Solid-Phase microextraction with Whatman 1PS paper and direct room-temperature solid-matrix luminescence analysis

Solid-phase microextraction has been combined with solid-matrix luminescence for the detection of a variety of compounds at sub-nanogram levels for the first time. Whatman 1PS paper was placed in water solutions of polar and nonpolar compounds for the selective removal of the nonpolar compounds such as benzo(a)pyrene. Distribution constants were obtained for 4-phenylphenol, benzo(f)quinoline, benzo(h)quinoline, phenanthrene, and benzo(a)pyrene. The distribution constants showed that phenanthrene and benzo(a)pyrene in water had a very strong affinity for the 1PS paper. Once the solutes were extracted for a fixed period of time, the 1PS paper was dried, and either the solid-matrix fluorescence or solid-matrix phosphorescence was detected from the adsorbed lumiphors by using the appropriate excitation wavelengths. It was a simple matter to detect at least three adsorbed compounds on the 1PS paper by solid-matrix luminescence. Benzo(a)pyrene was easily detected at a level of 0.02 ng ml⁻¹ in water.     

Determination of ciprofloxacin with a room-temperature phosphorescence flow-through sensor based on lanthanide-sensitized luminescence

Direct measurement of the sensitized luminescence of the europium-ciprofloxacin chelate immobilized on a cationic exchanger was used to develop a flow-through room-temperature phosphorescence optosensor for determination of ciprofloxacin. The phosphorescent chelate is formed on-line at room temperature in a flow-injection system and is immobilized on a weakly acidic cation-exchange resin packed in a flow cell. Optimum experimental conditions and analytical performance are discussed in detail. The sensor response for ciprofloxacin was linear, from 1.5 x 10(-6) to 2.0 x 10(-5)M with a relative standard deviation of 2.5% (n = 10) and a detection limit of 1.1 x 10(-7)M. The effect of possible interferences on sensor response was studied. The sensor was successfully tested for the determination of ciprofloxacin in pharmaceutical formulations.     

Metal nanoparticle-enhanced room temperature phosphorescence of diiodofluorescein on the filter paper substrate

<正>Metal-enhanced room temperature phosphorescence of diiodofluorescein was first observed on filter paper surface.The phosphorescence intensity is 2.5-fold brighter from diiodofluorescein on silver nanoparticles-deposited filter paper as compared with an identical control sample without silver nanoparticles.Furthermore,enhanced absorption was also observed for the same system.Our findings suggest that both singlet and triplet states can couple to surface plasmons and enhance phosphorescence quantum yields at room temperature,as well as to increase the excitation rate of lumophores at room temperature.     

Influence of polymer structure inhomogeneity on oxygen quenching of phenanthrene phosphorescence in poly(methyl methacrylate)

Decay kinetics of phenanthrene phosphorescence in atactic poly(methyl methacrylate) have been studied at 130–170 K in the presence of dissolved oxygen. The kinetics show anomalous behavior and cannot be described in terms of homogeneous diffusion of oxygen. Analysis of the dependence of the kinetics on oxygen concentration shows that such behavior is well accounted for by a polychromatic model assuming a dispersion of diffusion coefficients due to the inhomogeneity of the polymer structure. Possible errors in determining the diffusion coefficient from the phosphorescence quantum yield on the assumption of homogeneous diffusion are discussed. © 1992 John Wiley & Sons, Inc.     

The effects of ion-exchange filter papers and of heavy atoms on room-temperature phosphorescence of several indoles

Room-temperature phosphorescence (r.t.p.) of twelve indoles on different ion-exchange filter papers is examined. Anion-exchange filter paper Whatman DE-81 gives the largest r.t.p. signals in the presence of iodide; S & S 903 paper treated with diethylenetriamine-pentaacetic acid or supported carboxymethylcellulose resin are less useful. The heavy atom effect is necessary to observe analytically useful r.t.p. signals of indoles, with the trend iodide > thallium(I). Lifetimes of the r.t.p. of indoles are very short, in the millisecond range, and show two components. Absolute limits of detection between 0.2 and 14 ng show r.t.p. to be sensitive and simple analytical technique for these compounds.     

溶胶-凝胶法制备ZrO2/SiO2纳米复合材料的研究

利用溶胶-凝胶法制备了ZrO2/SiO2纳米复合物室温磷光材料,通过各条件的优化,最终确定溶剂为异丙醇、Zr摩尔掺杂百分含量为15%、550℃下煅烧3h得到的纳米ZrO2/SiO2复合物的室温磷光发光性能较好,其最大激发波长为280nm、发射波长为460nm,且磷光寿命为0.56s。     

Temperature effects on the solid-matrix luminescence properties of 4-phenylphenol adsorbed on filter paper

Experimental values of fluorescence quantum yield, phosphorescence quantum yield, and phosphorescence lifetime were obtained at temperatures from 23 degrees to -180 degrees for 4-phenylphenol adsorbed on filter paper. From the experimental values, rate constants for phosphorescence and radiationless transition from the triplet state were calculated along with the triplet formation efficiency. The data revealed several important aspects that are responsible for the room-temperature fluorescence and phosphorescence of 4-phenylphenol adsorbed on filter paper.     

Converting molecular luminescence to ultralong room-temperature phosphorescence via the excited state modulation of sulfone-containing heteroaromatics

Manipulating the molecular orbital properties of excited states and the subsequent relaxation processes can greatly alter the emission behaviors of luminophores. Herein we report a vivid example of this, with luminescence conversion from thermally activated delayed fluorescence (TADF) to ultralong room-temperature phosphorescence (URTP) via a facile substituent effect on a rigid benzothiazino phenothiazine tetraoxide (BTPO) core. Pristine BTPO with multiple heteroatoms shows obvious intramolecular charge transfer (ICT) excited states with small exchange energy, featuring TADF. Via delicately functionalizing the BTPO core with peripheral moieties, the excited states of the BTPO derivatives become a hybridized local and charge transfer (HLCT) state in the S₁ state and a local excitation (LE) dominated HLCT state in the T₁ state, with enlarged energy bandgaps. Upon dispersion in a polymer matrix, the BTPO derivatives exhibit a persistent bright green afterglow with long lifetimes of up to 822 ms and decent quantum yields of up to 11.6%.

The decoration of a BTPO core results in a change in the luminescence nature from TADF to URTP. The phosphors in an amorphous PMMA matrix showed monomeric URTP with phosphorescence lifetimes of up to 822 ms and quantum yields of up to 11.6%.     

Effects of polyacrylic acid on the room-temperature phosphorescence of selected compounds

Polyacrylic acid solutions of 4-phenylphenol, p-aminobenzoic acid, 1,2-benzocarbazole, and 5,6-benzoquinoline were spotted on filter paper and the results obtained by room-temperature phosphorescence were compared with similar samples spotted on filter paper without polyacrylic acid. Improvements in sensitivity ranged from 26 times to 1.1 times and limits of detection from 100 times to 1.1 times for the samples on filter paper with polyacrylic acid. The relative standard deviations for the samples with polyacrylic acid added were also improved.     

Slowing down of oxygen migration in the processes of radical oxidation and of phenanthrene phosphorescence quenching in methanol glasses at 90 K

The hydroxymethyl radical oxidation kinetics follows the second-order equation with a time-dependent rate constant, K(t). The annealing effect is described by way of dividing K(t) into two factors, one of them depending on the preliminary annealing time (τ): K(t) = K₁(t + τ)K₂(t). The time dependence of both factors is fairly well approximated by the power functions: K₁(t + τ) ≈ (t + τ)^−0.18 and K₂(t ≈ t^−0.26. The oxygen quenching of phenanthrene phosphorescence follows an exchange mechanism, with the static conditions setting in at 77 K. At 90 K oxygen diffusion adds to the quenching efficiency. The time of oxygen jumps (τ_j) and its time dependence under the matrix annealing at 90 K are determined by comparing the theoretical 1/τ_j dependence of the quenching volume with experiment. The 1/τ_j(τ) is well described by the power function τ^{−0.18 ± 0.02)}. The annealing time functions of the oxidation rate constant and of the inverse jumping time are similar. The oxidation rate constant and the diffusion constant coincide in the order of magnitude. Consequently, the slowing down of oxygen migration contributes essentially to the time dependence of the rate constant.     

Analytical and mechanistic aspects of the room-temperature fluorescence and phosphorescence of benzo(f)quinoline adsorbed on silica gel chromatoplates with humidified gases

The solid-matrix room-temperature fluorescence and room-temperature phosphorescence properties of benzo(f)quinoline adsorbed on silica gel chromatoplates were investigated over a wide range of humidities in N(2), air and O(2). Both neutral and acidic conditions were used and even at the highest relative humidity used, 93% relative humidity, the room-temperature fluorescence and phosphorescence intensities from benzo(f)quinoline were not totally quenched. However, in all experiments, the room-temperature phosphorescence was much more sensitive to humidity quenching than the room-temperature fluorescence. The results gave rather detailed information on quenching of the room-temperature fluorescence and phosphorescence in the different gases at a variety of humidities. It was possible to calculate the contribution to the percent decrease in luminescence due to moisture or a quenching gas. Thus, a more detailed assessment could be made about the quenching of moisture and individual quenching gases on the solid-matrix fluorescence and phosphorescence.     

Influence of the alkyl side chain length on the room-temperature phosphorescence of organic copolymers

Pure organic room-temperature phosphorescence(RTP) materials have attracted wide attention owing to their excellent luminescent properties and great potential in various applications. In this work, iminostilbene and its analogues are applied to realize RTP emission by copolymerizing with acrylamide. It can be concluded that the growth of alkane chain in monomers can enhance the lifetime and photoluminescence quantum yield of RTP emission, and polymers with the larger conjugated structure of the ...     

The effect of sample environment on the room-temperature phosphorescence of several polynuclear aromatic hydrocarbons

Room-temperature phosphorescence (r.t.p.) of numerous molecules has been studied with emphasis on several polynuclear aromatic hydrocarbons (PAH). The heavy atom effect has led to a significant enhancement of r.t.p. signals for the PAH studied with the trend being Tl⁺ > Ag⁺ > Pb²⁺ > Hg²⁺. The Tl⁺ also resulted in enhanced spectral features of emission bands. R.t.p. could be induced from PAH on a sodium acetate sample support as well as on filter paper. A study of the effect of different gaseous environments provided anomalous results.     

A comparative study of heavy-atom effects on the room-temperature phosphorescence of biologically important purines

Room-temperature phosphorescence (r.t.p.) of nine biologically important purines on filter paper is studied. The heavy-atom effect leads to a significant enhancement of r.t.p. signals, with the trend being Tl⁺ > Pb²⁺ ? I — ? Sm³⁺ for most purines. Absolute limits of detection range from 40 pg (purine) to 19 ng (theophylline).     

The effect of pH on the room-temperature phosphorescence properties of several purine and pyrimidine derivatives

Room-temperature phosphorescence (RTP) spectra of eleven purines and pyrimidines adsorbed on Whatman No. 40 filter paper have been determined in acidic, neutral and basic media. RTP excitation and emission wavelengths do not vary significantly with pH. For most compounds, use of basic (pH approximately 13) solutions yields stronger RTP signals than use of neutral or acidic (pH approximately 1.6) solutions. Exceptions are adenine, theobromine and theophylline, which give larger RTP signals when in neutral than in basic conditions. The existence of differences in phosphorescence quantum yields between the various ionic species as well as of specific pH-related interactions with the substrate is discussed. Absolute limits of detection, ranging between 0.4 and 38 ng for selected compounds, depend on the pH of the analyte solution.     

Oxygen sensor for the temperature range 300 to 500 K based on fluorescence quenching of indicator-treated silicone rubber membranes

A silicone rubber membrane treated with the O₂-sensitive indicator pyrene butyric acid (PBA) was used as a fluorescence sensor layer within a temperature range 300 to about 500 K. Measurements performed with a light fibre fluorescence photometer show that: first, the fluorescence quantum efficiency of PBA does not decrease more than about 20% within the range 300 – 500 K compared to that at room temperature; secondly, the oxygen sensitivity of the sensor increases significantly with temperature; thirdly, the long-term stability of the measurement at 500 K remains practically unchanged compared to that at room temperature.     

不同溶剂下制备B_2O_3/SiO_2纳米复合材料对其室温磷光的影响

本文通过对比不同溶剂制备的B2O3/SiO2纳米复合材料室温磷光光谱,并结合FTIR及XRD的表征结果,研究溶剂对该材料磷光性能的影响。结果表明,不管用何种溶剂制备B2O3/SiO2室温磷光材料,均存在两个磷光发射峰,一个是位于520-540nm之间,该发光可能是与氧化硼有关的二氧化硅杂质缺陷发光,另一个位于470-780nm处,该磷光峰推测是二氧化硅的结构缺陷发光。但是在制备过程中溶剂将影响氧化硼在二氧化硅结构中的掺杂,进而影响其发光中心的相对发光强度。     

聚(乙烯基二苯甲酮)及其共聚物的磷光光谱和磷光淬灭

本工作对聚(乙烯基二苯甲酮)及其共聚物在玻璃态(77K)时的磷光光谱进行测定.发现在相同发色团浓度条件下,聚(乙烯基二苯甲酮)有着最低的磷光强度,说明聚(乙烯基二苯甲酮)体系存在着严重的T-T湮灭过程.用降冰片二烯去淬灭聚(乙烯基二苯甲酮)及其共聚物磷光时,所得结果能较好地符合Stern-Volmer关系式,表明其间存在着能量迁移的作用。     

Reusable sensor based on functionalized carbon dots for the detection of silver nanoparticles in cosmetics via inner filter effect

We report a low cost selective analytical method based on inner filter effect (IFE) for citrate-silver nanoparticle (cit-AgNP) detection, in which fluorescent amine-derivatized carbon dots (a-CDs) act as the donor and aggregated cit-AgNPs as the energy receptor. Carbon dots (CDs) were chemically modified with ethylenediamine (EDA) moieties via amidic linkage displaying an emission band at 440 nm. The presence of cit-AgNPs produces a remarkably quenching of a-CD fluorescence via IFE, since the free amine groups at CD surface induce the aggregation of cit-AgNPs accompany by a red-shifting of their characteristic plasmon absorption wavelength, which resulted in “turn-on” of the IFE-decreased in CD fluorescence. The proposed method, which involves the use of chelating agents for removal of metal ions interferences, exhibits a good linear correlation for detection of cit-AgNPs from 1.23 × 10⁻⁵ to 6.19 × 10⁻⁵ mol L⁻¹, with limits of detection (LOD) and quantification (LOQ) of 5.17 × 10⁻⁶ and 1.72 × 10⁻⁵ mol L^−1, respectively. This method demonstrates to be efficient and selective for the determination of cit-AgNPs in complex matrices such as cosmetic creams and reveals many advantages such as low cost, reusability, high sensitivity and non time-consuming compared with other traditional methods.     

Determination of trace formaldehyde by solid substrate-room temperature phosphorescence quenching method based on the rose bengal-potassium bromate-Tween-80 system

A new method for the determination of trace formaldehyde by solid substrate-room temperature phosphorescence quenching method has been proposed. It is based on the facts that rose bengal (R) can emit intense and stable room temperature phosphorescence on the solid substrate of filter paper (SS-RTP). Potassium bromate (KBrO(3)) can oxidize R, which causes the quenching of RTP. In the presence of HCHO, it can react with KBrO(3) to form Br(2) and Br(2) can oxidize R, which causes smart quenching of RTP. The phosphorescence intensity (DeltaI(p)) is directly proportional to the concentration of HCHO. In the presence of Tween-80, the DeltaI(p) will be increased to 9.1 times higher than that without it. The linear range of this method is 0.016-1.6fgspot(-1) (corresponding concentration: 0.040-4.0 pgml(-1), 0.40 microlspot(-1)) with the detection limit of 4.5agspot(-1) (corresponding concentration: 1.1 x 10(-14) gml(-1)). The regression equation for working curve is DeltaI(p)=136.6+28.28m(HCHO)fgspot(-1) (r=0.9935, n=6). This method is sensitive, simple, rapid and has been applied to the determination of trace formaldehyde in real samples with satisfactory results. The mechanism of determination of trace formaldehyde by SS-RTP quenching method based on the rose bengal-KBrO(3)-Tween-80 system is also discussed.