Crystal structure and luminescence of Sr0.99Eu0.01AlSiN3

Strontium europium aluminum silicon nitride, Sr_0.99Eu_0.01AlSiN₃, was synthesized by heating a mixture of binary nitrides at 2173 K and a N₂ gas pressure of 190 MPa. Single crystals of Sr_0.99Eu_0.01AlSiN₃ approximately 30 μm were obtained. The structure was confirmed to be an isotypic structure of CaAlSiN₃ in the orthorhombic space group Cmc2₁, analyzed by single-crystal X-ray diffraction. The lattice parameters are a=9.843(3), b=5.7603(16), c=5.177(2) Å, cell volume=293.53(17) Å³. It shows an orange-red photoluminescence by 5d→4f transition of Eu²⁺ at around 610 nm under excitation ranging from ultraviolet to 525 nm. The photoluminescence intensity, temperature characteristics, and oxidative stability were comparable or superior to those of CaAlSiN₃:Eu²⁺ phosphor.     

Sol-gel deposition and luminescent properties of LaMgAl11O19:Ce/Tb phosphor films

Rare earth ions (Ce³⁺, Tb³⁺)-doped LaMgAl₁₁O₁₉ phosphor films were deposited on quartz glass substrates by Pechini sol-gel and dip coating method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), atomic force microscopy (AFM), field emission scanning electronic microscopy (FESEM), photoluminescence (PL) spectra, and lifetimes were used to characterize the resulting films. The results of XRD indicated that the magnetoplumbite structure LaMgAl₁₁O₁₉ phase can be obtained at 1200 °C on quartz glass substrates. This was further verified by the results of FT-IR and TG-DTA. AFM study showed that uniform films have an average grain size of 150 nm and a root mean square (RMS) roughness of 4 nm. The thickness of the films characterized by FESEM is about 340 nm. LaMgAl₁₁O₁₉:Ce³⁺ film showed the parity and spin allowed 5d-4f band emission of Ce³⁺ with a maximum at 350 nm. Ce³⁺, Tb³⁺-codoped LaMgAl₁₁O₁₉ films showed the band emission of Ce³⁺ and characteristic emission of Tb³⁺, namely, ⁵D_3,4-⁷F_J (J=6, 5, 4, 3) due to an efficient energy transfer from Ce³⁺ to Tb³⁺ in the host.     

UV-VUV-excited photoluminescence of RE-activated CaLaP3O10 (RE=Eu,Tb)

Monazite-type polyphosphate CaLaP₃O₁₀ was synthesized by solid-state reaction at 1000 °C and their photoluminescence of Eu³⁺ and Tb³⁺ in CaLaP₃O₁₀ under ultraviolet (UV) and vacuum-ultraviolet (VUV) excitation were evaluated for the first time. The emission spectra of CaLaP₃O₁₀:Eu³⁺showed that Eu³⁺ are in a site with inversion symmetry because the magnetic dipole transition ⁵D₀-⁷F₁ was the strongest both upon 254 and 147 nm excitation. Monitored at 621 nm the excitation spectra consisted of host absorption bands, charge transfer band of Eu-O and the intraconfiguration 4f⁶ transition of Eu³⁺. Green phosphor CaLaP₃O₁₀:Tb³⁺exhibited better color purity when excited by 147 nm than that excited by 254 nm. With monitored at 542 nm the host absorption bands of CaLaP₃O₁₀:Tb³⁺ were also observed. Besides the host absorption bands there were strong f-d and weak f-f transitions of Tb³⁺.     

Sensitization of Tb3+ luminescence with Ce3+ in LaOBr: Tb3+, Ce3+

Luminescence emission and uv-excitation properties of LaOBr: Tb³⁺, LaOBr: Ce³⁺, and LaOBr: Tb³⁺, Ce³⁺ phosphors were studied. The visible emission spectra of La_0.995Tb_0.005OBr consists of⁵D_3,4 →⁷F_3–6 transitions in the wavelength range of 410–630 nm. The excitation of the Tb³⁺ ion gives a broad 4f → 5d transition band at 254 nm and weaker4f → 4f transition lines above 300 nm. The uv-excitation and emission of La_0.995Ce_0.005OBr at 290, 315, 355 (excitation), and 440 nm (emission) originate from transitions between the 4f-ground state and the four crystal field components of the5d²D excited state. The sensitization of Tb³⁺ luminescence in LaOBr with Ce³⁺ at varying concentrations is described and discussed. With increasing Ce³⁺ concentration the ⁵D₃ →⁷F transitions of Tb³⁺ quench totally and the⁵D₄ →⁷F transitions begin to quench gradually. The excitation spectrum of the⁵D₄ →⁷F₅ transition of Tb³⁺ consists of four bands due to Tb³⁺ and Ce³⁺, of which the three Ce³⁺ bands increase in intensity and the Tb³⁺ band decreases as the Ce³⁺ concentration is increased.     

Preparation, structure and photoluminescence properties of Eu and Ce-doped SrYSi4N7

Undoped and Eu²⁺ or Ce³⁺-doped SrYSi₄N₇ were synthesized by solid-state reaction method at 1400-1660 °C under nitrogen/hydrogen atmosphere. The crystal structure was refined from the X-ray powder diffraction data by the Rietveld method. SrYSi₄N₇ and EuYSi₄N₇, being isotypic with the family of compounds MYbSi₄N₇ (M=Sr, Eu, Ba) and BaYSi₄N_7, crystallize with the hexagonal symmetry: space group P6₃mc (No. 186), Z=2, a=6.0160 (1) Å, c=9.7894 (1) Å, V=306.83(3) Å³; and a=6.0123 (1) Å, c=9.7869 (1) Å, V=306.37(1) Å³, respectively. Photoluminescence properties have been studied for Sr_1−xEu_xYSi₄N₇ (x=0-1) and SrY_1−xCe_xSi₄N₇ (x=0-0.03) at room temperature. Eu²⁺-doped SrYSi₄N₇ shows a broad yellow emission band peaking around 548-570 nm, while Ce³⁺-doped SrYSi₄N₇ exhibits a blue emission band with a maximum at about 450 nm. SrYSi₄N₇:Eu²⁺ can be very well excited by 390 nm radiation, which makes this material attractive as conversion phosphor for LED lighting applications.     

Electrospinning preparation and drug delivery properties of Eu/Tb doped mesoporous bioactive glass nanofibers

Luminescent Eu³⁺/Tb³⁺ doped mesoporous bioactive glass nanofibers (MBGNFs) with average diameter of 100-120 nm were fabricated by electrospinning method. Pluronic P123 and N-cetyltrimethylammonium bromide (CTAB) were used as co-surfactants to generate porous structure of the nanofibers. N₂ adsorption-desorption measurement reveals that the MBGNF:Eu³⁺ have a surface area of 188 m² g⁻¹, a pore volume of 0.246 cm³ g⁻¹ and average pore size of 4.17 nm, and the MBGNF:Tb³⁺ have a surface area of 171 m² g⁻¹, a pore volume of 0.186 cm³ g⁻¹ and average pore size of 3.65 nm. Photoluminescence measurements reveal that the MBGNF:Eu³⁺ show strong red emission dominated by the ⁵D₀ → ⁷F₂ transition of Eu³⁺ at 614 nm with a lifetime of 1.356 ms, and MBGNF:Tb³⁺ show strong green emission dominated by the ⁵D₄ → ⁷F₅ transition of Tb³⁺ at 544 nm with a lifetime of 1.982 ms. The biocompatibility tests on L929 fibroblast cells using MTT assay reveal low cytotoxicity of MBGNF. These luminescent nanofibers show sustained release properties for ibuprofen (IBU) in vitro. The emission intensities of Eu³⁺ in the drug delivery system vary with the released amount of IBU, thus making the drug release be easily tracked and monitored by the change of the luminescence intensity.     

Homogeneous one-dimensional structured Tb(OH)3:Eu nanorods: Hydrothermal synthesis, energy transfer, and tunable luminescence properties

Nearly monodisperse, homogeneous and well-defined one-dimensional Tb_(1−x)(OH)₃:xEu³⁺ (x=0-3 mol%) nanorods have been prepared through hydrothermal method. The size of the Tb(OH)₃:Eu³⁺ rods could be modulated from nano- to micro-scale by using different amount of ammonia solution. They present highly crystallinity in spite of the moderate reaction temperature. Under ultraviolet excitation into the f→f transition of Tb³⁺ at 382 nm, Tb(OH)₃ samples show the characteristic emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions; whereas Tb(OH)₃:Eu³⁺ samples mainly exhibit the characteristic emission of Eu³⁺ corresponding to ⁵D₀→⁷F_{1, 2, 4} transitions due to an efficient energy transfer occurs from Tb³⁺ to Eu³⁺. The increase of Eu³⁺ concentration leads to the increase of the energy transfer efficiency from Tb³⁺ to Eu³⁺. The PL colors of Tb(OH)₃:xEu³⁺ phosphors can be easily tuned from green, yellow, orange, to red by changing the doping concentration (x) of Eu³⁺.     

Synthesis, vacuum ultraviolet and near ultraviolet-excited luminescent properties of GdCaAl3O7: RE (RE=Eu, Tb)

Vacuum ultraviolet (VUV) excitation and photoluminescent (PL) properties of Eu³⁺ and Tb³⁺ ion-doped aluminate phosphors, GdCaAl₃O₇:Eu³⁺ and GdCaAl₃O₇:Tb³⁺ have been investigated. X-ray diffraction (XRD) patterns indicate that the phosphor GdCaAl₃O₇ forms without impurity phase at 900 °C. Field emission scanning electron microscopy (FE-SEM) images show that the particle size of the phosphor is less than 3 μm. Upon excitation with VUV irradiation, the phosphors show a strong emission at around 619 nm corresponding to the forced electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺, and at around 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺. The results reveal that both GdCaAl₃O₇:RE³⁺ (RE=Eu, Tb) are potential candidates as red and green phosphors, respectively, for use in plasma display panel (PDP).     

Structure and photoluminescence properties of Ce-doped novel silicon-oxynitride Ba4−zMzSi8O20−3xN2x (M=Mg, Ca, Sr)

Structural and photoluminescence properties of undoped and Ce³⁺-doped novel silicon-oxynitride phosphors of Ba_4−zM_zSi₈O_20−3xN_2x (M=Mg, Sr, Ca) are reported. Single-phase solid solutions of Ba_4−zM_zSi₈O_20−3xN_2x oxynitride were synthesized by partial substitutions of 3O²⁻→2N³⁻ and Ba→M (M=Mg, Ca, Sr) in orthorhombic Ba₂Si₄O₁₀. The influences of the type of alkaline earth ions of M, the Ce³⁺ concentration on the photoluminescence properties and thermal quenching behaviors of Ba₃MSi₈O_20−3xN_2x (M=Mg, Ca, Sr, x=0.5) were investigated. Under excitation at about 330 nm, Ba₃MSi₈O_20−3xN_2x:Ce³⁺ (x=0.5) exhibits efficient blue emission centered at 400-450 nm in the range of 350-650 nm owing to the 5d→4f transition of Ce³⁺. The emission band of Ce³⁺ shifts to long wavelength by increasing the ionic size of M due to the modification of the crystal field, as well as the Ce³⁺ concentrations due to the Stokes shift and energy transfer or reabsorption of Ce³⁺ ions. Among the silicon-oxynitride phosphors of Ba₃MSi₈O_18.5N:Ce³⁺, M=Sr_0.6Ca_0.4 possesses the best thermal stability probably related to its high onset of the absorption edge of Ce³⁺.     

Luminescence of NaGdFPO4:Ln after VUV excitation: A comparison with GdPO4:Ln (Ln=Ce, Tb)

The phosphors NaGdFPO₄:Ln³⁺ and GdPO₄:Ln³⁺ (for Ln³⁺=Ce³⁺ and Tb³⁺) were prepared by solid-state reaction technique, the VUV-vis spectroscopic properties of the phosphors were investigated, and we vividly compare the luminescence of Ce³⁺ and Tb³⁺ in the hosts. For phosphors GdPO₄:Ln³⁺, the band near 155 nm in VUV excitation spectrum is assumed to be the host-related absorption, and for NaGdFPO₄:Ln³⁺ the absorption is moved to longer wavelength, near 170 nm, showing the P-O bond covalency increased after fluoridation. The f-d transitions of Ce³⁺ and Tb³⁺ in the host lattices are assigned and corroborated, and it was found that the 5d states are with lower energy in NaGdFPO₄:Ln³⁺ than those in GdPO₄:Ln³⁺. For fluoridation of GdPO₄:Ln³⁺ to NaGdFPO₄:Ln³⁺, the energy change of Ln³⁺ (Ln=Ce, Tb) 5d states is consistent with that of host-related absorption.     

Hydrothermal synthesis and luminescent properties of LuBO3:Tb microflowers

Hexagonal vaterite-type LuBO₃:Tb³⁺ microflower-like phosphors have been successfully prepared by an efficient surfactant- and template-free hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectrometry, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-obtained phosphor samples present flowerlike agglomerates composed of nanoflakes with thickness of 40 nm and high crystallinity in spite of the moderate reaction temperature of 200 °C. The reaction mechanism has been considered as a dissolution/precipitation mechanism; the self-assembly evolution process has been proposed on homocentric layer-by-layer growth style. Under ultraviolet excitation into the 4f⁸→4f⁷5d transition of Tb³⁺ at 248 nm (or 288 nm) and low-voltage electron beam excitation, LuBO₃:Tb³⁺ samples show the characteristic green emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions with the ⁵D₄→⁷F₅ transition (542 nm) being the most prominent group, which have potential applications in fluorescent lamps and field emission displays.     

Photoluminescence of new red phosphor SrZnO2:Eu

SrZnO₂:Eu³⁺ has been synthesized by solid-state reaction and its photoluminescence in ultraviolet (UV)-vacuum ultraviolet (VUV) range was investigated. The broad bands around 254 nm are assigned to CT band of Eu³⁺-O²⁻. With the increasing of Eu³⁺ concentration, Eu³⁺ could occupy different sites, which leads to the broadening of CT band. A sharp band is observed in the region of 110-130 nm, which is related to the host absorption. The phosphors emit red luminescence centered at about 616 nm due to Eu³⁺⁵D₀→⁷F₂ both under 254 and 147 nm, but none of Eu²⁺ blue emission can be observed.     

Photoluminescence of Ce, Pr and Tb activated Sr3Ln(PO4)3 under VUV-UV excitation

The spectroscopic properties in VUV-Vis range for the eulytite structural phosphors Sr₃Gd(PO₄)₃:Ln³⁺ (Ln³⁺=Ce³⁺, Pr³⁺, Tb³⁺), Sr₃Ce(PO₄)₃, Sr₃Gd(PO₄)₃ and Sr₃Tb(PO₄)₃ were investigated. The bands near 170 nm in VUV excitation spectra are assumed to connect with the host lattices related absorption. The f-d transitions of Ce³⁺, Pr³⁺ and Tb³⁺ in the host lattices are assigned and corroborated. A convenient experiment formulation on the relationship between the lowest f-d transition energies and n value for trivalent 4fⁿ-series rare earth ions in these host lattices is applied.     

Pyrolytic synthesis and Eu→Eu reduction process of blue-emitting perovskite-type BaLiF3:Eu thin films

Perovskite-type barium lithium fluoride (BaLiF₃) was synthesized by pyrolysis of metal trifluoroacetates. The reaction temperature necessary for producing a single-phase material was found to be 600°C, which was lower than that for a conventional solid-state reaction or a melting method. Eu-doped BaLiF₃ was also prepared and characterized to examine the suitability of trifluoroacetates for precursors in synthesizing homogeneous complex metal fluoride materials. It was demonstrated that trivalent Eu³⁺, which was used as acetate for a starting material, was reduced to divalent Eu²⁺ in the pyrolysis process of BaLiF₃, as indicated by a broad blue emission due to an allowed 4f⁶5d→4f⁷ transition at 408 nm with a ultraviolet excitation at 254 nm. The concentration quenching of the blue emission occurred at 5 at% of Eu in BaLiF₃, indicating that Eu was homogeneously dispersed in the BaLiF₃ host lattice. Mechanisms of the formation and reduction process of BaLiF₃ were discussed based on pertinent chemical reactions.     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Novel powellite-based red-emitting phosphors: CaLa1−xNbMoO8:xEu for white light emitting diodes

We report the photoluminescence properties of a novel powellite-based red-emitting phosphor material: CaLa_1−xNbMoO₈:xEu³⁺ (0.01, 0.03, 0.05, 0.1) for the first time. The photoluminescence investigations indicated that CaLa_1−xNbMoO₈:xEu³⁺ emits strong red light at 615 nm originating from ⁵D₀→⁷F₂ (electric dipole transition) under excitation either into the ⁵L₀ state with 394 nm or the ⁵D₂ state with 464 nm, that correspond to the two popular emission lines from near-UV and blue LED chips, respectively. When compared with emission intensity from a CaMoO₄:Eu³⁺, the emission from CaLaNbMoO₈:Eu³⁺ showed greater intensity values under the same excitation wavelength (394 nm). The enhanced red emission is attributed to the enhanced f-f absorption of Eu³⁺. These materials could be promising red phosphors for use in generating white light in phosphor-converted white light emitting diodes (WLEDs).     

Synthesis of the complex fluoride LiBaF3 and optical spectroscopy properties of LiBaF3:M(M=Eu,Ce) through a solvothermal process

The complex fluoride LiBaF₃ and LiBaF₃:M(M=Eu, Ce) is solvothermally synthesized at 180°C and characterized by means of X-ray powder diffraction, scanning electron microscopy, thermogravimetric analysis and infrared spectroscopy. In the solvothermal process, the solvents, molar ratios of initial mixtures and reaction temperature play important roles in the formation of products. The excitation and emission spectra of the LiBaF₃:M(M=Eu,Ce) have been measured by fluorescence spectrophotometer. In the LiBaF₃:Eu emission spectra, there is one sharp line emission located at 360 nm arising from f→f transition of Eu²⁺ in the host lattice, and typical doublet 5d-4f emission of Ce³⁺ in LiBaF₃ powder is shown.     

Uniform Ln (Eu, Tb) doped NaLa(WO4)2 nanocrystals: Synthesis, characterization, and optical properties

Uniform shuttle-like Ln³⁺ (Eu³⁺, Tb³⁺) doped NaLa(WO₄)₂ nanocrystals have been solvothermally synthesized, and the size of the nanocrystals could be easily controlled by adjusting the volume ratio of ethylene glycol (EG) to water. Doped with 5 mol% Eu³⁺ and Tb³⁺ ions, the NaLa(WO₄)₂ nanocrystals showed strong red and green emissions with lifetimes of 0.8 and 1.40 ms, respectively. A high quenching concentration of 15 mol% was observed in Eu³⁺-doped NaLa(WO₄)₂ nanocrystals and 35 mol% in Tb³⁺-doped NaLa(WO₄)₂ nanocrystals. The emission intensity measurements of Eu³⁺-doped NaLa(WO₄)₂ with different sizes indicated that the emission intensity of shuttles with length of 300 nm in average was stronger than that of shuttles with length of 900 nm in average, but was weaker than that of needles with length of 4 and 9 μm in average.     

Luminescence Properties of Terbium-, Cerium-, or Europium-Doped α-Sialon Materials

New interesting luminescent α-sialon (M_(m/val+)^val+ Si_12-(m+n) Al_(m+n)OnN_(16−n)) (M=Ca, Y) materials doped with Ce, Tb, or Eu have been prepared and their luminescence properties studied. These show that Tb and Ce are in the 3+ and Eu in the 2+ state. Low-energy 4f↔5d transitions are observed as compared to the luminescence of these ions doped in oxidic host-lattices. This is partially explained by the nitrogen-rich coordination of the rare-earth ion and partially by the narrow size of the lattice site. The latter gives rise to a strong crystal-field splitting of the 5d band and a rather large Stokes shift for Ce³⁺ and Eu²⁺ (6500-7500 and 7000-8000 cm⁻¹, respectively). For (Y,Tb)-α-sialon the Tb³⁺ 4f→5d excitation band (∼260 nm) is in the low-energy host-lattice absorption band (?290 nm), giving rise to a strong absorption for 254-nm excitation, but a low quantum efficiency. The latter is due to photoionization processes or selective excitation of Tb³⁺ at the defect-rich surface, resulting in radiationless transitions. Ce- and Eu-doped Ca-α-sialon show bright long-wavelength luminescence (maxima at 515-540 and 560-580 nm for Ce and Eu, respectively) with a high quantum efficiency and high absorption for 365- and 254-nm excitation. The Eu²⁺ emission intensity and absorption increases for increasing m, which is explained by the Eu²⁺ richer α-sialon composition. The position of the Eu^2α emission does not shift with changing composition of the host-lattice (m, n values), indicating that the local coordination of the Eu²⁺ ion is hardly dependent on the matrix composition.     

Photoluminescence properties of a novel phosphor, Na3La9O3(BO3)8:RE(RE=Eu,Tb)

The new oxyborate phosphors, Na₃La₉O₃(BO₃)₈:Eu³⁺ (NLBO:Eu) and Na₃La₉O₃(BO₃)₈:Tb³⁺ (NLBO:Tb) were prepared by solid-state reactions. The photoluminescence characteristics under UV excitation were investigated. The dominated emission of Eu³⁺ corresponding to the electric dipole transition ⁵D₀→⁷F₂ is located at 613 nm and bright green luminescence of NLBO:Tb attributed to the transition ⁵D₄→⁷F₅ is centered at 544 nm. The concentration dependence of the emission intensity showed that the optimum doping concentration of Eu and Tb is 30% and 10%, respectively.