Rabi-Lorentzian profile of an atomic resonance obtained with Gaussian beams

We demonstrate that the interaction between atoms and a Gaussian beam changes the Lorentzian resonance into a so-called Rabi-Lorentzian resonance profile. The existence of such profiles is experimentally evidenced in a dark resonance situation for metastable (4) He, in the absence of any external perturbation. A topological mechanism is shown theoretically to account for the measured profiles. We observe a 3% systematic residual with respect to a pure Lorentzian profile, which could play a role in the search of high precision in the measurement of fundamental constants.     

氧和铒共注入硅的卢瑟福背散射和发光研究

将铒和氧共注人硅中,卢瑟福背散射分析表明,退火后铒的分布剖面因共注入氧的剂量而异。在高氧剂量下,退火后铒保持退火前的剖面不变,样品再结晶良好。在中等氧剂量下,退火后铒的分布剖面出现双峰。认为退火过程中形成了铒—氧复合物。复合物的形成减缓了铒的偏析和扩散,影响了铒的削面再分布。铒和氧离子注入剂量的系列实验证实了氧在Er3+发光中有重要作用。     

Low-dimensional physics of ultracold gases with bound states and the sine-Gordon model

We present 2D steady concentration profiles of confined layers of off-critical polymer blends. The layer rests on a solid substrate and has a flat free surface due to very high surface tension. The profiles correspond to non-linear steady solutions of the Cahn-Hilliard equation in a rectangular domain. The free polymer-gas interface is considered to be sharp, while the internal interfaces are diffuse. We explore the rich solution structure (including laterally structured layers, stratified layers, checkerboard structures, oblique states and droplets) as a function of mean concentration.     

Fourier-inversion and wavelet-transform methods applied to X-ray reflectometry and HRXRD profiles from complex thin-layered heterostructures

We show that X-ray scattering techniques can be used for the assessment of individual layer thicknesses inside complicated semi-conductor heterostructures dedicated to the opto-electronic domain. To this end, we propose methods to overcome two main drawbacks coming from: (1) the complexity of the X-ray profiles and, hence the difficulty to use model-dependent tools such as fitting procedures and (2) large dynamics in intensity due to numerous high diffraction superlattice peaks from superlattices which limit the use of the model-independent Fourier-inversion method.We demonstrate first the reliability of the Fourier-inversion method applied to high-resolution X-ray diffraction profiles curve from quantum well infrared photodetectors heterostructures, complementary to the model-dependent fitting tools. Then, a wavelet-transform-based procedure has been successfully used on X-ray reflectometry profiles containing intense SL Bragg peaks.     

Coupling of large aperture semiconductor lasers by gain profiling

We present results from a theoretical study of two large aperture semiconductor lasers transversely coupled through their gain profiles. We show that we can produce both in- and out-of-phase locking between the lasers and observe a period and bistability in our phase-locking with respect to both design and operating parameters. We discuss the implications of our design for high power laser arrays and compare the performance of our coupled lasers to single devices.     

Real-Time Laser Ultrasound Tomography for Profilometry of Solids

We studied the possibility of applying laser ultrasound tomography for profilometry of solids. The proposed approach provides high spatial resolution and efficiency, as well as profilometry of contaminated objects or objects submerged in liquids. The algorithms for the construction of tomograms and recognition of the profiles of studied objects using the parallel programming technology NDIVIA CUDA are proposed. A prototype of the real-time laser ultrasound profilometer was used to obtain the profiles of solid surfaces of revolution. The proposed method allows the real-time determination of the surface position for cylindrical objects with an approximation accuracy of up to 16 μm.     

Single parameter scalar variational analysis for single-mode fibers with smoothed-out and composite refractive index profiles: A comparative study

A number of single parameter variational approximations for single-mode graded-index fibers have been reported in the literature. One of these approximations was also proposed by us some time ago which describes the propagation characteristics of such fibers having power-law profile with a high degree of accuracy. Using these approximations we have computed the propagation constant and the normalized dispersion for single-mode fibers with smoothed-out and composite refractive index profiles which are of great current interest. We have shown that the single parameter approximation proposed by us earlier computes these propagation characteristics with a better degree of accuracy than all other single parameter approximations even for these special types of profiles.     

Broadband blazing with artificial dielectrics

The efficiency of conventional diffractive optical elements with échelette-type profiles drops rapidly as the illumination wavelength departs from the blaze wavelength. We use high dispersion of artificial materials to synthesize diffractive optical elements that are blazed over a broad spectral range (approximately 1 octave) or for two different wavelengths.     

Initial spring temperature profiles of the mesopause region over Fort Collins,CO, measured by the Colorado State Na temperature lidar

After its first measurement in late August, 1989, the new Na temperature lidar has been in operation during springs 1990 and 1991 at Fort Collins, CO. A total of nine nights (over 2600 profiles) of mesopause temperature measurements, each for a period longer than 4 hours, have been taken. We present these high quality initial profiles which demonstrate the effectiveness of the new two-frequency narrowband lidar technique for mesopause temperature measurements. The average temperature profiles suggest that the spring mesopause temperatures range from 168 K to 205 K. The mesopause heights are around 88 km before the midnight and around 99 km after the midnight. The nightly averaged temperature profiles in the mesopause region display considerable variability. The richness in new geophysical information obtainable with a Na temperature lidar is made evident by noting strong perturbations in a short time scale (15 min) in the data taken on March 11, 1990 and March 18, 1991.     

Infrared extinction by homogeneous particle aggregates of SiC, FeO and : Comparison of different theoretical approaches

Particle shape and aggregation have a strong influence on the spectral profiles of infrared phonon bands of solid dust grains. Calculating these effects is difficult due to the often extreme refractive index values in these bands. In this paper, we use the discrete dipole approximation (DDA) and the T-matrix method to compute the absorption band profiles for simple clusters of touching spherical grains. We invest reasonable amounts of computation time in order to reach high dipole grid resolutions and take high multipolar orders into account, respectively. The infrared phonon bands of three different refractory materials of astrophysical relevance are considered—silicon carbide, wustite and silicon dioxide. We demonstrate that even though these materials display a range of material properties and therefore different strengths of the surface resonances, a complete convergence is obtained with none of the approaches. For the DDA, we find a strong dependence of the calculated band profiles on the exact dipole distribution within the aggregates, especially in the vicinity of the contact points between their spherical constituents. By applying a recently developed method to separate the material optical constants from the geometrical parameters in the DDA approach, we are able to demonstrate that the most critical material properties are those where the real part of the refractive index is much smaller than unity.     

Vector-vortex Bessel-Gauss beams and their tightly focusing properties

We demonstrate that the amplitude of vector-vortex beams has a Bessel-Gauss (BG) distribution through a rigorous vector electromagnetic analysis. We also investigate the intensity profiles in the focal plane of vector-vortex beams that are focused by a high numerical-aperture lens obeying the Helmholtz condition. Although the intensity of a vector-vortex BG beam with a topological charge n=1 is nonzero along the axis in the focal plane, the beams with n≠1 show discrete multiple spots which can be useful for optical trapping.     

Optimization and limits of optical nonlinear measurements using imaging technique

We report on analytical calculations for a 4f coherent imaging system in presence of a phase object at the entry of the set-up. We give the results of the optimized parameters to be used in this system so as to increase the sensitivity of the measurement of the nonlinear refraction coefficient. Analytical and previously reported simulated image profiles are compared here. Our study also gives the limits of the nonlinear imaging technique with a phase object for relatively high nonlinear phase shifts.     

Slice profile improvement for a clinical MRI system

Optimal control methods have been recently introduced to improve the design of selective radio frequency pulses and several optimized selective pulses that can produce excellent slice profiles have been reported. These pulses usually require high peak rf amplitudes to implement and thus can not be widely utilized because of the limitations of the specific absorption rate and the rf power amplifier of a clinical system. We have a Siemens 1.5 T MRI clinical system. Several pulse files which consist of the bandwith matched 90° and 180° selective pulses are provided. Some of these can produce excellent slice profiles. However, they can only be used in the pulse sequences with the pulse length of 5.12 msec. The purpose of this paper is to improve the slice profiles produced by the pulse file in the pulse sequences with the shorter 2.56 msec pulse length. A pulse file optimized by the conjugate gradient method is proposed to substitute the 2.56 msec Siemens pulse file. Our experimental results confirm that the slice profiles and images are improved by the optimized pulse file with a lower peak voltage. The proposed pulse file can also be applied in other clinical MRI systems.     

The multiple quantum NMR dynamics in systems of equivalent spins with a dipolar ordered initial state

The multiple quantum (MQ) NMR dynamics in the system of equivalent spins with the dipolar ordered initial state is considered. The high symmetry of the Hamiltonian responsible for the MQ NMR dynamics (the MQ Hamiltonian) is used to develop analytic and numerical methods for the investigation of the MQ NMR dynamics in systems consisting of hundreds of spins from the “first principles.” We obtain the dependence of the intensities of the MQ NMR coherences on their orders (profiles of the MQ NMR coherences) for systems of 200–600 spins. It is shown that these profiles may be well approximated by exponential distribution functions. We also compare the MQ NMR dynamics in the systems of equivalent spins having two different initial states, the dipolar ordered state and the thermal equilibrium state in a strong external magnetic field.     

Fuzzy logic classifier design for air targets recognition based on HRRP

The paper describes a fuzzy logic classifier (FLC) to achieve the recognition for air targets. We first acquire the high range resolution profiles (HRRP) of three types of air targets from the measurements. We extract two typical features, namely, the length of the air targets and the difference between adjacent two HRRP based on HRRP from the measurements. Then we design the FLC to synthesize the two characters and identify the type of air targets. Simulation results show that our FLC can achieve the function of target recognition with a high ratio of recognition and also show a robust performance to some extent.     

Analysis of composition profiles to obtain interdiffusion coefficients in binary intermetallic compounds

Intermetallic compounds containing high concentrations of structural vacancies have made the determination of the interdiffusivity from the composition profile from a diffusion couple a confusing issue. In this paper, an exact procedure is formulated from fundamental principles. The only assumption made is the use of the Gibbs–Duhem relation. We show that the standard procedure for analysing composition profiles in diffusion couples slightly overestimates the interdiffusivity. We also show that the procedure put forward by Kim and Chang (Metall. Mater. Trans., 31A () 1519) to analyse the composition profiles in NiAl is incorrect near the stoichiometric composition where it seriously underestimates the interdiffusivity.     

An empirical study on the importance of a speed-dependent Voigt line shape model for tropospheric water vapor profile remote sensing

We use high quality ground-based solar absorption spectra measured in close coincidence with Vaisala RS92 radiosonde in situ water vapor profiles to demonstrate that a Voigt line shape model yields systematic errors in the remotely sensed tropospheric water vapor profiles. We analyse absorption signatures of 4 H₂¹⁶O and 2 HD¹⁶O bands situated between 790 and 4710 cm⁻¹. We find that applying a speed-dependent Voigt line shape model instead of a Voigt line shape model significantly improves the agreement between the water vapor profiles obtained by the radiosondes and by infrared remote-sensing in the different bands. An optimal agreement is obtained for a Γ₂ (relaxation rate for speed-dependence) of 6-21% of Γ₀ (Voigt relaxation rate), which is consistent to the values derived from laboratory experiments. Our study suggests that further extensive laboratory investigations of line shape models are a key for improving the quality of modern water vapor remote sensing products.     

On an excited state Faraday anomalous dispersion optical filter at moderate pump powers for a Brillouin-lidar receiver system

We present our recent progress towards a practical implementation of a remote sensing measurement technique of oceanic temperature profiles. Our approach combines the advantages of fiber amplifiers with the high spectral resolution of Faraday anomalous dispersion optical filters. In this paper, we focus on the edge filter characteristics of an excited state Faraday anomalous dispersion optical filter at moderate pump powers as the receiver unit for the Brillouin-lidar.     

Intensity profile distortion at the processing image plane of a focused femtosecond laser below the critical power: Analysis and counteraction

Femtosecond laser surface processing of materials allows for precise micro or sub-micrometer machining with restricted detrimental side effects. Thus, fine control of the laser intensity distribution (repeatability) in the processing plane is of outmost importance for industrial implementation. In this paper, we study the influence on non-linear effects on the machining quality. We experimentally study the profiles of cavities machined at the image plane of a focused femtosecond laser for a large set of fluences on stainless steel below the critical power. A strong distortion of the cavities is observed for high energetic levels. A beam analysis performed in the machining conditions reveals that the cavity profile follows the laser beam profile even at high fluences where the beam undergoes an increasing distortion. Numerical calculations of the laser beam distribution taking a Kerr effect into account are presented showing a good agreement with the experimental laser profile. To counteract the beam distortion at high fluences, we propose and successfully employ a robust solution consisting in geometrically forming the image processing plane before the laser focusing point. This ensures a beam profile free of distortion even at high fluences. Experimental evidence is made, showing a significant quality increase of the cavity profiles with an image plane placed before the focus point.     

Thickness and density profiles of polyelectrolyte brushes: dependence on grafting density and salt concentration

We have performed neutron reflectivity measurements on a monolayer of charged diblock copolymers in a Langmuir trough, and determined precise density profiles of the polyelectrolyte brush at different densities. We obtain profiles in good agreement with existing self-consistent field computations, both for the osmotic and the salted brush regime. We show that the osmotic brush's thickness increases with density.