Determination of fission product ruthenium by isotope dilution mass spectrometry

Isotope dilution mass spectrometry using enriched isotope⁹⁶Ru as a spike was applied to the determination of ruthenium as a fission product. Ruthenium in the solution was oxidized to RuO₄ by Ce/IV/ and separated from coexisting metal elements by distillation. Silica-gel technique was employed to enhance ion current of ruthenium in the mass spectrometric measurement. The lower detection limit was 0.005 g ml^–1 and the relative standard deviations /n=3/ for 1.2 and 0.05 g ml^–1 of ruthenium were 0.2 and 0.5%, respectively.     

Differential pulse voltammetric methods for the simultaneous estimation of uranium-iron and uranium-cadmium mixtures in solution

Differential pulse voltammetric methods have been developed for the simultaneous estimation of the constituents of uranium-iron and uranium-cadmium mixtures in solution. A mixture of 1M H₃PO₄–1M KH₂PO₄ (with a pH1.5), was found to be the most ideal supporting electrolyte for both methods, among many that were evaluated for their suitability. In uranium-iron mixtures the calibration for iron was found to be linear up to 150 g ml^–1 (r²=0.9986), while that of uranium up to 500 g ml^–1 (r²=0.999). Iron at 6.7 g ml^–1 level could be determined in the presence of 800 fold uranium (wt/wt) without significant interference. Uranium at 21 g ml^–1 level could be analyzed with 5-fold iron (wt/wt). This upper limit of iron was due to the precipitation of iron as phosphate. In the case of uranium — cadmium mixtures, cadmium calibration for cadmium was found to be linear up to 1300 g ml^–1 (r²=0.9993). Concentration levels of 4.6 g ml^–1 Cd could be determined at a 500-fold excess (wt/wt) of uranium. Uranium calibration was linear up to 500 g ml^–1 (r²=0.999) and 21 g ml^–1 uranium could tolerate up to a 1000-fold excess of cadmium (wt/wt). Both procedures could tolerate 10 g ml^–1 levels of metal ions, such as chromium, copper, manganese, molybdenum and vanadium.     

Fourth-derivative spectrophotometric determination of neodymium in mixed rare earths with methyl thymol blue and cetylpyridinium chloride

A sensitive and selective method is described for the determination of neodymium in mixed rare earths using fourth-derivative spectrophotometry. The method is based on the absorption spectra of 4f electron transitions of the complex of neodymium with methyl thymol blue and cetylpyridinium chloride. The influence of various instrumental parameters and reaction conditions for maximum colour development are investigated. The calibration curve is linear over the range 0–3.5 g ml^–1 neodymium. The relative standard deviation for determination of 1.4 g ml^–1 neodymium (n = 7) is 1.6%. The detection limit (signal-to-noise ratio = 3) is 0.2 g ml^–1.     

Spectrofluorimetric determination of nucleic acids as 8-hydroxyquinoline/ yttrium ternary complexes

The formation of nucleic acids/8-hydroxyquinoline/yttrium(III) ternary complexes and their fluorescent properties have been studied. The nucleic acids studied include native and thermally denatured calf thymus DNA, fish sperm DNA and yeast RNA. In the range of pH 7.6–8.5, controlled by NH₃-NH₄C1 buffer, ternary complexes are formed that fluoresce at different wavelengths with different nucleic acids. Based on the fluorescence reactions, sensitive spectrofluorimetric methods for nucleic acids are proposed. In optimal conditions, the calibration curves were linear in the range 0.5–4.0 gml^–1 for calf thymus DNA, 0.5–2.5 g ml^–1 for fish sperm DNA and 0.5–4.0 g ml^–1 for yeast RNA. The limits of determination (3 ) were 0.030 g ml^–1 for calf thymus DNA, 0.020 g ml^–1 for fish sperm DNA and 0.090 g ml^–1 for yeast RNA. Corresponding to the interferences of coexisting substances, six synthetic samples were constructed and the results of determination were satisfactory.     

Glycosylation of triterpene alcohols of the lupane series

The glycosylation of lupeol, allobetulin, 3-28-dihydroxy-18-lupene, 3-28-dihydroxy-18, 19-epoxylupane and of betulin monoacetates in acetonitrile with mercury cyanide has been studied. The 3- and 28-mono- and the 3,28-di-O--D-glucopyranosides of 3-28-dihydroxy-18-lupene and of 3-28-dihydroxy-18, 19-epoxylupane have been synthesized for the first time. Preparative methods for the synthesis of glucosides of lupeol, of allobetulin, and of betulin 3- and 28-monoacetates are proposed.Pacific Ocean Institute of Bioorganic Chemistry, Far Eastern Branch, USSR Academy of Sciences, Vladivostok. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 212–217, March–April, 1988.     

Studies of the reactions of Br(2P3/2) and Br(2P1/2) with SiH4

Photobromination of SiH₄ under uv-irradiation at various wavelengths has been studied. Rate constants for the elementary reactions Br(²P_3/2)+SiH₄HBr+SiH₃ (k=3.2×10^–11 exp(–21.8±2.5)/RT, cm³/s) and Br^* (²P_1/2)+SiH₄HBr+SiH₃ (k^*=(3±1)×10^–13 cm³/s) have been determined in the temperature range from 300 to 415 K.

---

- . Br(²P_3/2)+SiH₄HBr+SiH₃, k=3,2×10^–11 exp (–21,8±2,5)/RT ³/ Br^*(²P_1/2)+SiH₄HBr+SiH₃, k^*=(3±1)×10^{–13 3}/ 300–415 K.

     

Solid-Phase Extraction and Spectrophotometric Determination of Trace Amounts of Mercury in Natural Samples

A sensitive and selective solid phase spectrophotometric method for the determination of trace amounts of inorganic mercury is described. Hg²⁺ was sorbed on a silica gel-packed column as an Hg²⁺–N,N-bis(2-mercaptophenyl)ethanediamide (H₂L) complex. The Hg²⁺ complex was eluted from the column using 7mL of acetone. Various parameters including pH, column flow rate, and ligand concentration were optimized. The complex was found to obey Beers law from 2.3 to 73.7µgmL^–1 within the optimum range when the preconcentration factor was two. The effective molar absorption coefficient at 523nm was 1.17×10³Lmol^–1cm^–1 at 523nm. The concentration limits in Beers law dropped from 0.09 to 2.95µgmL^–1 within the optimum range when the preconcentration factor was 50. The relative standard deviation at a concentration level of 5µgmL^–1 Hg²⁺ (9 repetitive determinations) was 1.6%. The detection limits are 0.34µgmL^–1 and 0.015µgmL^–1 when the preconcentration factors are 2 and 50, respectively. The method has been used for routine determination of trace levels of Hg²⁺ in natural waters. The potential application of this method for the removal of Hg²⁺ from natural samples (sea water and lake water) spiked with 100ngmL^–1 of Hg²⁺ was studied. In order to validate the proposed method, LGC 6156 (harbour sediment – extractable metals) was analysed by this method. The results proved that excellent extraction of Hg²⁺ from both natural water samples was obtained by solid phase extraction using N,N-bis(2-mercaptophenyl) ethanediamide.     

The composition of volatile and particulate hydrocarbons in urban air

Summary The hydrocarbon composition of the particle and gas phases in the urban atmosphere has been studied by filtration and parallel adsorption on active charcoal and polyurethane foam (PUF). Gas chromatography (GC) and GC coupled to mass spectrometry (GC-MS) have been used for the analysis of the organic matter extracts obtained with each system. In the case of the particle and PUF samples these extracts were fractionated into aliphatic and aromatic compounds. This approach has allowed to identify up to 247 hydrocarbon molecules showing that C0–C5 alkylbenzenes are the major compounds in the charcoal extracts whereas C14–C23 n-alkanes, C0–C4 alkylnaphthalenes, C0–C4 alkylbiphenyls and C3–C5 alkylbenzenes are those predominantly found in the PUF materials. The particles essentially contain C17–C38 n-alkanes and parent polycyclic aromatic hydrocarbons (PAH). These qualitative differences are paralleled by a progressive concentration decrease from the more to the less volatile hydrocarbons. Thus, the total charcoal extracts average 80 g/m³, the PUF compounds represent 4 /m³ and the particle hydrocarbons 0.7 g/m³. These latter airborne materials are essentially composed of petrogenic residues 0.6 g/m³ (aliphatic fraction) whereas the pyrolytic PAH only involve 0.08 g/m³.     

High-Performance Liquid Chromatographic Determination of Quinolizidine Alkaloids in Radix Sophora Flavescens Using Tris(2,2′-Bipyridyl)Ruthenium(II) Electrochemiluminescence

Electrogenerated chemiluminescences (ECLs) of quinolizidine alkaloids including matrine (MT), sophocarpine (SC), and sophoridine (SRI) are studied. The light emission is caused by an electro-oxidation reaction between Ru(bpy)₃²⁺ and the tertiary amino group on the alkaloid compounds. A thin-layer flow cell equipped with a glassy carbon disk electrode (22.1mm²) at the potential of ⁺1.30V (vs. Ag/AgCl) was applied for ECL observation. MT, SC and SRI were separated and quantitatively determined within 25min by an ODS-80 Ts reversed-phase column with a mobile phase containing 80mmolL^–1 NaH₂PO₄–K₂HPO₄ buffer+acetonitrile (7:3)+40mmolL^–1 sodium dodecyl sulfate (pH 6.5). The determination limit at an S/N of 3 ranged from 3×10^–9gmL^–1 for MT, 6×10^–9gmL^–1 for SC and 1×10^–9gmL^–1 for SRI. The recoveries are from 92 to 108%, with repeatability ranging from 1.3 to 4.5% (relative standard deviation). The method was successfully applied to the determination of quinolizidine alkaloids in Sophora flavescens samples.     

Structural studies and diffusion measurements of water-swollen cellophane by NMR imaging

NMR imaging and spatially resolved diffusometry have been used to study the distribution of water within swollen cellophane and measure its diffusion coefficient. Water concentration and diffusion coefficient were found to be essentially constant across most of the film thickness. However, significantly slower diffusion was indicated for water near the film surface (D=0.5×10^–9m²s^–1) compared with water in the centre of the film (D=0.88×10^–9m²s^–1). This was also reflected in lower T ₂ values at the edge of the film indicating water with more restricted motion. These observations were interpreted in terms of dense surface regions of cellulose (skin) over a more porous interior (core).     

Evaluation of quantum yields in the presence of an absorbing additive

A method is proposed for the evaluation of quantum yields of photochemical reactions studied in the presence of absorbing additives using cylindrical sample tubes.

---

.

     

Method to affect catalytic properties of low-temperature transition metal oxides

A method to affect the catalytic properties of low-temperature oxide catalysts by their synthesis through hydroxide compounds of the required composition and structure is suggested.

---

.

     

Adsorptive Catalytic Voltammetry of Physcion in the Presence of Dissolved Oxygen at a Carbon Paste Electrode

A novel electroanalytical method for the determination of physcion is described for the first time. Physcion yields an adsorption catalytic voltammetric peak at –0.74V (vs. SCE) in 0.4molL^–1 NH₄Cl–NH₃·H₂O buffer solution (pH 10.5) at a carbon paste electrode (CPE). The experimental results indicated that physcion is efficiently accumulated at a CPE by adsorption. In the subsequent potential scan, physcion was reduced to a homologous anthrahydroquinone compound. The compound was then immediately oxidized to physcion by the dissolved oxygen in the solution, and then physcion was again reduced at the CPE. As a result, a cyclic catalytic reaction was established. The second-order derivative peak current is proportional to the physcion concentration in the ranges of 2.0×10^–104.0×10^–9molL^–1 (accumulation 90s) and 4.0×10^–92.0×10^–8molL^–1 (accumulation 60s). The limit of detection is 8×10^–11molL^–1 (S/N=3) for a 120s accumulation time. The method was applied to the direct determination of physcion in the medicinal plant polygonum multiflorum Thumb with satisfactory results.     

A new steroid saponin from the leaves ofYucca aloifolia

A new steroid saponin has been isolated from the air-dry leaves ofYucca aloifolia L., and it has been shown to be (25R)-5-spirostan-3-ol O-D-glucopyranosyl-(1 2)-D-galactopyranoside. The substance melts at 302–303°C []D²⁰ –27.2, (c 1.0; CHCl₃).I. G. Kutateladze Institute of Pharmacochemistry, Academy of Sciences of the Georgian SSR, Tbilisi. Translated from Khimiya Prirodnikh Soedinenii, No. 6, pp. 744–747, November–December, 1984.     

Thermal studies on aluminium substituted CuCr2O4

Thermal studies on aluminium substituted copper chromite spinel oxide, CuCr_2–x Al _x O₄ (x=0.2 tox=0.8) by DSC show that with 20% replacement of Cr by Al, the phase transition temperature of the spinel is lowered but on further increasing the percentage of Al the phase transition temperature becomes higher than that of CuCr₂O₄. The enthalpy change for phase transition however decreases gradually with increasingx.

---

Zusammenfassung Mittels DSC wurde ein aluminium-substituiertes Kupferchromitspinelloxid, CuCr_2–x Al _x O₄ mitx=0,2-0,8 thermisch untersucht. Wird 20% des Cr durch Al ersetzt, sinkt die Phasenübergangstemperatur ab, bei weiterem Anwachsen des Aluminiumgehaltes steigt sie jedoch über die von CuCr₂O₄ hinaus an. Die Enthalpieänderung des Phasenüberganges steigt mit anwachsendemx allmählich an.

---

CuCr_2–x Al _x O₄ (x=0,2–0,8) , 20% , , , , CuCr₂O₄. , x.

---

---

The authors thank Mrs P. P. De of Rubber Technology Centre, Indian Institute of Technology, Kharagpur for her help with the DSC studies.     

Reactivity of coordinated O2? towards. One-electron oxidants

Ion-radical complexes Ti(IV) (O ₂ ^– ) are unreactive towards most oxidants except Ce(IV) and Cr₂O ₇ ^2– . The one-electron redox potential for the O_{2 coord.}/O _{2 coord.} ^– couple lies between 1 and 1.6 V.

---

- O ₂ ^– Ti(IV) , Ce(IV) Cr₂ O ₇ ^2– . - O_{2 .}/O ₂ ^– . 1 1,6 .

     

Kinetics of formation,dissociation and equilibrium constants of pentacyanoaquoruthenate(II) with heterocycles

The kinetics of formation and dissociation reactions of [Ru(CN)₅L]^3– with a series of heterocyclic ligands were studied in aqueous media. In this presence of an excess of heterocycle, the observed second order rate constants were calculated from the k_obs versus [ligand] plot at =0.100m NaClO₄. Activation parameters for the formation reactions (H=28±7kJmol^–1 and S=140±35JK^–1mol^–1) are comparable for all systems, indicating a common mechanism. The kinetics of exchange of coordinated heterocycles for 1,3,5-triazine yielded a rate saturation typical of a limiting dissociative mechanism. Activation parameters of the limiting first order specific rate of dissociation reactions were H=85±7kJmol^–1 and S=18±4JK^–1mol^–1. Equilibrium constants were calculated from the second order rates of formation and pseudo-first order rates of dissociation reaction.     

Coke formation during hydroisomerization and hydrocracking of normal paraffins on physically mixed catalysts containing hydrogen-mordenite

Coke formation on physically mixed catalysts containing hydrogen-mordenite and 0.6 wt. % platinum-alumina is found to be directly related to the hydrocracking activity of the catalyst for n-hexane, n-octane and n-decane. No clear relationship is found between coke formation and hydroisomerization activity.

---

, - 0,6% . % -, - -. .