CuI/Fe3O4 NPs@Biimidazole IL‐KCC‐1 as a leach proof nanocatalyst for the synthesis of imidazo[1,2‐a]pyridines in aqueous medium

In the present work, an innovative leach proof nanocatalyst based on dendritic fibrous nanosilica (DFNS) modified with ionic liquid loaded Fe₃O₄ NPs and CuI salts was designed and applied for the rapid synthesis of imidazo[1,2‐a]pyridines from the reaction of phenyl acetylene, 2‐aminopyridine, and aldehydes in aqueous medium. The structure of the synthesized nanocatalyst was studied by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transform infrared (FT‐IR), flame atomic absorption spectroscopy (FAAS), energy‐dispersive X‐ray (EDX), and X‐ray diffraction (XRD), vapor–liquid–solid (VLS), and adsorption/desorption analysis (Brunauer–Emmett–Teller [BET] equation) instrumental techniques. CuI/Fe₃O₄NPs@IL‐KCC‐1 with high surface area (225 m² g^?1) and porous structure not only exhibited excellent catalytic activity in aqueous media but also, with its good stability, simply recovered by an external magnet and recycled for eight cycles without significant loss in its intrinsic activity. Higher catalytic activity of CuI/Fe₃O₄NPs@IL‐KCC‐1 is due to exceptional dendritic fibrous structure of KCC‐1 and the ionic liquid groups that perform as strong anchors to the loaded magnetic nanoparticles (MNPs) and avoid leaching them from the pore of the nanocatalyst. Green reaction media, shorter reaction times, higher yields (71–97%), easy workup, and no need to use the chromatographic column are the advantages of the reported synthetic method.     

Ultrasound assisted eco-friendly synthesis of 3-cinnamoyl coumarins using N,N'-(1,2-phenylene)bis(2-aminobenzamide) dichloro cobalt immobilized on mesoporous Al-SBA-15 as a new and recyclable catalyst

ABSTRACT

A novel mesoporous Al-SBA-15 modified by N,N'-(1,2-phenylene)bis(2-aminobenzamide) dichloro cobalt has been prepared and applied as a reusable catalyst in the 3-cinnamoyl coumarins synthesis via three-component reaction between benzaldehydes, salicylaldehydes and ethyl acetoacetate by the assist of ultrasonic irradiation. By using of the nanocatalyst and also ultrasound irradiation, the easiness and velocity of the abovementioned reaction were enhanced and an environment friendly condition was provided to synthesis of various 3-cinnamoyl coumarin compounds. The properties and structure of nanocatalyst have been specified by methods including powder X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), nitrogen adsorption–desorption analysis and scanning electronic microscopy (SEM). Superiority of this novel and viable method is due to mild reaction condition, short reaction times, high yields of 3-cinnamoyl coumarins, environmentally benign, recoverability of the CoCl₂N,N'-(1,2-phenylene)bis(2-aminobenzamide)/Al-SBA-15 catalyst and reusability with important preservation in its catalytic activity.     

Expeditious synthesis of diverse spiro fused quinoxaline derivatives using magnetically separable core–shell CoFe2O4@SiO2‐SO3H nanocatalyst under ultrasonication

A magnetically separable core–shell CoFe₂O₄@SiO₂‐SO₃H nanocatalyst has been successfully exploited as a heterogeneous acid catalyst in the synthesis of diversely substituted biologically important spiro fused pyrrolo/indolo[1,2‐a]quinoxaline derivatives through the condensation of N‐(2‐aminophenyl)pyrroles/indoles and various cyclic conjugated 1,2‐diones in ethanol under ultrasonic irradiation. Room temperature synthesis, short reaction time, wide substrate scope, good to excellent yield of products and use of a magnetically separable and recyclable nanocatalyst make this method attractive and practicable.     

Covalent supporting of novel dioxo‐molybdenum tetradentate pyrrole‐imine complex on Fe3O4 as high‐efficiency nanocatalyst for selective epoxidation of olefins

A novel Mo(VI) tetradentate Schiff base complex based on two pyrrole‐imine donors was anchored covalently on Fe₃O₄ nanoparticles and characterized using physicochemical techniques. The catalytic epoxidation process was optimized in terms of the effects of solvent, reaction temperature, kind of oxidant and amount of oxidant and catalyst. Then the novel heterogeneous nanocatalyst was used for the efficient and selective catalytic epoxidation of internal alkenes (cyclohexene, cyclooctene, α‐pinene, indene and trans ‐1,2‐diphenylethene) and terminal alkenes (n ‐heptene, n ‐octene, n ‐dodecene and styrene) using tert ‐butyl hydroperoxide (70% in water) as oxidant in 1,2‐dichloroethane as solvent. The prepared nanocatalyst is very effective for the selective epoxidation of cis ‐cyclooctene with 100% conversion, 100% selectivity and turnover frequency of 1098 h⁻¹ in just 30 min. The magnetic nanocatalyst was easily recovered using an external magnetic field and was used subsequently at least six times without significant decrease in conversion.     

(3‐Oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) functionalized magnetic γ‐Fe2O3 nanoparticles: A novel and heterogeneous nanocatalyst for one‐pot and efficient four‐component synthesis of novel spiro[indeno[1,2‐b]quinoxaline derivatives

The efficient synthesis of novel spiro[indeno[1,2‐b]quinoxaline derivatives via the four‐component condensation of amines, ninhydrin, isatoic anhydride, and о‐phenylenediamine derivatives catalyzed by ( 3‐oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) supported on γ‐Fe₂O₃ as novel heterogenous magnetic nanocatalyst was described. The novel nanocatalyst was characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), vibrating sample magnetometry (VSM), Field Emission Scanning Electron Microscopy (FE‐SEM), and thermal analysis (TGA‐DTG). The nanoparticles covered by (3‐oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) showed enhanced catalytic performance in the preparation of spiro[indeno[1,2‐b]quinoxaline derivatives in excellent yields. Moreover, this method showed several advantages such as mild conditions, high yields, easy work‐up, and being environmentally friendly. The catalyst can be easily separated from the reaction mixture by an external magnet, recycled, and reused several times without a noticeable decrease in catalytic activity.     

A one-pot three-component reactions for the synthesis of fully substituted spiro indeno[1,2-b]quinoxaline derivatives

An efficient and simple approach of the synthesis of some spiro indeno[1,2-b]quinoxalines via a one-pot three-component reaction of 11H-indeno[1,2-b]quinoxalin-11-one, pyrazolone, and malononitrile in the presence of Na₂CO₃ at 70 °C is reported. This reaction has shown to have high atom economy.     

Ni掺杂的Cu-ZnO催化剂甘油加氢反应性能

采用浸渍法制备了Ni掺杂的Cu-Zn O催化剂,采用多种物理化学手段研究了其化学物理性质及甘油加氢制取1,2-丙二醇反应催化性能。结果发现,金属Ni助剂的引入可以进一步优化Ni-Cu-Zn O催化剂的甘油加氢生成1,2-丙二醇的反应活性。少量金属Ni的加入,Ni-Cu-Zn O催化剂的甘油转化率变化不大,生成1,2-丙二醇的选择性明显增加。而进一步增加Ni含量到nNi/nCu=0.5,Ni含量过高会导致Ni-Cu-Zn O催化剂中实际Cu原子的量减少,从而导致甘油转化率下降。Ni掺杂的Cu-Zn O催化剂甘油加氢性能稳定性较好,在反应102 h后没有明显变化。     

Lithium bromide as an efficient,green, and inexpensive catalyst for the synthesis of quinoxaline derivatives at room temperature

Abstract

An efficient, simple, and green procedure for the synthesis of quinoxaline derivatives is described. The condensation of 1,2-diamines with 1,2-diketones using lithium bromide (LiBr) in H₂O/EtOH as a green reaction media at room temperature affords the title compounds in high to excellent yields and in short reaction times.     

双[1,2-二(三氟甲基)乙烯-1,2-二硫基]镍与丁二烯反应的溶剂效应

采用密度泛函理论(DFT)在B3LYP/6-31G(d)水平上研究了双[1,2-二(三氟甲基)乙烯-1,2-二硫基]镍(Ni[S2C2(CF3)2]2)与丁二烯的反应机理.采用极化连续介质模型(PCM),考察了溶剂对各反应驻点的电荷分布、偶极矩、溶剂化自由能的影响.计算结果表明:Ni[S2C2(CF3)2]2与丁二烯的反应为前线轨道对称性匹配的协同反应,溶剂介电常数的增大有利于稳定各反应驻点.同时在同种溶剂中,过渡态和产物稳定的程度大于反应物,从而反应更加容易进行.     

Building block synthesis of predominantly (E) symmetrical and unsymmetrical 1,2-difluorostilbenes from 1,2-dibromo-1,2-difluoroethene

An efficient synthesis of predominantly (E) symmetrical or unsymmetrical 1,2-difluorostilbenes based on the Suzuki–Miyaura palladium-catalyzed cross-coupling reaction of arylboronic acids with predominantly (E)-1,2-dibromo-1,2-difluoroethene in the presence of Cs₂CO₃ in toluene is described. The reaction preserved the stereochemistry of the building block and performed in good yield independently of the electron-withdrawing or electron-donating character of the substituents.     

Ni掺杂的Cu-ZnO催化剂甘油加氢反应性能

采用浸渍法制备了Ni掺杂的Cu-ZnO催化剂,采用多种物理化学手段研究了其化学物理性质及甘油加氢制取1,2-丙二醇反应催化性能。结果发现,金属Ni助剂的引入可以进一步优化Ni-Cu-ZnO催化剂的甘油加氢生成1, 2-丙二醇的反应活性。少量金属Ni的加入,Ni-Cu-ZnO催化剂的甘油转化率变化不大,生成1, 2-丙二醇的选择性明显增加。而进一步增加Ni含量到n_Ni/n_Cu=0.5,Ni含量过高会导致Ni-Cu-ZnO催化剂中实际Cu原子的量减少,从而导致甘油转化率下降。Ni掺杂的Cu-ZnO催化剂甘油加氢性能稳定性较好,在反应102 h后没有明显变化。     

Synthesis of 1,2-bis(methoxyamino)cycloalkanes from alicyclic 1,2-bis(hydroxyamines)

Derivatives of 1,4-dihydroxypiperazine-2,3-dione were obtained by reaction of cis-1,2-bis(hydroxyamino)cycloalkanes with diethyl oxalate. Their alkylation with CH₂N₂ or Mel afforded 1,4-dimethoxypiperazine-2,3-diones. Hydrolysis of the latter gave 1,2-bis(methoxyamino)cycloalkanes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 925–929, April, 1996.     

Fe3O4@SiO2@sulfated boric acid as superparamagnetic and recyclable nanocatalyst‐assisted,one‐pot,pseudo four‐component synthesis of 5‐amino‐2‐aryl‐3H‐chromeno[4,3,2‐de][1,6]naphthyridine‐4‐carbonitrile derivatives

The catalytic performance of the superparamagnetic nanocatalyst Fe₃O₄@SiO₂@Sulfated boric acid as a green, recyclable, and acidic solid catalyst in the synthesis of chromeno[4,3,2‐de][1,6]naphthyridine derivatives has been studied. Chromeno[4,3,2‐de][1,6]naphthyridine derivatives via a pseudo four‐component reaction from aromatic aldehydes (1 mmol), malononitrile (2 mmol), and 2′‐hydroxyacetophenone in the presence of Fe₃O₄@SiO₂@Sulfated boric acid (0.004 g) as a nanocatalyst in 3 mL of water as a green solvent at 80°C has been synthesized. The advantages of this method are higher product yields in shorter reaction times, easy recyclability and reusability of the catalyst, and easy work‐up procedures. The nanocatalyst was reused at least six times. The nanocatalyst retained its stability in the reaction, and after reusability, it was separated easily from the reaction by an external magnet.     

1,2-Carbopentafluorophenylation of Alkynes: The Metallomimetic Pull-Push Reactivity of Tris(pentafluorophenyl)borane

We report the novel single-step 1,2-dicarbofunctionalization of an arylacetylene with an allylsilane and tris(pentafluorophenyl)borane [B(C₆F₅)₃] involving C−C bond formation with C−H bond scission at the β-position to the silicon atom of an allylsilane and B→C migration of a C₆F₅ group. The 1,2-carbopentafluorophenylation occurs smoothly without the requirement for a catalyst or heating. Mechanistic studies suggest that the metallomimetic “pull-push” reactivity of B(C₆F₅)₃ imparts consecutive electrophilic and nucleophilic characteristics to the benzylic carbon of the arylacetylene. Subsequent photochemical 6π-electrocyclization affords tetrafluoronaphthalenes, which are important in the pharmaceutical and materials sciences. Owing to the unique reactivity of B(C₆F₅)₃, the 1,2-carbopentafluorophenylation using 2-substituted furan proceeded with ring opening, and the reaction using silyl enolates formed a C−C bond with C−O bond scission at the silyloxy-substituted carbon.     

Doubly hydrogen-bridged 1,2-diphenylenediboranes derived from 9-chloro-9-borafluorene and ligand exchange reactions

Cyclic 1,2-diphenylenediboranes containing a doubly hydrogen-bridged structure, including 1,2-(2,2^′biphenylylene)diborane(I) and 1,2-(2,2^′biphenylylene)-1,2-diethyldiborane (II), are conveniently prepared by treating 9-chloro-9-borafluorene with NaBH₄ and Na(Et)₃BH, respectively. The reaction mechanism involves an initial Cl-H exchange to form 9-borafluorene containing a reactive 5-member ring diarylborane moiety, which subsequently engages in a facile ring expansion with the in situ formed B-H containing residue (BH₃ or HBEt₂) to result in cyclic 1,2-diphenylenediboranes compounds. The doubly hydrogen-bridged structure shows good thermal stability up to 50 °C. Upon thermal cleavage at higher temperature, all free B-H groups become very reactive involving hydroboration with α-olefin. The complexization study also reveals that this intradiborane moiety forms a 1:2 complex with a strong base, such as pyridine.     

KCC-1 aminopropyl-functionalized supported on iron oxide magnetic nanoparticles as a novel magnetic nanocatalyst for the green and efficient synthesis of sulfonamide derivatives

A new magnetic nanocatalyst (Fe₃O₄@KCC-1-npr-NH₂) was synthesized directly through the reaction of Fe₃O₄@KCC-1 with (3-aminopropyl) triethoxysilane (APTES) using a hydrothermal protocol. Prepared nanocomposite was used as a magnetically reusable nanocatalyst for an efficient synthesis of a broad range of sulfonamide derivatives in water as a green solvent at room temperature and the products are collected by filtration with excellent yields (85–97%). The nanocatalyst could be remarkably recovered and reused after ten times without any significant decrease in activity. This mild and simple synthesis method offers some advantages including short reaction time, high yield and simple work-up procedure.     

Preparation of Polymer-Supported Chiral 1,2-Diamine as an Efficient Ligand for Asymmetric Hydrogenation Catalyst

An enantiopure 1,2-diamine having two phenolic hydroxy groups was synthesized, and attached to chloromethylated poly(styrene) through a benzyl ether linkage. The polymer-supported Ru precatalysts were prepared from the polymeric chiral 1,2-diamine and RuCl₂/BINAP complex. In the presence of t-BuOK the polymeric catalyst system worked well in asymmetric hydrogenation of aromatic ketones in a mixed solvent of 2-propanol and DMF. The insoluble polymeric catalyst was readily separated from the reaction mixture and reused at least several times without loss of the catalytic activity.     

Visible light-mediated photocatalytic bromination of 2-arylimidazo[1,2-a]pyridines using CBr4 as bromine source

Abstract

The photocatalytic bromination of 2-arylimidazo[1,2-a]pyridines is described in this paper. This reaction uses the readily accessible and shelf-stable CBr₄ as a bromine source. This photocatalytic system is shown to serve as a convenient and practical synthetic protocol for the preparation of 2-aryl-3-bromoimidazo[1,2-a]pyridines.     

Koordinationseigenschaften von Carbaboranylchlorophosphanen: Synthese und Molekülstruktur von cis-rac-Molybdäntetracarbonyl{1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaboran(12)}

Coordination Properties of Carbaboranylchlorophosphines: Synthesis and Molecular Structure of cis-rac -Molybdenumtetracarbonyl{1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaborane(12)} Rac-1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaborane(12) ( 1 ) reacts with [Mo(CO)₄(NBD)] (NBD = norbornadiene) after several hours at 50–55 °C to yield cis-rac-[Mo(CO)₄{1,2-(PPhCl)₂C₂B₁₀H₁₀}] ( 2 ). 2 was characterised spectroscopically (¹H, ¹³C, ¹¹B and ³¹P NMR) and by crystal structure determination.     

Preparations of Saturated N‐P‐N Type Secondary Phosphine Oxides and their Applications in Cross‐Coupling Reactions

A series of cyclohexane‐1,2‐diamine ( 3a – 3d ) and benzene‐1,2‐diamine derivatives ( 3e – 3h ) were pre‐ pared. Followed by hydrolysis, the reaction of 3a – 3c with PCl₃ successfully led to the formation of cor‐ responding metastable saturated heteroatom‐substituted secondary phosphine oxides (HASPO 4a – 4c ), a tautomer of the saturated heteroatom‐substituted phosphinous acid (HAPA). Whereas ambient‐stable diamine‐coordinated palladium complexes were obtained, HAPA‐coordinated palladium complexes were not successfully synthesized. The molecular structures of HASPO 4c , Pd(OAc)₂(3a) , PdBr₂(3b) and Pd(OAc)₂(3c) and [Cu(NO₃)(3d)⁺][NO₃ ^? ] were determined by single‐crystal X‐ray diffraction method. Catalysis of in‐situ Suzuki‐Miyaura cross‐coupling reactions for aryl bromides and phenylboronic acid using diamine 3a as ancillary ligand showed that the optimized reaction condition at 60 °C is the combination of 2 mmol % 3a /3.0 mmol KOH/1.0 mL 1,4‐dioxane/1 mmol % Pd(OAc)₂. Moreover, moderate reactivity was observed when using aryl chlorides as substrates (supporting infor‐ mation). When diamine 3d was employed in Heck reaction, good tolerance of functional groups of aryl bromides were observed while using 4‐bromoanisole and styrene as substrates. The optimized condi‐ tion for Heck reaction at 100 °C is 3 mmol % 3d /3.0 mmol CsF/1.0 mL toluene/3 mmol % Pd(OAc)₂. In general, cyclohexane‐1,2‐diamine derivatives exhibited better catalytic properties than those of benzene‐1,2‐diamines.