Macroporous anion exchanger purolite A-500 loaded with ferron for palladium(II) recovery

A systematic study on interaction of Pd(II) with 7-iodo-8-hydroxyquinoline-5 sulfonic acid (Ferron) and the strongly basic anion exchange resin Purolite A-500 in its chloride form was carried out. It was found that for Ferron/resin ratio ranging from 0.15 to 0.70 mmol g-1, the retention of chelating reagent on the investigated ion exchanger is practically quantitative. The sorption increase of Pd(II) on Ferron-loaded resin was observed for higher values of parameters like: pH solution, initial concentration and temperature. It was observed that the equilibrium distribution of Pd(II) between sorbent and solution could adequately be described by the Langmuir model with two parameters. The thermodynamic quantities characteristic of Pd(II) sorption process (ΔG = -18.4 kJ mol^-1; ΔH = 11.7 kJ mol^-1; ΔS = 104.4 J mol^-1 K^-1) suggest a strong affinity between Ferron-loaded resin and the tested cation.     

Application of a macroporous resin containing imidazoline groups to preconcentration and separation of gold, platinum and palladium prior to ICP-AES determination

A new functional resin with a long functional side chain was synthesized by modification of aminated macroporous poly(vinyl chloride) resin with cyanoethylene and ethylenediamine. Traces of Au(III), Pt(IV) and Pd(II) in aqueous solution were quantitatively adsorbed in the acidity range of pH 4 and C(H(+)) 3 M. The rate of equilibration is high; Cu(2+), Fe(3+), Ni(2+), etc. exhibit little interference on the adsorption of the sought noble metals. The saturated adsorption capacities for Au(III), Pt(IV), Pd(II) and Ir(IV) in 2 M HCl were 4.0, 1.57, 2.26, 1.85 mmol g(-1). Adsorbed ions can be quantitatively desorbed by 4% thiourea +0.25 M H(2)SO(4). The resin has good reusability, and can be used for preconcentration and separation of Au(III), Pt(IV) and Pd(II) prior to their determination by ICP-AES with satisfactory results.     

Microwave-assisted solid-phase organic synthesis (MASPOS) as a key step for an indole library construction

[reaction: see text] Microwave-assisted solid-phase organic synthesis (MASPOS) has been demonstrated to significantly facilitate the Cu(II)- or Pd(II)-mediated ring closure of the resin-bound 2-alkynylanilides. Under microwave irradiation at 200 degrees C [for Cu(OAc)(2), NMP] or 160 degrees C [for Pd(MeCN)(2)Cl(2), THF] for 10 min, 1-acyl-2-alkyl-5-arenesulfamoylindoles were obtained, after cleavage from the resin, in 95-99% purities and in 65-82% overall yields via a 5-step synthetic sequence.     

Determination of tin by resin-suspension electrothermal atomic absorption spectrometry after enrichment as the complex with ammonium pyrrolidinedithiocarbamate.

A resin-phase extraction method has been optimized for the trace determination of tin(II) by ETAAS. Tin(II) was extracted on a finely divided anion exchange resin as the complex with ammonium pyrrolidinedithiocarbamate (APDC). The resin was collected on a membrane filter and then dispersed in 1.00 ml of 1 mol l(-1) nitric acid containing 100 microg of Pd(II) and 60 microg of Ni(II). The resulting resin suspension was subjected to GFAAS. The proposed method was applied to the determination of tin(II) in hydrochloric acid.     

Preconcentration of the herbicide glyphosate and its metabolite AMPA by immobilised metal ion affinity chromatography (IMAC)

A method based on Immobilised Metal Ion Affinity Chromatography (IMAC) using a chelating resin (Spheron Oxine 1000) loaded with Pd(II) is evaluated for the extraction and preconcentration of glyphosate and AMPA from natural water samples. The efficiency of the metal-loaded resin in retaining glyphosate and AMPA and the ability of different reagents to recover them is investigated. The most effective elution solution for the recovery of both analytes from the resin is found to be a mixture of 0.1 M HCI and 1 M NaCl. The effect of flow rate, analyte concentration, and sample volume is evaluated. The optimised experimental conditions are then used in the extraction of the analytes from spiked natural waters. The use of the Pd loaded resin led to recoveries ranging from 80-90% for glyphosate and 60-80% for AMPA.     

Synthesis of N-Methyl-2-Thioimidazole Resin and Its Complex Behavior for Noble Metal Ions

The functional group capacity and the percentage of functional group conversion of crosslinked polystyrene resin bearing N-methyl-2-thioimidazole (MTIR) synthesized under optimum conditions are as high as 4.08 mmol/g resin and 96.0%, respectively. The apparent activation energies of sorption of MTIR for Au(III) and Pt(IV) are 13.1 and 13.4 kJ/mol, respectively. The sorption behavior of MTIR for Au(III), Pt(IV), and Pd(II) obeys the Freundlich and Langmuir isotherms. The sorption capacities of MTIR for Au(III), Pt(IV), and Pd(II) are as high as 4.33, 2.12, and 2.33 mmol/g resin, respectively. Au(III), Pt(IV), and Pd(II) adsorbed on MTIR can be eluted quantitatively by the eluant. The resin can be regenerated easily and reused without an obvious decrease in the sorption capacity for Au(III) and Pd(II). The resin has high sorption selectivity for noble metal ions. Au(III) can be separated quantitatively in the presence of high concentrations of Cu²⁺, Fe³⁺, Ni²⁺, and Mn²⁺. The recovery of platinum from the spent industrial catalysts is 98.6% by MTIR. The preconcentration and separation of palladium and platinum from the anode deposits of electrolysis of crude copper have been investigated. The resin may have potential industrial uses.     

A new resin containing benzimidazolylazo group and its use in the separation of heavy metals

A new resin incorporating benzimidazolylazo group into a matrix of polystyrene divinylbenzene has been prepared. The exchange capacity of the resin for the ions mercury(II), silver(I) and palladium(II) as a function of pH has been determined. The resin exhibits no affinity for alkali or alkaline earth metals. It is highly selective for Hg(II), Ag(I) and Pd(II). In column operation, it has been observed that Hg(II), Ag(I) and Pd(II) in trace quantities can be selectively separated from geological, medicinal and environmental samples.     

Modified Merrifield resin-supported PCP pincer palladium nanoparticles as a new polymeric catalyst for cyanation of aryl iodides

A new tridentate PCP pincer palladium (Pd) complex based on cross-linked Merrifield resin containing phosphinite ligand was synthesized and characterized. This polymeric catalyst was used in preparation of benzonitriles from different aryl iodides using potassium hexacyanoferrate (II) as a cyanide source. The presence of active metallic Pd in the catalyst was verified by X-ray power diffraction and X-ray photoelectron spectroscopy techniques. Transmission electron microscopy showed good dispersion of catalytic sites in the range of 30–50 nm. The catalyst is easily separated from reaction mixture and can be used for several times in repeating cycles without considerable loss of activity. The leaching of Pd from the support is negligible, which was confirmed by inductively coupled plasma–optical emission spectrometry and hot filtration test.     

Preparation and properties of a new chelating resin containing 2-nitroso-1-naphthol

A new chelating ion-exchange resin based on a macroreticular polystyrene—divinyl benzene copolymer and containing 2-nitroso-1-naphthol as the functional species has been synthesized. It is highly stable in acidic and alkaline solutions. Its sorption characteristics for V(V), Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Hg(II), Pd(II) and U(VI) have been investigated over the pH range 1.0–7.0 and the exchange-capacities have been found to be generally higher than those of a similar resin containing 1-nitroso-2-naphthol.     

Separation and pre-concentration of palladium(II) from environmental and industrial samples by formation of a derivative of 1,2,4-triazole complex on Amberlite XAD–2010 resin

A simple separation/pre-concentration method was developed for extraction of Pd(II) in various environmental samples, based on its adsorption of 4–phenyl–5–{[(4–phenyl–5–pyridin–4–yl–4H–1,2,4–triazole–3–yl)thio]methyl}–4H–1,2,4–triazole–3–thyol (PPTTMET) complex on Amberlite XAD–2010 resin in a mini column. The ligand has high affinity for Pd(II) among many other metals that are taken into consideration. The flame atomic absorption spectrometry is employed to determine the concentration of Pd(II). The optimum working conditions which were determined are as follows: 0.05?mol?L^?1 HNO₃ as working medium, 1.0?mol?L^?1 HCI in acetone as elution solvent, 0.75?mg of PPTTMET amount and 750?mL of sample volume. The system was independent from the flow rates between 3.1 and 23.1?mL?min^?1. The Pd(II) adsorption capacity of Amberlite XAD–2010 resin was found to be 12.8?mg?g^?1 and the enrichment factor was calculated as 375. The method was successfully applied for the determination of Pd(II) in motorway dust samples, anodic sludge, gold ore, industrial electronic waste materials and various water samples.     

Providing support in favor of the existence of a Pd(II)/Pd(IV) catalytic cycle in a Heck-type reaction

The complex [Pd(O,N,C-L)(OAc)], in which L is a monoanionic pincer ligand derived from 2,6-diacetylpyridine, reacts with 2-iodobenzoic acid at room temperature to afford the very stable pair of Pd(IV) complexes (OC-6-54)- and (OC-6-26)-[Pd(O,N,C-L)(O,C-C(6)H(4)CO(2)-2)I] (1.5:1 molar ratio, at -55?°C). These complexes and the Pd(II) species [Pd(O,N,C-L)(OX)] and [Pd(O,N,C-L')(NCMe)]ClO(4), (X = MeC(O) or ClO(3), L' = another monoanionic pincer ligand derived from 2,6-diacetylpyridine), are precatalysts for the arylation of CH(2)=CHR (R = CO(2)Me, CO(2)Et, Ph) using IC(6)H(4)CO(2)H-2 and AgClO(4). These catalytic reactions have been studied and a tentative mechanism is proposed. The presence of two Pd(IV) complexes was detected by ESI(+)-MS during the catalytic process. All the data obtained strongly support a Pd(II)/Pd(IV) catalytic cycle.     

Kinetic-spectrophotometric determination of palladium in hydrogenation catalyst by its catalytic effect on the oxidation of pyrogallol red by hydrogen peroxide

A new kinetic-spectrophotometric method is described for the determination of ultra trace amounts of Pd(II). The methods based on catalytic action of Pd(II) on the oxidation of pyrogallol red (PGR) with hydrogen peroxide at pH 9.7. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of the PGR at 540 nm, for the first 4.5 min from initiation of the reaction. Calibration curve was linear in the range of 0.02-1.00 microg ml(-1) Pd(II). The limit of detection is 0.017 microg ml(-1) Pd(II). The relative standard deviation (R.S.D.) for ten replicate analyses of 0.03 and 0.60 microg ml(-1) Pd(II) was 1.5 and 0.9%, respectively. The influence of more than 40 potential interfering ions was studied for the selectivity. The proposed method was used for the determination of palladium in catalytic material.     

以硫醚为主链的螯合树脂研究Ⅰ.4-氨基安替吡啉树脂和乙基原磺酸基树脂的合成及吸附性能

聚环硫氯丙烷或环硫氯丙烷与环氧氯丙烷共聚物，在少量二乙烯三胺存在下制得交联预聚物，将交联预聚物与4－氨基安替吡啉（4AAP）或乙基原磺酸钾（PEA）反应，制得四种侧链带氨基安替吡啉，乙基原碘酸基的新型螯合树脂。它们对贵金属具有优良的吸附性能和高的吸附选择性。并通过X－射线光电子能谱初步探讨了树脂对金属离子的螯合作用。     

Nanomorphology of polymer frameworks and their role as templates for generating size-controlled metal nanoclusters

The microporous (gel-type) functional resin co-poly-N,N-dimethylacrylamide (DMAA) (88 % mol)/methacrylic acid (MAA) (8 % mol)/N,N'-methylenebisacrylamide (MBAA) (4 % mol) (MPIF(H)) is employed as the hosting framework for the production of resin-supported Pd(0) nanoclusters. The obtained composite MPIF(-)Na(+)/Pd(0) is prepared upon reducing, in ethanol, MPIF(-)Pd(2+) (0.5), obtained upon previous homogeneous dispersion of "Pd(2+)" inside the resin particles (XRMA control) through ion-exchange. Metal nanoclusters appear to be size-controlled (2.0+/-0.2 nm) and are seen to reasonably fit the predominant resin "nanopores" diameter, determined in ethanol (3.2 nm) by means of inverse steric exclusion chromatography (ISEC).     

Architectural formation of a conjugated bimetallic Pd(II) complex via oxidative complexation and a tetracyclic Pd(II) complex via self-assembling complexation

The conjugated homobimetallic palladium(II) complex [(L1)Pd(qd)Pd(L1)] (qd = quinonediimine) was obtained in a one-pot reaction by the in-situ oxidative complexation of 1,4-phenylenediamine with the palladium(II) complex [(L1)Pd(MeCN)] (H2L1 = N,N'-bis(2-phenylethyl)-2,6-pyridinedicarboxamide) while in the absence of an additional ligand [(L1)Pd(MeCN)] was converted to the amide-bridged macrocyclic tetramer [Pd(L1)]4.     

Preparation and analytical properties of a chelating resin functionalized with 1-hydrazinophthalazine ligand

A poly[styrene-co-(divinylbenzene)] resin (XAD-4) functionalized with 1-hydrazinophthalazine ligand has been prepared and its analytical properties investigated. The pH dependence of sorption of metal ion on the resin has been determined for Cu(II), Ni(II), Co(II), Zn(II), Cd(II), Pb(II), Fe(III) and Cr(III). Trace amounts of these metal ions were quantitatively retained on the resin and recovered by eluting with 1 mol l(-1) hydrochloric acid. The resin was found to be selective for Fe(III) and its separation from other metal ions was carried out effectively. Metal ions concentrations were determined using AAS.     

Pd-catalyzed intermolecular amidation of aryl halides: the discovery that xantphos can be trans-chelating in a palladium complex

A general method for the intermolecular coupling of aryl halides and amides using a Xantphos/Pd catalyst is described. This system displays good functional group compatibility, and the desired C-N bond forming process proceeds in good to excellent yields with 1-4 mol % of the Pd catalyst. Additionally, the arylation of sulfonamides, oxazolidinones, and ureas is reported. The efficiency of these transformations was found to be highly dependent on reaction concentrations and catalyst loadings. A Pd complex resulting from oxidative addition of 4-bromobenzonitrile, (Xantphos)Pd(4-cyanophenyl)(Br) (II), was prepared in one step from Xantphos, Pd(2)(dba)(3), and the aryl bromide. Complex II proved to be an active catalyst for the coupling between 4-bromobenzonitrile and benzamide. X-ray crystallographic analysis of II revealed a rare trans-chelating bisphosphine-Pd(II) structure with a large bite angle of 150.7 degrees.     

Flame AAS and UV-VIS determination of cobalt, nickel and palladium using the synergetic effect of 2-benzoylpyridine-2-pyridylhydrazone and thiocyanate ions

A quantitative synergetic extraction procedure for cobalt, nickel and palladium from thiocyanate aqueous solutions into methyl isobutyl ketone (MIBK), containing 2-benzoylpyridine-2-pyridylhydrazone (BPPH), was studied by flame atomic absorption spectrometry (FAAS) and molecular absorption spectrometry (UV-VIS). Using FAAS, linear calibration graphs were obtained from 0.0-0.5 mg l(-1) Co(II), 0.0-1.5 mg l(-1) Ni(II) and 0.0-2.0 mg l(-1) Pd(II). The reproducibilities were s(r,Co(II))=2.0%, s(r,Ni(II))=1.0% and s(r,Pd(II))=1.3% and the limits of detection were c(L,Co(II))=0.004 mg l(-1), c(L,Ni(II))=0.009 mg l(-1) and c(L,Pd(II))=0.012 mg l(-1). Using UV-VIS method the linear calibration graphs were 0.0-0.5 mg l(-1) for Co(II), 0.0-1.0 mg l(-1) for Ni(II) and 0.0-2.0 mg l(-1) for Pd(II). The reproducibilities were s(r,Co(II))=1.3%, s(r,Ni(II))=1.7% and s(r,Pd(II))=1.0% and the limits of detection were c(L,Co(II))=0.001 mg l(-1), c(L,Ni(II))=0.004 mg l(-1) and c(L,Pd(II))=0.002 mg l(-1). The extraction method is almost free from interferences and has been successfully applied to the determination of cobalt, nickel and palladium in dental alloys.     

Synthesis of palladium nanoparticles by sonochemical reduction of palladium(II) nitrate in aqueous solution

The sonochemical synthesis of stable palladium nanoparticles has been achieved by ultrasonic irradiation of palladium(II) nitrate solution. The starting solutions were prepared by the addition of different concentrations of palladium(II) nitrate in ethylene glycol and poly(vinylpyrrolidone) (PVP). The resulting mixtures were irradiated with ultrasonic 50 kHz waves in a glass vessel for 180 min. The UV-visible absorption spectroscopy and pH measurements revealed that the reduction of Pd(II) to metallic Pd has been successfully achieved and that the obtained suspensions have a long shelf life. The protective effect of PVP was studied using Fourier transform infrared (FT-IR) spectroscopy. It has been found that, in the presence of ethylene glycol, the stabilization of the nanoparticles results from the adsorption of the PVP chain on the palladium particle surface via the coordination of the PVP carbonyl group to the palladium atoms. The effect of the initial Pd(II) concentration on the Pd nanoparticle morphology has been investigated by transmission electron microscopy. It has been shown that the increase of the Pd(II)/PVP molar ratio from 0.13 x 10(-3) to 0.53 x 10(-3) decreases the number of palladium nanoparticles with a slight increase in particle size. For the highest Pd(II)/PVP value, 0.53 x 10(-3), the reduction reaction leads to the unexpected smallest nanoparticles in the form of aggregates.     

1-(2-氨乙基)吡咯烷树脂的合成及其对贵金属的吸附

研究了试剂摩尔比、反应温度、反应时间对1-(2-氨乙基)吡咯烷树脂合成的影响规律.此树脂的功能基含量2.74 mmol/g树脂,对Au(Ⅲ)、Os(Ⅳ)、Pt(Ⅳ)、Ir(Ⅳ)、Ru(Ⅲ)、Pd(Ⅱ)的吸附容量分别高达950、520、436、418、314、302 mg/g树脂.FT-IR、元素分析表征了树脂结构.测定了吸附速率曲线,配位比,表观吸附活化能△E_(Au)=6.4、△E_(Pt)=33.7kJ/mol.XPS研究了吸附机理.