Anion selective polymeric membrane electrodes based on cyclopalladated amine complexes

The potentiometric anion selectivity of two polymer membrane based electrodes (I and II) formulated with two new cyclopalladated amine complexes as the active components are examined. The electrodes exhibit a non-Hofmeister selectivity pattern with a significantly enhanced response towards thiocyanate, iodide and nitrite. The graph potential versus log c is linear over the concentration range 10(-6)-6x10(-2) M thiocyanate with electrode I and 10(-6)-10(-3) M with electrode II; 10(-5)-10(-2) M iodide with electrode I and 10(-3)-6x10(-2) M with electrode II; and 10(-3)-6x10(-2) M nitrite with both electrodes. The influence of the plasticizer and pH are studied. The potentiometric selectivity coefficients for I, II and blank membrane electrodes are reported. The selective interaction between Pd(II) thiocyanate, iodide and nitrite is postulated to be the reason for its higher response.     

Iodide-Selective PVC Membrane Electrodes Based on Five Transitional Metal Chelates of bis-furfural-semi-o-tolidine

Abstract

Some new PVC membrane electrodes based on Co(II), Mn(II), Ni(II), Cu(II), and Zn(II)chelates of bis-furfural-semi-o-tolidine as carriers are described. The electrodes exhibited different selectivity behaviour compared with the electrode using a classical anion exchanger such as tetraalkyl ammonium. The results showed that the Cobalt(II) chelate-based electrodes had a Nernstian response to iodide ion ranging from 1.0 × 10^?1 to 1.0 × 10^?6 mol.L^?1 in a phosphate buffer solution of pH 2.0 with a detection limit of 6.4 × 10^?7 mol.L^?1 and a slope of 57.8 mV/dec at 25deg;C. The response mechanism was also investigated by use of both a.c. impedance and SPQC techniques. The Co(II) chelate-based electrodes were used to determine the iodide content of a drug with satisfactory results.     

Potentiometric anion selectivity of polymer-membrane electrodes based on cobalt, chromium, and aluminum salens

Metallo-salens of cobalt(II) (Co-Sal), chromium(III) (Cr-Sal), and aluminum(III) (Al-Sal) are used as the active ionophores within plasticized poly(vinyl chloride) membranes. It is shown that central metal-ion plays a critical role in directing the ionophore selectivity. Polymer-membrane electrodes based on Co-Sal, Cr-Sal, and Al-Sal are demonstrated to exhibit enhanced responses and selectivity toward nitrite/thiocyanate, thiocyanate, and fluoride anions, respectively. The improved anion selectivity of the three ionophore systems is shown to deviate significantly from the classical Hofmeister pattern that is based only on ion lipophilicity. For example, optimized membrane electrodes for nitrite ion based on Co-Sal exhibit logK(Nitrite,Anion)(pot) values of -5.22, -4.66, -4.48, -2.5 towards bromide, perchlorate, nitrate, and iodide anions, respectively. Optimized membrane electrodes based on Co-Sal and Cr-Sal show near-Nernstian responses towards nitrite (-57.9+/-0.9 mV/decade) and thiocyanate (-56.9+/-0.8 mV/decade), respectively, with fast response and recovery times. In contrast, Al-Sal based membrane electrodes respond to fluoride ion in a super-Nernstian (-70+/-3 mV/decade) and nearly an irreversible mode. The operative response mechanism of Co-Sal, Cr-Sal, and Al-Sal membrane electrodes is examined using the effect of added ionic sites on the potentiometric response characteristics. It is demonstrated that addition of lipophilic anionic sites to membrane electrodes based on the utilized metallo-salens enhances the selectivity towards the primary ion, while addition of cationic sites resulted in Hofmeister selectivity patterns suggesting that the operative response mechanism is of the charged carrier type. Electron spin resonance (ESR) data indicates that Co(II) metal-ion center of Co-Sal ionophore undergoes oxidation to Co(III). This process leads to formation of a charged anion-carrier that is consistent with the response behavior obtained for Co-Sal based membrane electrodes.     

Bis-dimethylaminobenzaldehyde Schiff-base cobalt(II) complex as a neutral carrier for a highly selective iodide electrode.

A new solvent polymeric membrane electrode based on N,N'-bis-(dimethylaminobenzaldehyde)-glycine cobalt(II) [Co(II)-BDMABG] as a neutral carrier is described, which displays a preferential potentiometric response to iodide ion and an anti-Hofmeister selectivity sequence in the following order: I- > ClO4- > Sal- > SCN- > NO2- > Br- > NO3- > Cl- > SO3(2-) > SO4(2-). The electrode exhibits a near-Nernstian potential linear range of 9.0 x 10(-7)-1.0 x 10(-1) M with a detection limit of 6.8 x 10(-7) M and a slope of -53.0 mV/decade in pH 2.0 of a phosphate buffer solution at 20 degrees C. The response mechanism is discussed in view of the A.C. impedance technique and the UV spectroscopy technique. The electrode was successfully applied to the determination of iodide in Jialing River and Spring in Jinyun Mountains with satisfactory results.     

A highly selective iodide electrode based on the bis(benzoin)-semiethylenediamine complex of mercury(II) as a carrier

A new PVC membrane electrode based on the bis(benzoin)-semiethylenediamine (BBSEA) complex of Hg(II) is described which exhibits excellent selectivity towards iodide, related to the unique interaction between the central Hg(II) and the iodide ion. The electrode has a linear response to iodide from 5 × 10^–7 to 5 × 10^–4 mol/L with a slope of 58 mV/dec.(20°C). The response characteristics were investigated in detail and the mechanism of the electrode was studied with AC impedance and quartz crystal microbalance (QCM) techniques. It can be used for iodide determinations in drug preparations.     

Selective transport of Ag(Ⅰ) ion across a bulk liquid and polymer membranes incorporated with di-N-benzylated O_3N_2 donor macrocycles

<正>The selective bulk liquid membrane and polymer membrane transports of Ag(Ⅰ) from an aqueous solution containing seven metal cations,Co(Ⅱ),Ni(Ⅱ),Cu(Ⅱ),Zn(Ⅱ),Ag(Ⅰ),Cd(Ⅱ) and Pb(Ⅱ),was studied.The source phases contained equimolar concentrations of the above-mentioned cations,with the source and receiving phases being buffered at pH 5.0 and 3.0,respectively. Ag(Ⅰ) ion transport occurred with a good efficiency from the aqueous source phases across the bulk liquid membrane and polymer membrane(derived from cellulose triacetate) containing ligand 1 as the ionophores,into the aqueous receiving phases.Clear transport selectivity for Ag(Ⅰ) was observed using ligand 1.There was no selectivity for the cations using ligand 2 in the both bulk liquid membrane and polymer membrane transports.     

Emulsion liquid membrane extraction of Ni(II) and Co(II) from acidic chloride solutions using bis-(2-ethylhexyl) phosphoric acid as extractant

An emulsion liquid membrane process using bis-(2-ethylhexyl) phosphoric acid (D2EHPA) to extract and separate Ni(II) and Co(II) from acidic chloride solutions is described. Liquid membrane consists of a diluent, a surfactant (Span 80), and an extractant (D2EHPA). Hydrochloric acid was used as the stripping solution. The important parameters governing the permeation of nickel and their effect on the separation process have been studied. These parameters are stirring speed, feed phase pH, surfactant concentration, extractant concentration, stripping phase concentration, phase ratio, initial concentration of metal, and treatment ratio. The optimum conditions have been determined. The separation factors of Ni(II) with respect to Co(II), based on initial feed concentration, have been experimentally determined. Furthermore, the extraction selectivity for Co(II) over Ni(II) has been improved by using D2EHPA during the initial minutes.     

A highly selective iodide electrode based on the bis(benzoin)-semiethylenediamine complex of mercury(II) as a carrier

A new PVC membrane electrode based on the bis(benzoin)-semiethylenediamine (BBSEA) complex of Hg(II) is described which exhibits excellent selectivity towards iodide, related to the unique interaction between the central Hg(II) and the iodide ion. The electrode has a linear response to iodide from 5 × 10^–7 to 5 × 10^–4 mol/L with a slope of 58 mV/dec.(20°C). The response characteristics were investigated in detail and the mechanism of the electrode was studied with AC impedance and quartz crystal microbalance (QCM) techniques. It can be used for iodide determinations in drug preparations. Received: 29 January 1997 / Revised: 17 April 1997 / Accepted: 20 April 1997     

Thiocyanate-selective electrode based on cobalt(II) complexes of pyrazolone heterocyclic Schiff bases

A new solvent polymeric membrane electrode based on pyrazolone heterocyclic Schiff base complexes of Co(II) is described. It shows a preferential response towards thiocyanate over a range of 2.0 × 10^–6 to 1.0 × 10^–1 mol L^–1 with a slope of –60.2 ± 0.6 mV/dec. The selectivity sequence observed is thiocyanate > hydroxide > nitrite > iodide > perchlorate > citrate > bromide > fluoride > chloride > nitrate > acetate > borate > sulfate > phosphate. The selectivity behavior is discussed in view of axial coordination by uv/vis spectroscopy and the transfer process of thiocyanate across the membrane interface is investigated by the ac impedance technique. The electrode was successfully applied to the determination of thiocyanate in human urine as an indicator for distinguishing between smokers and non-smokers.     

Selective separation of copper with Lix 864 in a hollow fiber module

The transfer and separation of Cu(II), Co(II), Ni(II) and Zn(II) ions across a hollow fiber supported liquid membrane containing LIX 864 as the mobile carrier dissolved in kerosene solvent has been investigated. The flux and selectivity for copper has been studied as a function of the feed flow, the carrier concentration in the liquid membrane and the extraction solution acidity. A maximum copper recovery at 30% of LIX (v/v) in the diluent was obtained. The permeation experiments showed that at pH 2 in the extraction solution a highly selective separation of Cu over the other cations can be achieved. Increasing the acidity of the extraction solution copper selectivity decrease and the grade of recuperation sequence is Cu>Co>Ni>Zn. These results suggest that in selected situations, this membrane system can be competitive with the conventional liquid-liquid extraction process, in particular in leaching solutions with low metal concentration.     

A highly sensitive PVC membrane iodide electrode based on complexes of mercury(II) as neutral carrier

A novel solvent polymeric membrane electrode based on bis(1,3,4-thiadiazole) complexes of Hg(II) is described which has excellent selectivity and sensitivity toward iodide ion. The electrode, containing 1,4-bis(5-methyl-1,3,4-thiadiazole-2-yl-thio)butanemercury(II) [Hg(II)BMTB(NO₃)₄], has a Nernstian potentiometric response from 2.0×10^–8 to 2.0×10^–2 mol L^–1 with a detection limit of 8.0×10^–9 mol L^–1 and a slope of –59.0±0.5 mV/decade in 0.01 mol L^–1 phosphate buffer solution (pH 3.0, 20°C). The selectivity sequence observed is iodide>bromide>thiocyanate>nitrite>nitrate>chloride>perchlorate>acetate>sulfate. The selectivity behavior is discussed in terms of the UV–Vis spectrum, and the process of transfer of iodide across the membrane interface is investigated by use of the AC impedance technique. The electrode was successfully applied to the determination of iodide in Jialing River and Spring in Jinyun Mountains, with satisfactory results.     

Rational ligand design for metal ion recognition. Synthesis of a N-benzylated N2S3-donor macrocycle for enhanced silver(I) discrimination

Four previously documented ligand design strategies for achieving Ag(I) discrimination have been applied to the design of a new N-benzylated N2S3-donor macrocycle; the latter shows high selectivity for Ag(I) over Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) in log K and bulk membrane transport studies.     

Mercury(II) ion-selective electrodes based on p-tert-butyl calix[4]crowns with imine units.

A PVC membrane incorporating p-tert-butyl calix[4]crown with imine units as an ionophore was prepared and used in an ion-selective electrode for the determination of mercury(II) ions. An electrode based on this ionophore showed a good potentiometric response for mercury(II) ions over a wide concentration range of 5.0 x 10(-5) - 1.0 x 10(-1) M with a near-Nernstian slope of 27.3 mV per decade. The detection limit of the electrode was 2.24 x 10(-5) M and the electrode worked well in the pH range of 1.3 - 4.0. The electrode showed a short response time of less than 20 s. The electrode also showed better selectivity for mercury(II) ions over many of the alkali (Na+, -1.69; K+, -1.54), alkaline-earth (Ca2+, -3.30; Ba2+, -3.32), and heavy metal ions (Co2+, -3.67; Ni2+, -3.43; Pb2+, -3.31; Fe3+, -1.82). Ag+ ion was found to be the strongest interfering ion. Also, sharp end points were obtained when the sensor was used as an indicator electrode for the potentiometric titration of mercury(II) ions with iodide and dichromate ions.     

Novel Nitrite Membrane Sensor Based on Cobalt(II) Salophen for Selective Monitoring of Nitrite Ions in Biological Samples

A novel PVC-based membrane sensor based on the Co(II)-salophen complex (CSC) is described. The electrode revealed a Nernstian response over a wide nitrite ion concentration range (1.0×10^–6–1.0×10^–1M). The detection limit of the sensor is 8.0×10^–7M. The best performance was obtained with a membrane composition of 33% PVC, 61% ortho-nitrophenyloctyl ether, 3% cobalt(II)-salophen, and 3% hexadecyltrimethylammonium bromide. The potentiometric response of the sensor is independent of the pH of solution in the pH range 4.5–11.9. The electrode exhibits a very fast response time and good selectivity over a variety of common inorganic and organic anions, including fluoride, bromide, iodide, sulfite, nitrate, thiocyanate, thriiodide and perchlorate. The selectivity behavior of the proposed sensor shows substantial improvements compared to the previously reported electrodes for nitrite ion. The membrane sensor can be used for at least 2 months without any divergence in potential. The electrode was successfully applied to the monitoring of nitrite ion in water, sausage, flour, wheat, cheese and milk.     

Thiocyanate-selective electrode based on cobalt(II) complexes of pyrazolone heterocyclic Schiff bases

A new solvent polymeric membrane electrode based on pyrazolone heterocyclic Schiff base complexes of Co(II) is described. It shows a preferential response towards thiocyanate over a range of 2.0 × 10^–6 to 1.0 × 10^–1 mol L^–1 with a slope of –60.2 ± 0.6 mV/dec. The selectivity sequence observed is thiocyanate > hydroxide > nitrite > iodide > perchlorate > citrate > bromide > fluoride > chloride > nitrate > acetate > borate > sulfate > phosphate. The selectivity behavior is discussed in view of axial coordination by uv/vis spectroscopy and the transfer process of thiocyanate across the membrane interface is investigated by the ac impedance technique. The electrode was successfully applied to the determination of thiocyanate in human urine as an indicator for distinguishing between smokers and non-smokers. Received: 30 September 1997 / Revised: 9 December 1997 / Accepted: 13 December 1997     

Potentiometric Iodide Selectivity of Polymer‐Membrane Sensors Based on Co(II) Triazole Derivative

The 3‐amion‐5‐mercapto‐1,2,4‐triazole cobalt(II) [Co(II)AMETR] was used as a new carrier for preparing polymeric membrane selective sensor which exhibited high affinity for iodide ion. The effects of membrane composition, pH, the influence of lipophilic ion additives and plasticizer on the response characteristics of the sensor were investigated. The sensor showed a near Nernstian slope of ?56.6 mV/decade for I^? ion over a wide concentration range from 8.5×10^?7 to 1.0×10^?1 M with a low detection limit of 5.1×10^?7 M. The sensor has a fast response time and could be used over a wide pH range of 2–8. The response mechanism is discussed in view of the AC impedance technique. The sensor was successfully applied to direct determination of iodide content in environmental water samples and mouth wash samples.     

Synthesis of a new oxime and its application to the construction of a highly selective and sensitive Co(II) PVC-based membrane sensor.

A cobalt(II) ion-selective membrane sensor has been fabricated from a poly vinyl chloride (PVC) matrix membrane containing a new oxime compound (oxime of 1-(2-oxocyclohexyl)-1,2-cyclohexanediol, OXCCD) as a neutral carrier, sodium tetraphenyl borate (NaTPB) as an anionic excluder and o-nitrophenyloctylether (o-NPOE) as a plasticizing solvent mediator. The membrane sensor exhibits a linear potential response in the concentration range of 1.0 x 10(-1) - 1.0 x 10(-6) M of Co2+. The electrode displays a Nernstian slope of 29.8 mV decade(-1) in the pH range of 3.5 - 8.0. The sensor also exhibits a fast response time of < 25 s. The detection limit of the proposed sensor is 9.0 x 10(-7) M (approximately 40 ng/ml), and it can be used over a period of two months. The selectivity of the sensor with respect to other cations (alkali, alkaline earth, transition and heavy metal ions) is excellent. The practical utility of the sensor has been demonstrated by using it as an indicator electrode in the potentiometric titration of Co2+ with EDTA and for the direct determination of Co(II) in wastewater of the electroplating industry.     

Regio- and diastereocontrol in carbonyl allylation by 1-halobut-2-enes with Tin(II) halides

Regio- and diastereoselective carbonyl allylations of 1-halobut-2-enes with tin(II) halides are described. Tin(II) bromide in a dichloromethane-water biphasic system is an effective reagent for unusual alpha-regioselective carbonyl allylation of 1-bromobut-2-ene to produce 1-substituted pent-3-en-1-ols. The addition of tetrabutylammonium bromide (TBABr) to the biphasic system produces 1-substituted 2-methylbut-3-en-1-ols via usual gamma-addition which is opposite to the alpha-addition without TBABr. The gamma-addition to aromatic aldehydes exhibits anti-diastereoselectivity, while that to aliphatic aldehydes is not diastereoselective. The allylation of benzaldehyde by 1-chlorobut-2-ene in 1,3-dimethylimidazolidin-2-one (DMI) does not occur with tin(II) chloride or bromide but does proceed with tin(II) iodide and exhibits gamma-syn selectivity which is unusual for a Barbier-type carbonyl allylation. In the carbonyl allylation by 1-chlorobut-2-ene with any tin(II) halide, the addition of tetrabutylammonium iodide (TBAI) accelerates the reaction and enhances gamma-syn selectivity. The use of tin(II) iodide and TBAI produces 2-methyl-1-phenylbut-3-en-1-ol with high yield and high syn-diastereoselectivity. The syn-diastereoselective carbonyl allylation of 1-chlorobut-2-ene using tin(II) iodide, a catalytic amount of TBAI, and NaI in DMI-H(2)O is applied to various aldehydes.     

Platinum porphyrins as ionophores in polymeric membrane electrodes

A comparative study of Pt(II)- and Pt(IV)-porphyrins as novel ionophores for anion-selective polymeric membrane electrodes is performed. Polymeric membranes of different compositions, prepared by varying plasticizers, cationic and anionic additives and Pt porphyrins, have been examined by potentiometric and optical techniques. Pt porphyrin-based devices were found to exhibit enhanced potentiometric selectivity toward iodide ion compared to electrodes based on a typical anion-exchanger (e.g. tridodecylmethylammonium chloride). It is shown that Pt(II)-porphyrins function as neutral anion carriers within the electrode membranes, while those based on Pt(IV)TPPCl(2) operate via a mixed mode carrier mechanism, evidencing also a partial reduction of the starting ionophore to Pt(II)TPP. Spectrophotometric measurements of thin polymeric films indicate that no spontaneous formation of hydroxide ion bridged porphyrin dimers occurs in the membrane plasticized both with high or low dielectric constant plasticizer, due to a low oxophilicity of central Pt. The computational study of various anion-Pt(IV)TPPCl(2) complex formation by means of semi-empirical and density functional theory (DFT) methods revealed a good correlation between calculated and measured ionophore selectivity.     

Comparative Study of Carbon Paste,Screen Printed,and PVC Potentiometric Sensors Based on Copper‐sulphamethazine Schiff Base Complex for Determination of Iodide – Experimental and Theoretical Approaches

New poly vinyl chloride (PVC) membrane, carbon paste (CP), and screen printed (SP) electrodes are constructed for iodide sensing. They are based on copper (II)‐sulphamethazine Schiff base complex as suitable carrier. Mechanism was proved by FT‐IR and UV‐Vis spectroscopy. Computational study involving binding energies calculations at DFT/B3LYP level of theory confirmed the proposed mechanism and agreed the observed selectivity pattern. Responses are near‐Nernstian (?55.0, ?51.0 mV/concentration decade) for PVC, and SP electrodes, and super‐Nernstian (?61.2 mV/concentration decade) for the CP electrode. Lower limit of detection (3.2×10^?6 mol L^?1) and improved selectivity over the highly interfering thiocyanate were obtained in comparison with the previously reported Schiff base complexes‐based iodide sensors.