环氧丙烷的合成及反应机理

综述了环氧丙烷的合成方法,包括氯醇法、间接氧化法(Halcon法)、丙烯的H_2O_2氧化法及生物催化氧化法,探讨了Halcon过程的反应机理。概述了环氧丙烷的主要用途。参考文献26篇。     

提高聚环氧丙烷分子量的研究

本文采用丙二醇—钾、丙二醇引发环氧丙烷（PO）的阴离子聚合，同时加入络合剂，发现聚合反应速度加快，同时能有效提高聚环氧丙烷（PPO）的分子量。通过探索合成工艺条件，得到了■为4，000的线型聚环氧丙烷。     

环氧乙烷和环氧丙烷共聚物及其盐复合物的结晶与熔融

环氧乙烷和环氧丙烷共聚物及其盐复合物的结晶与熔融齐力，林云青，陈东霖（中国科学院长春应用化学研究所长春１３００２２）关键词环氧乙烷环氧丙烷共聚物，高分子固体电解质，结晶，熔融聚环氧乙烷（ＰＥＯ）及其盐复合物等￣［１，２］是一类高分子固体电解质，但ＰＥ...     

化学基波管中环氧丙烷异构反应动力学研究

环氧丙烷低温热解过程的动力学研究, 已经进行了许多工作~[1,2,3], 但在较高温度条件下的热解过程尚不清楚. 因此我们利用化学激波管及相对速度常数法, 研究了在1045—1175K 温度范围内环氧丙烷(在NO中)的热解过程, 测定了热解过程的动力学参数。     

环氧乙烷环氧丙烷开环聚合反应动力学研究

环氧乙烷和环氧丙烷由于具有较高的环张力,因而容易发生开环聚合。本文综述了环氧乙烷合环氧丙烷开环聚合反应的动力学研究进展,考察了环氧乙烷和环氧丙烷开环聚合反应的机理,分别讨论了各类催化剂体系中环氧乙烷和环氧丙烷开环聚合的动力学常数、两者的竞聚率及开环聚合产物的分子量分布,并指出了开环聚合反应动力学研究对于环氧乙烷和环氧丙烷的开环聚合研究及工业应用的重要性。     

环氧乙烷和环氧丙烷开环聚合

环氧乙烷和环氧丙烷的开环聚合产物在表面活性剂工业和聚氨酯工业得到了极为广泛的应用.本文综述了近几年来发展的用于环氧乙烷和环氧丙烷开环聚合的各类催化剂体系,分别讨论了各类催化剂体系对环氧乙烷和环氧丙烷的不同作用机制,考察了反应物结构对反应活性和选择性的影响,重点介绍了配位络合催化剂体系在环氧乙烷和环氧丙烷开环聚合反应中的应用,并指出了今后研究的方向.     

聚碳酸亚丙酯-聚醚聚氨酯的合成与性能

本文报道用CO2与环氧丙烷共聚产物聚碳酸亚丙酯和环氧丙烷均聚物来制备聚氨酯（PPCPOPU）弹性体。探讨了这类弹性体的最佳合成方法，考察了异氰酸酯基与羟基的比值；扩链交联剂用量等因素对弹性体的力学性能的影响。研究了弹性体的形态结构及其性能对配比的依赖关系。发现聚碳酸亚丙酯的耐热性因聚氨酯的形成而得到较大的改善，并发现该类弹性体具有优异的耐水性能。     

Nd(naph)3-Al(i-Bu)3催化邻苯二甲酸酐与环氧丙烷交替共聚

Ｎｄ（ｎａｐｈ）３Ａｌ（ｉＢｕ）３催化邻苯二甲酸酐与环氧丙烷交替共聚房江华黄士力（宁波师范学院化学系，宁波３１５０２０）沈之荃（浙江大学高分子科学与工程学系，杭州３１００２７）关键词环烷酸钕，交替共聚，邻苯二甲酸酐，环氧丙烷分类号Ｏ６４３／ＴＱ３...     

丙烯酶催化氧化制环氧丙烷反应产物的气相色谱分析

近年来,生物技术在石油化工中的应用引起了人们的极大兴趣。很多有机化工产品都可由生物化学方法生产。生物催化法与化学催化法相比具有反应条件温和、选泽性高等优点。在某些合成步骤比较复杂的精细化工产品的生产中,生物催化将逐步取代化学催化法。环氧丙烷是一种重要的精细化工原料。采用酶催化氧化方法从丙烯制取环氧丙烷已引起人们的广泛注意。本文选择不同担体制备的填充色谱柱,在不同的检测器上进行考察,建立了丙烯酶催化氧化制环氧丙烷及卤代醇的反应产物气相色谱分析测试方法。     

丙烯酸酯封端环氧丙烷聚醚聚氨酯与双酚A型环氧树脂共混固化体系

丙烯酸酯封端环氧丙烷聚醚聚氨酯与双酚Ａ型环氧树脂共混固化体系丁伦汉华道本黄家贤＊韩敏（南开大学化学系天津３０００７１）（天津市聚氨酯泡沫材料厂天津）关键词环氧树脂，聚环氧丙烷，共混物，制备１９９６－１１－２２收稿，１９９７－０５－１３修回国家自然科学...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.