of the picrate. The K_MLA value makes a negative contribution to the extractability of DB18C6 for MClO₄, whereas the value of the MLA distribution-constant does a major one. The partition behavior of M(DB18C6)ClO₄ obeys the regular solution theory. However, the M(DB18C6)ClO₄ complexes in the diluent of high dipole moment somewhat undergo the dipole–dipole interaction. DB18C6 always shows high extraction selectivity for KClO₄ over NaClO₄, which is governed largely by the much greater K_MLA value for K⁺ than for Na⁺. The K⁺ extraction-selectivity of DB18C6 over Na⁺ for perchlorate ions is comparable to that for picrate ions. By comparing this perchlorate system with the picrate one, the anion effects on the extraction-efficiency and -selectivity of DB18C6 for Na⁺ and K⁺ was discussed in terms of the fundamental equilibrium constants.     

Selective binding of monovalent cations to the stacking G-quartet structure formed by guanosine 5'-monophosphate: a solid-state NMR study

We report a solid-state multinuclear ((23)Na, (15)N, (13)C, and (31)P) NMR study on the relative affinity of monovalent cations for a stacking G-quartet structure formed by guanosine 5'-monophosphate (5'-GMP) self-association at pH 8. Two major types of cations are bound to the 5'-GMP structure: one at the surface and the other within the channel cavity between two G-quartets. The channel cation is coordinated to eight carbonyl oxygen atoms from the guanine bases, whereas the surface cation is close to the phosphate group and likely to be only partially hydrated. On the basis of solid-state (23)Na NMR results from a series of ion titration experiments, we have obtained quantitative thermodynamic parameters concerning the relative cation binding affinity for each of the two major binding sites. For the channel cavity site, the values of the free energy difference (Delta G degrees at 25 degrees C) for ion competition between M(+) and Na(+) ions are K(+) (-1.9 kcal mol(-1)), NH(4)(+) (-1.8 kcal mol(-1)), Rb(+) (-0.3 kcal mol(-1)), and Cs(+) (1.8 kcal mol(-1)). For the surface site, the values Delta G degrees are K(+) (2.5 kcal mol(-1)), NH(4)(+) (-1.3 kcal mol(-1)), Rb(+) (1.1 kcal mol(-1)), and Cs(+) (0.9 kcal mol(-1)). Solid-state NMR data suggest that the affinity of monovalent cations for the 5'-GMP structure follows the order NH(4)(+) > Na(+) > Cs(+) > Rb(+) > K(+) at the surface site and K(+) > NH(4)(+) > Rb(+) > Na(+) > Cs(+) > Li(+) at the channel cavity site. We have found that the cation-induced stability of a 5'-GMP structure is determined only by the affinity of monovalent cations for the channel site and that the binding of monovalent cations to phosphate groups plays no role in 5'-GMP self-ordered structure. We have demonstrated that solid-state (23)Na and (15)N NMR can be used simultaneously to provide mutually complementary information about competitive binding between Na(+) and NH(4)(+) ions.     

UV and IR spectroscopic studies of cold alkali metal ion-crown ether complexes in the gas phase

We report UV photodissociation (UVPD) and IR-UV double-resonance spectra of dibenzo-18-crown-6 (DB18C6) complexes with alkali metal ions (Li(+), Na(+), K(+), Rb(+), and Cs(+)) in a cold, 22-pole ion trap. All the complexes show a number of vibronically resolved UV bands in the 36,000-38,000 cm(-1) region. The Li(+) and Na(+) complexes each exhibit two stable conformations in the cold ion trap (as verified by IR-UV double resonance), whereas the K(+), Rb(+), and Cs(+) complexes exist in a single conformation. We analyze the structure of the conformers with the aid of density functional theory (DFT) calculations. In the Li(+) and Na(+) complexes, DB18C6 distorts the ether ring to fit the cavity size to the small diameter of Li(+) and Na(+). In the complexes with K(+), Rb(+), and Cs(+), DB18C6 adopts a boat-type (C(2v)) open conformation. The K(+) ion is captured in the cavity of the open conformer thanks to the optimum matching between the cavity size and the ion diameter. The Rb(+) and Cs(+) ions sit on top of the ether ring because they are too large to enter the cavity of the open conformer. According to time-dependent DFT calculations, complexes that are highly distorted to hold metal ions open the ether ring upon S(1)-S(0) excitation, and this is confirmed by extensive low-frequency progressions in the UVPD spectra.     

Competitive cesium-133 NMR spectroscopic study of complexation of different metal ions with dibenzo-21-crown-7 in acetonitrile-dimethylsulfoxide and nitromethane-dimethylsulfoxide mixtures

(133)Cs NMR spectroscopy was used to determine the stoichiometry and stability of the Cs(+) ion complex with dibenzo-21-crown-7 (DB21C7) in acetonitrile-dimethylsulfoxide (96.5:3.5, w/w) and nitromethane-dimethylsulfoxide (96.5:3.5, w/w) mixtures. A competitive (133)Cs NMR technique was also employed to probe the complexation of Na(+), K(+), Rb(+), Ag(+), Tl(+), NH(4)(+), Mg(2+), Ba(2+), Hg(2+), Pb(2+) and UO(2)(2+) ions with DB21C7 in the same solvent systems. All the resulting 1:1 complexes in nitromethane-dimethylsulfoxide were more stable than those in acetonitrile-dimethylsulfoxide solution. In both solvent systems, the stability of the resulting complexes was found to vary in the order Rb(+)>K(+) approximately Ba(2+)>Tl(+)>Cs(+)>NH(4)(+) approximately Pb(2+)>Ag(+)>UO(2)(2+)>Hg(2+)>Mg(2+)>Na(+).     

Spectrophotometric study of the alkali metal-murexide complexes in some non-aqueous solutions

The complexes of murexide with alkali-metal cations have been studied spectrophotometrically in methanol, dimethylformamide and dimethylsulphoxide media at 25 degrees . The stoichiometry of the complexes was found to be 1:1. The formation constants of the complexes were determined, and found to decrease in the order Na(+) > K(+) > Rb(+) approximately Li(+) for all solvents studied. The complex formation constants varied inversely with the Gutmann donicity of the solvents.