Preconcentration and determination of trace metals in seawater using a thiol cotton fiber minicolumn coupled with inductively coupled plasma mass spectrometry.

A rapid separation and preconcentration method was developed for the determination of trace metals Cu, Zn, Cd, and Pb in seawater using a minicolumn packed with thiol cotton fiber (TCF) coupled with inductively coupled plasma mass spectrometry (ICP-MS). Preconcentration parameters, such as seawater sample volume and flow rate and eluent hydrochloric acid concentration, volume and flow rate, were optimized. Under the optimized conditions, trace metals Cu, Zn, Cd, and Pb in seawater can be determined with no interference from saline matrices. When a sample volume of 1500 ml and a sample flow rate of 15 ml min(-1) were used, the preconcentration factor of 1500 and RSD value of <7% at ng ml(-1) were achieved. The accuracy of the recommended method was verified by the analysis of certified reference materials.     

Determination of Molybdenum and Vanadium in Seawater by Ion-Exchange Preconcentration-Inductively Coupled Plasma Atomic Emission Spectrometry

A simple and rapid method has been developed for the determination of molybdenum and vanadium in seawater using ion-exchange preconcentration and inductively coupled plasma atomic emission spectrometry (ICP-AES). One hundred milliliters of seawater prepared as 0.05 M hydrochloric acid solution is passed through a cellulose phosphate column, and molybdenum and vanadium adsorbed on the cellulose are eluted simultaneously with dilute ammonia solution. The effluent collected is evaporated to a small volume, in which molybdenum and vanadium can be determined by ICP-AES. The overall recoveries of molybdenum and vanadium are 93.6 and 80.4%, respectively, at the level of 1 μgMo/100 ml and 0.1 μgV/100 ml. The proposed method has been successfully applied to the determination of the two elements in several seawater samples. Relative standard deviations (n = 3) are 2.0-2.9 and 0.3-4.3% for molybdenum and vanadium, respectively.     

Flow injection on-line solid phase extraction coupled with inductively coupled plasma mass spectrometry for determination of (Ultra)trace rare earth elements in environmental materials using maleic acid grafted polytetrafluoroethylene fibers as sorbent

A new sorbent, maleic acid grafted polytetrafluoroethylene fiber (MA-PTFE), was prepared and evaluated for on-line solid-phase extraction coupled with inductively coupled plasma mass spectrometry (ICP-MS) for fast, selective, and sensitive determination of (ultra)trace rare earth elements (REEs) in environmental samples. The REEs in aqueous samples at pH = 3.0 were selectively extracted onto a microcolumn packed with the MA-PTFE fiber, and the adsorbed REEs were subsequently eluted on-line with 0.9 mol l(-1) HNO3 for ICP-MS determination. The new sorbent extraction system allows effective preconcentration and separation of the REEs from the major matrix constituents of alkali and alkali earth elements, particularly their separation from barium that produces considerable isobaric interferences of 134Ba16O1H+, 135Ba16O+, 136Ba16O1H+, and 137Ba16O+ on 151Eu+ and 153Eu+. With the use of a sample loading flow rate of 7.4 ml min(-1) for 120 s preconcentration, enhancement factors of 69-97 and detection limits (3s) of 1-20 pg l(-1) were achieved at a sample throughput of 22 samples h(-1). The precision (RSD) for 16 replicate determinations of 50 ng l(-1) of REEs was 0.5-1.1%. The developed method was successfully applied to the determination of (ultra)trace REEs in sediment, soil, and seawater samples.     

Catalytic polarographic determination of total selenium in tea leaves

The catalytic polarographic determination of selenium(IV) by use of the SeSO(2-)(3) -KIO(3) system is sensitive, accurate, rapid and requires only small quantities of sample. The detection limit for selenium(IV) is 0.04 ng/ml in the final solution. The working range of the calibration is 0.04-2.5 ng/ml. Se(VI) present can be reduced with hot hydrochloric acid to Se(IV), allowing determination of the total selenium.     

Catalytic spectrophotometric determination of vanadium in seawaters based on the bromate oxidative coupling reaction of metol and 2,3,4-trihydroxybenzoic acid.

A new, simple, sensitive and selective catalytic method is developed for the determination of vanadium in natural and sea waters. The method is based on the catalytic effect of V(V) and/or V(IV) on the bromate oxidative-coupling reaction of metol with 2,3,4-trihydroxybenzoic acid (THBA). The reaction is followed spectrophotometrically by tracing the oxidation product at 380 and/or 570 nm after 5 min of mixing the reagents. The optimum reaction conditions are 6.4 x 10(-3) mol l-1 of metol, 2.0 x 10(-3) mol l-1 of THBA and 0.16 mol l-1 of bromate at 35 degrees C and in the presence of an activator-buffer solution of 1 x 10(-2) mol l-1 of tartrate (pH = 3.10). Following the recommended procedure, V(V) and/or V(IV) can be determined with linear calibration graphs up to 0.75 ng ml-1 and detection limits, based on the 3Sb criterion, of 0.008 and 0.018 ng ml-1 at 380 and 570 nm, respectively. The developed method was successfully applied, without any separation or preconcentration processes, to the determination of vanadium in natural and seawaters following the direct calibration and standard addition techniques, respectively.     

Cloud point extraction of vanadium in parenteral solutions using a nonionic surfactant (PONPE 5.0) and determination by flow injection-inductively coupled plasma optical emission spectrometry

A preconcentration and determination methodology for vanadium at trace levels in parenteral solutions was developed. Cloud point extraction was successfully employed for the preconcentration of vanadium prior to inductively coupled plasma atomic optical emission spectrometry (ICP-OES) coupled to a flow injection (FI) system. The vanadium was extracted as vanadium-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol [V-(5-Br-PADAP)] complex, at pH 3.7 mediated by micelles of the nonionic surfactant polyoxyethylene (5.0) nonylphenol (PONPE 5.0). The extracted surfactant-rich phase (100 mul) was mixed with 100 mul of ethanol and this final volume injected into ICP-OES for the vanadium determination. Under these conditions, the 50 ml sample solution preconcentration allowed raising an enrichment factor of 250-fold; however, it was possible to obtain a theoretical enrichment factor of 500-fold. The lower limit of detection (LOD) obtained under the optimal conditions was 16 ng l(-1). The precision for 10 replicate determinations at the 2.0 mug l(-1) V level was 2.3% relative standard deviation (RSD), calculated with the peak heights. The calibration graph using the preconcentration system for vanadium was linear with a correlation coefficient of 0.9996 at levels near the detection limits up to at least 50 mug l(-1). The method was successfully applied to the determination of vanadium in parenteral solution samples.     

Field preconcentration of cadmium from seawater by using a minicolumn packed with Amberlite XAD-4/4-(2-pyridylazo) resorcinol and its flow-injection-flame atomic absorption spectrometric determination at the ng L(-1) Level

A flow injection analysis-flame atomic absorption spectrometric method for the determination of cadmium in seawater was developed with the aim of yielding a sensitive assay with a low detection limit. The method employs a field flow preconcentration technique involving a minicolumn containing Amberlite XAD-4 impregnated with the complexing agent 4-(2-pyridylazo) resorcinol. A Plackett-Burman 2(7)x3/32 design for seven factors (sample pH, sample flow rate, eluent volume, eluent concentration, eluent flow rate, ethanol percentage in the eluent and minicolumn diameter) was carried out in order to find the significant variables affecting the field continuous preconcentration system (FCPS) and the flow injection elution manifold for cadmium determination in seawater samples by flame atomic absorption spectrometry. Cadmium can be preconcentrated with an enrichment factor of 1053 for a sample volume of 200 mL and a preconcentration time of 57 min. In these experimental conditions, the method provides a linear relationship between absorbance and cadmium concentration in the range from 22-1900 ng L(-1), with a detection limit (3SD) of 6 ng L(-1). The precision (expressed as relative standard deviation) for eleven independent determinations reached values of 8.9-0.8% in cadmium solutions of 50-700 ng L(-1). Analysis of certified reference materials (SLEW-3 and NASS-5) showed good agreement with the certified value. This procedure was applied to the determination of cadmium in seawater from Galicia (Spain).     

Quantitative determination of nicotinic acid in micro liter volume of urine sample by drop-to-drop solvent microextraction coupled to matrix assisted laser desorption/ionization mass spectrometry

Drop-to-drop solvent microextraction (DDSME) coupled with matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS) for quantitative determination of nicotinic acid in one drop of urine sample has been proposed. All parameters, such as type of organic solvent, extraction time, exposure volume solvent, pH of the sample solution that affecting the separation and preconcentration of nicotinic acid were investigated. Under the optimal conditions, the detection limit of the method was 20 ng mL(-1) and the relative standard deviations (RSD) for determination of the nicotinic acid were in the range of 8.0-12.5%. The calculated calibration curves gave linearity in the range of 80-1000 ng mL(-1). The main advantages of the proposed method are simple, fast, and small amount of sample solution is used for separation and preconcentration of nicotinic acid. This method could be also useful for the analysis of other interested analytes in small volume of biological samples, like plasma, saliva and urine, where the availability of samples are limited.     

Determination of trace levels of dissolved vanadium in seawater by use of synthetic complexing agents and inductively coupled plasma-atomic emission spectroscopy (ICP-AES)

In the determination of traces of dissolved vanadium in complex matrices such as seawater, separation and enrichment from the matrix is of special importance. A wide variety of methods has been proposed for preconcentration, depending to the nature of samples and the methods to be used for measurement. Among these methods separation techniques based on sorption on to chelating resins seem convenient, rapid, and capable of achieving a high concentration factor. The methods proposed in this paper are based on the transformation of all dissolved vanadium species in seawater into organic complexes by use of synthetic complexing agents such as dithizone, luminol, or 8-hydroxyquinoline; the resulting vanadium-organic complexes were sorbed on to a C(18) column at a flow rate of 5 mL min(-1). The vanadium sorbed on the C(18) columns was then stripped by use of nitric acid (2 mol L(-1)) and analysed by inductively coupled plasma-atomic emission spectroscopy, ICP-AES. This method was optimised and use of other chelating resins, such as chelamine, chelex-100, and immobilised 8-hydroxyquinoline and was compared by passing seawater samples directly over the resins. The experimental conditions (pH, acid used for elution, and contact time between the liquid sample and the resin) were optimised. The results were compared for all the resins used and were indicative of excellent and coherent reproducibility.     

Speciation and preconcentration of vanadium(V) and vanadium(IV) in water samples by flow injection-inductively coupled plasma optical emission spectrometry and ultrasonic nebulization

An on-line separation, preconcentration and determination system for vanadium(IV) and vanadium(V) comprising inductively coupled plasma optical emission spectrometry (ICP-OES) coupled to a flow injection (FI) method with an ultrasonic nebulization (USN) system was studied. The vanadium species were retained on an Amberlite XAD-7 resin as a vanadium-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (V-5-Br-PADAP) complex at pH 3.7. Enhanced selectivity was obtained with the combined use of the formation on-line of the complexes and 1,2-cyclohexanediaminetetraacetic acid (CDTA) as masking agent. The vanadium complexes were removed from the microcolumn with 25% v/v nitric acid. A sensitivity enhancement factor of 225 was obtained with respect to ICP-OES using pneumatic nebulization (15-fold for USN and 15-fold for the microcolumn). The detection limit for the preconcentration of 10 mL of aqueous solution was 19 ng L-1. The precision for 10 replicate determinations at the 5 micrograms L-1 V level was 2.3% relative standard deviation (RSD), calculated from the peak heights obtained. The calibration graph using the separation and preconcentration system for vanadium species was linear with a correlation coefficient of 0.9992 at levels from near the detection limits up to at least 100 micrograms L-1. The method was successfully applied to the speciation of vanadium in river water samples.     

Kinetic-spectrophotometric determination of trace amounts of vanadium

A simple and sensitive kinetic-spectrophotometric method is described for the determination of vanadium and the possible mechanism of catalytic reaction is proposed. The method is based on the vanadium(V)-catalyzed oxidation of 1,8-diaminonaphthalene (DNA) by potassium bromate (Tiron as activator) at pH 3.8 and 40 degrees C. The reaction was monitored spectrophotometrically by measuring the increase in absorbance of oxidation products at 505 nm after a fixed time (6 min). The proposed method allowed the determination of vanadium in the range 0.025-15 ng ml(-1) with good precision and accuracy and the detection limit was down to 0.01 ng ml(-1). The method was found to be relatively selective and was applied successfully to the determination of vanadium in food and hair samples without previous separations. Recovery experiments have also been performed; excellent results were obtained.     

Ion chromatographic preconcentration of Cu and Cd from ultra-high-purity water and determination by electrothermal atomic absorption spectrometry

A method based on preconcentration of Cu and Cd from ultra-high-purity water by ion chromatography (IC) and determination by electrothermal atomic absorption spectrometry is described. A small low-capacity ion-exchange concentrator Dionex HPIC-CG5 and mobile phase of 3 mM pyridine-2,6-dicarboxylic acid (PDCA) are used. Water samples are loaded onto the preconcentration column at a flow-rate ranging from 1 to 3.5 ml min(-1). Large sample volumes (up to 200 ml) can be loaded onto the concentrator without losing metal ions. Elution is carried out in the reverse direction of sample loading and the volumes of effluent are as small as 0.150 and 0.200 ml for copper and cadmium, respectively. Under these conditions the preconcentrated ions coelute. The detection limits, based on the Hubaux-Vos method, for Cu using a 1300-fold preconcentration in the IC step was found to be 1 pg ml(-1), and was limited due to impurity in PDCA, while the detection limit found for Cd using a 1000-fold preconcentration was 0.02 pg ml(-1). Ultra-high-purity water produced by a Millipore system is successfully analysed by the proposed method and the content of Cu and Cd are found to lie in the range 1-10 pg ml(-1).     

Determination of cadmium in water by ICP-AES with on-line adsorption preconcentration using DPTH-gel and TS-gel microcolumns

Two flow injection inductively coupled plasma atomic emission spectrometric methods for the preconcentration and determination of trace amounts of cadmium in sea-water and waste-water samples are described based on the adsorption of the metal ion on a micro-column placed in the injection valve of the FI manifold and packed with silica gel funtionalised with 1,5-bis(di-2-pyridyl) methylene thiocarbohydrazide (DPTH-gel) and silica gel functionalised with methylthiosalicylate (TS-gel), respectively. Various parameters and chemical variables affecting the preconcentration and determination of this metal by ICP-AES are evaluated. The DPTH-gel preconcentration method has a linear calibration range from 5 to at least 100 ng ml(-1) of cadmium, with a R.S.D. of 1.1% for ten independent analyses of 100 ng ml(-1), a detection limit of 1.1 ng ml(-1) and a throughput of 40 samples per hour using a 60 s preconcentration time. The TS-gel preconcentration method shows a linear range between 10 and 100 ng ml(-1), with a R.S.D. of 2.5% for ten independent analyses of 100 ng ml(-1), a detection limit of 4.3 ng ml(-1) and a sample throughput of 24 samples per hour for a preconcentration time of 120 s. Validation was carried out against a certified reference water sample and by determining the analyte content in spiked synthetic sea-water, sea-water and waste-water.     

Lead ultra-trace on-line preconcentration and determination using selective solid phase extraction and electrothermal atomic absorption spectrometry: applications in seawaters and biological samples

In this work, a new chelating resin [1,5-bis (2-pyridyl)-3-sulphophenyl methylene] thiocarbonohydrazide immobilised on aminopropyl-controlled pore glass (550 A; PSTH-cpg) was synthesised and packed in a microcolumn which replaced the sample tip of the autosampler arm. The system was applied to the preconcentration of lead. When microliters of 10% HNO3, which acts as elution agent, pass through the microcolumn, the preconcentrated Pb(II) is eluted and directly deposited in a tungsten-rhodium coated graphite tube. With the use of the separation and preconcentration step and the permanent modifiers, the analytical characteristics of the technique were improved. The proposed method has a linear calibration range from 0.012 to 10 ng ml(-1) of lead. At a sample frequency of 36 h(-1) with a 90 s preconcentration time, the enrichment factor was 20.5, the detection and determination limits were 0.012 and 0.14 ng ml(-1), respectively and the precision, expressed as relative standard deviation, was 3.2% (at 1 ng ml(-1)). Results from the determination of Pb in biological certified reference materials were in agreement with the certified values. Seawaters and other biological samples were analysed too.     

Flow injection determination of trace vanadium with catalytic photometric detection

A catalytic photometric detection system based on the chromotropic acid—bromate reaction is adapted to a flow injection system for the rapid, simple and sensitive determination of vanadium. Vanadium in the range 0.3–4.8 ng (10–160 ppb) can be determined at a rate of ca. 60 samples per hour.     

Determination of lead in seawater by flow-injection on-line preconcentration-electrothermal atomic absorption spectrometry after coprecipitation with iron(III) hydroxide.

A flow-injection on-line preconcentration-electrothermal atomic absorption spectrometric (ETAAS) method coupled with a coprecipitation method has been developed for the determination of lead in seawater. The combination of two preconcentration procedures, coprecipitation with iron(II) hydroxide and solid-phase extraction with a lead-selective resin, Pb-Spec, allowed the determination of lead at the ng kg(-1) level. Lead in 250 g of a sample solution was collected by coprecipitation with 10 mg of iron. The precipitate was dissolved in 25 ml of 1 mol l(-1) nitric acid; then, a 4-ml aliquot of the sample solution was introduced into the flow-injection system to preconcentrate and separate lead from iron on a Pb.Spec microcolumn. The sorbed lead was eluted with a 1.0 x 10(-4) mol l(-1) EDTA solution. The 30-microl portion of the eluate corresponding to the highest analyte concentration zone was injected into a graphite furnace. The overall enhancement factor was about 200 for 250 g of the sample. The average and standard deviation of ten blank values obtained were 1.7 ng and 0.38 ng, respectively. The recovery was 93.7 +/- 5.0% for seawater spiked with 20 ng kg(-1) lead. The proposed method is applicable to the analysis of seawater for lead at slightly higher levels.     

Determination of V(IV) and V(V) by electrothermal atomic absorption spectrometry following selective solid-phase extraction and the study on the change in the oxidation state of vanadium species in seawater during the sample storage.

The changes in the oxidation state of vanadium in artificial and natural seawater samples were studied by electrothermal atomic absorption spectrometry (ETAAS) with a direct injection of a resin suspension. V(IV) and V(V) were extracted as the complex with Chromazurol B and with N-cinnamoyl-N-2,3-xylylhydroxylamine, respectively, using a suspension of an anion-exchange resin and determined by ETAAS independently. The detection limits of both methods were 0.02 ng ml(-1) for 40 ml of a sample solution. The recovery tests for an artificial seawater sample spiked with V(IV) and/or V(V) were carried out carefully. The results showed that the recoveries of V(IV) or V(V) were 99.2-109% and the standard deviations were 1-6%. The total V was also determined after V(V) was reduced by ascorbic acid. In artificial seawater at pH 7.8, V(V) was stable but V(IV) was oxidized rapidly. In acidified artificial seawater (pH 2.0), V(IV) was oxidized slowly but only a small tendency of such reduction of V(V) was observed. In a natural seawater sample, V(IV) was not detected. The acidification of the natural seawater sample resulted in the reduction of V(V).     

Application of factorial designs and Doehlert matrix in optimization of experimental variables associated with the preconcentration and determination of vanadium and copper in seawater by inductively coupled plasma optical emission spectrometry

In the present paper a procedure for preconcentration and determination of vanadium and copper in seawater using inductively coupled plasma optical emission spectrometry (ICP OES) is proposed, which is based on solid-phase extraction of vanadium (IV), vanadium (V) and copper (II) ions as 1-(2-pyridylazo)-2-naphthol (PAN) complexes by active carbon. The optimization process was carried out using two-level full factorials and Doehlert matrix designs. Four variables (PAN mass, pH, active carbon mass and shaking time) were regarded as factors in the optimization. Results of the two-level full factorial design 2⁴ with 16 runs for vanadium extraction, based on the variance analysis (ANOVA), demonstrated that the factors pH and active carbon mass, besides the interaction (pH×active carbon mass), are statistically significant. For copper, the ANOVA revealed that the factors PAN mass, pH and active carbon mass and the interactions (PAN mass×pH) and (pH×active carbon mass) are statistically significant. Doehlert designs were applied in order to determine the optimum conditions for extraction. The procedure proposed allowed the determination of vanadium and copper with detection limits (3σ/S) of 73 and 94 ng l⁻¹, respectively. The precision, calculated as relative standard deviation (R.S.D.), was 1.22 and 1.37% for 12.50 μg l⁻¹ of vanadium and copper, respectively. The preconcentration factor was 80. The recovery achieved for determination of vanadium and copper in the presence of several cations demonstrated that this procedure improved the selectivity required for seawater analysis. The procedure was applied to the determination of vanadium and copper in seawater samples collected in Salvador City, Brazil. Results showed good agreement with other data reported in the literature.     

Continuous flow system for the determination of trace boron in iron and steel utilizing in-line preconcentration/separation by Sephadex column coupled with fluorimetric detection

A simple, rapid and sensitive system for the determination of trace boron in iron and steels is presented, in which in-line separation/preconcentration of boron from iron matrix is directly coupled with fluorimetric detection in a continuous flow system. Boron was adsorbed on a small column packed with Sephadex G-25 gel, followed by elution with a small volume of dilute hydrochloric acid. The formation of boron complex with 1,8-dihydroxy-3,6-naphthalenedisulphonic acid in a continuous flow system was used for the sensitive determination of boron by fluorescence detection(lambda(ex)=314 nm and lambda(em)=355 nm). The present FIA system offers many advantages over existing methods, especially with respect to simplicity and sensitivity, permitting semi-automated determination of boron with a short analysis time (about 10 min), low limit of determination (0.1 ppm in steels) and good reproducibility (rsd<3% for 1-18 mug g(-1) boron in steels).The present FIA system can be readily applied to the steel samples.     

A simple and sensitive flow-injection on-line preconcentration coupled with hydride generation atomic fluorescence spectrometry for the determination of ultra-trace lead in water, wine, and rice.

A simple and sensitive flow-injection on-line separation and preconcentration system coupled to hydride generation atomic fluorescence spectrometry (HG-AFS) was developed for ultra-trace lead determination in water, wine, and rice samples, with the salient advantages of its minimization of transition-metal interferences and tolerance to an ethanol matrix. A lead hydroxide precipitate was achieved by the on-line merging of a sample and an ammonium buffer solution and collected onto the inner walls of a knotted reactor (KR). Removal of the residual solution from KR was achieved by air flow, and dissolution of the precipitate was carried out by using 0.2 mol l(-1) HCl. With a sample consumption of 11.7 ml, an enhancement factor of 16 was obtained at a sample throughput of 30 h(-1). The limit of detection (3s) was 16 ng l(-1) and the precision (RSD) for 1.0 microg l(-1) Pb was 3.4%.