Spectrophotometric and spectrofluorimetric methods for the determination of pregabalin in bulk and pharmaceutical preparation

Two new, sensitive and selective spectrofluorimetric and spectrophotometric methods have been developed for the determination of the gamma-amino-n-butyric acid derivative pregabalin (PGB) in bulk drug and capsule. Pregabalin, as a primary amine compound, reacts with 7-chloro-4-nitrobenzofurazon (NBD-Cl) which is a highly sensitive fluorogenic and chromogenic reagent used in many investigations. According to this fact, spectrophotometric and spectrofluorimetric methods for the determination of pregabalin in capsules were developed for the first time. The relation between the absorbance at 460 nm and the concentration is rectilinear over the range 0.5-7.0 microg mL(-1). The reaction product was also measured spectrofluorimetrically at 558 nm after excitation at 460 nm. The fluorescence intensity was directly proportional to the concentration over the range 40-400 ng mL(-1). The method was applied successfully to the determination of this drug in pharmaceutical dosage form. The mean recovery for the commercial capsules was 99.93% and 99.96% for spectrophotometric and spectrofluorimetric study, respectively. The suggested procedures could be used for the determination of PGB in pure and capsules being sensitive, simple and selective.     

Determination of creatine kinase activity using a co-immobilized auxiliary enzyme reactor coupled on-line with a flow injection system

Two flow injection methods (based on spectrophotometric and spectrofluorimetric detection) were developed for the determination of over-all creatine kinase activity. Despite the complexity of the reactions involved (both include three enzyme-catalysed steps), the manifold is very simple because the two auxiliary enzymes which catalyse the two-step indicator reaction are co-immobilized on controlled-pore glass. The features of the proposed methods (calibration ranges between 0.1 and 2.0 and 0.01 and 1.0 U l-1, relative standard deviation 0.93 and 0.53% for the spectrophotometric and spectrofluorimetric methods, respectively) allow the successful determination of the analyte activity in serum samples (recoveries better than 95-105% for both methods).     

Spectrophotometric and spectrofluorimetric methods for analysis of tramadol, acebutolol and dothiepin in pharmaceutical preparations

Sensitive spectrophotometric and spectrofluorimetric methods are described for the determination of tramadol, acebutolol and dothiepin (dosulepin) hydrochlorides. The two methods are based on the condensation of the cited drugs with the mixed anhydrides of malonic and acetic acids at 60 degrees C for 25-40 min. The coloured condensation products are suitable for the spectrophotometric and spectrofluorimetric determination at 329-333 and 431-434 nm (excitation at 389 nm), respectively. For the spectrophotometric method, Beer's law was obeyed from 0.5 to 2.5 microg ml(-1) for tramadol, dothiepin and 5-25 microg ml(-1) for acebutolol. Using the spectrofluorimetric method linearity ranged from 0.25 to 1.25 microg ml(-1) for tramadol, dothiepin and 1-5 microg ml(-1) for acebutolol. Mean percentage recoveries for the spectrophotometric method were 99.68+/-1.00, 99.95+/-1.11 and 99.72+/-1.01 for tramadol, acebutolol and dothiepin, respectively and for the spectrofluorimetric method, recoveries were 99.5+/-0.844, 100.32+/-0.969 and 99.82+/-1.15 for the three drugs, respectively. The optimum experimental parameters for the reaction has been studied. The validity of the described procedures was assessed. Statistical analysis of the results has been carried out revealing high accuracy and good precision. The proposed methods were successfully applied for the determination of the selected drugs in their pharmaceutical preparations with good recoveries. The procedures were accurate, simple and suitable for quality control application.     

Spectrophotometric and spectrofluorimetric methods for analysis of acyclovir and acebutolol hydrochloride

Simple and sensitive spectrophotometric and spectrofluorimetric methods are described for analysis of acyclovir and acebutolol hydrochloride. The proposed methods are based on oxidation of the selected drugs with cerium(IV) ion in acidic medium with subsequent measurement of either the decrease in absorbance at 320nm or the fluorescence intensity of the produced cerous(III) ion at 361-363nm (excitation at 250nm). Beer's law obeyed from 2 to 8, 0.25 to 2.5microgcm-1 acyclovir, 1 to 7 and 0.25 to 2.5microgml-1 acebutolol hydrochloride, using the spectrophotometric and spectrofluorimetric method, respectively. The proposed method were successfully applied for determination of the selected drugs in their pharmaceutical preparations with good recoveries.     

Net analyte signal standard addition method (NASSAM) as a novel spectrofluorimetric and spectrophotometric technique for simultaneous determination,application to assay of melatonin and pyridoxine

In this work a new modification of the standard addition method called “net analyte signal standard addition method (NASSAM)” is presented for the simultaneous spectrofluorimetric and spectrophotometric analysis. The proposed method combines the advantages of standard addition method with those of net analyte signal concept. The method can be applied for the determination of analyte in the presence of known interferents. The accuracy of the predictions against H-point standard addition method is not dependent on the shape of the analyte and interferent spectra. The method was successfully applied to simultaneous spectrofluorimetric and spectrophotometric determination of pyridoxine (PY) and melatonin (MT) in synthetic mixtures and in a pharmaceutical formulation.     

New spectrophotometric and spectrofluorimetric methods for the determination of angiotensin II receptor antagonists in tablets and plasma

Spectrophotometric and spectrofluorimetric methods for the determination of five Angiotensin II type 1 receptor antagonists in tablets and plasma have been developed and optimized. The spectrophotometric method involves the addition of a measured excess of bromate-bromide in HCl medium and subsequent estimation of the residual bromine by reacting with a fixed amount of methyl orange. The spectrofluorimetric method depends on the oxidation of the drugs with cerium(IV) and subsequent monitoring of the fluorescence of the induced cerium(III) at 365 nm with excitation at 255 nm. Both of the proposed methods were successfully applied to the determination of the investigated drugs in their pure forms and pharmaceutical preparations. Besides, the spectrofluorimetric method was applied to the determination of irbesartan and telmisartan in biological fluids with good accuracy and precision.     

Spectrophotometric and spectrofluorimetric methods for analysis of acyclovir and acebutolol hydrochloride

Simple and sensitive spectrophotometric and spectrofluorimetric methods are described for analysis of acebutolol hydrochloride. The proposed methods are based on oxidation of the selected drug with cerium(IV) ion in acidic medium with subsequent measurement of either the decrease in absorbance at 320 nm or the fluorescence intensity of the produced cerous(III) ion at 363 nm (excitation at 250 nm). Beer's law obeyed from 1.0-7.0 microg ml(-1) and 0.25-2.5 microg ml(-1) acebutolol hydrochloride, using the spectrophotometric and spectrofluorimetric method, respectively. The proposed methods were successfully applied for determination of the selected drug in its pharmaceutical preparation with good recoveries.     

4th order derivative spectrophotometric determination of quinine in soft drinks

A method is developed for the 4rd order derivative spectrophotometric determination of down to 1–6 g/ml of quinine. This method has been applied to its determination in soft drinks. Comparison are made between this method and a spectrofluorimetric method.     

Spectrophotometric and fluorimetric determination of nomifensine maleate

Three methods have been developed for the determination of nomifensine maleate alone and in capsules: a spectrophotometric, an iodine charge-transfer, and a spectrofluorimetric method. All three give linear calibration graphs, over the ranges 20-100, 1-5 and 0.1-0.5 microg/ml, respectively, with coefficients of variation of 0.8, 1.3 and 1.3%, respectively.     

Determination of palladium with thiocyanate and rhodamine b by a solvent-extraction method

Sensitive spectrophotometric and spectrofluorimetric procedures for the determination of palladium have been developed, based on solvent-extraction of the ion-pair formed between Rhodamine B and the anionic complex of Pd(II) with thiocyanate. With an organic to aqueous phase-volume ratio of 1:5, the molar absorptivity is 9.0 x 10(4) l.mole(-1).cm(-1) and the absorbance of the reagent blank is 0.026. Spectrophotometrically, palladium can be determined in the range 0.1-8.8 mug. Spectrofluorimetrically, it can be determined over the range 0.04-1.5 mug. The spectrophotometric procedure has been applied to the determination of palladium in dental alloys, organopalladium compounds and hydrogenation catalysts.     

A spectrophotometric assay for solid phase primary amino groups

A rapid, sensitive, and convenient spectrophotometric assay was developed for the measurement of amino groups on solid supports. This method is based on the reaction of amino groups of solids with an excess ofo-phthaldialdehyde (OPA) and subsequent quantitative determination of unreacted OPA by reaction with glycine. Four solids possessing variable quantities of amino groups were examined. Results indicate that about 70% of the total surface amino concentration (determined by the microKjeldahl method) are available for ligand attachment. Unlike the spectrophotometric 2,4,6-trinitrobenzenesulfonic acid method, the OPA spectrophotometric assay is more rapid, sensitive, and convenient, and unlike the spectrofluorimetric OPA, it does not require sophisticated instrumentation.     

Extraction of Scandium Nitrate and Thiocyanate Complexes Using Two-Phase Aqueous Systems and the Determination of Scandium

Two-phase aqueous systems, polyethylene glycol PEG-3000 (C₃H₇OH)–NaNO₃ (NaNO₃ + KSCN)–H₂O, are proposed for the selective extraction of scandium nitrate and thiocyanate complexes followed by the complexometric and spectrophotometric determination of scandium. Conditions for analyte separation from rare-earth and concomitant elements are optimized. The procedures are tested on samples of rare-earth metals, concentrates, and an aluminum alloy. The relative standard deviation is not more than 0.8% for complexometric determination and 4.6% for spectrophotometric determination. The time of analysis is not longer than 30 min.     

Enzymatic methods for the determination of ethanol based on linear and cyclif flow-injection systems

Linear and cyclic systems are described for the determination of ethanol (ca. 0.17–30×10^?3 M). In the linear system, the solution passes either through a minicolumn of yeast alcohol dehydrogenase (YADH) immobilized on controlled-pore glass or through minicolumns of the immobilized YADH and of yeast aldehyde dehydrogenase immobilized on cyanogen bromide-activated Sepharose-4B. The NADH formed is monitored either spectrophotometrically or spectrofluorimetrically. In the cyclic system, the solution passes through the same enzyme columns, and the NADH produced is monitored similarly before reconversion to NAD⁺ in a minicolumn of glutamate dehydrogenase immobilized on cyanogen bromie-activated Sepharose-4B in the presence of α-ketoglutarate and ammonium ions also present in the flow system. the sample throughout for both systems is ca. 40 h^?1 and 50 h^?1 for spectrophotometric and spectrofluorimetric detection, respectively. An on-line double-injection technique is described as an alternative to the cyclic system for limiting the consumption of NAD⁺.     

New sensitive fluorophores for selective DNA detection

4,7-Disubstituted benzothiadiazoles containing 1-arylethynyl and 4-methoxyphenyl groups are selective photoluminescent "light up" probes to duplex DNA with unprecedented sensibility in both spectrophotometric and spectrofluorimetric measurements.     

Normal spectrophotometric and stopped-flow spectrofluorimetric sequential injection methods for the determination of alendronic acid, an anti-osteoporosis amino-bisphosphonate drug, in pharmaceuticals

A normal spectrophotometric and a stopped-flow (SF) spectrofluorimetric method have been developed and optimized for the determination of alendronic acid (ALD) in its pharmaceutical formulations. Both methods are automated using the sequential injection analysis (SIA) principle. The spectrophotometric assay is based on the reaction of the analyte with Cu(II) ions in acidic medium to form an UV-absorbing derivative (λ_max = 240 nm). The SF spectrofluorimetric method is based on the reaction of ALD with o-phthalaldehyde (OPA) in the presence of 2-mercaptoethanol at basic medium (λ_ex = 340 nm/λ_em = 455 nm). Linear calibration curves were obtained in the range 1.0-60.0 mg l⁻¹ ALD for the UV method, and in the range 0.13-10.0 mg l⁻¹ ALD for the SF spectrofluorimetric one. The sampling rates were 60 and 30 h⁻¹, respectively. The developed assays are critically compared and their advantages are discussed. Both methods were applied to the analysis of an ALD containing pharmaceutical formulation with satisfactory accuracy and precision.     

Estimation of Performance Characteristics of an Analytical Method Using the Data Set Of The Calibration Experiment

Abstract

A model to calculate the analytical sensitivity, limit of detection, limit of determination and precision of a method of instrumental analysis through a data set obtained by calibration experiment using the statistical analysis of linear regression, is proposed. This model has been applied to spectrophotometric, spectrofluorimetric and chromatographic methods. The values obtained are independent of the instrument used and can be applied as a criterion of comparison between different methods proposed for the same analyte. Also, these characteristics have been calculated using the IUPAC suggested model and both results have been compared.     

Chemiluminescence and Spectrofluorimetric Methods for Determination of Fluoroquinolones: A Review

Fluoroquinolones are an important and extensively studied group of compounds. Newer generations of fluoroquinolones are being developed to enhance the antimicrobial spectrum and pharmacological properties of these antimicrobials. Various analytical methods including chromatographic, voltametric, titrimetric, potentiometric, spectrophotometric, and so forth have been reported for analysis of these drugs. However luminescence and spectrofluorimetric methods continue to hold much significance as they are simple, economical, and sensitive as compared to most of the other methods. This led us to review the luminescence and spectrofluorimetric methods described for the analysis of this important class of drugs either per se, in dosage forms, or in biological fluids.     

Optical chemical sensors (Micro- and Nanosystems) for analysis of liquids

A number of peculiar analytical systems applied in production of detecting elements for chemical sensors were considered, in which organic reagents are immobilized on opaque and optically transparent polymeric matrices. Fibrous non-fabricated materials filled with powdered ion exchangers (Vernadsky Institute of Geochemistry and Analytical Chemistry, Russian Academy of Sciences) and polymeric films coated with a high-purity gelatin layer (Mendeleev Russian University of Chemical Technology) were suggested as solidstate matrices. The conditions for determination of elements at MPC (maximal permissible concentration) levels were identified. Rapid, highly sensitive and selective techniques were developed for reflectance-spectroscopic determination of coexisting mercury(II), cadmium(II) and lead(II); chromium(VI), copper, and nickel; lanthanum, uranium(VI), and thorium, as well as for spectrophotometric determination of calcium, thorium, nitrite, and sulfate ions. Sensitive optical sensors suitable both for single control step and long-term monitoring of the content of the elements in water objects were proposed.     

Spectrophotometric and spectrofluorimetric methods for the determination of ramipril in its pure and dosage form

This paper describes three sensitive spectrophotometric and spectrofluorimetric methods for determination of ramipril in its pure form and pharmaceutical tablets. The first method is based on the oxidation of the drug with 1-chlorobenzotriazole reagent (CBT) in strong alkaline medium followed by measuring the absorbance at 350 nm. The method obeys Beer's law over concentration range 15-50 microg ml(-1). For the second and third, both are non-extractive methods based on the formation of ternary complex between copper (II), eosin and ramipril in the presence of methylcellulose as surfactant. Spectrophotometrically, under the optimum condition, the ternary complex showed an absorption maximum at 543 nm. The method obeys Beer's law over concentration range of 20-80 microg ml(-1). A fluorescence quenching method for the determination of ramipril by forming this ternary complex was also investigated for the propose of enhance the sensitivity of the determination. The methods are simple, sensitive, and accurate. The results obtained are reproducible with a coefficient of variation less than 2%. The proposed have been successfully applied to the assay of ramipril in tablets. The results compare favorably with official method.     

Anion-exchange separation and spectrophotometric determination of molybdenum and tungsten in silicate rocks

A combined ion-exchange spectrophotometric method has been developed for the determination of molybdenum and tungsten in silicate rocks. After the decomposition of samples with a mixture of sulphuric, nitric and hydrofluoric acids, traces of molybdenum and tungsten are separated from other elements by anion-exchange in acid sulphate media containing hydrogen peroxide. The adsorbed molybdenum and tungsten can easily be stripped from the column by elution with sodium hydroxide-sodium chloride solution. The adsorption and desorption steps provide selective concentration of molybdenum and tungsten, allowing the simultaneous spectrophotometric determination of the two metals with dithiol. Results on the quantitative determination of molybdenum and tungsten in the U.S. Geological Survey standard samples are included.