Luminescence of NaGdFPO4:Ln after VUV excitation: A comparison with GdPO4:Ln (Ln=Ce, Tb)

The phosphors NaGdFPO₄:Ln³⁺ and GdPO₄:Ln³⁺ (for Ln³⁺=Ce³⁺ and Tb³⁺) were prepared by solid-state reaction technique, the VUV-vis spectroscopic properties of the phosphors were investigated, and we vividly compare the luminescence of Ce³⁺ and Tb³⁺ in the hosts. For phosphors GdPO₄:Ln³⁺, the band near 155 nm in VUV excitation spectrum is assumed to be the host-related absorption, and for NaGdFPO₄:Ln³⁺ the absorption is moved to longer wavelength, near 170 nm, showing the P-O bond covalency increased after fluoridation. The f-d transitions of Ce³⁺ and Tb³⁺ in the host lattices are assigned and corroborated, and it was found that the 5d states are with lower energy in NaGdFPO₄:Ln³⁺ than those in GdPO₄:Ln³⁺. For fluoridation of GdPO₄:Ln³⁺ to NaGdFPO₄:Ln³⁺, the energy change of Ln³⁺ (Ln=Ce, Tb) 5d states is consistent with that of host-related absorption.     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Spatially selected synthesis of LaF3 and Er-doped CaF2 crystals in oxyfluoride glasses by laser-induced crystallization

Oxyfluoride glasses with a small amount of NiO are prepared using a conventional melt quenching technique, and the spatially selected crystallization of LaF₃ and CaF₂ crystals is induced on the glass surface by irradiations of continuous wave lasers with a wavelength of λ=1064 or 1080 nm. Dots and lines including LaF₃ crystals are patterned by heat-assisted (300 °C) laser irradiations (λ=1064 nm) with a power of P=1 W and an irradiation time of 10 s for dots and a scanning speed of S=5 μm/s for lines. Lines consisting of CaF₂ crystals are also patterned in an ErF₃-doped oxyfluoride glass by laser irradiations (λ=1080 nm) with a power of P=1.7 W and a scanning speed of S=2 μm/s, and the incorporation of Er³⁺ ions into CaF₂ crystals is confirmed from micro-photoluminescence spectrum measurements. It is proposed that the lines patterned by laser irradiations in this study are consisted of the composite of LaF₃ or CaF₂ nanocrystals and SiO₂-based oxide glassy phase. It is demonstrated that a combination of Ni²⁺-dopings and laser irradiations is effective in spatially selected local crystallizations of fluorides in oxyfluoride glasses.     

Sol-gel deposition and luminescent properties of LaMgAl11O19:Ce/Tb phosphor films

Rare earth ions (Ce³⁺, Tb³⁺)-doped LaMgAl₁₁O₁₉ phosphor films were deposited on quartz glass substrates by Pechini sol-gel and dip coating method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), atomic force microscopy (AFM), field emission scanning electronic microscopy (FESEM), photoluminescence (PL) spectra, and lifetimes were used to characterize the resulting films. The results of XRD indicated that the magnetoplumbite structure LaMgAl₁₁O₁₉ phase can be obtained at 1200 °C on quartz glass substrates. This was further verified by the results of FT-IR and TG-DTA. AFM study showed that uniform films have an average grain size of 150 nm and a root mean square (RMS) roughness of 4 nm. The thickness of the films characterized by FESEM is about 340 nm. LaMgAl₁₁O₁₉:Ce³⁺ film showed the parity and spin allowed 5d-4f band emission of Ce³⁺ with a maximum at 350 nm. Ce³⁺, Tb³⁺-codoped LaMgAl₁₁O₁₉ films showed the band emission of Ce³⁺ and characteristic emission of Tb³⁺, namely, ⁵D_3,4-⁷F_J (J=6, 5, 4, 3) due to an efficient energy transfer from Ce³⁺ to Tb³⁺ in the host.     

Photoluminescence of Ce, Pr and Tb activated Sr3Ln(PO4)3 under VUV-UV excitation

The spectroscopic properties in VUV-Vis range for the eulytite structural phosphors Sr₃Gd(PO₄)₃:Ln³⁺ (Ln³⁺=Ce³⁺, Pr³⁺, Tb³⁺), Sr₃Ce(PO₄)₃, Sr₃Gd(PO₄)₃ and Sr₃Tb(PO₄)₃ were investigated. The bands near 170 nm in VUV excitation spectra are assumed to connect with the host lattices related absorption. The f-d transitions of Ce³⁺, Pr³⁺ and Tb³⁺ in the host lattices are assigned and corroborated. A convenient experiment formulation on the relationship between the lowest f-d transition energies and n value for trivalent 4fⁿ-series rare earth ions in these host lattices is applied.     

Uniform Ln (Eu, Tb) doped NaLa(WO4)2 nanocrystals: Synthesis, characterization, and optical properties

Uniform shuttle-like Ln³⁺ (Eu³⁺, Tb³⁺) doped NaLa(WO₄)₂ nanocrystals have been solvothermally synthesized, and the size of the nanocrystals could be easily controlled by adjusting the volume ratio of ethylene glycol (EG) to water. Doped with 5 mol% Eu³⁺ and Tb³⁺ ions, the NaLa(WO₄)₂ nanocrystals showed strong red and green emissions with lifetimes of 0.8 and 1.40 ms, respectively. A high quenching concentration of 15 mol% was observed in Eu³⁺-doped NaLa(WO₄)₂ nanocrystals and 35 mol% in Tb³⁺-doped NaLa(WO₄)₂ nanocrystals. The emission intensity measurements of Eu³⁺-doped NaLa(WO₄)₂ with different sizes indicated that the emission intensity of shuttles with length of 300 nm in average was stronger than that of shuttles with length of 900 nm in average, but was weaker than that of needles with length of 4 and 9 μm in average.     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

Solvothermal synthesis and luminescent properties of monodisperse LaPO4:Ln (Ln=Eu, Ce, Tb) particles

Monodisperse rare-earth ion (Eu³⁺, Ce³⁺, Tb³⁺) doped LaPO₄ particles with oval morphology were successfully prepared through a facile solvothermal process without further heat treatment. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are well crystalline at 180 °C and assigned to the monoclinic monazite-type structure of the LaPO₄ phase. It has been shown that all the as-synthesized samples show perfectly oval morphology with narrow size distribution. The possible growth mechanism of the LaPO₄:Ln has been investigated as well. Upon excitation by ultraviolet radiation, the LaPO₄:Eu³⁺ phosphors show the characteristic ⁵D₀−⁷F_1-4 emission lines of Eu³⁺, while the LaPO₄:Ce³⁺, Tb³⁺ phosphors demonstrate the characteristic ⁵D₄−⁷F_3-6 emission lines of Tb³⁺.     

Luminescence in NaLn(SO4)2H2O: A host lattice with high-energy vibrations

The luminescence of Ce³⁺, Sm³⁺, Eu³⁺, Gd³⁺, Tb³⁺, and Dy³⁺ in NaLn(SO₄)₂H₂O (Ln = lanthanide) is reported. Only Ce³⁺, Gd³⁺, and Tb³⁺ show efficient emission. This is explained in terms of an energy-gap law. Energy transfer is studied in several codoped compositions. The mutual transfer between Gd³⁺ ions is the only one encountered with high probability. The several transfers are discussed and where possible their rates are calculated.     

Crystal, electronic structures and photoluminescence properties of rare-earth doped LiSi2N3

The crystal and electronic structures, and luminescence properties of Eu²⁺, Ce³⁺ and Tb³⁺ activated LiSi₂N₃ are reported. LiSi₂N₃ is an insulator with an indirect band gap of about 5.0 eV (experimental value ∼6.4 eV) and the Li 2s, 2p states are positioned on the top of the valence band close to the Fermi level and the bottom of the conduction band. The solubility of Eu²⁺ is significantly higher than Ce³⁺ and Tb³⁺ in LiSi₂N₃ which may be strongly related to the valence difference between Li⁺ and rare-earth ions. LiSi₂N₃:Eu²⁺ shows yellow emission at about 580 nm due to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. Double substitution is found to be the effective ways to improve the luminescence efficiency of LiSi₂N₃:Eu²⁺, especially for the partial replacement of (LiSi)⁵⁺ with (CaAl)⁵⁺, which gives red emission at 620 nm, showing highly promising applications in white LEDs. LiSi₂N₃:Ce³⁺ emits blue light at about 450 nm arising from the 5d¹→4f¹5d⁰ transition of Ce³⁺ upon excitation at 320 nm. LiSi₂N₃:Tb³⁺ gives strong green line emission with a maximum peak at about 542 nm attributed to the ⁵D₄→⁷F_J (J=3-6) transition of Tb³⁺, which is caused by highly efficient energy transfer from the LiSi₂N₃ host to the Tb³⁺ ions.     

Preparation and luminescence properties of Ce and/or Tb doped LaPO4 nanofibers and microbelts by electrospinning

Ce³⁺ and/or Tb³⁺ doped LaPO₄ nanofibers and microbelts have been prepared by a combination method of sol-gel process and electrospinning. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), low voltage cathodoluminescence (CL) and time-resolved emission spectra as well as kinetic decays were used to characterize the resulting samples. SEM and TEM results indicate the as-formed precursor fibers and belts are smooth, and the as-prepared nanofibers and microbelts consist of nanoparticles. The doped rare-earth ions show their characteristic emission under ultraviolet excitation, i.e. Ce³⁺ 5d-4f and Tb³⁺⁵D₄-⁷F_J (J=6-3) transitions, respectively. The energy transfer process from Ce³⁺ to Tb³⁺ in LaPO₄:Ce³⁺, Tb³⁺ nanofibers was further studied by the time-resolved emission spectra. Under low-voltage electron beam excitation, LaPO₄:Ce³⁺, Tb³⁺ microbelt phosphors have a higher intensity than that of nanofiber phosphors.     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca_9Y(PO4)7∶Ce~(3+),Tb~(3+)纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca_9Y(PO4)7基质中引入Ce~(3+),Tb~(3+)离子对发光性能的影响规律。研究发现因Tb~(3+)离子自身能量交叉驰豫的存在,使得单掺Tb~(3+)时,通过调节Tb~(3+)离子的浓度可以实现对发光颜色的控制。同时研究了Ce~(3+)-Tb~(3+)之间的能量传递为电多极相互作用的偶极-四极机制,Ce~(3+)-Tb~(3+)之间最大的能量传递效率为55.6%。Ca_9Y(PO4)7∶Ce~(3+),Tb~(3+)的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

Synthesis and characterization of monodisperse spherical SiO2@RE2O3 (RE=rare earth elements) and SiO2@Gd2O3:Ln (Ln=Eu, Tb, Dy, Sm, Er, Ho) particles with core-shell structure

Spherical SiO₂ particles have been coated with rare earth oxide layers by a Pechini sol-gel process, leading to the formation of core-shell structured SiO₂@RE₂O₃ (RE=rare earth elements) and SiO₂@Gd₂O₃:Ln³⁺ (Ln=Eu, Tb, Dy, Sm, Er, Ho) particles. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), photoluminescence (PL), and cathodoluminescence spectra as well as lifetimes were used to characterize the resulting SiO₂@RE₂O₃ (RE=rare earth elements) and SiO₂@Gd₂O₃:Ln³⁺ (Eu³⁺, Tb³⁺, Dy³⁺, Sm³⁺, Er³⁺, Ho³⁺) samples. The obtained core-shell phosphors have perfect spherical shape with narrow size distribution (average size ca. 380 nm), smooth surface and non-agglomeration. The thickness of shells could be easily controlled by changing the number of deposition cycles (40 nm for two deposition cycles). Under the excitation of ultraviolet, the Ln³⁺ ion mainly shows its characteristic emissions in the core-shell particles from Gd₂O₃:Ln³⁺ (Eu³⁺, Tb³⁺, Sm³⁺, Dy³⁺, Er³⁺, Ho³⁺) shells.     

Polyol-mediated solvothermal synthesis and luminescence properties of CeF3, and CeF3:Tb nanocrystals

CeF₃ and CeF₃:Tb³⁺ nanocrystals were successfully synthesized through a facile and effective polyol-mediated route with ethylene glycol (EG) as solvent. Various experimental techniques including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) spectra as well as decay dynamics were used to characterize the samples. The results indicated that the content of NH₄F and reactant concentrations were key factors in the product shape and size. Excessive NH₄F was necessary for the formation of hexagonal nanoplates. The specific morphology of product can be controlled by changing the NH₄F content and reactant concentrations. In addition, Tb³⁺ doped-CeF₃ sample shows strong green emission centered at 544 nm corresponding to the ⁵D₄-⁷F₅ transition of Tb³⁺. Due to the decrease of nonradiative decay rate, the lifetime of ⁵D₄ level of Tb³⁺ become longer gradually upon increasing the size of product.     

Fabrication and luminescent properties of the core-shell structured YNbO4:Eu/Tb@SiO2 spherical particles

The core-shell structured YNbO₄:Eu³⁺/Tb³⁺@SiO₂ particles were realized by coating the YNbO₄:Eu³⁺/Tb³⁺ phosphors onto the surface of spherical silica via a sol-gel process. The obtained materials were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform IR spectroscopy (FT-IR), photoluminescence (PL) spectra, and cathodoluminescence (CL) spectra. The results indicate that 600 °C annealed samples consist of amorphous silica core and crystalline YNbO₄:Re shell, having perfect spherical morphology with uniform size distribution. Upon excitation by UV or electron beam, these phosphors show the characteristic ⁵D₀-⁷F_1-4 emission lines of Eu³⁺ and the characteristic ⁵D₄-⁷F_3-6 emission lines of Tb³⁺. The PL intensities of Eu³⁺ can be tuned by altering the annealing temperature and the coating number of YNbO₄:Eu³⁺ layers.     

Crystal growth, transport, and magnetic properties of Ln3Co4Sn13 (Ln=La, Ce) with a perovskite-like structure

Ln₃Co₄Sn₁₃ (Ln=La, Ce) have been synthesized by flux growth and characterized by single crystal X-ray diffraction. These compounds adopt the Yb₃Rh₄Sn₁₃-type structure and crystallize in the cubic space group (No. 223) with Z=2. Lattice parameters at 298 K are , , and , for the La and Ce analogues, respectively. The crystal structure consists of an Sn-centered icosahedron at the origin of the unit cell, which shares faces with eight Co trigonal prisms and 12 Ln-centered cuboctahedra. Magnetization data at 0.1 T show paramagnetic behavior down to 1.8 K for Ce₃Co₄Sn₁₃, with per Ce³⁺, while conventional type II superconductivity appears below 2.85 K in the La compound. Electrical resistivity and specific heat data for the La compound show a corresponding sharp superconducting transition at T_c∼2.85 K. The entropy and resistivity data for Ce₃Co₄Sn₁₃ show the existence of the Kondo effect with a complicated semiconducting-like behavior in the resistivity data. In addition, a large enhanced specific heat coefficient at low T with a low magnetic transition temperature suggests a heavy-fermionic character for the Ce compound. Herein, the structure and physical properties of Ln₃Co₄Sn₁₃ (Ln=La, Ce) are discussed.     

Crystal growth, characterization and physical properties of PrNiSb3, NdNiSb3 and SmNiSb3

The crystal structures of three new intermetallic ternary compounds in the LnNiSb₃ (Ln=Pr, Nd and Sm) family have been characterized by single crystal X-ray diffraction. PrNiSb₃, NdNiSb₃ and SmNiSb₃ all crystallize in an orthorhombic space group, Pbcm (No. 57), Z=12, with , , , and ; , , , and ; and , , , and , for Ln=Pr, Nd and Sm, respectively. These compounds consist of rare-earth atoms located above and below layers of nearly square, buckled Sb nets, along with layers of highly distorted edge- and face-sharing NiSb₆ octahedra. Resistivity data indicate metallic behavior for all three compounds. Magnetization measurements show antiferromagnetic behavior with (PrNiSb₃), 4.6 K (NdNiSb₃), and 2.9 K (SmNiSb₃). Effective moments of 3.62 μ_B, 3.90 μ_B and 0.80 μ_B are found for PrNiSb₃, NdNiSb₃ and SmNiSb₃, respectively, and are consistent with Pr³⁺ (f ²), Nd³⁺ (f ³), and Sm³⁺ (f ⁴).     

Sensitization of Tb3+ luminescence with Ce3+ in LaOBr: Tb3+, Ce3+

Luminescence emission and uv-excitation properties of LaOBr: Tb³⁺, LaOBr: Ce³⁺, and LaOBr: Tb³⁺, Ce³⁺ phosphors were studied. The visible emission spectra of La_0.995Tb_0.005OBr consists of⁵D_3,4 →⁷F_3–6 transitions in the wavelength range of 410–630 nm. The excitation of the Tb³⁺ ion gives a broad 4f → 5d transition band at 254 nm and weaker4f → 4f transition lines above 300 nm. The uv-excitation and emission of La_0.995Ce_0.005OBr at 290, 315, 355 (excitation), and 440 nm (emission) originate from transitions between the 4f-ground state and the four crystal field components of the5d²D excited state. The sensitization of Tb³⁺ luminescence in LaOBr with Ce³⁺ at varying concentrations is described and discussed. With increasing Ce³⁺ concentration the ⁵D₃ →⁷F transitions of Tb³⁺ quench totally and the⁵D₄ →⁷F transitions begin to quench gradually. The excitation spectrum of the⁵D₄ →⁷F₅ transition of Tb³⁺ consists of four bands due to Tb³⁺ and Ce³⁺, of which the three Ce³⁺ bands increase in intensity and the Tb³⁺ band decreases as the Ce³⁺ concentration is increased.     

NaBaPOM4:Tb3+绿色荧光粉制备及其发光特性

采用高温固相法合成了NaBaPOM₄:Tb³⁺绿色荧光粉, 并研究了材料的发光性质. NaBaPOM₄:Tb³⁺材料呈多峰发射, 发射峰位于437、490、543、587和624 nm, 分别对应Tb³⁺的⁵D₃→⁷F₄和⁵D₄→⁷F_{J=6, 5, 4, 3}跃迁发射, 主峰为543 nm; 监测543 nm发射峰, 所得激发光谱由4f⁷5d¹宽带吸收(200-330 nm)和4f-4f 电子吸收(330-400 nm)组成, 主峰为380 nm. 研究了Tb³⁺掺杂浓度, 电荷补偿剂Li⁺、Na⁺、K⁺和Cl^-, 及敏化剂Ce³⁺对NaBaPOM₄:Tb³⁺材料发射强度的影响. 结果显示: 调节激活剂浓度、添加电荷补偿剂或敏化剂均可以在很大程度上提高材料的发射强度.     

Hydrothermal synthesis and luminescent properties of LuBO3:Tb microflowers

Hexagonal vaterite-type LuBO₃:Tb³⁺ microflower-like phosphors have been successfully prepared by an efficient surfactant- and template-free hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectrometry, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-obtained phosphor samples present flowerlike agglomerates composed of nanoflakes with thickness of 40 nm and high crystallinity in spite of the moderate reaction temperature of 200 °C. The reaction mechanism has been considered as a dissolution/precipitation mechanism; the self-assembly evolution process has been proposed on homocentric layer-by-layer growth style. Under ultraviolet excitation into the 4f⁸→4f⁷5d transition of Tb³⁺ at 248 nm (or 288 nm) and low-voltage electron beam excitation, LuBO₃:Tb³⁺ samples show the characteristic green emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions with the ⁵D₄→⁷F₅ transition (542 nm) being the most prominent group, which have potential applications in fluorescent lamps and field emission displays.