Ion-exchange properties of imidazolium-grafted SBA-15 toward AuCl4(-) anions and their conversion into supported gold nanoparticles

Imidazolium groups were successfully prepared and grafted on the surface of SBA-15 mesoporous silica. The ion-exchange properties of the functionalized porous solid (SBA-15/R(+)Cl(-)) toward AuCl(4)(-) anions were evaluated through an ion-exchange isotherm. The calculated values of the equilibrium constant (log β = 4.47) and the effective ion-exchange capacity (t(Q) = 0.79 mmol g(-1)) indicate that the AuCl(4)(-) species can be loaded and strongly retained on the functionalized surface as counterions of the imidazolium groups. Subsequently, solids containing different amounts of AuCl(4)(-) ions were submitted to a chemical reduction process with NaBH(4), converting the anionic gold species into supported gold nanoparticles. The plasmon resonance bands, the X-ray diffraction patterns, and transmission electron microscopy images of the supported gold nanoparticles before and after thermal treatment at 973 K indicate that the metal nanostructures are highly dispersed and stabilized by the host environment.     

Composition-controlled synthesis of bimetallic gold-silver nanoparticles

This paper reports findings of an investigation of the synthesis of monolayer-capped binary gold-silver (AuAg) bimetallic nanoparticles that is aimed at understanding the control factors governing the formation of the bimetallic compositions. The synthesis of alkanethiolate-capped AuAg nanoparticles was carried out using two related synthetic protocols using aqueous sodium borohydride as a reducing agent. One involves a two-phase reduction of AuCl(4)(-), which is dissolved in organic solution, and Ag(+), which is dissolved in aqueous solution. The other protocol involves a two-phase reduction of AuCl(4)(-) and AgBr(2)(-), both of which are dissolved in the same organic solution. AuAg nanoparticles of 2-3 nm core sizes with different compositions in the range of 0-100% Au have been synthesized. The two synthetic routes were compared in terms of bimetallic composition and size properties. Our new findings have allowed us to establish the correlation between synthetic feeding of metals and metal compositions in the bimetallic nanoparticles, which have important implications to the exploration of gold-based bimetallic nanoparticles for constructing sensing and catalytic nanomaterials.     

Formation of gold nanoparticles catalyzed by platinum nanoparticles: assessment of the catalytic mechanism

The understanding of how the formation of metal nanoparticles in aqueous solutions is influenced by the presence of presynthesized nanoparticles is important for precise control over size, shape, and composition of nanoparticles. New insights into the catalytic mechanism of Pt nanoparticles are gained by studying the formation of gold nanoparticles from the reduction of AuCl(4)(-) in aqueous solution in the presence of presynthesized Pt nanoparticles as a model system. The measurement of changes of the surface plasmon resonance band of gold nanoparticles, along with TEM analysis of particle size and morphology, provided an important means for assessing the reaction kinetics. The reductive mediation of Pt-H species on the Pt nanocrystal surface is believed to play an important role in the Pt-catalyzed formation of gold nanoparticles. This important physical insight is evidenced by comparison of the rates of the Pt-catalyzed formation of gold nanoparticles in the presence and in the absence of hydrogen (H(2)), which adsorb dissociatively on a Pt nanocrystal surface forming Pt-H species. Pt-H effectively mediates the reduction of AuCl(4)(-) toward the formation of gold nanoparticles. Implications of the findings to the controllability over size, composition, and morphology of metal nanoparticles in the aqueous synthesis environment are also discussed.     

酸碱度对金纳米结构形貌的调控及其机理研究

本文通过调节环境pH酸碱度改变聚电解质膜中氨基基团的键合状态,以控制聚电解质膜表面金纳米粒子的原位还原与自组装过程中的聚集行为,发现当聚电解质膜经pH为5.40的去离子水处理后可在其表面制备出片状金纳米结构;经pH为0.65的强酸溶液处理后,可在膜表面制备出树枝状的金纳米结构,且尺寸比pH为5.40条件下增大一倍;经pH为12.77的强碱溶液处理后,金纳米粒子的聚集状态发生改变,形成了球形纳米结构;对金纳米粒子形貌的调控机理进行了初步探讨.     

Measuring the unusually slow ionic diffusion in polyaniline via study of yolk-shell nanostructures

We demonstrate a unique capability in partially oxidizing the oligoaniline shell on gold nanoparticles to polyaniline. Because of the solubility difference, the unreacted inner shell section can be selectively dissolved by 2-propanol, giving yolk-shell nanostructures and, thus, making it possible for assessing the oxidized section. The ionic diffusion through the polymer shell is found to be the rate-determining step in the overall process. Conservative estimates show that the diffusion coefficient of AuCl(4)(-) is at least 700 times slower than that of the typical rate values in traditional studies. It is most likely caused by the lack of micropores in the polymer structures. Such mircopores are hard to avoid in preparing polymer membranes by casting or drying of polymers dissolved in organic solvents. We can rule out the presence of irregular pores on the basis of the uniformly oxidized shell section. With the nanoscale shells, the system is sensitive enough to detect minute changes in the shell or small differences among the individual nanoparticles. Even with a small increase in porosity, for example, when the polyaniline shell is swollen using small amounts of DMF (3%, 5%, or 10% in aqueous solutions), the diffusion coefficient of AuCl(4)(-) increases to 4, 11, and 17 times, respectively. Thus, our study demonstrates a new methodology for studying the diffusion of ions in hydrophobic polymers.     

A facile method of achieving low surface coverage of Au nanoparticles on an indium tin oxide electrode and its application to protein detection

Low surface coverage of Au nanoparticles on an indium tin oxide electrode for sensitive electrochemical detection was achieved using electrostatic adsorption of AuCl(4)(-) followed by reduction.     

Platinum-catalyzed synthesis of water-soluble gold-platinum nanoparticles

The ability to control composition and size in the synthesis of bimetallic nanoparticles is important for the exploitation of the bimetallic catalytic properties. This paper reports findings of an investigation of a new approach to the synthesis of gold-platinum (AuPt) bimetallic nanoparticles in aqueous solution via one-phase reduction of AuCl(4-) and PtCl(4)(2-) using a combination of reducing and capping agents. Hydrogen served as a reducing agent for the reduction of Pt(II), whereas acrylate was used as a reducing agent for the reduction of Au(III). The latter reaction was found to be catalyzed by the formation of Pt as a result of the reduction of Pt(II). Acrylate also functioned as capping agent on the resulting nanocrystals. By controlling the feed ratios of AuCl(4-) and PtCl(4)(2-) and the relative concentrations of acrylate, an effective route for the preparation of AuPt nanoparticles with bimetallic compositions ranging from approximately 4 to 90% Au and particle sizes ranging from 2 to 8 nm has been demonstrated. The composition, size, and shell properties were characterized using transmission electron microscopy, direct current plasma-atomic emission spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. Implications of the results to the exploration of bifunctional catalysts are also briefly discussed.     

Morphology of gold nanoparticles synthesized by filamentous cyanobacteria from gold(I)-thiosulfate and gold(III)--chloride complexes

Plectonema boryanum UTEX 485, a filamentous cyanobacterium, has been reacted with aqueous Au(S(2)O(3))(2)(3)(-) and AuCl(4)(-) solutions ( approximately 400-550 mg/L Au) at 25-100 degrees C for up to 1 month and at 200 degrees C for 1 day. The interaction of cyanobacteria with aqueous Au(S(2)O(3))(2)(3)(-) promoted the precipitation of cubic (100) gold nanoparticles (<10-25 nm) at membrane vesicles and admixed with gold sulfide within cells and encrusted on the cyanobacteria, whereas reaction with AuCl(4)(-) resulted in the precipitation of octahedral (111) gold platelets ( approximately 1-10 microm) in solutions and nanoparticles of gold (<10 nm) within bacterial cells. Functional groups imaged by negative ion TOF-SIMS on (111) faces of the octahedral platelets were predominantly Cl and CN, with smaller amounts of C(2)H and CNO.     

Gas-phase experiments on Au(III) photochemistry

Irradiation of AuCl(4)(-) and AuCl(2)(OH)(2)(-) in the gas-phase using ultraviolet light (220-415 nm) leads to their dissociation. Observed fragment ions for AuCl(4)(-) are AuCl(3)(-) and AuCl(2)(-) and for AuCl(2)(OH)(2)(-) are AuCl(2)(-) and AuClOH(-). All fragment channels correspond to photoreduction of the gold atom to either Au(II) or Au(I) depending on the number of neutral ligands lost. Fragment branching ratios of AuCl(4)(-) are observed to be highly energy dependent and can be explained by comparison of the experimental data to calculated threshold energies obtained using density functional theory. The main observed spectral features are attributed to ligand-to-metal charge transfer transitions. These results are discussed in the context of the molecular-level mechanisms of Au(III) photochemistry.     

Silver-assisted colloidal synthesis of stable, plasmon resonant gold patches on silica nanospheres

Patchy particles possessing heterogeneous surface composition show great promise as self-organizing building blocks for new classes of hierarchical functional structures. A major hurdle is the scalable synthesis of stable patches on nanosized core particles with arbitrarily defined patch number and coverage. So far, few methods have been reported which could be expected to meet these challenges. Recently, we described the heterogeneous nucleation and growth of silver patches on silica nanospheres via a template free colloidal route. The patches produced, although tunable in size and number and showing interesting plasmon resonant properties, were rather unstable and degraded rapidly during attempts to process them further. In the present work, therefore, we set out to explore if related approaches can be employed to produce patchy particles involving gold, which is known to be more stable. The differences between typical patch precursors Ag(+) and [AuCl(x)(OH)(4-x)](-) and their respective interactions with amorphous silica make this a significant challenge. We show that preformed small silver patches in addition to the presence of a reducing agent are necessary for the formation of gold patches conformal to the silica nanosphere surface. Systematic study of the process parameters and their influence on the patchy particle morphology as well as in-depth analytical transmission electron microscopy investigation of the patch composition reveal that patches spread over the silica surface via a cycle of galvanic dissolution and redeposition of silver. The resulting gold patchy particles remain stable during subsequent storage or washing and display tunable plasmon resonances within the visible and near-IR spectrum.     

Kinetics of hydrogen production upon reduction of aqueous TiO2 nanoparticles catalyzed by Pd(0), Pt(0), or Au(0) coatings and an unusual hydrogen abstraction; steady state and pulse radiolysis study

Reduction of H(+) by TiO(2) electrons (e(TiO)(2)(-)) in aqueous colloidal solution takes place in the presence of surface metal catalysts. The catalytic reduction gives rise to adsorbed hydrogen atoms. In the presence of Pd(0) or Pt(0), material balance shows that most of the adsorbed H atoms combine to molecular hydrogen. When the TiO(2) nanoparticles are partially coated with Au(0) instead of Pd(0) or Pt(0), a higher than expected molecular hydrogen level is observed, attributed to a short chain reaction involving hydrogen abstraction from 2-propanol. This unusual hydrogen abstraction reaction has not been reported before. The mechanism and energy balance are discussed. The surface modification of TiO(2) nanoparticles was carried out by reduction of K(2)PdCl(4), H(2)PtCl(6), or HAuCl(4) with e(TiO)(2)(-). The latter had been generated through electron injection from hydrated electrons, hydrogen atoms, or 2-propanol radicals, produced by gamma or pulse radiolysis prior to the addition of the metal compounds. Upon addition of the metal compounds, immediate reactions take place producing metals clusters (M(0)) by multistep reductions reactions on the TiO(2) surface. The chemical kinetics involving the different metals and the reaction rate constant of e(aq)(-) and e(TiO)(2)(-) with AuCl(4)(-) is also reported.     

Comparison between measurements of elasticity and free amino group content of ovalbumin microcapsule membranes: discrimination of the cross-linking degree

Gold nanoparticle-doped poly(2-vinylpyridine) (P2VP) microcapsules and foam films were synthesized and assembled at the P2VP chloroform solution/HAuCl(4) aqueous solution interface at 25 °C. It was found that Au nanoparticles with the average diameter of 2.1 nm were homogeneously embedded in and adsorbed on the walls of the capsules and foams, the nanoparticles were composed of Au(0) and Au(III) with the molar ratio of about 75/25, and the mass percent of Au elements was measured to be 19.65%. The formation of the nanostructures was attributed to the self-assembly of P2VP at the liquid/liquid interface, the simultaneous reduction of AuCl(4)(-) ions by a small amount of ethanol in the chloroform and adsorption of AuCl(4)(-) ions. After irradiated by UV-light for 1h, the average diameter of the nanoparticles was found to be 2.2 nm, and the AuCl(4)(-) ions were transformed to Au(0) completely. The catalytic performance of these composite nanostructures were evaluated by using the reduction of 4-nitrophenol (4-NP) by potassium borohydride in aqueous solutions. The catalytic activity was very high in the first cycle, decreased rapidly and slightly in the second and third cycles, respectively, due to the aggregation of some nanoparticles, and stabilized after the third cycle.     

Formation process of two-dimensional networked gold nanowires by citrate reduction of AuCl4- and the shape stabilization

Gold nanowires with a two-dimensional (2-D) network structure were formed by citrate reduction of AuCl4- with a low concentration of citrate. The structure change during the growth processes was observed by transmission electron microscopy (TEM) and the variation in concentrations of gold species in the aqueous solution was monitored by UV-vis spectra and Inductively Coupled Argon Plasma Emission Spectrophotometer (ICAP). The formation of 2-D gold nanowires was induced by the small amount of reducing agent because the preliminary gold nanoparticles formed by reduction of AuCl4- were thermodynamically unstable in the aqueous solution due to the insufficient capping of citrate. One of the key points of nanowire formation is the preferential adsorption of AuCl4- instead of citrate ions on the surface of the preliminary gold particles, which results in an attracting force between gold nanoparticles. We propose a hit-to-stick-to-fusion model, in which gold nanoparticles adhere by the attraction force and stick together, causing selective deposition of reduced gold metallic species on the concave surface of the two sticking particles, followed by fusion into nanowires. Nanowires then connect with each other, forming a network structure. The evidence obtained from TEM observation of transformation from gold nanowires on a TEM grid to large nanoparticles by hydrogen gas reduction and time-resolved measurements of gold ions suggest that gold ions not only are crucial for the growth of gold nanowires but also play an important role in stabilizing the shape of gold nanowires during the formation process. This method for synthesizing 2-D gold nanowires is simple and relatively easy application to the synthesis of other metallic nanowires such as silver or platinum is expected.     

Facile synthesis of gold nanoparticles with narrow size distribution by using AuCl or AuBr as the precursor

Gold(I) halides, including AuCl and AuBr, were employed for the first time as precursors in the synthesis of Au nanoparticles. The synthesis was accomplished by dissolving Au(I) halides in chloroform in the presence of alkylamines, followed by decomposition at 60 degrees C. The relative low stability of the Au(I) halides and there derivatives eliminated the need for a reducing agent, which is usually required for Au(III)-based precursors to generate Au nanoparticles. Controlled growth of Au nanoparticles with a narrow size distribution was achieved when AuCl and oleylamine were used for the synthesis. FTIR and mass spectra revealed that a complex, [AuCl(oleylamine)], was formed through coordination between oleylamine and AuCl. Thermolysis of the complex in chloroform led to the formation of dioleylamine and Au nanoparticles. When oleylamine was replaced with octadecylamine, much larger nanoparticles were obtained due to the lower stability of [AuCl(octadecylamine)] complex relative to [AuCl(oleylamine)]. Au nanoparticles can also be prepared from AuBr through thermolysis of the [AuBr(oleylamine)] complex. Due to the oxidative etching effect caused by Br(-), the nanoparticles obtained from AuBr exhibited an aspect ratio of 1.28, in contrast to 1.0 for the particles made from AuCl. Compared to the existing methods for preparing Au nanoparticles through the reduction of Au(III) compounds, this new approach based on Au(I) halides offers great flexibility in terms of size control.     

Electrochemical synthesis of gold nanocrystals and their 1D and 2D organization

Size-controlled gold nanocrystals were conveniently synthesized through direct electroreduction of bulk AuCl(4)(-) ions in the presence of poly(N-vinylpyrrolidone) (PVP). PVP greatly enhanced the gold particle formation process and also significantly retarded the gold electrodeposition process, allowing the electrochemical synthesis of gold nanocrystals to be carried out in the form of simple electroreduction. This novel electrochemical method may be extended to synthesis of other noble metal nanoparticles with controllable size on a large scale. The PVPK90-protected gold nanocrystals spontaneously self-assembled into nearly ordered 2D close-packed arrays and interesting 1D nanostructures. The aggregation of unstable PVPK17-protected gold nanocrystals resulted in the formation of ultrathin single-crystalline films. PVP plays multifunctional roles in controlling the size and shape of gold nanocrystals and in inducing individual gold nanocrystals to construct 1D nanostructures. The nanoparticle self-assembling technique based on PVP offers a simple, but effective, path to organize individual gold nanoparticles into various 1D and 2D nanostructured materials.     

Hematite spindles with optical functionalities: growth of gold nanoshells and assembly of gold nanorods

The layer-by-layer (LBL) assembly method, combined with the seeded growth technique, have been used to deposit gold shells on the surface of hematite (alpha-Fe(2)O(3)) spindles. While the LBL method yields dense coatings of preformed Au nanoparticles, when AuCl(-)(4) ions are further reduced by a mild reducing agent, thicker, rough nanostructured shells can be grown. The deposition process was monitored by TEM and UV-visible spectroscopy, demonstrating a gradual change in the optical features of the colloids as the surface is more densely covered. The particles so-prepared can find useful applications in cancer therapy and as SERS substrates. Additionally, we show that Au nanorods can be assembled on hematite spindles, providing a flexible way to tune the optical properties of the resulting composite colloids.     

Distinguishing carbones from allenes by complexation to AuCl

Quantum chemical calculations have been performed for the dicoordinated carbon compounds C(PPh(3))(2), C(NHC(Me))(2), R(2) C=C=CR(2) (R = H, F, NMe(2)), C(3)O(2), C(CN)(2)(-) and N-methyl-substituted N-heterocyclic carbene (NHC(Me)). The geometries of the complexes in which the dicoordinated carbon molecules bind as ligands to one and two AuCl moieties have been optimized and the strength and nature of the metal-ligand interactions in the mono- and diaurated complexes were investigated by means of energy decomposition analysis. The goal of the study is to elucidate the differences in the chemical behavior between carbones, allenes and carbenes. The results show that carbones bind one and two AuCl species in η(1) fashion, whereas allenes bind them in η(2) fashion. Compounds with latent divalent carbon(0) character can coordinate in more than one way, with the dominant mode indicating the degree of carbone or allene character. The calculated structures of the mono- and diaurated tetraaminoallenes (TAAs) reveal that TAAs exhibit a chameleon-like behavior: The bonding situation in the equilibrium structure is best described as allene [(R(2)N)(2)]C=C=C[(NR(2))(2)] in which the central carbon atom is a tetravalent C(IV) species, but the reactivity suggests that TAAs should be considered as divalent C(0) compounds C{C[(NR(2))(2)]}(2), that is, as "hidden" carbones. Carbon suboxide binds one AuCl preferentially in the η(1) mode, whereas the equilibrium structures of the η(1)- and η(2)-bonded diaurated complex are energetically nearly degenerate. The doubly negatively charged isoelectronic carbone C(CN)(2)(2-) binds one and two AuCl very strongly in characteristic η(1) fashion. The N-heterocyclic carbene complex, [NHC(Me)(AuCl)], possesses a high bond dissociation energy (BDE) for the splitting off of AuCl. The diaurated NHC adduct, [NHC(Me)(AuCl)(2)], has two η(1)-bonded AuCl moieties that exhibit aurophilic attraction, which yield a moderate bond strength that might be large enough for synthesizing the complex. The BDE for the second AuCl in [NHC(Me)(AuCl)(2)] is clearly smaller than the values for the second AuCl in doubly aurated carbone complexes.     

Opportunistic use of tetrachloroaurate photolysis in the generation of reductive species for the production of gold nanostructures

The photolysis of gold salts is rarely viewed as the initiation for gold nanoparticle (AuNP) formation. Yet, photolysis of AuCl(4)(-) generates chlorine atoms whose rich hydrogen transfer chemistry can readily generate strongly reducing radicals. Interesting precursors include hydrogen peroxide, 2-propanol, 1,4-cyclohexadiene and tetrahydrofuran; all of them yield strongly reducing radicals. Further, this group of substrates has been selected because of the innocuous and volatile nature of reagents and products, thus allowing a remarkably clean synthesis of gold nanostructures. In the case of H(2)O(2) the by-products are water and oxygen. The methodology reported here opens the door to particles that can be modified in situ or post-synthesis with custom surface covering without concern for chemical debris from the nanostructure synthesis.     

Oxonium ions from aqua regia: isolation by hydrogen bonding to crown ethers

The preparation and structures of a variety of oxonium ion tetrachloroaurate(III) salts isolated from aqua regia are reported. The new compounds are [(H(5)O(2))(2)(12-crown-4)(2)][AuCl(4)](2) (1), [(H(7)O(3))(15-crown-5)][AuCl(4)] (2), [(H(5)O(2))(benzo-15-crown-5)(2)][AuCl(4)] (3), [(H(3)O)(18-crown-6)][AuCl(4)] (4), [(H(5)O(2))(dibenzo-24-crown-8)][AuCl(4)] (5), [(H(5)O(2))(4-nitrobenzo-15-crown-5)(2)][AuCl(4)] (6), [(H(3)O)(4-nitrobenzo-18-crown-6)][AuCl(4)] (7), [(H(11)O(5))(tetrachlorodibenzo-18-crown-6)(2)][AuCl(4)] (8), and [(H(7)O(3))(dinitrodibenzo-30-crown-10)][AuCl(4)] (9). A significant correlation between the degree of proton hydration and crown ether size is observed. Aryl crown ethers are nitrated in concentrated aqua regia, but nonnitrated products may be obtained in a dilute solution of aqua regia by reaction with aqueous HAuCl(4).     

Preparation and electrochemical properties of MnO2 nanosheets attached to Au nanoparticles on carbon nanotubes

A wet chemical route for the preparation of MnO(2) nanosheet/Au nanoparticle/MWNT hybrid materials is developed. The Au nanoparticles are prepared by reducing AuCl(4)(-) with citrate and attached to thiol-modified MWNTs. Owing to the reducing property and the binding ability to Mn-containing species of capping agents surrounded the Au nanoparticles, the MnO(2) nanosheets are formed on the surface of Au nanoparticles. The ternary nanocomposites of MnO(2)/Au/MWNT have been characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and FT-IR spectroscopy. The affiliation of MnO(2) nanosheets into the hybrids remarkably enhances the electrocatalytic performance of Au nanoparticle/MWNT towards the oxygen reduction reaction. The specific capacitance of the ternary hybrids is also increased dramatically comparing with that of Au/MWNT.