Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

The Self-Association and Mixed Micellization of an Anionic Surfactant,Sodium Dodecyl Sulfate,and a Cationic Surfactant,Cetyltrimethylammonium Bromide: Conductometric,Dye Solubilization,and Surface Tension Studies

In the present study, we investigate the self-association and mixed micellization of an anionic surfactant, sodium dodecyl sulfate (SDS), and a cationic surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of SDS, CTAB, and mixed (SDS + CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), and A_min (the minimum area per surfactant molecule at the air/water interface)) of SDS, CTAB, and (SDS + CTAB) micellar/mixed micellar systems were evaluated. The thermodynamic parameters of the micellar (SDS and CTAB), and mixed micellar (SDS + CTAB) systems were evaluated.

A schematic representation of micelles and mixed micelles.     

Defining the different phases of premicellar aggregation using the photophysical changes of a surface-probing compound

Photophysical changes of a cylindrical compound undergoing twisted intramolecular charge transfer may be used as a surface probe to study the different phases of premicellar aggregate formation. The probe molecule, trans-2-[4-(dimethylamino)styryl] benzothiazole (DMASBT), attaches itself to the premicellar and the micellar aggregates of cationic, anionic, and neutral surfactants in different orientations because of its dipolar nature in the excited state. The micelle formation is preceded by a few typical rearrangements of the surfactant molecules. These events need proper inspection that can only be done by compounds that sense environmental changes by residing in the vicinity of the surface of those aggregates. Steady-state and time-resolved fluorescence spectroscopy coupled with steady-state fluorescence anisotropy measurements serve as a very useful tool to monitor premicellar aggregate formation. The dipolar interaction of DMASBT with the surface of the aggregate and its extraordinary capability to sense the polarity of the environment make it a very efficient molecule to use for the purpose.     

A surfactant type fluorescence probe for detecting micellar growth

We report on the detection of micellar growth in anionic, cationic, and catanionic surfactant systems using a novel surfactant type fluorescence probe, sodium 12-(N-dansyl)amino-dodecanate (12-DAN-ADA). The fluorescent group was incorporated in the tail of the surfactant which tethers the fluorescent group deep inside the apolar micellar cores. The fluorescence anisotropy of 12-DAN-ADA was found to be very sensitive for directly detecting the micellar growth in micelles containing oppositely charged surfactants, including cationic CTAB systems and mixed systems of oppositely charged surfactants (DEAB/SDS); in regard to the like charged SDS micellar systems, the sensitivity can be greatly enhanced by addition of a water soluble quencher which quenches the background fluorescence from the equilibrium population of free 12-DAN-ADA.     

Adsorption behavior of hydrophobin and hydrophobin/surfactant mixtures at the solid-solution interface

The adsorption of surface-active protein hydrophobin, HFBII, and HFBII/surfactant mixtures at the solid-solution interface has been studied by neutron reflectivity, NR. At the hydrophilic silicon surface, HFBII adsorbs reversibly in the form of a bilayer at the interface. HFBII adsorption dominates the coadsorption of HFBII with cationic and anionic surfactants hexadecyltrimethyl ammonium bromide, CTAB, and sodium dodecyl sulfate, SDS, at concentrations below the critical micellar concentration, cmc, of conventional cosurfactants. For surfactant concentrations above the cmc, HFBII/surfactant solution complex formation dominates and there is little HFBII adsorption. Above the cmc, CTAB replaces HFBII at the interface, but for SDS, there is no affinity for the anionic silicon surface hence there is no resultant adsorption. HFBII adsorbs onto a hydrophobic surface (established by an octadecyl trimethyl silane, OTS, layer on silicon) irreversibly as a monolayer, similar to what is observed at the air-water interface but with a different orientation at the interface. Below the cmc, SDS and CTAB have little impact upon the adsorbed layer of HFBII. For concentrations above the cmc, conventional surfactants (CTAB and SDS) displace most of the HFBII at the interface. For nonionic surfactant C(12)E(6), the pattern of adsorption is slightly different, and although some coadsorption at the interface takes place, C(12)E(6) has little impact on the HFBII adsorption.     

Spectrophotometric study of anionic azo-dye light yellow (X6G) interaction with surfactants and its micellar solubilization in cationic surfactant micelles

Solubilization and interaction of azo-dye light yellow (X6G) at/with cationic surfactants cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC) was investigated spectrophotometricaly. The effect of cationic micelles on solubilization of anionic azo dye in aqueous micellar solutions of cationic surfactants was studied at pH 7 and 25 degrees C. The binding of dye to micelles implied a bathochromic shift in dye absorption spectra that indicates dye-surfactant interaction. The results showed that the solubility of dye increased with increasing surfactant concentration, as a consequence of the association between the dye and the micelles. The binding constants, K(b), were obtained from experimental absorption spectra. By using pseudo-phase model, the partition coefficients between the bulk water and surfactant micelles, K(x), were calculated. Gibbs energies of binding and distribution of dye between the bulk water and surfactant micelles were estimated. The results show favorable solubilization of dye in CTAB micelles.     

Surface molecular imprinting on polypropylene fibers for rhodamine B selective adsorption

The interaction between silver nanoparticles (Ag NPs) of different surface charge and surfactants relevant to the laundry cycle has been investigated to understand changes in speciation, both in and during transport from the washing machine. Ag NPs were synthesized to exhibit either a positive or a negative surface charge in solution conditions relevant for the laundry cycle (pH 10 and pH 7). These particles were characterized in terms of size and surface charge and compared to commercially laser ablated Ag NPs. The surfactants included anionic sodium dodecylbenzenesulfonate (LAS), cationic dodecyltrimethylammoniumchloride (DTAC) and nonionic Berol 266 (Berol). Surfactant-Ag NP interactions were studied by means of dynamic light scattering, Raman spectroscopy, zeta potential, and Quartz Crystal Microbalance. Mixed bilayers of CTAB and LAS were formed through a co-operative adsorption process on positively charged Ag NPs with pre-adsorbed CTAB, resulting in charge reversal from positive to negative zeta potentials. Adsorption of DTAC on negatively charged synthesized Ag NPs and negatively charged commercial Ag NPs resulted in bilayer formation and charge reversal. Weak interactions were observed for nonionic Berol with all Ag NPs via hydrophobic interactions, which resulted in decreased zeta potentials for Berol concentrations above its critical micelle concentration. Differences in particle size were essentially not affected by surfactant adsorption, as the surfactant layer thicknesses did not exceed more than a few nanometers. The surfactant interaction with the Ag NP surface was shown to be reversible, an observation of particular importance for hazard and environmental risk assessments.     

Synergistic effect of mixed anionic and cationic surfactant systems on the interfacial tension of crude oil-water and enhanced oil recovery

Surfactant based enhanced oil recovery (EOR) is an interesting area of research for several petroleum researchers. In the present work, individual and mixed systems of anionic and cationic surfactants consisting of sodium dodecyl sulphate (SDS) and cetyltrimethylammonium bromide (CTAB) in different molar ratios were tested for their synergistic effect on the crude oil-water interfacial tension (IFT) and enhanced oil recovery performance. The combination of these two surfactant systems showed a higher surface activity as compared to individual surfactants. The effect of mixed surfactant systems on the IFT and critical micellar concentration (CMC) is strongly depends on molar ratios of the two surfactant. Much lower CMC values were observed in case of mixed surfactant systems prepared at different molar ratios as compared to individual surfactant systems. The lowest CMC value was found when the molar concentration of SDS was higher than the CTAB. When the individual and mixed surfacant systems were tested for EOR performance through flooding experiments, higher ultimate oil recovery was obtained from mixed surfactant flooding compared to individual surfactants. Combination of SDS and CTAB or probably other anionic-cationic surfactants show synergism with substantial ability to reduce crude oil water IFT and can be a promising EOR method.     

Adsorption behavior of hydrophobin and hydrophobin/surfactant mixtures at the air-water interface

The adsorption of the surface-active protein hydrophobin, HFBII, and the competitive adsorption of HFBII with the cationic, anionic, and nonionic surfactants hexadecyltrimethylammonium bromide, CTAB, sodium dodecyl sulfate, SDS, and hexaethylene monododecyl ether, C(12)E(6), has been studied using neutron reflectivity, NR. HFBII adsorbs strongly at the air-water interface to form a dense monolayer ～30 ? thick, with a mean area per molecule of ～400 ?(2) and a volume fraction of ～0.7, for concentrations greater than 0.01 g/L, and the adsorption is independent of the solution pH. In competition with the conventional surfactants CTAB, SDS, and C(12)E(6) at pH 7, the HFBII adsorption totally dominates the surface for surfactant concentrations less than the critical micellar concentration, cmc. Above the cmc of the conventional surfactants, HFBII is displaced by the surfactant (CTAB, SDS, or C(12)E(6)). For C(12)E(6) this displacement is only partial, and some HFBII remains at the surface for concentrations greater than the C(12)E(6) cmc. At low pH (pH 3) the patterns of adsorption for HFBII/SDS and HFBII/C(12)E(6) are different. At concentrations just below the surfactant cmc there is now mixed HFBII/surfactant adsorption for both SDS and C(12)E(6). For the HFBII/SDS mixture the structure of the adsorbed layer is more complex in the region immediately below the SDS cmc, resulting from the HFBII/SDS complex formation at the interface.     

DMABN在表面活性剂胶束水溶液中的荧光性质

研究了对二甲氨基苯甲腈(DMABN)在各种胶束水溶液中的荧光光谱性质, 发现不同胶束栅栏层区域的不同性质影响了探针的分子内扭转电荷转移(TICT)特性. 对离子型胶束, 头基电场是主要影响因素, 促进了DMABN分子TICT态的形成, 反离子解离度琢越大, 胶束溶液中的Ia/Ib越强. 在非离子表面活性剂胶束中, 聚氧乙烯链环外壳包裹的大量水使其氢键影响明显, 而很短的聚氧乙烯链还可能带来端基氢的氢键作用. 从DMABN的光物理特性看, 欲将胶束作为分散载体利用其TICT态特性, 选择反离子解离度较大的阴离子胶束(例如SDS或SDSO)较好.     

Self-motion of a camphanic acid disk on water with different types of surfactants

Control of the self-motion of a camphanic acid disk on water was investigated upon the addition of different kinds of surfactants (Triton X-100 and Brij58 as neutral surfactants, cetyltrimethylammonium bromide (CTAB) as a cationic surfactant, and sodium dodecyl sulfate (SDS) as an anionic surfactant) to the water phase. With an increase in the concentration of surfactant, continuous motion changed to no motion via intermittent motion (repetition between motion and rest), and the concentration regions of these motions were different among these surfactants. Although the concentration regions of these motions were determined by the surface tension for neutral surfactants, they were different than those for CTAB and SDS. These characteristics of self-motion are discussed in relation to the surface tension, depending on the concentration of individual surfactants, and the hydrophilic effect of the surfactants.     

THE EFFECTS OF MIXED MICELLES OF SURFACTANTS ON POLYMERIZATION OF ACRYLAMIDE

The polymerization of acrylamide in mixed micellar solutions of surfactants, initiated by NaHSO₃ has been studied at 20 and 3Q° C with time variable method of thermokinetics for 1. 5-order reaction. The results indicate that the mixed micellar systems of cationic or anionic with zwitterionic surfactants (SLS/ CTAB, SLS/ TTAB, SLS/ SDS) and cationic with nonionic surfactants (Brij 357sol; CTAB, Bri-J35/TTAB, Brij35/ DTAB) have catalytic effect on the polymerization in the order, at 20° C. SLS/ SDS SLS/ TTAB SLS/ CTAB Brij35/ CTAB at 30° C SLS/ SDS SLS/ TTAB≈ / CTAB Bri-j35/ DTAB= sBrij35/ TTAB as Brij35/ CTAB, while Brij35/ SDS mixed micellar system has inhibition. These effects are attributed to the effect of the Stern layer of mixed micelles on the step of initiator (HSOT) to form free radical.     

Restriction of Molecular Twisting on a Gold Nanoparticle Surface

To understand the photophysical properties of intramolecular charge transfer (ICT) and twisted intramolecular charge transfer (TICT) states on a gold nanoparticle (Au NP) surface, we have designed and synthesized a new coumarin molecule (C3) that exists both as ICT and TICT states in its excited state in a polar environment. On a Au NP surface, an excited C3 molecule only exists as an ICT state owing to restricted molecular rotation of a diethylamino group; as a result, no conversion from the ICT to TICT state was observed. Selection of the preferential state of a molecule with dual emitting states can be helpful for selected biological applications.     

邻苯二甲酸二甲酯胶束增溶过程的NMR研究

胶束的增溶作用，可通过X射线，紫外光谱以及核磁共振潜等进行研究.Eriksson等［‘］用NMR法研究了芳香烃在CTAB表面活性剂胶束溶液中的增溶作用.李干佐等问用NMR法研究了件二甲苯和末甲醇在SDS表面活性剂胶束溶液中的增溶作用.然而，关于既非亲油也非亲水的某些小的极性分子的     

The Viscous Properties of Anionic/Cationic and Cationic/Nonionic Mixed Surfactant Systems

The behavior of mixed cationic/anionic and cationic/nonionic surfactants solutions have been studied by viscosimetry. The systems studied were sodium dodecyl sulfate (SDS)/cetyltrimethylammonium bromide (CTAB) and CTAB/Brij (polyoxyethylene lauryl ether, n = 10 and 23) in aqueous and sodium chloride solutions. The relative viscosity of single nonionic surfactant solutions is larger than that of SDS or CTAB solutions. It increases with the number of ethylene oxide groups. In the mixed systems, viscosity deviates from ideal behavior. The deviation results from electrostatic interactions. The surfactant mixture composition affects the self-assembled microstructure and rheology. A new mixed system that forms clear micellar solution above CMC was detected. In CTAB/Brij systems, the experimental data also deviate from ideal behavior due to mixed micelle formation and electroviscous effect. This effect is less pronounced than that of SDS/CTAB system and could be suppressed by adding an electrolyte (NaCl).     

Encapsulation of curcumin in cationic micelles suppresses alkaline hydrolysis

The alkaline hydrolysis of curcumin was studied in three types of micelles composed of the cationic surfactants cetyl trimethylammonium bromide (CTAB) and dodecyl trimethylammonium bromide (DTAB) and the anionic surfactant sodium dodecyl sulfate (SDS). At pH 13, curcumin undergoes rapid degradation by alkaline hydrolysis in the SDS micellar solution. In contrast, alkaline hydrolysis of curcumin is greatly suppressed in the presence of either CTAB or DTAB micelles, with a yield of suppression close to 90%. The results from fluorescence spectroscopic studies reveal that while curcumin remains encapsulated in CTAB and DTAB micelles at pH 13, curcumin is dissociated from the SDS micelles to the aqueous phase at this pH. The absence of encapsulation and stabilization in the SDS micellar solution results in rapid hydrolysis of curcumin.     

MICELLAR CATALYSIS OF COMPOSITE REACTIONS I MICELLAR EFFECT ON THE CONSECUTIVE FIRST ORDER REACTION

The micellar catalytic model (or the consecutive first order reaction has been proposed in this paper. It was applied to the alkaline hydrolysis of dimethyl phthalate in micellar solutions of surfactants (CTAB, SDS and Triton X-100), and the alkaline hydrolysis of bis (2,4-dinitrophenyl) posphate in CTAB micellar solution. Rate constants obtained in micellar phase indicate that the two steps of alkaline hydrolysis of dimethyl phthalate are both inhibited by all of the surfactants investigated. CTAB micelle exhibits a greater catalytic effect on the alkaline hydrolysis of bis (2, 4-dinitrophenyl) phosphate. this may be arised from the local concentration effect of hydroxide ion in CTAB micellar phase. Nevertheless. the second order rate constant of bis-(2, 4-dinitrophenyl) phosphate in the micellar phase is smaller than that in the bulk phase.     

Organization of amphiphiles: XII. Evidence in favor of formation of hydrophobic complexes in aqueous solution

The effects of nonionic surfactants OP-10 and OP-30 (polyoxyethylated octyl phenols with 10 and 30 oxyethylene groups, respectively) in surfactant mixtures with ionic surfactants hexadecyltrimethylammonium bromide (CTAB) and sodium dodecyl sulphate (SDS) have been investigated by a conductometric method in conjunction with fluorescence, surface tension, zeta potential, and DLS measurements. The interactions are found to be antagonistic in nature for each of the systems; i.e., micellization of CTAB as well as SDS is hindered on addition of the nonionic surfactants. The antagonism is found to be more prominent in the presence of OP-10 compared to that of OP-30. Two types of mechanistic paths, path A operating below the critical micellar concentration and path B operating beyond the critical micellar concentration of nonionic surfactants, have been suggested. In path A, the retardation in micellization has been attributed to a decrease in monomeric concentration of the ionic surfactants from solution as a result of the formation of a hydrophobic complex between nonionic and ionic surfactants. In path B, the decrease in monomer concentration is due to the solubilization of the ionic surfactant in micelles of the nonionic surfactants in a 1:1 stoichiometric ratio. A theoretical treatment to the interaction in each ionic-nonionic pair yields a positive value of the interaction parameter supporting the concept of antagonism. The formation of the hydrophobic complex is supported by fluorescence and surface tension measurements. A schematic representation of the stabilization of these hydrophobic complexes has been suggested. The association of ionic surfactants by nonionic micelles is suggested by zeta potential and DLS studies.     

Studies on the Interaction of Surfactants with Cationic Dye by Absorption Spectroscopy

The interaction of methyl violet, a cationic dye, with various surfactants, viz. anionic (SDS), nonionic (Triton X-100), and cationic (CTAB), has been investigated spectrophotometrically in submicellar and micellar concentration range. While in the submicellar concentration region of SDS the higher aggregates of the dye are found, in the micellar concentration region the monomer of the dye predominates. With nonionic surfactant the dye is solubilized primarily as the monomer. CTAB produces no perturbation to the visible spectra of the dye. In the presence of strong electrolytes such as NaNO(3) and NaCl the dye aggregates are formed at a much lower SDS concentrations. Copyright 2000 Academic Press.     

TIME-RESOLVED SPECTROSCOPIC STUDIES ON PHOTOPHYSICAL PROPERTIES OF BENOXAPROFEN IN MICELLAR SOLUTIONS: AN INTRAMICELLAR FLUORESCENCE QUENCHING

The micellar dependencies of the photophysical properties of benoxaprofen (BXP), a 2-phenyl benzoxazole derivative, have been investigated using fluorescence spectroscopy and laser flash photolysis techniques. The fluorescence of BXP in aqueous solution has been observed to be remarkably quenched upon addition of a surfactant, cetyltrimethyl ammonium bromide (CTAB) or Triton X-100, in contrast to its enhancement in sodium dodecyl sulfate (SDS) micellar solution. Time-resolved fluorescence measurements show that the fluorescence decays biexponentially in the micellar solution, indicating the relaxation of micellar environments surrounding the excited BXP. The major component of fluorescence lifetimes in CTAB or Triton X-100 micellar phase is even shorter (330–427ps) than in SDS micellar phase (731 ps). The nonradiative decay constants are significantly larger (ca 3.0 times 10⁹ s^?1) in the CTAB or Triton X-100 micellar phase than in SDS micelles by a factor of ca 10. The major nonradiative decay is interpreted to be the internal conversion due to nuclear geometric change of BXP in the first excited singlet state. This is consistent with the observation that the quantum yields of intersystem crossing are very low (less than 0.01) in the micellar solutions as determined by the laser flash photolysis technique. The laser-induced transient absorption spectrum of BXP in CTAB or Triton X-100 micellar solution shows that the decay kinetics of the transients in CTAB or Triton X-100 are significantly different from first order kinetics in SDS.