Surface functionalization of two-photon dye-doped mesoporous silica nanoparticles with folic acid: cytotoxicity studies with HeLa and MCF-7 cancer cells

Two-photon dye-doped mesoporous silica nanoparticles (NPs) have been conjugated with folic acid (FA) in order to obtain efficient nanotools for bioimaging of cancer cells. The surface of the NPs was first functionalized with 3-aminopropyltriethoxysilane. The amine-covered NPs were subsequently reacted with an activated ester derivative of FA. Cytotoxicity studies performed with MCF7 and HeLa cancer cells demonstrate that these functionalized NPs are much less cytotoxic than the non-functionalized NPs against both cell lines. Unfortunately, the grafting of FA enables the formation of charge transfer complexes between the two-photon dye and FA which leads to quenching of the fluorescence of the NPs. Hence although these NPs cannot be used for biomaging purposes, they offer interesting potentialities if the two-photon dye used can be replaced by a two-photon fluorophore which do not interact with FA or if the interaction between the encapsulated dye and FA can be prevented by using a suitable spacer between the surface and the FA moiety.     

Effects of surfactant/water ratio and dye amount on the fluorescent silica nanoparticles

Effects of surfactant/water volume ratios and dye amounts on the properties of micelles and fluorescence silica nanoparticles were studied in microemulsions containing nonionic surfactant Triton X-100, hexanol as co-surfactant, cyclohexane as organic solvent, and metal organic dye (tris(2,2′-bipyridyl)dichlororuthenium) via fluorescence probe technique, TEM, and XPS. Fluorescence probe measurements show that the micelle microenvironment becomes stable at the surfactant/water volume ratio higher than 3.5 and the incubation time longer than 10 h. The data suggest that the silica shell, which is formed at the surfactant/water ratio of 3.5, yields an efficient protection of dye molecules against the e-beam irradiation and result in high photostability of fluorescent silica. We pioneered the localization of dye molecules on the surface of dye-doped silica and found that an increase of dye amounts, beyond a threshold, in the microemulsion cannot enhance the fluorescence intensity of dye-doped nanoparticles. These results are of significant importance for optimizing the synthesis of fluorescent nanoparticles with high photostability and low cost.     

Organically modified silica nanoparticles co-encapsulating photosensitizing drug and aggregation-enhanced two-photon absorbing fluorescent dye aggregates for two-photon photodynamic therapy

We report energy-transferring organically modified silica nanoparticles for two-photon photodynamic therapy. These nanoparticles co-encapsulate two-photon fluorescent dye nanoaggregates as an energy up-converting donor and a photosensitizing PDT drug as an acceptor. They combine two features: (i) aggregation-enhanced two-photon absorption and emission properties of a novel two-photon dye and (ii) nanoscopic fluorescence resonance energy transfer between this nanoaggregate and a photosensitizer, 2-devinyl-2-(1-hexyloxyethyl)pyropheophorbide. Stable aqueous dispersions of the co-encapsulating nanoparticles (diameter < or = 30 nm) have been prepared in the nonpolar interior of micelles by coprecipitating an organically modified silica sol with the photosensitizer and an excess amount of the two-photon dye which forms fluorescent aggregates by phase separation from the particle matrix. Using a multidisciplinary nanophotonic approach, we show: (i) indirect excitation of the photosensitizer through efficient two-photon excited intraparticle energy transfer from the dye aggregates in the intracellular environment of tumor cells and (ii) generation of singlet oxygen and in vitro cytotoxic effect in tumor cells by photosensitization under two-photon irradiation.     

Integrated wavelength-selective optical waveguides for microfluidic-based laser-induced fluorescence detection

We demonstrate the fabrication and characterization of a novel, inexpensive microchip capable of laser induced fluorescence (LIF) detection using integrated waveguides with built-in optical filters. Integrated wavelength-selective optical waveguides are fabricated by doping poly(dimethysiloxane) (PDMS) with dye molecules. Liquid-core waveguides are created within dye-doped PDMS microfluidic chips by filling channels with high refractive index liquids. Dye molecules are allowed to diffuse into the liquid core from the surrounding dye-doped PDMS. The amount of diffusion is controlled by choosing either polar (low diffusion) or apolar (high diffusion) liquid waveguide cores. The doping dye is chosen to absorb excitation light and to transmit fluorescence emitted by the sample under test. After 24 h, apolar waveguides demonstrate propagation losses of 120 dB cm(-1) (532 nm) and 4.4 dB cm(-1) (633 nm) while polar waveguides experience losses of 8.2 dB cm(-1) (532 nm) and 1.1 dB cm(-1) (633 nm) where 532 and 633 nm light represent the excitation and fluorescence wavelengths, respectively. We demonstrate the separation and detection of end-labelled DNA fragments using polar waveguides for excitation light delivery and apolar waveguides for fluorescence collection. We demonstrate that the dye-doped waveguides can provide performance comparable to a commercial dielectric filter; however, for the present choice of dye, their ultimate performance is limited by autofluorescence from the dye. Through the detection of a BK virus polymerase chain reaction (PCR) product, we demonstrate that the dye-doped PDMS system is an order of magnitude more sensitive than a similar undoped system (SNR: 138 vs. 9) without the use of any external optical filters at the detector.     

Optimization of dye-doped silica nanoparticles prepared using a reverse microemulsion method

Fluorescent labeling based on silica nanoparticles facilitates unique applications in bioanalysis and bioseparation. Dye-doped silica nanoparticles have significant advantages over single-dye labeling in signal amplification, photostability and surface modification for various biological applications. We have studied the formation of tris(2,2'-bipyridyl)dichlororuthenium(II) (Ru(bpy)) dye-doped silica nanoparticles by ammonia-catalyzed hydrolysis of tetraethyl orthosilicate (TEOS) in water-in-oil microemulsion. The fluorescence spectra, particle size, and size distribution of Ru(bpy) dye-doped silica nanoparticles were examined as a function of reactant concentrations (TEOS and ammonium hydroxide), nature of surfactant molecules, and molar ratios of water to surfactant (R) and cosurfactant to surfactant (p). The particle size and fluorescence spectra were dependent upon the type of microemulsion system chosen. The particle size was found to decrease with an increase in concentration of ammonium hydroxide and increase in water to surfactant molar ratio (R) and cosurfactant to surfactant molar ratio (p). This optimization study of the preparation of dye-doped silica nanoparticles provides a fundamental knowledge of the synthesis and optical properties of Ru(bpy) dye-doped silica nanoparticles. With this information, these nanoparticles can be easily manipulated, with regard to particle size and size distribution, and bioconjugated as needed for bioanalysis and bioseparation applications.     

Rational design of small indolic squaraine dyes with large two-photon absorption cross section

Small organic dyes with large two-photon absorption (TPA) cross sections (δ) are more desirable in many applications compared with large molecules. Herein, we proposed a facile theoretical method for the fast screening of small organic molecules as potential TPA dyes. This method is based on a theoretical analysis to the natural transition orbitals (NTOs) directly associated with the TPA transition. Experimental results on the small indolic squaraine dyes (ISD) confirmed that their TPA cross sections is strongly correlated to the delocalization degree of the NTOs of the S₂ excited states. Aided by this simple and intuitive method, we have successfully designed and synthesized a small indolic squaraine dye (ISD) with a remarkable δ value above 8000 GM at 780 nm. The ISD dye also exhibits a high singlet oxygen generation quantum yield about 0.90. The rationally designed TPA dye was successfully applied in both two-photon excited fluorescence cell imaging and in vivo cerebrovascular blood fluid tracing.     

Dual‐fluorophore Raspberry‐like Nanohybrids for Ratiometric pH Sensing

We report on the development of raspberry‐like silica structures formed by the adsorption of 8‐hydroxypyrene‐1,3,6‐trisulfonate (HPTS)@silica nanoparticles (NPs) on rhodamine B isothiocyanate (RBTIC)@silica NPs for ratiometric fluorescence‐based pH sensing. To overcome the well‐known problem of dye leaching which occurs during encapsulation of anionic HPTS dye in silica NPs, we utilized a polyelectrolyte‐assisted incorporation of the anionic HPTS. The morphological and optical characterization of the as‐synthesized dye‐doped NPs and the resulting nanohybrids were carried out. The pH‐sensitive dye, HPTS, incorporated in the HPTS‐doped silica NPs provided a pH‐dependent fluorescence response while the RBITC‐doped silica provided the reference signal for ratiometric sensing. We evaluated the effectiveness of the nanohybrids for pH sensing; the ratio of the fluorescence emission intensity at 510 nm and 583 nm at excitation wavelengths of 454 nm and 555 nm, respectively. The results showed a dynamic response in the acidic pH range. With this approach, nanohybrids containing different dyes or receptors could be developed for multifunctioning and multiplexing applications.     

Novel multiparametric approach to elucidate the surface amine-silanization reaction profile on fluorescent silica nanoparticles

This Article addresses the important issue of the characterization of surface functional groups for optical bioassay applications. We use a model system consisting of spherical dye-doped silica nanoparticles (NPs) that have been functionalized with amine groups whereby the encapsulated cyanine-based near-infrared dye fluorescence acts as a probe of the NP surface environment. This facilitates the identification of the optimum deposition parameters for the formation of a stable ordered amine monolayer and also elucidates the functionalization profile of the amine-silanization process. Specifically, we use a novel approach where the techniques of fluorescence correlation spectroscopy (FCS) and fluorescence lifetime measurement (FL) are used in conjunction with the more conventional analytical techniques of zeta potential measurement and Fourier transfer infrared spectroscopy (FTIR). The dynamics of the ordering of the amine layer in different stages of the reaction have been characterized by FTIR, FL, and FCS. The results indicate an optimum reaction time for the formation of a stable amine layer, which is optimized for further biomolecular conjugation, whereas extended reaction times lead to a disordered cross-linked layer. The results have been validated using an immunoglobulin (IgG) plate-based direct binding assay where the maximum number of IgG-conjugated aminated NPs were captured by immobilized anti-IgG antibodies for the NP sample corresponding to the optimized amine-silanization condition. Importantly, these results point to the potential of FCS and FL as useful analytical tools in diverse fields such as characterization of surface functionalization.     

Experimental and theoretical studies of the optimisation of fluorescence from near-infrared dye-doped silica nanoparticles

There is substantial interest in the development of near-infrared dye-doped nanoparticles (NPs) for a range of applications including immunocytochemistry, immunosorbent assays, flow cytometry, and DNA/protein microarray analysis. The main motivation for this work is the significant increase in NP fluorescence that may be obtained compared with a single dye label, for example Cy5. Dye-doped NPs were synthesised and a reduction in fluorescence as a function of dye concentration was correlated with the occurrence of homo-Förster resonance energy transfer (HFRET) in the NP. Using standard analytical expressions describing HFRET, we modelled the fluorescence of NPs as a function of dye loading. The results confirmed the occurrence of HFRET which arises from the small Stokes shift of near-infrared dyes and provided a simple method for predicting the optimum dye loading in NPs for maximum fluorescence. We used the inverse micelle method to prepare monodispersed silica NPs. The NPs were characterised using dynamic light scattering, UV spectroscopy, and transmission electron microscopy (TEM). The quantum efficiency of the dye inside the NPs, as a function of dye loading, was also determined. The fluorescent NPs were measured to be approximately 165 times brighter than the free dye, at an optimal loading of 2% (w/w). These experimental results were in good agreement with model predictions.

Open image in new window

Figure The change in nanoparticle fluorescence versus increased dye loading modelled using homo-Förster resonance energy transfer.

     

Synthesis and characterization of a Noble metal Enhanced Optical Nanohybrid (NEON): a high brightness detection platform based on a dye-doped silica nanoparticle

A highly bright and photostable, fluorescent nanohybrid particle is presented which consists of gold nanoparticles (GNPs) embedded in dye-doped silica in a core-shell configuration. The dye used is the near-infrared emitting 4,5-benzo-5'-(iodoacetaminomethyl)-1',3,3,3',3'-pentamethyl-1-(4-sulfobutyl) indodicarbo cyanine. The nanohybrid architecture comprises a GNP core which is separated from a layer of dye molecules by a 15 nm buffer layer and has an outer protective, undoped silica shell. Using this architecture, a brightness factor of 550 has been achieved compared to the free dye. This hybrid system, referred to as Noble metal Enhanced Optical Nanohybrid (NEON) in this paper, is the first nanohybrid construct to our knowledge which demonstrates such tunable fluorescence property. NEON has enhanced photostability compared to the free dye and compared to a control particle without GNPs. Furthermore, the NEON particle, when used as a fluorescent label in a model bioassay, shows improved performance over assays using a conventional single dye molecule label.     

Cofluorescence of dyes in nanoparticles from metal ion complexes with diketones

Nanoparticles (NPs) from diketonates of Al³⁺, Sc³⁺, In³⁺ and Ln³⁺ doped with dye molecules are synthesized. The appearance of sensitized fluorescence (cofluorescence) of dye molecules due to energy transfer from the ensemble of complexes forming NPs is revealed in aqueous solutions of these NPs. It is shown that the dye cofluorescence in NPs from Eu complexes occurs as a result of two distinct processes of energy transfer (ET) to dye molecules: from singlet levels of ligands and from Eu³⁺ ions. It is found that the efficiency of ET from Eu³⁺ ions to dyes in NPs from Eu(DBM)₃phen is one order of magnitude higher than the efficiency of ET from S₁-levels of ligands to dyes in NPs from Al complexes with the same ligands. It is shown that the excitation of dye molecules through ligands of NPs results in the enhancement of the intensity of their fluorescence by a factor of 1.5–2 orders of magnitude compared to the excitation of their own first band of absorption.     

Luminescent properties of dye-PMMA composite nanospheres

The luminescent properties of two types of dye-poly(methyl methacrylate) (PMMA) composite nanospheres were discussed and compared. Dye molecules (Ru(bpy)(3)Cl(2)) were combined with PMMA nanospheres in two strategies: embedding dye molecules during PMMA nanosphere formation (Em-PMMA NPs) and adsorbing dye molecules onto the surface of the produced PMMA nanospheres (Ad-PMMA NPs). It has been proved that the electrostatic interaction dominated the load of Ru(bpy)(3)(2+) on the PMMA matrix. The luminescence intensity of the Em-PMMA NPs was much higher than that of the Ad-PMMA NPs under same dye concentration due to different dye load distribution in two types of dye-PMMA composite nanospheres. Luminescence lifetime measurement of Ru(bpy)(3)(2+) in the Em-PMMA NPs (containing 2.20 × 10(3) Ru(bpy)(3)(2+) molecules per NP) indicates that ～60% of dye molecules loaded in inside of the PMMA matrix and ～40% located close to/on the surface of NPs. For the Ad-PMMA NPs containing same amount of dye as Em-PMMA Nps, most of dye molecules (～84%) were on the surface of NPs and only ～16% of them penetrated into the PMMA matrix. The luminescence of the Em-PMMA NPs had nearly seven fold enhancement and the excited-state lifetime had nearly five fold extension relative to a dye aqueous solution. The mechanism of luminescence enhancement was studied. The results indicate that the larger viscosity and weaker polarity of a PMMA matrix led to the luminescence enhancement of Ru(bpy)(3)(2+). These luminescent PMMA nanospheres with high stability, long lifetime and high brightness hold great the potential for being a novel biological label.     

Manipulating exciton dynamics of thermally activated delayed fluorescence materials for tuning two-photon nanotheranostics

Rational manipulation of energy utilization from excited-state radiation of theranostic agents with a donor–acceptor structure is relatively unexplored. Herein, we present an effective strategy to tune the exciton dynamics of radiative excited state decay for augmenting two-photon nanotheranostics. As a proof of concept, two thermally activated delayed fluorescence (TADF) molecules with different electron-donating segments are engineered, which possess donor–acceptor structures and strong emissions in the deep-red region with aggregation-induced emission characteristics. Molecular simulations demonstrate that change of the electron-donating sections could effectively regulate the singlet–triplet energy gap and oscillator strength, which promises efficient energy flow. A two-photon laser with great permeability is used to excite TADF NPs to perform as theranostic agents with singlet oxygen generation and fluorescence imaging. These unique performances enable the proposed TADF emitters to exhibit tailored balances between two-photon singlet oxygen generation and fluorescence emission. This result demonstrates that TADF emitters can be rationally designed as superior candidates for nanotheranostic agents by the custom controlling exciton dynamics.

Exciton dynamics can be manipulated rationally in the design of TADF materials for nanotheranostics. Regulating the ΔE_ST and f promises efficient energy flow for tailoring balances between singlet oxygen generation and fluorescence emission.     

细胞内铜离子的双光子荧光成像

基于无荧光的螺环结构与具有荧光的开环酰胺的平衡反应,本文合成了一个能在水基的缓冲溶液中选择性地识别Cu²⁺的罗丹明衍生物FD2.当在HEPES缓冲溶液中加入10当量的Cu²⁺时,FD2的单光子激发荧光和双光子激发荧光的强度均表现出明显的增强;更为重要的是,运用双光子荧光显微技术可以选择性地对活细胞内Cu²⁺进行成像.     

Hybrid materials for solid-state dye laser applications

The quest for a solid-state tunable dye laser can be satisfied by sol-gel prepared organic-inorganic hybrids. A photostability study of porous silica-Rhodamine 6G hybrids prepared via a sol-gel method is presented. The dye molecules can be incorporated into the silica matrix by forming weak or covalent bonds (hybrids of classes I and II, respectively). New class II samples and traditional class I materials prepared by the pre-doping method were synthesized. Samples were characterized by photoluminescence measurements to compare the emission properties and the photostability of the samples. The decay of the fluorescence signal as the cumulative excitation energy increases is reported and interpreted by hypothesizing that the dye molecules can be hosted in different surroundings within the porous glass matrix. The reported photoluminescence and photobleaching features indicate the class II samples as good candidates for solid-state dye lasers.     

Enhancement of Two-photon Absorption by Ce^3＋ Sensitization in Organic Dyes

The two-photon absorption(TPA)and TPA-induced frequency upconversion emission properties of the dyes 4-[P-(dicyanoethylamino)crystal]-N-methypyrdinium iodide and the complex of 4-[P-(dicyanoethylamino)crystal]-N-methypyrdinium iodide and Ce(NO3)3 were experimentally studied.It was found that the TPA cross section for the dye sensitized by Ce3 is two factors larger than that of the dye without being sensitized.A three-level system model of the dye molecules was used to analyze the enhancement of TPA by the sensitizer Ce3 ,which indicated that the sensitizer results in the increase of the transition dipole moment from the one-photon allowed excited state(1Bu)to the two-photon allowed excited state(2Ag).     

Singlet-singlet annihilation in ultraviolet matrix-assisted laser desorption/ionization studied by fluorescence spectroscopy

Laser-induced fluorescence spectroscopy was carried out on microcrystalline samples of three typical matrices under conditions of matrix-assisted laser desorption/ionization (MALDI). The emitted fluorescence intensity was determined as a function of incident laser fluence and a sublinear increase of the fluorescence intensity with laser fluence was found. A very good fit was obtained when the experimental fluorescence vs. fluence data were compared with a numerical model assuming that under typical MALDI fluence conditions a large fraction of molecules in the excited singlet state undergoes singlet-singlet annihilation. Throughout the fluence range relevant for MALDI, however, the experimental data could not be fit well to a model assuming resonant two-photon absorption as the process depopulating the singlet state. In a separate set of experiments, the singlet lifetimes of several typical crystalline MALDI matrices were determined and found to be considerably shorter than previously reported. While both singlet-singlet annihilation and resonant two-photon absorption have been discussed in the literature as candidates for pathways to primary matrix ion generation in MALDI, the data presented here suggest that singlet-singlet annihilation is the dominant mechanism for depopulating the singlet state in a matrix crystal excited at typical MALDI fluences.     

Two-photon and multi-photon excitation of naphthalene in the vapor phase,studied by excitation and fluorescence spectra

Naphthalene vapor is irradiated by μsec dye laser pulses of 150 kW peak power and a spectral bandwidth of 0.3 nm. A two-photon excitation spectrum is detected by monitoring the near UV fluorescence as a function of laser wavelength which is tuned between 570 and 610 nm. The fluorescence obtained by irradiation into the strongest band of the two-photon spectrum could be spectroscopically resolved using a bandwidth of 80 cm^?1. The spectrum exhibits vibrational structure which lies on a strong non-resolved background. From information in both spectra it can be definitely concluded that vibronic levels of B_3u × b_3u species in the lowest singlet state are predominantly excited in a two-photon process. The non-resolved background in the fluorescence spectrum is attributed to subsequent excitation of the two-photon state by a third photon. Further stepwise excitation in the strong radiation field of the laser is also taken into account.     

1,3,4-噁二唑衍生物的双光子吸收和双光子泵浦荧光

依据“推电子基-共轭中心-拉电子基-共轭中心-推电子基”的模型将电荷传输型1,3,4-噁二唑环嵌入芳香共轭体中, 通过Wittig-Horner反应合成了2种对称型强双光子吸收和双光子诱导荧光分子2,5-二[4-(2-芳基乙烯基)苯基]-1,3,4-噁二唑. 它们的氯仿溶液在锁模Nd: YAG激光器800 nm激光照射下, 发射出很强的双光子上转换荧光, 其最强荧光分别在波长507和475 nm. 采用非线性透过率法测得其双光子吸收截面分别为1.07×10^－46和6.6×10^－47 cm⁴•s•photon^－1. 这2个对称型D-π-A-π-D生色分子从激发端基到π共轭桥的有效能量传输, 对双光子吸收和双光子荧光发射能力贡献较大.     

Photophysical characterization of a highly conjugated bipyridyl-based dye synthesized by a unique two-step approach

In this article, we present a new and simple, yet efficient, two-step approach to synthesize 4,4'-bis(dibutylaminostyrylstyryl)-2,2'-bipyridine with high yield, as well as its linear and nonlinear optical characterizations in THF and toluene solutions. We show that its one- and two-photon absorption spectra are similar in both solvents. Nevertheless, the relaxation processes of this compound exhibit dependence on the solvent polarity. The one- and two-photon induced fluorescence signal of this molecule in solution reveals that its excited state is highly stabilized in THF solution rather than in toluene. Analysis of the fluorescence quantum yield, lifetime, and radiative and nonradiative decay rates are in agreement with Lippert's model for solute-solvent interactions. The optical measurements demonstrate that this dye is a promising candidate for multiphoton fluorescence imaging, optical limiting, and dye lasers.