Amperometric detection of uric acid and hypoxanthine with Xanthine oxidase immobilized and carbon based screen-printed electrode. Application for fish freshness determination

Carbon-based screen-printed electrodes are suitable for uric acid detection. Xanthine oxidase (XO) was immobilized either directly on the surface of the electrode or in a reactor with CPG aminopropylsilane in a FIA assembly. Higher reproducibility and lifetime was obtained with the reactor. Optimum conditions were found for the determination of Hypoxanthine (Hx), Inosine (HxR) and Inosine monophosphate (IMP). Calibration curves for IMP, HxR and Hx are linear up to 50 muM with detection limit of 1 muM for 50 mul injection. One assay is completed within 30 s. The reproducibility of 20 muM of Hx was obtained with CV 2%.     

Rapid measurement of fish freshness indices by an amperometric flow-injection system with a 16-way switching valve and immobilized enzyme reactors

A novel flow-injection system is proposed for the rapid measurement of the fish freshness indices K₁ and K₂: K₁=[([HxR+[Hx])×100/([IMP]+[HxR]+[Hx])] and K₂=[[Hx]×100/([HxR]+[Hx])], where [IMP], [HxR] and [Hx] are inosine-5′-monophosphate, inosine and hypoxanthine concentrations, respectively. For the estimation of index K₁, 5′-nucleotidase immobilized reactor and nucleoside phosphorylase (NP)/xanthine oxidase (XO) coimmobilized reactor were incorporated in series in the flow-injection line made up by a 16-way switching valve with two sample loops. For the estimation of index K₂, NP and XO immobilized reactors were also incorporated in the similar flow-line. Two sample portions passed through the flow-line with different residence times so that two peaks were obtained. The first and second peaks obtained in the K₁-determining system corresponded to the total of HxR and Hx and the total of Hx, HxR and IMP, respectively. Similarly, the first and second peaks obtained in the K₂-determining system corresponded to Hx and the total of Hx and HxR, respectively. Therefore, the indices K₁ and K₂ can be estimated by

where i₁ and i₂ present the peak current of the first and second peaks, respectively, and f the ratio of the peak currents of the first and second peaks for a Hx standard solution. A sea bream was selected as a model fish and it was stored at 4 °C after death. A good correlation was found between the index K₁ and the storage time over a period of 400 h, with a correlation coefficient of 0.992, but no correlation between the index K₂ and the storage time. The measurements could be performed at a rate of 22 samples per hour with satisfactory precision (0.6–1.2% R.S.D.), without calibration for each species, accurate weighing of fish meat and any interferences in fish meat.     

Development of A Dual Channel Chemiluminescence FIA System for Rapid Measurement of Fish Freshness

Abstract

A dual channel chemiluminescence FIA system for the rapid measurement of the fish freshness index KI $$ where [IMP], [HxR] and [Hx] are, respectively, the inosine 5′-monophosphate, inosine and hypoxanthine contents of fish meat was developed. The system consisted of a pair of chemiluminescence FIAs (CL-FIA); one for the measurement of [IMP] + [HxR] + [Hx], and the other for [HxR] + [Hx]. IMP, HxR or Hx were measured using a reactor comprising immobilized alkaline phosphatase, purine nucleoside phosphorylase (PNP) and xanthine oxidase (XOD). The calibration curves for IMP, HxR or Hx were linear from 0.06 μM to 100 μM for a sample volume of 20 μl. The time for a single KI measurement was less than 1 min. This fish freshness FIA system is rapid, convenient and applicable for fish freshness measurements in real fish samples.     

A sensitive xanthine oxidase electrode with silk net for estimating fish freshness

An enzyme biosensor was constructed using a plate platinum electrode and immobilized xanthine oxidase (XOD).Only a very small quantity of enzyme was chemically immobilized on a special silk net.Hydrogen peroxide released during the enzymatic reaction was detected by the electrode at+0.65 V (vs.Ag/AgCl).The electrode was very sensitive to hypoxanthine and its detection limit was 1×10-7 mol/L.When it was applied to the determination of fish freshness,the results agreed well with those obtained by traditional methods-determination of total volatile basic nitrogen (TVB-N) and microbial count.A range for estimating the freshness of river fish was suggested.     

Enzyme sensors for determination of fish freshness

A simple and rapid procedure for the determination of fish freshness was developed and applied to the determination of the K(1) parameter (freshness indicator): K(1) = ([HXR] + [HX])/([IMP] + [HXR] + [HX]) x 100, where [IMP], [HXR] and [HX] are inosine monophosphate, inosine and hypoxanthine concentrations, respectively. A platinum electrode is used to detect hydrogen peroxide produced by the enzymatic reaction catalysed by xanthine oxidase immobilised on the electrode surface. The determination of inosine and inosine monophosphate was performed by the addition of nucleoside phosphorylase, 5'-nucleotidase or alkaline phosphatase to the buffer solution. Parameters such as type of buffer, amount of enzymes and sample treatment were optimised. With this procedure a linear response was obtained in the concentration range 1 x 10(-6)-2 x 10(-5)mol 1(-1) for hypoxanthine, inosine and inosine monophosphate. The detection limit was 5 x 10(-7) mol 1(-1).     

Development and application of a biosensor for hypoxanthine in fish extract

A hypoxanthine biosensor was constructed using immobilized xanthine oxidase and a polarographic electrode. The enzyme was covalently immobilized on a commercially available preactivated nylon membrane. The polarographic electrode detected hydrogen peroxide and uric acid released during the enzymatic reaction. The electrode responded linearly to hypoxanthine concentration in the range 3.6–107 μM. When applied to the determination of hypoxanthine in several fish meats, the results obtained agreed well with those obtained by the conventional enzymatic method. More than 40 assays could be performed with the same membrane and each sample could be assayed in ca. 2–3 min. The biosensor provides a reliable, simple, rapid and economical method for the measurement of hypoxanthine, a useful indicator of fish freshness.     

Comparative Study of Pesticides Analysis Using Enzyme Inhibition Sensor and Gas Chromatography Methods

Pesticides are widely used in paddy field to control pests, diseases, weeds and other rice pathogens in minimizing a serious loss in rice production. The presence of pesticide residues and metabolites in rice, water, soil, currently represents a major environmental pollutant issues. It sometime will cause insect pest outbreaks in paddy field. An electrochemical enzyme inhibition sensor using screen-printed carbon working electrode with onboard carbon counter and silver–silver chloride pseudo-reference electrode for insecticides detection is described in this paper (Figure 1). The detection is based on the inhibition of insecticides used in paddy field towards acetyl-cholinesterase enzyme (AChE) with the presence of Acetylthiocholine Iodide (ATCh) substrate on the sensor surface. The mixtures of AChE enzyme (0.02 UmL^-1), electron mediator, TCNQ (1mM) and polypyrrole matrix (75 mM) were electro- polymerized on the sensor surface with a constant potential of 1.0V for 20 minutes. The sensor was soaked for 5 minutes with insecticides standard or sample containing insecticides before the electrochemical measurement was taken by adding Acetylthiocholine Iodide substrate in KCl (0.08M, pH 7.5) which acts as the enzyme mediator /substrate system. The current measurement was conducted using chronoamperometry at 100mV vs. on board screen-printed Ag-AgCl pseudo- reference electrode. Comparative analysis of spiked water samples with 0.1ppm pesticides and real samples (paddy) also were conducted using enzyme inhibition sensor and gas chromatography methods. From the data analysis, it showed very comparable results with R² = 0.96 in the correlation plot for paddy samples samples. This makes the developed sensor a potential tool for the rapid, simple and sensitive detection of insecticides residues in agriculture industry.     

A screen-printed disposable biosensor for selective determination of putrescine

We have developed screen-printed carbon electrodes for the determination of putrescine (Put) via the enzyme monoamine oxidase that was immobilized on the surface of the electrode by cross-linking it with bovine serum albumin using glutaraldehyde. A mixture of 5 % of tetrathiofulvalene (TTF) and carbon ink was used for the fabrication of the screen-printed working electrode. Put was amperometrically detected by measurement of the current due to the oxidation of the mediator TTF. The use of TTF lowers the working potential to +250 mV (vs. a screen-printed Ag/AgCl reference electrode). Response is linear in the range from 16 to 101 μM, and the detection limit is 17.2?±?4.6 μM, with a reproducibility of 9.6 % (n?=?4) in terms of relative standard deviation. The effects of potentially interfering biogenic amines such as cadaverine, histamine, spermine, spermidine and tryptamine were also evaluated. The biosensor was successfully applied to the determination of Put in zucchini and anchovies.

Diffusion coefficient measurements in microfluidic devices

A glassy carbon electrode (GCE) modified with Pd/IrO(2) provides excellent electrocatalytic oxidation of hydrogen peroxide. Glucose oxidase (GOD) and xanthine oxidase (XOD) were co-immobilized on the modified electrode with a thin film Nafion coated on the enzyme layer to form a glucose (Glu)/hypoxanthine (Hx) sensor, without interference from electroactive species such as ascorbic acid (AA) and uric acid (UA). Its response was evaluated with respect to the enzyme amount on the electrode, pH and temperature of the electrolyte. The prepared bienzymic biosensor, used as the detector of HPLC gave a detection limit of 1.0x10(-6) mol l(-1) Glu and 2.0x10(-7) mol l(-1) Hx (Hx) with a linear concentration range of 5.0x10(-6)-2.5x10(-3) mol l(-1) and 1.0x10(-6)-5.0x10(-4) mol l(-1), respectively. Coupled with microdialysis, it was used to monitor the concentrations of Glu and Hx in rat brain.     

Flow amperometric detection of indigo for enzyme-linked immunosorbent assays with use of screen-printed electrodes

A simple and automated methodology for a sensitive electrochemical detection of enzyme immunoassays that employ alkaline phosphatase (AP) as label has been developed. A flow injection system with programmable pump, valve and cell functions, amperometric detection of indigo and screen-printed electrodes (SPEs) are responsible for the advantages of this methodology. Amperometric detection at a low potential of indigo, the product of the enzymatic hydrolysis of the substrate 3-indoxyl phosphate (IP), is combined with a flow injection system. This incorporates in the flow cell a disposable screen-printed board provided with a graphite working electrode. No electrode pretreatment is necessary to obtain reproducible signals. The system was applied to the determination by an enzyme-linked immunosorbent assays (ELISA) of pneumolysin (PLY), a toxin related to respiratory infections. Linear calibration curves for low and high concentration ranges were obtained. These were also performed in a proteic matrix and linearity was also obtained.     

Carbon paste-tetrathiafulvalene amperometric enzyme electrode forthe determination of glucose in flowing systems

The development of a carbon paste-tetrathiafulvalene amperometric enzyme electrode for the determination of glucose in flowing streams is described. The enzyme electrode is operated in a flow-through detector based on the wall-jet configuration under flow injection (FI) and steady-state (SS) conditions. Under FI conditions, high precision (0.6%) and sample throughput (120 samples h-1) are possible. Moreover no pre-conditioning of the electrode is required. The flow system is suitable for the determination of glucose in whole blood without sample dilution. With proper orientation of the jet with respect to the enzyme electrode, high accuracy can be obtained under SS conditions.     

Amperometric determination of sulfite using screen-printed electrodes modified with metallic nanoparticles

We report on the amperometric determination of sulfite using screen-printed carbon electrodes (SPCEs) modified with gold and silver nanoparticles that were deposited on the electrode to improve the capabilities of detection. The electrode is fairly selective and responds to sulfite with an oxidation current (at 300 mV and pH 6) in the 9.80 to 83.33 μM concentration range. The precision in terms of repeatability and reproducibility is 14.4 % and 10.7 % in the case of SPCEs modified by gold nanoparticles. The method was applied to the determination of sulfite in drinking water, pickle juice and vinegar. Recoveries ranged from 96 % to 104 %.

Simultaneous determination of hypoxanthine,inosine, inosine-5′-phosphate and adenosine-5′-phosphate with a multielectrode enzyme sensor

A multielectrode enzyme sensor for the simultaneous determination of adenosine-5′-phosphate (AMP), inosine-5′-phosphate (IMP), inosine (HXR) and hypoxanthine (HX)in fish meat was developed by assembling four enzyme sensors for AMP, IMP, HXR and HX in a flow cell. These compounds were determined from oxygen consumption according to the following reactions: AMP $\text{AD}$ IMP $\text{NT}$ HXR $\text{NP, PO}{}^{\mathrm{3?}}{}_4$ HX $\text{XO, O}{}_2$ Uric acid where AD is AMP deaminase, NT is 5′-nucleotidase, NP is nucleoside phosphorylase and XO is xanthine oxidase. Enzymes were covalently bound to a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane and glutaraldehyde. Sensors for HX, HXR, IMP and AMP were prepared by attaching membranes of XO, XONP, XO NPNT, and of XONPNT and AD, respectively, to four oxygen electrodes. Samples extracted from sea bass, bream, flounder, abalone and arkshell were analyzed within 5 min, from the simultaneous response curves of the four electrodes. Results obtained by the multisensor system were in good agreement with those determined by each single electrode.     

Analytical performance characteristics of thin and thick film amperometric microcells

The analytical performance of amperometric microcells with different electrode geometries is compared for enzyme activity measurements. The microcells were fabricated with thin film photolithography or thick film screen-printing in four different designs. The cells made with the thin film process used flexible substrate with microelectrode array or a circular, disk-shaped working electrode. The screen-printed working electrodes had semicircle or disk shape on ceramic chips. Putrescine oxidase (PUO) activity measurement was used as a model. The determination of PUO activity is important in the clinical diagnosis of premature rupture of the amniotic membrane. An electropolymerized m-phenylenediamine size-exclusion layer was used to eliminate common interferences. The size exclusion layer revealed also to be advantageous in protecting the electrodes from fouling by putrescine (enzyme substrate). The electrode fouling of bare electrodes was insignificant for screen-printed electrodes, but very severe for electroplated platinum working electrodes. The microelectrode array electrodes demonstrated smaller RSD and higher normalized sensitivities for hydrogen peroxide and PUO activity. All the other electrodes were demonstrating comparable analytical performances.     

Analytical performance characteristics of thin and thick film amperometric microcells

The analytical performance of amperometric microcells with different electrode geometries is compared for enzyme activity measurements. The microcells were fabricated with thin film photolithography or thick film screen-printing in four different designs. The cells made with the thin film process used flexible substrate with microelectrode array or a circular, disk-shaped working electrode. The screen-printed working electrodes had semicircle or disk shape on ceramic chips. Putrescine oxidase (PUO) activity measurement was used as a model. The determination of PUO activity is important in the clinical diagnosis of premature rupture of the amniotic membrane. An electropolymerized m-phenylenediamine size-exclusion layer was used to eliminate common interferences. The size exclusion layer revealed also to be advantageous in protecting the electrodes from fouling by putrescine (enzyme substrate). The electrode fouling of bare electrodes was insignificant for screen-printed electrodes, but very severe for electroplated platinum working electrodes. The microelectrode array electrodes demonstrated smaller RSD and higher normalized sensitivities for hydrogen peroxide and PUO activity. All the other electrodes were demonstrating comparable analytical performances.     

The study of nafion/xanthine oxidase/au colloid chemically modified biosensor and its application in the determination of hypoxanthine in myocardial cells in vivo

A novel hypoxanthine (Hx) microsensor was constructed. In this work, Nafion xanthine oxidase (XOD) and Au colloid were immobilized onto the surface of a Pt microelectrode. The enzyme biosensor displayed a quick and sensitive response to Hx. Under physiological conditions, a low detection limit, with high selectivity and sensitivity for Hx determination were obtained. The oxidation current [investigated using current-time (I-t) plots] was linear with Hx concentration ranging from 2.0 x 10(-7) to 2.0 x 10(-5) mol L(-1) with a calculated detection limit of 1.0 x 10(-7) mol L(-1) (S/N of 3). The biosensor should be promising for in vivo measurement of Hx without interferences and fouling. The change of Hx concentration in cardiac myocytes stimulated by L-arginine (L-Arg) and acetylcholine (Ach) was also studied.     

Solid-phase microextraction of sulfonylurea herbicides by using borate-reinforced multiple monolithic fibers

Microchimica Acta - The authors describe a highly sensitive method for the aptamer (Apt) based impedimetric determination of cocaine. The surface of a screen-printed electrode (SPE) was modified...     

Septonex-tetraphenylborate screen-printed ion selective electrode for the potentiometric determination of Septonex in pharmaceutical preparations

A screen-printed electrode (SPE) was fabricated for the determination of 1-(ethoxycarbonyl)pentadecyltrimethylammonium bromide (Septonex) based on the use of Septonex-tetraphenylborate as the electroactive substance, and o-nitrophenyloctylether (o-NPOE) as the plasticizing agent. The electrode passes a near-Nernstian cationic slope of 59.33 ± 0.85 mV from activity between pH values of 2 to 9 with a lower detection limit of 9×10(-7) M and response time of about 5 s and exhibits an adequate shelf-life of 6 months. The method was applied for the determination of Septonex in pharmaceutical preparations. A percentage recovery of 99.88% was obtained with RSD=1.24%. The electrode was successfully applied in the determination of Septonex in laboratory-prepared samples by direct potentiometric, calibration curve and standard addition methods. Potentiometric titration of Septonex with sodium tetraphenylborate and phosphotungstic acid as a titrant was monitored with the modified screen-printed electrode as an end-point indicator electrode. Selectivity coefficients for Septonex relative to a number of potential interfering substances were determined. The sensor was highly selective for Septonex over a large number of compounds. Selectivity coefficient data for some common ions show negligible interference; however, cetyltrimethylammonium bromide and iodide ions interfere significantly. The analytical usefulness of the proposed electrode was evaluated by its application in the determination of Septonex in laboratory-prepared pharmaceutical samples with satisfactory results. The results obtained with the fabricated sensor are comparable with those obtained by the British Pharmacopeia method.     

A disposable, screen-printed electrode for the amperometric determination of azide based on the immobilization with catalase or tyrosinase.

A disposable, screen-printed electrode based on the immobilization of catalase or tyrosinase was developed to construct biosensors for the amperometric determination of azide. The determination principles for azide by these two methods are based on inhibiting the enzymatic consumption of an electrode-detectable substance (hydrogen peroxide or catechol) on an enzyme-immobilized electrode. Both of these methods show a sensitive detection range and a short measuring time.     

Examination of performance of glassy carbon paste electrode modified with gold nanoparticle and xanthine oxidase for xanthine and hypoxanthine detection

A composite electrode was prepared by modifying glassy carbon microparticles with gold nanoparticles (Au-nps) and xanthine oxidase enzyme (XOD) for xanthine (X) and hypoxanthine (Hx) detection. After the optimization of the system for X, the biosensor was characterized for X and Hx. A linearity was obtained in the concentration range between 5.00 × 10⁻⁷ and 1.00 × 10⁻⁵ M for X with equation of y = 0.24x + 0.712 and 5.00 × 10⁻⁶ to 1.50 × 10⁻⁴ M for Hx, with equation of y = 0.014x + 0.575, respectively. Obtained results were compared to X and/or Hx biosensors including/not including Au-np in the structure. The developed system was also applied for detection of Hx in canned tuna fish sample and very promising results were obtained.