Kinetic study of cytochrome P450 3A4 activity on warfarin by capillary electrophoresis with fluorescence detection

The use of capillary electrophoresis (CE) for the determination of cytochrome P450 3A4 (CYP3A4) activity with R-warfarin as a substrate was investigated. CYP3A4 activity was determined by the quantitation of the product, 10-hydroxywarfarin, based on separation by CE. The separation conditions were as follows: capillary, 80.5 cm (75 microm i.d., 60 cm effective length); 50 mM sodium phosphate buffer (pH 6.5); 23 kV (90 microA) applied voltage; fluorescence detection, excitation wavelength, 310 nm, emission wavelength, 418 nm; capillary temperature, 37 degrees C. With the developed CYP3A4 activity assay and the Lineweaver-Burk equation, the Michaelis-Menten parameters Km and Vmax for formation of 10-hydroxywarfarin from R-warfarin in the presence of CYP3A4 were calculated to be 166 +/- 12 microM and 713 +/- 14 pmol/min/nmol (or 91.4 pmol/min/mg) CYP3A4, respectively.     

Screening of drug metabolism by CE

The use of CE for rapid assessment of metabolic stability of drugs with cytochrome P450 (CYP) enzymes, based on relative rates of reduced nicotinamide adenine dinucleotide phosphate (NADPH) consumption and nicotinamide adenine dinucleotide phosphate (NADP) production, was investigated. The separation conditions were as follows: capillary, 80.5 cm (75 microm id, 72 cm effective length for UV detection, 58 cm effective length for fluorescence detection); 25 mM sodium phosphate buffer (pH 8.8); 28 kV (80 microA) applied voltage; UV, 260 nm; fluorescence detection, excitation wavelength, 310 nm, emission wavelength, 418 nm; capillary temperature, 25 degrees C. For UV detection, the incubation conditions were as follows: CYP3A4: 20 pmol/mL; NADPH: 1 mM; EDTA: 1 mM; concentration of the substrate: 5-10 times its reported literature K(m) value; temperature: 37 degrees C; incubation time: 15 min. For fluorescence detection, the concentrations were reduced to CYP3A4: 4 pmol/mL, NADPH: 20 microM, EDTA: 20 microM and substrate: 10 microM. Blank incubations were performed in the absence of substrate. Compared with the blank, significant differences were found for the consumption of NADPH and the production of NADP. The development of this assay system allows rapid assessment of metabolic stability relative to standard compounds, as well as potential identification of the major CYP involved in the metabolism. It would reduce the backlog of compounds that require LC/MS analysis, and thereby expedite the process of metabolic stability screening.     

人血清白蛋白与手性药物相互作用的毛细管电泳研究Ⅱ.药物对映体竞争结合参数的测定

 运用毛细管电泳（CE）技术,在对碱性药物Verapamil（VER）手性拆分的基础上对Verapamil与人血清白蛋白（HSA）平行体系进行了相互作用研究。通过定量HSA－VER体系中VER对映体的浓度,建立对映体对结合位点竞争的理论方程,获得了R和S型药物对映体与HSA的结合常数,其值分别为K（R）-VER=2．7×103×（±4．4×102）和K（S）-VER=8．5×102（±1.0×102）。实验证实,HSA具有手性选择性,与（R）－VER的结合强于与（S）-VER的结合,结合比随着HSA与（±）VER的浓度比而变化。     

Study of recombinant cytochrome P450 2C9 activity with diclofenac by MEKC

Cytochrome P450 2C9 (CYP2C9) is one of the most important isoforms in human liver involved in the metabolism of a large number of therapeutic agents. The aim of this paper is to demonstrate the applicability of CE for the determination of the enzymatic activity of CYP2C9 with diclofenac as a probe substrate. MEKC with SDS as a pseudostationary phase was used for this purpose. Compared to other assays, the MEKC-based method is rapid, can be automated and requires only a small quantity of enzymes and substrate. Moreover, the enzymatic reaction can be monitored with high sensitivity and repeatability even when the reaction mixture is used for the analysis without any pretreatment. The kinetic study on the given enzymatic reaction was also performed since the basic characterization of drug biotransformation generally begins with the enzyme kinetic analysis of metabolite formation. As a result, the Michaelis constant and maximum reaction velocity were evaluated, the values 3.44 +/- 0.45 microM and 19.78 +/- 0.76 nmol min(-1) nmol(-1), respectively, were in agreement with the literature data. On the other hand, a slight deviation from typical Michaelis-Menten kinetics with a weak positive cooperativity was found at diclofenac concentrations below 2 microM. The same atypical kinetic behavior of CYP2C9 was also observed by other authors.     

Evaluation of an in-capillary approach for performing quantitative cytochrome P450 activity studies

An automated in-capillary assay requiring very small quantities of reagents was developed for performing in vitro cytochrome P450 (CYP450) drug metabolism studies. The approach is based on the following: (i) hydrodynamic introduction of nanoliter volumes of substrate and enzyme solutions in the sandwich mode, within a capillary; (ii) mixing the reagents by diffusion across the interfaces between the injected solutions; (iii) collection of the capillary content at the end of the in-capillary assay; and (iv) off-line analysis of the incubation mixture by ultrahigh pressure liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS). After optimizing the injection sequence of the reagents, the in-capillary approach was applied to the quantitative determination of the kinetics of drug metabolism reactions catalyzed by three CYP450 isozymes involved in human drug metabolism: CYP1A2, CYP2D6, and CYP3A4. It was demonstrated that this in-capillary method was able to provide similar kinetic parameters for CYP450 activity (e.g., Michaelis constants and turnover values) as the classical in vitro method, with a drastic reduction of reagent consumption.     

Analysis of benzyldimethyldodecylammonium bromide in chemical disinfectants by liquid chromatography and capillary electrophoresis

Two novel analytical methodologies using capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC) were developed and compared for the determination of benzyldimethyldodecylammonium bromide (BAB) in commercial compound chemical disinfectants. The LC analysis was performed with a Kromasil C18 (200 mm x 4.6 mm, 5 microm) column and a mobile phase of A:B = 80:20 (A: acetonitrile, B: 4 mmol/L octanesulfonic sodium--0.02 mol/L acetic sodium, adjusted with acetic acid to pH 5.2) at a flow rate of 1.0 mL/min. Detection was by ultraviolet absorption at 262 nm. The CE analysis was performed in a bare fused-silica capillary with 75 microm i.d. and total length of 46.4 cm with a buffer solution of 50% acetonitrile -50 mmol/L NaH2PO4, pH 2.24. The applied voltage was 20 kV. Detection was by ultraviolet absorption at 214 nm. Under optimized conditions, the HPLC retention time and CE migration time for BAB was 9.18 and 5.08 min, respectively. Calibration curves of peak area versus concentration gave correlation coefficients of 0.9996 for HPLC and 0.9994 for CE. The detection limits for HPLC and CE were 1.6 mg/L and 0.2 mg/L, respectively. Average recoveries at three concentration levels (50, 100, 200 mg/L for HPLC: 20, 40, 100 mg/L for CE) were 99.94 +/- 1.5, 99.64 +/- 1.3 and 99.61 +/- 0.4% for HPLC and 120.47 +/- 2.6, 102.06 +/- 8.7 and 103.05 +/- 3.0% for CE, respectively. Although both methods were shown to be suitable for the determination of BAB in commercial disinfectant compounds, CE provided analysis with less solvent purchase/disposal and better column efficiency, whereas HPLC provided superior precision.     

Kinetic study of cytochrome P450 by capillary electrophoretically mediated microanalysis

An electrophoretically mediated microanalysis method for the determination of CYP3A4 activity using testosterone and nifedipine as substrates was developed. Initially, the enzymatic reaction was performed off-line and the samples were subsequently injected into the capillary by pressure. The CYP3A4 activity was determined by quantitation of the reactant cofactor, NADPH. To further optimize, speed-up and miniaturize the enzyme assay, the enzymatic reaction was performed directly in the capillary, prior to separation and quantitation of the product cofactor, NADP, employing the plug-plug mode of electrophoretically mediated microanalysis. An amplification step was introduced by means of an on-capillary incubation of 15 min, in order to accumulate enough reaction product to detect spectrophotometrically at 260 nm. This setup resulted in a fully automated assay, which can be carried out in less than 35 min. Using the Lineweaver-Burk equation, the Michaelis constants (K(m)) for the oxidation of testosterone and nifedipine by CYP3A4 were calculated to be 58.6+/-8.3 and 19.1+/-2.4 microM, respectively, which are consistent with off-line assay and previously reported values.     

Rapid and sensitive drug metabolism studies by SU-8 microchip capillary electrophoresis-electrospray ionization mass spectrometry

Monolithically integrated, polymer (SU-8) microchips comprising an electrophoretic separation unit, a sheath flow interface, and an electrospray ionization (ESI) emitter were developed to improve the speed and throughput of metabolism research. Validation of the microchip method was performed using bufuralol 1-hydroxylation via CYP450 enzymes as the model reaction. The metabolite, 1-hydroxybufuralol, was easily separated from the substrate (R(s)=0.5) with very good detection sensitivity (LOD=9.3nM), linearity (range: 50-500nM, r(2)=0.9997), and repeatability (RSD(Area)=10.3%, RSD(Migrationtime)=2.5% at 80nM concentration without internal standard). The kinetic parameters of bufuralol 1-hydroxylation determined by the microchip capillary electrophoresis (CE)-ESI/mass spectrometry (MS) method, were comparable to the values presented in literature as well as to the values determined by in-house liquid chromatography (LC)-UV. In addition to enzyme kinetics, metabolic profiling was demonstrated using authentic urine samples from healthy volunteers after intake of either tramadol or paracetamol. As a result, six metabolites of tramadol and four metabolites of paracetamol, including both phase I oxidation products and phase II conjugation products, were detected and separated from each other within 30-35s. Before analysis, the urine samples were pre-treated with on-chip, on-line liquid-phase microextraction (LPME) and the results were compared to those obtained from urine samples pre-treated with conventional C18 solid-phase extraction (SPE, off-chip cartridges). On the basis of our results, the SU-8 CE-ESI/MS microchips incorporating on-chip sample pre-treatment, injection, separation, and ESI/MS detection were proven as efficient and versatile tools for drug metabolism research.     

Detection of homocysteine by conventional and microchip capillary electrophoresis/electrochemistry

A method based on capillary electrophoresis (CE) with electrochemical (EC) detection for the determination of both total homocysteine (tHcy) and protein-bound homocysteine (pbHcy) in plasma is described. Both end-column and off-column amperometric detection were investigated. Off-column detection resulted in a more sensitive assay for the determination of homocysteine (Hcy). The detection limit for homocysteine was 500 nM using off-column EC detection and the response was linear over the range 1-100 microM. Therefore, this assay is appropriate for the quantification of Hcy over the physiological concentration ranges found in all disease states. Methodologies for the determination of tHcy and pbHcy in human plasma were investigated and optimized and the concentrations of both pbHcy and tHcy in plasma obtained from a healthy individual were determined to be 2.79+/-0.31 nuM (n = 4) and 3.37+/-0.15 microM (n = 3), respectively. The methodology was then transferred to a microchip CE-EC format and Hcy and reduced glutathione (GSH) were detected. Future work will focus on the development of ancillary methodologies to identify the other forms of Hcy in vivo.     

Silica nanoparticles for separation of biologically active amines by capillary electrophoresis with laser-induced native fluorescence detection

This paper describes the analysis of biologically active amines by capillary electrophoresis (CE) in conjunction with laser-induced native fluorescence detection. In order to simultaneously analyze amines and acids as well as to achieve high sensitivity, 10 mM formic acid solutions (pH < 4.0) containing silica nanoparticles (SiNPs) were chosen as the background electrolytes. With increasing SiNP concentration, the migration times for seven analytes decrease as a result of increase in electroosmotic flow (EOF) and decrease in their electrophoretic mobilities against EOF. A small EOF generated at pH 3.0 reveals adsorption of SiNPs on the deactivated capillary wall. The decreases in electrophoretic mobilities with increasing SiNP concentration up to 0.3x indicate the interactions between the analytes and the SiNPs. Having a great sensitivity (the limits of detection at a signal-to-noise ratio (S/N) = 3 of 0.09 nM for tryptamine (TA)), high efficiency, and excellent reproducibility (less than 2.4% of the migration times), this developed method has been applied to the analysis of urinal samples with the concentrations of 0.50 +/- 0.02 microM, 0.49 +/- 0.04 microM, and 74 +/- 2 microM for TA, 5-hydroxytryptamine, and tryptophan, respectively. The successful examples demonstrated in this study open up a possibility of using functional nanoparticles for the separation of different analytes by CE.     

Rapid determination of anastrozole in plasma by gas chromatography with electron capture detection and its application to an oral pharmacokinetic study in healthy volunteers

A rapid, sensitive and accurate capillary gas chromatographic assay with (63)Ni electron capture detection was developed for the determination of anastrozole in human plasma. It comprises a one-step liquid-liquid extraction procedure and gas chromatography on a capillary column using constant oven temperature. This method has been applied to the oral pharmacokinetic study of anastrozole in healthy Chinese male volunteers. Pharmacokinetic parameters of two anastrozole preparations were evaluated after single, oral administrations to 18 subjects at a dose of 1 mg in a single-blind cross-over trial. Plasma anastrozole concentration-time profiles were best described by a two-compartment model. After oral administrations of imported and domestic anastrozole tablets, the t(max) and C(max) were 1.52 +/- 1.04 h and 8.75 +/- 3.03 ng/mL for the former, and 1.43 +/- 1.12 h and 9.44 +/- 3.59 ng/mL for the latter; the elimination half-life was 46.0 +/- 25.2 h vs 41.2 +/- 8.8 h, and the area under the curve (AUC) was 423 +/- 114 ng h/mL vs 444 +/- 157 ng h/mL. The result indicates that the two products are bioequivalent.     

Determination of sodium benzoate by chiral ligand exchange CE based on its inhibitory activity in D-amino acid oxidase mediated oxidation of D-serine

A novel quantitative approach for the determination of sodium benzoate (SB) was proposed by the kinetic study about its competitive inhibitory efficiency to D-amino acid oxidase (DAAO) activity with a chiral ligand exchange capillary electrophoresis (CE) method, in which the Zn(II)-L-prolinamide complex was chosen as a novel chiral selector. After the optimization of buffer pH and the chiral selector concentration this chiral ligand exchange CE method was employed to determine labeled D,L-Serine with good linearity (r(2)≥0.995), efficient recovery (95.6-100.9%) and remarkable reproducibility (RSD≤1.2%). This chiral separation method was further used to observe DAAO activity through the determination of D-Serine concentration variation after being incubated with DAAO and obtain the sigmoidal inhibitory curve of SB to DAAO activity. The ascending part of this inhibitory curve was linearly fitted in a limited range for SB from 2.0 to 200 μM with an appropriate coefficient of determination (R(2)=0.990). The linearity was then validated to be a promising method for the analysis of SB with the standout merits of high selectivity and adjustable detection range. Furthermore, this proposed method was used for the pharmacokinetics study of SB.     

Characterization of the O(2)-evolving reaction catalyzed by [(terpy)(H2O)Mn(III)(O)2Mn(IV)(OH2)(terpy)](NO3)3 (terpy = 2,2':6,2"-terpyridine).

The complex [(terpy)(H(2)O)Mn(III)(O)(2)Mn(IV)(OH(2))(terpy)](NO(3))(3) (terpy = 2,2':6,2' '-terpyridine) (1)catalyzes O(2) evolution from either KHSO(5) (potassium oxone) or NaOCl. The reactions follow Michaelis-Menten kinetics where V(max) = 2420 +/- 490 mol O(2) (mol 1)(-1) hr(-1) and K(M) = 53 +/- 5 mM for oxone ([1] = 7.5 microM), and V(max) = 6.5 +/- 0.3 mol O(2) (mol 1)(-1) hr(-1) and K(M) = 39 +/- 4 mM for hypochlorite ([1] = 70 microM), with first-order kinetics observed in 1 for both oxidants. A mechanism is proposed having a preequilibrium between 1 and HSO(5-) or OCl(-), supported by the isolation and structural characterization of [(terpy)(SO(4))Mn(IV)(O)(2)Mn(IV)(O(4)S)(terpy)] (2). Isotope-labeling studies using H(2)(18)O and KHS(16)O(5) show that O(2) evolution proceeds via an intermediate that can exchange with water, where Raman spectroscopy has been used to confirm that the active oxygen of HSO(5-) is nonexchanging (t(1/2) > 1 h). The amount of label incorporated into O(2) is dependent on the relative concentrations of oxone and 1. (32)O(2):(34)O(2):(36)O(2) is 91.9 +/- 0.3:7.6 +/- 0.3:0.51 +/- 0.48, when [HSO(5-)] = 50 mM (0.5 mM 1), and 49 +/- 21:39 +/- 15:12 +/- 6 when [HSO(5-)] = 15 mM (0.75 mM 1). The rate-limiting step of O(2) evolution is proposed to be formation of a formally Mn(V)=O moiety which could then competitively react with either oxone or water/hydroxide to produce O(2). These results show that 1 serves as a functional model for photosynthetic water oxidation.     

Capillary electrophoresis of high-molecular chitosan: the natural carbohydrate biopolymer

Due to its high resolving power and diverse application range, capillary electrophoresis (CE) has been successfully applied to the analysis of carbohydrates. In this paper, a method for the determination of high-molecular chitosan (Mr 200,000) using CE is presented. We studied the optimal condition of buffer pH and type, and column type for determination of chitosan. Optimal CE performance was found when employing 100 mM triethylamine (TEA)-phosphate buffer, pH 2.0 and untreated fused-silica capillary (50 microm x 27 cm) for the chitosan analysis. Under optimum conditions, excellent linear responses were obtained in the concentration range of 1.25-20 microM, with a linear correlation coefficient of 0.9983. The standard deviations of the migration time and peak area were found to be 2.5 and 6.4%, respectively. This method could be readily applied to chitosan determination in real biological samples and commercial products.     

Fabrication and evaluation of a carbon-based dual-electrode detector for poly(dimethylsiloxane) electrophoresis chips

The first carbon-based dual-electrode detector for microchip capillary electrophoresis (CE) is described. The poly(dimethylsiloxane) (PDMS)-based microchip CE devices were constructed by reversibly sealing a PDMS layer containing separation and injection channels to another PDMS layer containing carbon fiber working electrodes. End-channel amperometric detection was employed and the performance of the chip was evaluated using catechol. The response was found to be linear between 1 and 600 microM with an experimentally determined limit of detection (LOD) of 500 nM and a sensitivity of 30 pA/microM. Collection efficiencies for catechol ranged from 36.0 to 43.7% at field strengths of 260-615 V/cm. The selectivity that can be gained with these devices is demonstrated by the first CE-based dual-electrode detection of a Cu(II) peptide complex. These devices illustrate the potential for a rugged and easily constructed microchip CE system with an integrated carbon-based detector of similar scale.     

Enzymatic methods for the determination of alpha-glycerophosphate and alpha-glycerophosphate oxidase with an automated FIA system

A procedure for the enzymatic determination of alpha-glycerophosphate (alpha-GP) has been developed, using an automated in-house FIA system, with immobilized glycerol-3-phosphate oxidase (GPO) on non-porous glass beads, following optimization of the immobilization and analytical parameters. Fabricated single bead string reactors (SBSR) were used in connection with the FIA system, following optimization of its parameters. The half-life of GPO-SBSR regarding reduction of the enzyme activity was found to be 110 days for its use in 20 triplicate measurements daily and storage at 4 degrees C in the appropriate buffer. The regression equation of the calibration graph for the determination of alpha-GP was: A(max)=(10+/-2)x10(-4)+(22 134+/-12)x10(-4) (mmol l(-1)alpha-GP). The lower limit of quantitation was 0.74 mumol l(-1)alpha-GP and the RSD of the method 0.05% (r=0.9999). The same FIA system and procedure can be also used for the determination of the GPO activity, with the alpha-GP as substrate. The regression equation for this calibration graph was: A(max)=(23+/-18)x10(-4)+(190+/-1)x10(-4) (mug ml(-1) GPO), the lower limit of quantitation was 0.782x10(-3) mg ml(-1) (0.782 ppm) GPO and the RSD of the method 0.53% (r=0.9999). Serum samples obtained from hospitalized patients were deproteinized by gel filtration and analyzed under pseudo-first order conditions, at various concentrations of alpha-GP. A kinetic study of the reduction of alpha-GP in serum versus time is given and an observed reaction rate constant k(ob)=106.5x10(-4) min(-1) was determined.     

Simultaneous capillary electrophoretic separation and detection of P(V) and As(V) As heteropoly-blue complexes

A capillary electrophoretic (CE) method was developed for the simultaneous determination of P(V) and As(V). A Mo(VI)-ascorbic acid reagent reacted with a mixture of trace amounts of P(V) and As(V) to form the corresponding heteropoly-blue complexes in 0.05 M acetate buffer (pH 3.5). When 0.05 M malonate buffer was used as a migration buffer, the peaks due to their migrations were well separated in the electropherogram, and the pre-column complex-formation reaction was applied to the simultaneous CE determination of P(V) and As(V) with direct UV detection at 220 nm. With the proposed method, the calibration curves were linear in the concentration range of 5 x 10(-7) - 1 x 10(-4) M, with a detection limit of 1 x 10(-7) M (a signal-to-noise ratio of 3). Interference from foreign ions was also discussed.     

Capillary electrophoresis to assess drug metabolism induced in vitro using single CYP450 enzymes (Supersomes): application to the chiral metabolism of mephenytoin and methadone

Capillary electrophoresis (CE) with multiwavelength absorbance detection is demonstrated to be an effective tool for the assessment of in vitro drug metabolism studies using microsomes containing single human cytochrome P450 enzymes (CYPs) expressed in baculovirus-infected insect cells (Supersomes). Mephenytoin (MEPH), dextromethorphan, diclofenac, caffeine, and methadone (MET) were successfully applied as test substrates for CYP2C19, CYP2D6*1, CYP2C9*1, CYP1A2, and CYP3A4, respectively. For each system, the CE-based assay could be shown to permit the simultaneous analysis of the parent drug and its targeted metabolite. Using a chiral micellar electrokinetic capillary chromatography assay, the aromatic hydroxylation of MEPH catalyzed by CYP2C19 could thereby be confirmed to be highly stereoselective, an aspect that is in agreement with data obtained via urinary analysis after intake of racemic MEPH by extensive metabolizer phenotypes. The MET to 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP) conversion was investigated with a chiral zone electrophoresis assay. Incubation of racemic and nonracemic MET with CYP3A4 revealed no stereoselectivity for the transformation to EDDP, whereas no EDDP formation was observed with CYP1A2. CYP2C9 and CYP2C19 provided enhanced formation of R-EDDP and CYP2D6 incubation resulted in the preferential conversion to S-EDDP. Investigations using racemic MET and human liver microsomes revealed a modest stereoselectivity with an R/S EDDP ratio < 1 which is similar to the in vivo findings in urine.     

Quantitative determination of alpha(s2)- and alpha(s1)-casein in goat's milk with different genotypes by capillary electrophoresis

A capillary electrophoresis (CE) method has been applied for the quantitative determination of alpha(s1)- and alpha(s2)-CN in goat's milk. Several analytical parameters were evaluated showing the reliability of this CE method. Coefficients of determination (R2) greater than 99% were obtained and determination limits of 1.23 and 0.98 mg/ml were achieved for alpha(s1)- and alpha(s2)-CN, respectively. The analytical parameters studied in terms of accuracy, precision and recovery were within acceptable limits. Among 18 samples of 4 different genotypes (BB, EE, BF and FF) for alpha(s1)-CN were analysed, different amounts were obtained from the genotypes.     

Protein separation and surfactant control of electroosmotic flow in poly(dimethylsiloxane)-coated capillaries and microchips

A thermally pyrolyzed poly(dimethylsiloxane) (PDMS) coating intended to prevent surface adsorption during capillary electrophoretic (CE) [Science 222 (1983) 266] separation of proteins, and to provide a substrate for surfactant adsorption for electroosmotic mobility control was prepared and evaluated. Coating fused-silica capillaries or glass microchip CE devices with a 1% solution of 100 cSt silicone oil in CH2Cl2, followed by forced N2 drying and thermal curing at 400 degrees C for 30 min produced a cross-linked PDMS layer. Addition of 0.01 to 0.02% Brij 35 to a 0.020 M phosphate buffer gave separations of lysozyme, cytochrome c, RNase, and fluorescein-labeled goat anti-human IgG Fab fragment. Respective plates/m typically obtained at 20 kV (740 V cm(-1)) were 2, 1.5, 1.25, and 9.4-10(5). In 50 mM ionic strength phosphate, 0.01% Brij 35 running buffer, the electroosmotic flow observed was about 25% of that in a bare capillary, and showed no pH dependence between pH 6.3-8.2. Addition of sodium dodecylsulfate (SDS) or cetyltrimethylammonium bromide (CTAB) to this running buffer allowed ready control of electroosmotic mobility, mu(eo). Concentrations of SDS between 0.005 to 0.1% resulted in mu(eo) ranging from 3 to 5 x 10(-4) cm2 V(-1) s(-1). Addition of 1 to 2.3 x 10(-4)% (2.7-6.3 microM) CTAB caused flow reversal. CTAB concentrations between 3.5 x 10(-4) and 0.05% (0.0014-1.37 mM) allowed control of mu(eo) between -1 x 10(-4) and -5.0 x 10(-4) cm2 V(-1) s(-1). For both surfactants the added presence of 0.01% Brij 35 provided slowly varying changes in mu(eo) with charged surfactant concentration.