Sorbate densities on 5A zeolite above and below the critical conditions: n alkane data evaluation and modeling

The sorbate densities of n-alkanes C₁–C₂₀ in 5A zeolite are modeled. For validation of this model, the n-alkane adsorption data for gases and liquids on 5A zeolite is critically evaluated using the concept of sorbate densities. The adsorbed phase critical temperatures appear to occur at a reduced temperature of 0.975 different from the vapor-liquid critical reduced temperatures of 1.0 for C₃ to C₂₀ n-alkanes. For methane and ethane species, the critical adsorbate reduced temperatures T _CAR occur earlier at reduced temperatures of 0.83 and 0.96 respectively. The modified Rackett equation of Spencer and Danner (1972) is satisfactorily used to calculate the adsorbate loading for q _max? below adsorbed phase critical reduced temperature, T _CAR. Above the critical adsorbate reduced temperatures, the saturated loading appears to be constant and equal to 8±1 g/100 gZ for all the alkanes. The data in this region is scarce however, as there are not many isotherms above a T _r of 1.15. However the available isotherms appear to have a fairly equal and constant saturation loading between T _r=T _CAR and T _r=1.652.     

Structural studies on thorium(IV)-titriplex IV-interacted 13X zeolite

A new zeolite derivative has been prepared by interacting Th(IV) and complexone in HCl medium and neutralising with aqueous ammonia. The amorphous and siliceous derivative showed a total mass loss of 29.25% in TG for stepwise dehydration, dehydroxylation and decomposition. Heats of reaction were 1167.6 J g^–1 at 88.7°C and 75.167 J g^–1 at 492.5°C for loss of volatile components and decomposition respectively.²⁹Si and²⁷Al MAS NMR spectra as well as XRD data of the derivative before and after calcination indicate presence of both four-coordinated and six-coordinated Al in varying ratios and the total loss of crystallinity.The author is grateful to Dr. Alan Dyer of the Department of Chemistry and Applied Chemistry, Salford University and to Dr. Jacek Klinowski of the Department of Chemistry, Cambridge University for providing the thermal data and NMR spectra respectively. He also acknowledges the comments received from Dr. N. Suryaprakash of the Sophisticated Instrument Facility, I.I.Sc., Bangalore on the²⁷Al and²⁹Si spectra of the derivatives.     

Probing Cu(I)-exchanged zeolite with CO: DFT modeling and experiment

Addition of CO on Cu-exchanged zeolite was investigated by means of quantum chemical calculations based on density functional theory. The aim of this investigation was to get insights about changes of electronic properties of a copper site with zeolite composition by using a CO probe molecule. Calculated nu(CO) frequency values show that various Si/Al ratios of faujasite zeolite reproduce the expected experimental decrease of the nu(CO) values with decreasing Si/Al ratio. These calculations predict that H/Na ratio variations also induce changes in the nu(CO) values. These results illustrate that different compositions of the zeolite change the electronic properties of copper that are reflected in the nu(CO) frequency values. DFT results showed also that different structures and CO adsorption energies are obtained due to various Si/Al and H/Na ratios of the zeolite. Finally, these calculations evidence the possibility for CO to be connected at the same time to Cu(I) and to a close Na cation, Cu being at site II and Na at site II in Cu(I)-exchanged faujasite. A DRIFT experiment on two samples of faujasite, Cu(28)H(51)NaY and Cu(25)H(0)NaY, supports nu(CO) displacements to higher energy values with increasing H/Na ratio.     

Hydrogen adsorption on a carbon adsorbent with slitlike micropores below and above the critical temperature

Hydrogen adsorption is calculated for model microporous adsorbents with slitlike micropore widths of 0.538, 0.878, and 1.218 nm obtained by the consecutive exclusion of one, two, and three layers of hexagonal carbon from graphite structure taken as a model cell. Calculations are performed using the basic concepts of the theory of volume filling of micropores, Dubinin-Radushkevich equation, and linear adsorption isosteres. For structures with one-and two-layer carbon walls, the calculation is carried out at temperatures of 20, 33, 77, 200, 300, and 400 K and pressures up to 20 MPa. For AC3:5 structure, the maximum hydrogen adsorption amounts to 7.9 wt % at 20 MPa and 300 K. The parameters of adsorbent porous structure are established. Hydrogen adsorption is shown to be governed by the capacity and the energy of adsorption.     

Polyimides from dianhydrides and bis(p-aminophenyl) alkane diamines. I

Polyimides were synthesized from pyromellitic dianhydride (PMDA), 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA), and three different diamines with the following general structure: where R is ethyl, propyl, or isobutyl. The poly(amic acids) obtained had inherent viscosities ranging from 0.30 to 0.93 and were thermally/chemically converted to polyimides. The thermal stability of the polyimides was evaluated by using dynamic thermogravimetric analysis in air. Physical and thermal properties of these polyimides were compared with that obtained by reacting 2,2-bis(4-aminophenyl) propane and PMDA/BTDA.     

垮越临界温度的分子筛吸附: 微孔体积填充理论的适用性

用高真空重量法测定了NaX分子筛对不同吸附质NH3, H2O, C2H5OH等的吸附等温线, 用微孔体积填充理论对吸附等温线进行非线性拟合, 得到满意结果。表明该理论不但可扩展到以静电场为主的吸附体系, 还可适用于吸附温度高于吸附质临界温度的吸附体系。计算结果表明, NaX吸附不同吸附质测得的极限空腔体积基本相同, 且与结构分析得到的空腔体积一致, 进一步表明微孔体积填充理论对该体系的适用性。计算了各种吸附质的极限吸附量, 以及某填充度下的蚊分吸附热随着温度的变化趋势。可为固体吸附式制冷系统的设计与制造提供理论依据及有关掺数。     

Water adsorption on zeolite 13X: comparison of the two methods based on mass spectrometry and thermogravimetry

Two different experimental methods have been used for studying equilibrium adsorption of water vapour on zeolite 13X based on thermogravimetry and a novel technique using mass spectrometry. Good agreement can be found between experimental data of the adsorption isobars from these two methods. Also the isosteric heat of adsorption of this system has been determined from the equilibrium data. Water adsorption has been measured under a variety of operation conditions of the cooling systems, i.e. pressures from 12.28 to 73.84 mbar and temperatures from 50 to 230 °C.     

Near-critical adsorption of CO2 on 13X zeolite and N2O on silica gel: lack of evidence of critical phenomena

The excess adsorption of CO₂ on 13X zeolite and of N₂O on silica gel has been studied at high pressure using a magnetic suspension balance, i.e. a gravimetric method. Recently, a detailed study on the density distribution in the measuring cell of the magnetic suspension balance showed that a proper approach to thermostatting the unit should be used in order to obtain reliable and accurate excess adsorption measurements. This is particularly important in the vicinity of the critical point of the fluid, where the density is strongly dependent on pressure and temperature. In the past, several effects were observed in our laboratory when measuring near-critical adsorption on 13X zeolite and on silica gel, namely critical adsorption and critical depletion. In the present study, these effects have been checked using the balance in the new thermostatting configuration, and the conclusion can be drawn that the accuracy of the measurement is not sufficient to prove that they indeed occur. More accurate adsorption data for the two systems have been measured and reported.     

CO2 sorption in poly(ethylene terephthalate) above and below the glass transition

High-pressure CO₂ sorption data in semicrystalline poly(ethylene terephthalate) (PET) are presented for temperatures ranging from 25 to 115°C. The results are described by Henry's law above the glass-transition temperature of PET, while a dual-mode sorption model comprised of a Henry's law and a Langmuir isotherm applies in the glassy state. The disappearance of the Langmuir capacity of the polymer above T_g presumably results from the elimination of regions of localized lower density which are frozen into the glass upon quenching from the rubbery state. Exposure of PET to a high CO₂ pressure produced a systematic variation in the apparent sorption equilibria. Correlation of the Langmuir capacity of PET with the dilatometric parameters of the polymer provides a useful framework for understanding the origin of the Langmuir sorption mode and for interpreting annealing and conditioning effects in glassy polymers.     

Thermo-physical properties measurements of hygroscopic and reactive material (zeolite 13X) for open adsorptive heat storage operation

Journal of Thermal Analysis and Calorimetry - The determination of the thermo-physical properties (density, specific heat capacity, and thermal conductivity) of hygroscopic and reactive solid...     

Chromium (VI) ion adsorption features of chitosan film and its chitosan/zeolite conjugate 13X film

This research evaluated the importance of the adsorption properties of chitosan a chitosan/zeolite conjugate film for the removal of Cr(VI) ions from solutions in the 5-260 mg/L concentration range, when the pH was adjusted to 4.0 and 6.0. The uptake capacities of the films formed by chitosan and by the chitosan/zeolite conjugate were calculated by mass balance. The equilibrium isotherms were fitted to the Langmuir, Freundlich and Redlich-Peterson models. The chitosan film seems to be a good sorbent for Cr(VI) at pH 4, but its physical instability suggests the need for a more resilient support. Due to this fact zeolite was added to the chitosan matrix in solution and a chitosan/zeolite (CS/Zeo) film was thus formed. The solubility of the film and the characterization of the different matrices by FTIR, TGA and X-Ray showed that a cross-linked structure was formed between the chitosan and zeolite and the solubility of the film increased. In this study, the low manufacturing cost of the CS/Zeo matrix, the good uptake of Cr(VI) at acidic pH (17.28 mg/g) and the non desorption of Cr(VI) from the film in water suggests this combination should be tested in industrial environment.     

Pseudo interpenetrating polymer networks and interpenetrating polymer networks of zeolite 13 X and polystyrene and poly(ethyl acrylate)

Free-radical polymerization of liquid styrene and ethyl acrylate with or without ethylene dimethacrylate crosslinker in the presence of zeolite 13 X produces interpenetrating polymer networks (IPN's) or pseudo IPN's in which polymer chains have grown and filled internal pores of the zeolite. A variety of methods of characterization including, solubility studies, differential scanning calorimetry (DSC), scanning electron microscopy (SEM), ¹³C solid-state nuclear magnetic resonance (NMR) and small-angle X-ray scattering (SAXS) provide supporting evidence for this. The polymer chains within the internal pores do not exhibit a bulk glass transition. This is part of a larger study of the glass transition of polymers confined to cavities or pores of various sizes.     

SO(x) storage materials under lean-rich cycling conditions. Part I: Identification of transient species

The SO(x) uptake of second generation sulfur trapping materials was studied by in situ IR spectroscopy under lean-rich cycling conditions. The combination of advanced chemometric methods including generalized 2D correlation analysis, 2D sample-sample correlation analysis, and multivariate curve resolution with alternating least squares allowed the detection of the species involved in the storage process. The formation of the bulk sulfate species was always accompanied by the consumption of carbonates. The reduction of a transient surface sulfate species was identified as the key parameter in the storage process under dynamic conditions. Three distinct reaction regimes were differentiated on the industrial materials under SO(x) trapping conditions being imperceptible from conventional spectra.     

Transient and steady-state permeation in poly(ethylene terephthlate) above and below the glass transition

Transient and steady-state permeation data are reported for CO₂ in semicrystalline poly(ethylene terephthalate) for temperatures ranging from 25 to 115°C over the pressure range from 1 to 20 atm. The pressure dependency of the time lag and permeability disappears completely above the glass transition of the polymer, and Fick's law with a concentration-independent diffusion coefficient applies. In the glassy state, a concentration-dependent diffusion coefficient is necessary to describe the data. The form of this concentration dependence is described well by the partial immobilization transport model that attributes a different mobility to each of the two populations of sorbed gas which exist in local equilibrium with each other in glassy polymers. The importance of reporting the pressure used in transport experiments involving glassy polymers is emphasized by comparing the difference in the activation energy of the apparent diffusivity calculated from the measured time lag at 1 and 20 atm. Also, the magnitude of the observed slope discontinuity at T_g in Arrhenius plots of these apparent diffusities is shown to be a function of the upstream pressure used in the experiment. The independently measured time lags are compared with the predicated values calculated from various transport models and found to be described best by the partial immobilization model.     

Ba deposition and oxidation on theta-Al2O3/NiAl(100) ultrathin films. Part I: Anaerobic deposition conditions

Room-temperature Ba deposition on an oxygen-terminated theta-Al(2)O(3)/NiAl(100) ultrathin film substrate under ultrahigh vacuum (UHV) conditions is studied using X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and temperature programmed desorption (TPD) techniques. In addition, Ba oxidation by the ions of the alumina substrate at 300 K < T < 1200 K in the absence of a gas-phase oxidizing agent is investigated. Our results indicate that at room temperature Ba grows in a layer-by-layer fashion for the first two layers, and Ba is partially oxidized. Annealing at T < 700 K results in further oxidation of the Ba species, whereas annealing at higher temperatures leads to loss of Ba from the surface via desorption and subsurface diffusion.     

Hydrogen dissociation on Cu(111): the influence of lattice motion. Part I

We have studied the effect of lattice displacement on the interaction of H(2) with the Cu(111) surface using the Specific Reaction Parameter (SRP) approach to Density Functional Theory (DFT). We have systematically investigated how the motion of the surface atoms affects some features of the Potential Energy Surface (PES), such as the dissociation barrier height and the barrier geometry corresponding to some representative reaction pathways, and the anisotropy of the potential at these geometries. This analysis has allowed us to identify the surface degrees of freedom that are likely to be most relevant for H(2) dissociation. In particular, we have found that the lattice coordinate displacements that have the largest effect on the H(2)/Cu(111) DFT-SRP barrier heights and locations concern the motion of the 1st layer and 2nd layer Cu atoms in the Z direction, and motion of the 1st layer atoms in the directions parallel to the surface. Whereas the first degree of freedom mostly affects the barrier geometry, the second and third motions can lower or raise the barrier height. The latter effect cannot be described with the usual surface oscillator dynamical models employed in the past to include surface motion, and its dynamical influence on the dissociative adsorption needs to be further investigated.