Study of the selective extraction of iron (III) by silica-immobilized 5-formyl-3-arylazo-salicylic acid derivatives

A method for immobilization of 5-formyl-3-arylazosalicylic acid derivatives on the surface of silica gel is described. The new silica gel phases were synthesized by a very simple and rapid route which can be defined as a one-step reaction. The phases were proved to show an excellent improvement in the iron (III) extraction and the determined mmol g(-1) values are in the range of 1.24 - 1.32. The metal-uptake properties of eleven metal ions were also evaluated at different pH values and shaking times. The process of selective extraction of iron (III), in presence of an interfering ion, by these phases was also studied by both column and batch equilibrium techniques in order to identify the possible type of interference of each metal ion in this process. Three divalent metal ions (Mg, Ca and Mn) exhibited a minimum interference in iron (III) extraction. A group of six divalent metal ions (Co, Ni, Cu, Zn, Cd and Pb) were found to be interfering in the selective extraction of iron (III) via the arylazo-moiety of the silica phase, while Cr(III) was found to show a specific interference type based on the affinity of Cr(III) for binding to the chelation centers of the salicylic acid moiety of the silica phase.     

Selective solid phase extraction and preconcentration of iron(III) based on silica gel-chemically immobilized purpurogallin

The immobilization of purpurogallin on the surface of amino group containing silica gel phase for the formation of a newly synthesized silica gel-bound purpurogallin (SGBP) is described. The surface modification was studied and evaluated by determination of the surface coverage value by both the elemental analysis and metal probe testing method, which was found to be 0.485 and 0.460 mmol g⁻¹, respectively. The metal sorption properties of SGBP were examined by a series of di- and tri-valent metal ions. The metal capacity values (mmol g⁻¹) for this series of metal ions were also determined under different buffer solutions (pH 1.0–6.0) as well as shaking times by the batch equilibrium technique. The results of this study confirmed the strong affinity and selectivity as well as the fast equilibration and interaction processes of SGBP and Fe(III) compared to the other tested metal ions. The reduction–oxidation process of iron(II)/iron(III) by SGBP was also studied and the results indicated only 2.1% reduction of iron(III) into iron(II). The selectivity incorporated into silica gel phase via the immobilization of purpurogallin was intensively studied for a several binary mixtures containing iron(III)—another interfering metal ion. The determined percentage extraction values of iron(III) from these mixtures were found to be in the range of 94–100%. The potential applications of SGBP as a selective solid extractor for iron(III) from natural tap water samples and real matrices were also studied and the results revealed good percentage extraction values of iron(III) (93.5−94.9±4.6−5.3%) of the spiked iron(III) in the acidified tap water samples as well as a high preconcentration factor of 500 was also established when SGBP was used as a selective solid phase extractor and preconcentration of iron(III) from acidified soft drink samples with percentage recovery values of (98.0−97.4±4.7−5.3%) of the spiked iron(III).     

Synthesis, characterization and structure effects on selectivity properties of silica gel covalently bonded diethylenetriamine mono- and bis-salicyaldehyde and naphthaldehyde Schiff(,)s bases towards some heavy metal ions

Four silica gel-immobilized new metal chelate Schiff(,)s bases were synthesized (I-IV). Silica gel chemically bonded diethylenetriamine mono-naphthaldehyde and mono-salicyaldehyde Schiff's bases (phases I and III) were produced via the interaction of silica gel-modified diethylenetriamine with naphthaldehyde and salicylaldehyde, respectively. However, phases II and IV arose through the interaction of bis-naphthaldehyde and bis-salicylaldehyde Schiff(,)s bases of diethylenetriamine with 3-chloropropyltrimethoxysilane modified silica gel. The characterization of such new phases, their capabilities towards selective extraction or separation of Fe(III), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) ions were studied and evaluated by both batch and column techniques as a function of pH and time of contact. Phases III and I showed high performance towards Cu(II) extraction, where their Cu(II) sorption determined to be 0.957 and 0.940 mmol g(-1), respectively. However, for phases IV and II, the great affinity was devoted to Fe(III) extraction followed by Cu(II) ions. The reactivity of metal ion sorption was discussed in the light of effects of bulkiness as well as orientation of immobilized chelate on sorbent reactivity. Donor sites of phases III and I (diethylenetriamine and azomethene nitrogens along with phenolic hydroxyl group oxygen) are fully active, whereas phases IV and II are partially active with only participation of oxygen and azomethene nitrogen. The order of increasing thermal stability (IV相似文献   

Reactivity of Thioglycolic Acid Physically and Chemically Bound to Silica Gel as New Selective Solid Phase Extractors for Removal of Heavy Metal Ions From Natural Water Samples

A method is presented for the immobilization of thioglycolic acid moiety on the surface of active silica gel via a simple and direct synthetic route and based on one step reaction procedure. Two-product solid phase extractors were successfully synthesized according to physical adsorption and chemical immobilization binding techniques, phases (I) and (II), respectively. The mode of interaction between the silanol group and the thioglycolic moiety was also discussed for both phases based on the infrared analysis studies. The thermal stability properties as well as the effect of buffer solutions on the percentage hydrolysis of the two silica gel phases were examined and revealed the high stability and superiority of silica phase (II) in these respects. The evaluation of the selectivity and metal uptake properties incorporated in these two silica gel phases were also studied and discussed for a series of divalent heavy metal ions under different controlling factors. The mmol/g values were found to be higher in case of phase (I). The selective removal and extraction of some heavy metal ions, viz . Cu(II), Zn(II), and Hg(II) from natural seawater samples was successfully accomplished with the percentage recovery values for the three tested metal ions in the range of 96.5-98.4 - 0.2-0.6%. The presence of higher concentrations of Na(I), K(I), Mg(II) and Ca(II) showed insignificant role or no matrix effect on such selective extraction process due to their 0% values of removal by these silica gel phases (I) and (II).     

Controlled-pore silica glass modified with N-propylsalicylaldimine for the separation and preconcentration of trace Al(III), Ag(I) and Hg(II) in water samples.

Controlled-pore silica glass modified with N-propylsalicylaldimine (SCPSG) has been investigated as a surface-active matrix for the separation of some metal ions. The porous silica glass base was confirmed to have better stability towards hydrolysis in aqueous solution buffered at pH=9 in comparison to silica gel, which showed twice the surface area of controlled-pore silica glass. The different analytical parameters affecting the batch mode separation and preconcentration of trace Al(II), Ag(I) and Hg(II) in environmental samples using SCPSG, prior to their determination using inductively coupled plasma mass spectrometry (ICP-MS), were studied. The optimum conditions are pH 9.0 +/- 0.1, time of stirring 30 min and the eluent concentration 0.5 mol dm(-3) HNO3. The ion-exchange capacity of SCPSG with respect to Al(III), Ag(I) and Hg(II) was 0.27, 0.18 and 0.23 mmol g(-1), respectively. The recovery values for the metal ions were 96.8 +/- 0.86, 98.1 +/- 0.60 and 96.2 +/- 1.06%, and the analytical detection limits were 26.1, 1.49 and 0.44 pg cm(-3), respectively, for a preconcentration factor of 100. The method has been applied to the determination of the investigated metal ions in natural water samples as well as certified and reported samples and the results were found to be accurate.     

Solid-phase extraction of trace Cu(II) Fe(III) and Zn(II) with silica gel modified with curcumin from biological and natural water samples by ICP-OES

Silica gel was firstly functionalized with aminopropyltrimethoxysilane obtaining the aminopropylsilica gel (APSG). The APSG was reacted subsequently with curcumin yielding curcumin-bonded silica gel (curcumin-APSG). This new bonded silica gel was used for separation, pre-concentration and determination of Cu(II), Fe(III), Zn(II) in biological and natural water samples by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective adsorption of trace levels of metal ions were optimized with respect to different experimental parameters using batch and column procedures in detail. The optimum pH value for the separation of metal ions simultaneously on the newly sorbent was 4.0. Complete elution of the adsorbed metal ions from the sorbent surface was carried out using 2.0 mL of 0.1 mol L^− 1 of HCl. Common coexisting ions did not interfere with the separation and determination at pH 4.0. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 0.63, 0.46 and 0.37 mmol g^− 1 for Cu(II), Fe(III) and Zn(II) respectively. The time for 95% sorption for Cu(II) Fe(III) and Zn(II) was less than 2 min. The detection limits of the method defined by IUPAC was found to be 0.12, 0.15 and 0.40 ng mL^− 1 for Cu(II), Fe(III) and Zn(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was lower 3.0% (n = 5). The procedure was validated by analyzing the certified reference river sediment material (GBW 08301, China), the results obtained were in good agreement with standard values. This sorbent was successfully employed in the separation and pre-concentration of trace Cu(II), Fe(III) and Zn(II) from the biological and natural water samples yielding 75-fold concentration factor.     

On-line coupling of supercritical fluid extraction with high-performance liquid chromatography for the determination of explosives in vapour phases

An investigation into the selectivity of an iminodiacetic acid (IDA) modified silica gel column for transition and heavy metal ions using non-chelating inorganic eluents has been carried out. A number of eluent parameters were investigated to determine the exact retention mechanism taking place and to control selectivity. The parameters studied were eluent ionic strength and the nature of the inorganic salt used, eluent pH and eluent temperature. The results obtained showed how despite certain metal ions exhibiting similar stability constants with the bonded IDA groups, careful control of each of the above parameters, in particular eluent chloride ion concentration and eluent temperature, could result in large changes in selectivity. Optimal conditions for the isocratic and gradient separation of Mg(II), Ca(II), Mn(II), Cd(II), Co(II), Zn(II) and Pb(II) were determined. An isocratic method using a 0.035 M KCl, 0.065 M KNO3 (pH 2.5) eluent was successfully applied to the determination of Mn(II), Cd(II), Co(II) and Zn(II) at concentrations between 20 and 121 microg/l in a freshwater certified reference material (NIST 1640).     

Silica gel-immobilized-dithioacetal derivatives as potential solid phase extractors for mercury(II)

Dithioacetal derivatives with different para-substituents, XH, CH(3), OCH(3), Cl and NO(2) were synthesized and chemically immobilized on the surface of silica gel for the formation of five newly synthesized silica gel phases (I-V). Characterization of the silica gel surface modification by the organic compounds was accomplished by both the surface coverage determination as well as the infrared spectroscopic analysis. The metal sorption properties of the silica gel phases were studied to evaluate their performance toward metal-uptake, extraction and selective extraction processes of different metal ions from aqueous solutions based on examination of the various controlling factors. The studied and evaluated factors are the pH effect of metal ion solution on the metal capacity values (mmol g(-1)), equilibration shaking time on the percent extraction as well as the structure and substituent (X) effects on the determined mmol g(-1) values. The results of these studies revealed a general rule of excellent affinity of these silica gel phases-immobilized-dithioacetal derivatives for selective extraction of mercury(II) in presence of other interfering metal ions giving rise to a range of 94-100% extraction of the spiked mercury(II) in the metal ions mixture. The potential application of the newly synthesized silica gel phases (I-V) for selective extraction of mercury(II) from two different natural water samples, namely sea and drinking tap water, spiked with 1.0 and 10.0 ng ml(-1) mercury(II) were also studied by column technique followed by cold vapour atomic absorption analysis of the unretained mercury(II). The results indicated a good percent extraction and removal (90-100+/-3%) of the spiked mercury(II) by all the five silica gel phases. In addition, insignificant contribution by the matrix effect on the processes of selective solid phase extraction of mercury(II) from natural water samples was also evident.     

Selective Pre-concentration and Solid Phase Extraction of Mercury（Ⅱ） from Natural Water by Silica Gel-loaded （E）-N-（1-Thien-2＇-ylethylidene）-1,2-phenylenediamine Phase

Silica gel-loaded （E）-N-（1-thien-2＇-ylethylidene）-1,2-phenylenediamine （TEPDA） phase was synthesized based on physical adsorption approaches. The stability of a chemically modified TEPDA especially in concentrated hydrochloric acid that was then used as a recycling and preconcentration reagent allowed the further uses of silica gel-loaded immobilized TEPDA phase. The application of this silica gel-loaded phase to sorption of a series of metal ions was performed by using different controlling factors such as the pH of the metal ion solution and the equilibration shaking time by the static technique. This difference was interpreted on the basis of selectivity incorporated in these sulfur containing silica gel-loaded TEPDA phases. Hg（Ⅱ） was found to exhibit the highest affinity towards extraction by these silica gel-loaded TEPDA phases. The pronounced selectivity was also confirmed by the determined distribution coefficients （Kd） of all the metal ions, showing the highest value reported for mercury（Ⅱ） extraction by the silica gel immobilized TEPDA phase. The potential applications of the silica gel immobilized TEPDA phase to selective extraction of mercury（Ⅱ） from aqueous solution were successfully accomplished and preconcentration of low concentration of Hg（Ⅱ） （30 pg·mL^-1） from natural tap water with a preconcentration factor of 200 for Hg（Ⅱ） off-line analysis was conducted by cold vapor atomic absorption analysis.     

High-performance ligand-exchange liquid chromatography (HPLEC) of aromatic amines with copper(II), nickel(II) and zinc(II) loaded chelating silica gel columns

Summary An 8-hydroxyquinoline, 8-hydroxy-5-sulphonic-acid-quinoline and a 2-amino-1-cyclopentene-1-dithiocarboxylic acid silica gel, loaded with copper(II), nickel(II) or zinc(II) were examined for the separation of some aromatic amines in the normal phase mode. All phases studied interact strongly with the sample compounds, but the presence of cations increases the selectivity of the columns drastically in some cases. Nickel(II) or zinc(II) loading proved to be better than copper(II) loading, because with these ions strong peak broadening and disturbances of the baseline are avoided. Endcapping of the chelating silica gels was indispensable in order to obtain reasonable efficiencies.     

Determination of Cu(II) and Zn(II) using silica gel loaded with 1-(2-thiasolylazo)-2-naphthol

The silica gel with 1-(2-thiasolylazo)-2-naphthol adsorbed was obtained. The adsorption of Cu(II) and Zn(II) from an aqueous solution onto loaded silica gel was studied. The capabilities of 1-(2-thiasolylazo)-2-naphthol immobilized for Cu(II) and Zn(II) preconcentration, visual and diffusion reflectance spectroscopic detection was evaluated. The detection limits were 10 and 15 microg.l(-1), respectively. Visual test scales for metal ions determination in the range 0.65-13 microg per sample were worked out. The developed methods were applied to Cu(II) and Zn(II) determination in natural and tap water. The obtained results agreed well with the reported value.     

Influence of Solvent Acidity on Equilibrium Sorption of Zn(II) and Cd(II) by Cellulose-based Polymers

The influence of the solvent acidity on the sorption capacity of cellulose ethers and esters for Zn(II) and Cd(II) ions was studied. The suggested scheme of pH dependence of the sorption equilibrium of Zn(II) and Cd(II) ions in anaqueous electrolyte solution-polymer heterogeneous system, takes into account the speciation of metal ions in the aqueous phase (cationic aqua complexes).     

Modification of silica nanoparticles with 1-hydroxy-2-acetonaphthone as a novel composite for the efficient removal of Ni(II), Cu(II), Zn(II), and Hg(II) ions from aqueous media

In this paper, a novel composite based on the formation of Schiff base on silica nanoparticles was facilely synthesized. Firstly, silica nanoparticles, which contain silanol groups (Si-OH), were modified with (3-aminopropyl)trimethoxysilane. Then, the modified silica reacted with 1-hydroxy-2-acetonaphthone to form a novel Schiff base/silica composite. The synthesized composite was characterized using several tools such as XRD, FT-IR, FE-SEM, N₂ adsorption/desorption analyzer, and CHN analyzer. The considerable reduction at 2θ = 21.9° in the intensity of the XRD peak of the composite is owing to the formation of the Schiff base. Also, the observed FT-IR bands in the composite at 3440 and 1604 cm^?1 are owing to the stretching and bending vibrations of OH and/or CN, respectively. The FE-SEM images confirmed that the silica includes irregular shapes whereas the composite possesses a flaky surface owing to the formation of the Schiff base. Elemental analysis of the composite demonstrated that the % C, % H, and % N are 15.26, 3.24, and 1.65 %, respectively. The BET surface area and total pore volume of the composite were reduced because the formed Schiff base blocks the pores of silica. The synthesized composite was employed for the efficient removal of Ni(II), Cu(II), Zn(II), and Hg(II) ions from aqueous media. The maximum uptake capacity of the composite toward Cu(II), Hg(II), Zn(II), and Ni(II) ions is 68.630, 50.942, 45.126, and 40.420 mg/g, respectively. The adsorption processes of the studied metal ions were spontaneous, chemical, and well described using the pseudo-second-order kinetic model and Langmuir equilibrium isotherm. The synthesized composite can be successfully regenerated and utilized various times in the removal of studied metal ions from aqueous media.     

New solid phase extractors for selective separation and preconcentration of mercury (II) based on silica gel immobilized aliphatic amines 2-thiophenecarboxaldehyde Schiff’s bases

2-Thiophenecarboxaldhyde is chemically bonded to silica gel surface immobilized monoamine, ethylenediamine and diethylenetriamine by a simple Schiff’s base reaction to produce three new SP-extractors, phases (I-III). The selectivity properties of these phases toward Hg(II) uptake as well as eight other metal ions: Ca(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) were extensively studied and evaluated as a function of pH of metal ion solution and equilibrium shaking time by the batch equilibrium technique. The data obtained clearly indicate that the new SP-extractors have the highest affinity for retention of Hg(II) ion. Their Hg(II) uptake in mmol g⁻¹ and distribution coefficient as log K_d values are always higher than the uptake of any other metal ion along the range of pH used (pH 1.0-10.0). The uptake of Hg(II) using phase I was 2.0 mmol g⁻¹ (log K_d 6.6) at pH 1.0 and 2.0. 1.8 mmol g⁻¹ (log K_d 4.25), 1.6 mmol g⁻¹ (log K_d 3.90) and 1.08 mmol g⁻¹ (log K_d 3.37) at pH 3.0, 5.0 and 8.0, respectively. Selective separation of Hg(II) from the other eight coexisting metal ions under investigation was achieved successfully using phase I at pH 2.0 either under static or dynamic conditions. Hg(II) was completely retained while Ca(II), Co(II) and Cd(II) ions were not retained. Ni(II), Cu(II), Zn(II), Pb(II) and Fe(III) showed very low percentage retention values to be 0.74, 0.97, 3.5 and 6.3%, respectively. Moreover, the high recovery values (95.5 ± 0.5, 95.8 ± 0.5 and 99.0% ± 1.0) of percolating two liters of doubly distilled water, drinking tap water and Nile river water spiked with 5 ng/l of Hg(II) over 100 mg of phase I packed in a minicolumn and used as a thin layer enrichment bed demonstrate the accuracy and validity of the new SP-extractors for preconcentration of the ultratrace amount of spiked Hg(II) prior to the determination by borohydride generation atomic absorption spectrometry (AAS) with no matrix interference. The detection limit (3σ) for Hg(II) based on enrichment factor 1000 was 4.75 pg/ml. The precision (R.S.D.) obtained for different amounts of mercury was in the range 0.52-1.01% (N = 3) at the 25-100 ng/l level.     

1,8-Dihydroxyanthraquinone anchored on silica gel: synthesis and application as solid phase extractant for lead(II), zinc(II) and cadmium(II) prior to their determination by flame atomic absorption spectrometry

A new chelating matrix has been prepared by immobilizing 1,8-dihydroxyanthraquinone (DHAQ) on silica gel modified with (3-aminopropyl)triethoxysilane. After characterizing the matrix with thermogravimetric analysis (TGA), cross polarization magic angle spinning (CPMAS) NMR and diffuse reflectance infrared fourier transformation (DRIFT) spectroscopy, it has been used to preconcentrate Pb(II), Cd(II) and Zn(II) prior to their determination by flame atomic absorption spectrometry. The optimum pH ranges for quantitative sorption are 6.0-7.5, 7.0-8.0 and 6.0-8.0 for Pb, Zn, and Cd, respectively. All the metal ions can be desorbed with 2 mol l(-1) HCl/HNO(3). The sorption capacity of the matrix has been found to be 76.0, 180.0 and 70.2 mumol g(-1) for Pb, Zn and Cd, respectively, with the preconcentration factor of approximately 200. The limits upto which electrolytes NaNO(3), NaCl, NaBr, Na(2)SO(4), Na(3)PO(4) sodium citrate, EDTA, glycine and humic acid and cations Ca(II), Mg(II), Cu(II), Co(II), Ni(II), Mn(II) Al(III), Cr(III) and Fe(III) can co-exist with the metal ions during their sorption without any adverse effect are reported. The lowest concentration of metal ions for quantitative recovery is 5.0 ng ml(-1) The simultaneous enrichment and determination of all the metals is possible if total load of metal ions is less than sorption capacity. The flame AAS was used to determine these metal ions in underground, tap and river water samples (relative standard deviation (R.S.D.)相似文献   

Silica gel surface modified with sulfanilamide for selective solid-phase extraction of Cu(II), Zn(II) and Ni(II)

A new chelating matrix has been prepared by immobilising sulfanilamide (SA) on silica gel (SG) surface modified with 3-chloropropyltrimethoxysilane as a sorbent for the solid-phase extraction (SPE) Cu(II), Zn(II) and Ni(II). The determination of metal ions in aqueous solutions was carried out by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective sorption of trace levels of Cu(II), Zn(II) and Ni(II) were optimised with respect to different experimental parameters using the batch and column procedures. The presence of common coexisting ions does not affect the sorption capacities. The maximum sorption capacity of the sorbent at optimum conditions was found to be 34.91, 19.07 and 23.62 mg g^?1 for Cu(II), Zn(II) and Ni(II), respectively. The detection limit of the method defined by IUPAC was found to be 1.60, 0.50 and 0.61 µg L^?1 for Cu(II), Zn(II) and Ni(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 4.0% (n = 8). The method was applied to the recovery of Cu(II), Zn(II) and Ni(II) from the certified reference material (GBW 08301, river sediment) and to the simultaneous determination of these cations in different water samples with satisfactory results.     

Selective separation of silver(I) and mercury(II) ions in natural water samples using alumina modified thiouracil derivatives as new solid phase extractors

A simple and reliable solid-phase extraction (SPE) method has been developed to synthesise two new sorbents: 6-propyl-2-thiouracil and 5,6-diamino-2-thiouracil physically loaded onto alumina surface, phases I and II, respectively. The synthesis of these new phases has been confirmed by IR-spectroscopy. The surface concentrations of the organic moieties were determined to be 0.182 and 0.562 mmol g^?1 for phases I and II, respectively. The evaluation of the selectivity and metal uptake properties incorporated in these two alumina phases were also studied and discussed for 10 different metal ions: Ca(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Hg(II), Pb(II) and Ag(I) under different controlling factors. The data obtained clearly indicated that the new SP-extractors have the highest affinity for retention of Hg(II) ions. Selective separation of Hg(II) from Ag(I) as one of the most interfering ion, in addition to the other eight coexisting metal ions under investigation, was achieved successfully using the new sorbents at pH = 9.0 under static conditions. Therefore, Hg(II) exhibits major retention percentage (100.0%) using phase I or II. However, Ag(I) exhibits minor retention percentage equal to 1.33% using phase I and 0.67% using phase II. On the other hand, the retention percentage of the other eight metal ions ranged (0.0–3.08%) using phase I and (0.0–1.54%) using phase II at the same pH. The new phases were applied for separation and determination of trace amounts of Hg(II) and Ag(I) spiked natural water samples using cold vapour atomic absorption spectroscopy and atomic absorption spectroscopy with no matrix interference. The high recovery values of Hg(II) and Ag(I) obtained using phases I and II were ranged 98.9 ± 0.1–99.2 ± 0.05% along with a good precision (RSD% 0.01–0.502%, N = 3) demonstrate the accuracy and validity of the new sorbents for separation and determination of Hg(II) and Ag(I).     

Separation and analysis of aluminium(III) by cation exchange ion chromatography

A method for the determination of aluminium(III) ions based on separation by cation exchange column chromatography and detection by conductivity detector has been developed. It is fast and reliable, and can be used for the separation and analysis of aluminium(III) ions from other metal ions like Mg(II), Mn(II), Zn(II), Co(II), Ca(II), Sr(II), rare earth elements like Lu(III), Tm(III), and Gd(III), which are eluted at different times and so do not interfere. Effect of p-phenylene diamine concentration present in the eluent, presence of other metal ions and effect of various anions present in the injection sample on the separation and analysis of aluminium(III) ions have also been studied.     

High-performance thin-layer chromatography of metal complexes ofmeso-tetrakis(p-tolyl)porphyrin on cellulose and silica gel

Summary The migration behavior of metal complexes ofmeso-tetrakis(p-tolyl)porphyrin (TTP) are studied in HPTLC systems with cellulose and silica gel thin-layers and various organic solvents of relatively low polarity. The mobility of the metal complex tends to increase in the following orders of its central-metal elements: on cellulose, Mg(II)<Zn(II)<V(IV)<(H)<Pd(II)< Ni(II)Cu(II); on silica gel, Mg(II)<V(IV)<Zn(II)= (H)<Ni(II)Pd(II)Cu(II). Recommendable phase system for the separation of metal-TTP complexes is a combination of silica gel thin-layer with a carbon disulfide-m-xylene mixture though the complexes of Ni, Cu and Pd are not completely resolved.     

Complexation of [S,S,S]- and [R,S,R]-isomers of N-bis [2-(1,2-dicarboxyethoxy)ethyl] aspartic acid with Mg(II), Ca(II), Mn(II), Fe(III), Cu(II) and Zn(II) ions in aqueous solution

In a search for environmentally friendly metal chelating ligands for industrial applications, the protonation and complex formation equilibria of [S,S,S]- and [R,S,R]-isomers of N-bis[2-(1,2-dicarboxyethoxy)ethyl] aspartic acid (BCA6) with Mg(II), Ca(II), Mn(II), Fe(III), Cu(II) and Zn(II) ions in aqueous 0.1 M NaCl solution were studied at 25°C by potentiometric titration. The model for complexation and the stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. With all metal ions (M ⁿ⁺), stable ML ^n?6 complexes dominated complex formation for both isomers. Differences in complexation models were found for binuclear species.