Separation of fifteen quinolones by high performance liquid chromatography: application to pharmaceuticals and ofloxacin determination in urine

A simple chromatographic method is described for assaying 15 quinolones and fluoroquinolones (pipemidic acid, marbofloxacin, enoxacin, ofloxacin, norfloxacin, ciprofloxacin, danofloxacin, lomefloxacin, enrofloxacin, sarafloxacin, difloxacin, oxolinic acid, nalidixic acid, flumequine and piromidic acid), in urine and pharmaceutical samples. The determination was achieved by LC using an RP C18 analytical column. A mobile phase composed of mixtures of methanol-ACN-10 mM citrate buffer at pH 3.5 and 10 mM citrate buffer at pH 4.5, delivered under an optimum gradient program, at a flow rate of 1.5 mL/min, allows to accomplish the chromatographic separation in 26 min. For detection, diode-array UV-Vis at 280 nm and fluorescence detection set at excitation wavelength/emission wavelength: 280/450, 280/ 495, 280/405 and 320/360 nm were used. Detection and quantification limits were between 0.3-18 and 0.8-61 ng/mL, respectively. The method was validated in terms of interday (n = 6) and intraday (n = 6) precision and accuracy. The procedure was successfully applied to the analysis of human and veterinary pharmaceuticals. Also, ofloxacin was determined in human urine samples belonging to a patient undergoing treatment with this active principle, among others.     

Fourier transform infrared spectroscopy with a sample deposition interface as a quantitative detector in size-exclusion chromatography

Micellar electrokinetic capillary chromatography was developed to analyze plant hormones including gibberellic acid, abscisic acid, indole-3-acetic acid, alpha-naphthaleneacetic acid, 2,4-dichlorophenoxyacetic acid, kinetin-6-furfurylaminopurine and N6-benzyladenine. The influences of some crucial parameters including buffer concentration, pH value, micelle concentration and applied voltage on electrophoretic separation were investigated. Under optimum conditions (50 mM borate as the running buffer containing 50 mM sodium dodecylsulfate, pH 8.0; separation voltage: -15 kV; injection: hydrodynamic injection, 5 s at 50 mbar; temperature: 25 degrees C), a complete separation of seven plant hormones was accomplished within 30 min. Emphasis was placed on improving detection sensitivity in order to detect small amounts of hormones in plant tissue. Multiple wavelength detection and expanded bubble cell capillary were used with enrichment factors of 2 and 3, respectively. In addition, an on-line concentration method of large volume sample stacking was designed. Enrichment factors of up to approximately 10-600 were achieved for these hormones with detection limits down to 0.306 ng/ml. The method was successfully applied to analyzing abscisic acid in flowers of transgenic tobacco.     

Separation of organic and inorganic arsenic species by capillary electrophoresis using direct spectrophotometric detection

Capillary electrophoresis (CE) with UV detection was used for the determination of arsenite, arsenate, monomethylarsonic acid, dimethylarsinic acid, p-aminophenylarsonic acid, 4-hydroxy-3-nitrobenzenearsonic acid, 4-nitrophenylarsonic acid, phenylarsonic acid, and phenylarsine oxide. The electrophoretic mobilities of these anionic species were determined in a 20 mM phosphate buffer in a pH range from 4 to 11, which established pH 10 as the optimum for the separation. The target analytes were then separated in a fused-silica capillary using 20 mM NaHCO(3)-Na(2)CO(3) buffer, pH 10, as electrolyte and detected at 192 nm. Both normal- and reversed electroosmotic flow (EOF) separation modes were investigated and in the latter case, poly(diallydimethylammonium chloride) (PDDAC), was used for dynamic coating of the capillary and to provide a stable and reproducible reversed EOF (relative standard deviation RSD, 0.39%). The influence of electrolyte pH and composition, applied voltage, as well as EOF reversal protocols upon the method performance criteria were investigated. The optimised method provided limits of detection for the target analytes of 1.62, 6.22, 1.45, 1.83, 0.34, 0.40, 0.40, 0.18, and 0.30 mg/L As, respectively. Linearity was obtained in the range of 0.5-40 mg/L As (for aryl compounds) and from 5-100 mg/L As (for the remaining analytes). Reproducibility of peak areas was in the range of 0.8-5.5% RSD. The method was applied to the determination of four aryl arsenic compounds used as additives in animal feed. Analytes were extracted with 40 mM hydrochloric acid - acetonitrile 4:1 v/v, and then cleaned up by passing through a C(18) solid-phase extraction cartridge before analysis by CE with detection at 200 nm. Recoveries for the four analytes were in the range of 78.8-108.3%.     

Separation of perfluorocarboxylic acids using capillary electrophoresis with UV detection

A capillary electrophoretic method with UV detection for separation and quantitation of perfluorocarboxylic acids (PFCAs) from C6-PFCA to C12-PFCA has been developed. The optimization of measurement conditions included the choice of the most appropriate type and concentration of buffer in the background electrolyte (BGE), as well as the type and the content of an organic modifier. The optimal separation of investigated PFCAs was achieved with 50 mM phosphate buffer and 40% isopropanol in the BGE using direct UV detection. The optimum wavelength for direct UV detection was optimized at 190 nm. For indirect detection, several chromophores were studied. Five mM 3,5-Dinitrobenzoic acid (3,5-DNBA) in 20 mM phosphate buffer BGE and indirect UV detection at 280 nm gave the optimal detection and separation performance for the investigated PFCAs. The possibility of on-line preconcentration of solutes by stacking has been examined for indirect detection. The detection limits (LODs) determined for direct UV detection ranged from 2 microg/mL for C6-PFCA to 33 microg/mL for C12-PFCA. The LODs obtained for indirect UV detection were comparable to those obtained for direct UV detection.     

Analysis of colistin sulfate by capillary zone electrophoresis with cyclodextrins as additive

A method for the quantitative analysis of colistin sulfate by capillary zone electrophoresis is described. Since colistin components have five free amino groups, they tend to adsorb onto the capillary wall and cause peak tailing. It was found that triethanolamine (TEA)-phosphate buffer at pH 2.5 was useful to reduce such adsorption. Methyl-beta-cyclodextrin (M-beta-CD) and 2-propanol (IPA) were found necessary for selectivity enhancement. In order to optimize the separation parameters and predict the method robustness, a central composite design was performed including three variables, namely concentration of M-beta-CD, TEA, and IPA. The effects of capillary length and applied voltage on separation were also investigated. The optimal conditions established were: 140 mM TEA-phosphate buffer containing 5 mM M-beta-CD and 6% v/v IPA, a capillary with 55 cm total length (50 microm inner diameter, 47 cm from inlet to detection window) and 24 kV applied voltage. The method was found to be robust when the variables were changed in the following range: 4-6 mM M-beta-CD, 5-7% v/v IPA, and 130-150 mM TEA. Further, the linearity, limit of detection (LOD), and limit of quantitation (LOQ), as well as repeatability for both colistin A and B were examined and three commercial samples were quantitatively analyzed.     

Chiral capillary electrophoretic resolution of baclofen, gabaergic ligand, using highly sulfated cyclodextrins

Using cyclodextrin-capillary zone electrophoresis (CD-CZE), baseline separation of baclofen, a potent GABA(B) agonist; was achieved. A method for the enantioresolution of this gamma-aminobutyric acid (GABA) and determination of enantiomeric purity was developed using CDs (highly sulfated-CD or highly S-CD) as chiral selectors and capillaries dynamically coated with polyethylene oxide (PEO). Operational parameters, such as the nature and concentration of the chiral selectors, buffer concentration, organic modifiers, and applied voltage, were investigated. The use of charged CDs provides a driving force in the opposite direction of the positively charged baclofen in the running buffer and enantiomeric resolution by inclusion of compounds in the CD cavity. Highly S-beta-CD was found to be the most effective complexing agent, allowing good enantiomeric resolution. The complete resolution was obtained using 25 mM phosphate buffer, pH 2.5, containing 3% w/v highly S-beta-CD at 25 degrees C with aN applied field of 0.40 kV/cm. The apparent association constants of the inclusion complexes were calculated. This optimized method was validated in terms of repeatability and limits of detection (0.13 microg x mL(-1)) and quantification. The migration order was determined.     

Capillary electrochromatographic analysis of aliphatic mono- and polycarboxylic acids

The parameters influencing the electrochromatographic separation of aliphatic organic acids in a capillary column with a wall-coated macrocyclic polyamine have been studied. Indirect detection using chromate, pyromellitate, trimellitate, o-phthalate, benzoate and acetate as background electrolytes has been tested. A complete separation of polyprotic acids could be achieved with pyromellitate buffer (7.5 mM, pH 6.5), and satisfactory results for the simultaneous separation of monoprotic acids and polyprotic acids were found using a capillary column of 70 cm (50 cm effective length)x75 microm inner diameter, electrokinetic injection (-10 kV, 10 s), benzoate buffer (6 mM, pH 4.6), separation voltage of -10 kV, and detection at 220 nm. For the separation of the geometric isomers fumarate and maleate, acetate buffer was found the best choice among the background electrolytes tested. The method so established has been applied to the determination of organic acids in soy sauce, brandy, lemon juice, spinach juice and cigarette. From the retention behavior, it was found that the separation mechanism on the bonded phase was influenced by the macrocyclic effect, electrostatic attraction, hydrogen bonding, van der Waals forces, and anion exchange, in addition to the differences in electrophoretic mobility.     

Dodecyl thioglycopyranoside sulfates: novel sugar-based surfactants for enantiomeric separations by micellar electrokinetic capillary chromatography

Four novel chiral anionic surfactants having carbohydrate hydrophilic heads, sodium n-dodecyl 1-thio-beta-D-glucopyranoside 6-hydrogen sulfate (6-betaGlcD), sodium n-dodecyl 1-thio-beta-L-glucopyranoside 6-hydrogen sulfate (6-betaGlcL), sodium n-dodecyl 1-thio-beta-L-fucopyranoside 3-hydrogen sulfate (3-betaFucL), and sodium n-dodecyl 1-thio-alpha-L-rhamnopyranoside 3-hydrogen sulfate (3-alphaRhaL), were synthesized by selective sulfation of the corresponding thioglycosides. Their CMC determined by fluorescence using pyrene as a probe in water was 1.3-2.7 mM. These surfactants found to be useful as chiral selectors for enantiomeric separation by MEKC. The enantiomeric separation was optimized with respect to pH, buffer concentration, and surfactant concentration. Under the optimized conditions (50 mM phosphate buffer at pH 6.5, 30 mM surfactant, 20 kV), the enantiomeric separations of five dansylated amino acids (Dns-AAs) were achieved within approximately 20 min with the migration order of Val相似文献   

Rapid and selective micellar electrokinetic chromatography for simultaneous determination of amikacin, kanamycin A, and tobramycin with UV detection and application in drug formulations

A simple and selective micellar electrokinetic chromatography (MEKC) with UV detection is described for simultaneous determination of amikacin, tobramycin, and kanamycin A, performed in Tris buffer (180 mM; pH 9.1) with 300 mM sodium pentanesulfonate (SPS) as an anionic surfactant. Under this condition, good separation with high efficiency and the required short analysis time is achieved. The linear ranges of the method for the determination of amikacin, tobramycin, and kanamycin A were 0.1-0.5 mg / mL, 0.4-2.0 mg / mL, and 0.4-2.0 mg / mL, respectively; the detection limits (signal-to-noise ratio = 3; injection, 0.5 psi 5 s) were 0.08, 0.2, and 0.2 mg / mL, respectively. The small amount of sample required and the expeditiousness of the procedure allow content uniformity to be determined in individual commercial products.     

Capillary electrophoresis speciation of chromium in leather tanning liquor

We present a method for the speciation of chromium by capillary electrophoresis. Cr(III) was complexed with diethylenetriaminepentaacetic acid (DTPA) to form a negatively charged complex. Using 20 mM phosphate buffer of pH 8 containing 0.5 mM tetradecyltrimethylammonium hydroxide (TTAOH) at a separation voltage of -15 kV, both forms of chromium CrDTPA(2-) and CrO(4) (2-) were separated in less than 6 min. Direct UV detection at 214 nm was used. The effect of the presence of interfering ions was investigated. The application of the developed method to speciation of chromium in tanning liquor is demonstrated. The obtained results have shown a good correlation with those of flame atomic absorbance spectrometry (FAAS), inductively coupled plasma-mass spectrometry (ICP-MS) and UV/VIS spectrophotometry.     

Simultaneous determination of inorganic and organic anions,alkali, alkaline earth and transition metal cations by capillary electrophoresis with contactless conductometric detection

Simultaneous separation of up to 22 inorganic and organic anions, alkali, alkaline earth and transition metal cations was achieved in less than 3 min in the capillary electrophoresis system with contactless conductometric detector. The sample was injected from both capillary ends (dual opposite end injection) and anionic and cationic species were detected in the center of the separation capillary. The parameters of the separation electrolyte, such as pH, concentration of the electrolyte, concentration of complexing agents and concentration of 18-crown-6 were studied. Best results were achieved with electrolytes consisting of 8 mM L-histidine, 2.8 mM 2-hydroxyisobutyric acid, 0.32 mM 18-crown-6 at pH 4.25 or 9 mM L-histidine, 4.6 mM lactic acid, 0.38 mM 18-crown-6 at pH 4.25. Other electrolytes containing complexing agents such as malic or tartaric acid at various concentrations could also be used. The detection limits achieved for most cations and anions were 7.5 - 62 micro gL(-1) except for Ba2+ (90 micro gL(-1)), Cd 2+, Cr 3+ and F- (125 micro gL(-1)), and fumarate (250 micro gL(-1)). The repeatability of migration times and peak areas was better than 0.4% and 5.9%, respectively. The developed method was applied for analysis of real samples, such as tap, rain, drainage and surface water samples, plant exudates, plant extracts and ore leachates.     

Macrocyclic polyamine as a selective modifier in a bonded-phase capillary column for the electrophoretic separation of aromatic acids.

The use of a macrocyclic polyamine, 28[ane]-N6O2, as a selective modifier in a bonded-phase capillary column for the electrophoretic separation of 14 aromatic acids is described. Parameters that affect the performance of the separations, such as the type of buffer, the pH and concentration of buffer, the applied potential and the injection mode were studied. By changing the buffer pH (4.0-5.0), buffer concentration (10-50 mM) and applied potential (-10 approximately -20 kV), optimum conditions were obtained at -20 kV, using an acetate buffer (20 mM, pH 4.5), hydrodynamic injection with a vacuum at the buffer reservoir on the detector side and detection at 220 nm. The results showed that the separation was effective under these conditions. The plate number was greater than 4 x 10(4) m-l. Due to the wide variation in the mobilities of the test compounds, injection studies suggested that a vacuum at the buffer reservoir on the detector side would produce a result that is more representative of the initial sample composition. Benzoic acid in soy sauce, salicylic acid in Salic ointment and Aspirin were sampled and analyzed using the established conditions.     

Capillary electrophoresis of monoamines and catechol with indirect chemiluminescence detection.

A capillary electrophoresis (CE)/indirect chemiluminescence (CL) detection method is described for monoamines, viz., serotonin (5-HT), dopamine (DA), epinephrine (EP), and norepinephrine (NE) and for catechol (CA). Optimal separation and detection were obtained with an electrophoretic buffer of 10 mM sodium borate (pH 9.5) containing 5 mM luminol and 25 mM H2O2, and a catalyst solution of 30 microM CuSO4 in 30 mM borate buffer (pH 10.0). Complete separation of 5-HT, DA, EP, NE and CA was achieved in less than 5 min. The Cu(II)-catalyzed luminol CL reaction was employed to provide the high and constant background. Since monoamines and catechol can form stable complexes with Cu(II), inverted analyte peaks due to decreased catalytic activity of Cu(II) can be detected. The degree of CL suppression is proportional to the analyte concentrations. Linearity (r> or =20.99) over two orders of magnitude was generally obtained. The concentration limits of detection (CLODs) for the monoamines and catechol studied were between 0.5 and 3.1 uM. The relative standard deviation (RSD) values on peak size and migration time were in the ranges 3.2-4.4% and 0.4-0.5%, respectively. The applicability of the method for the analysis of pharmaceutical and biological samples was examined.     

Enhanced indirect fluorescence detection of p-nitrophenol, 2,4-dinitrophenol and trinitrophenol by micellar electrokinetic capillary chromatography with in-column optical-fiber LED-induced fluorescence detection

Enhanced indirect fluorescence detection with in-column optical-fiber LED-induced fluorescence (LED-IF) detection has been developed for the simultaneous separation and determination of p-nitrophenol, 2,4-dinitrophenol and trinitrophenol. The instrumental set-up is simple, cost-effective and the detection method is stable. Different experimental parameters have been studied. The optimum conditions were determined as: running buffer (pH 9.1) composed of 10 mM borate, 80 mM sodium dodecylsulfate and 0.18 μM fluorescein (as a background reagent); applied voltage of 15 kV; working temperature of 25.0 °C. The limits of detection (S/N = 3) were 11, 18 and 16 μM for p-nitrophenol, 2,4-dinitrophenol and trinitrophenol, respectively. The nitrophenols were completely separated in 13 min and the number of theoretical plates for p-nitrophenol, 2,4-dinitrophenol and trinitrophenol were 8.1 × 10(6), 6.5 × 10(6) and 8.4 × 10(6), respectively. The RSDs (n = 6) for the migration time and the peak area were better than 0.85 and 0.91%, respectively. Our proposed method possesses the advantages of rapidness and good separation efficiency.     

Determination of copper and iron using [S,S']-ethylenediaminedisuccinic acid as a chelating agent in wood pulp by capillary electrophoresis.

A capillary electrophoresis (CE) method is described for the simultaneous determination of copper and iron after complexation with a readily biodegradable chelating agent, [S,S']-ethylenediaminedisuccinic acid (EDDS), in wood pulp. CE separation was performed in a fused-silica capillary (50 microm i.d.; total length, 65 cm) with an electrolyte containing 25 mM borate buffer and 0.5 mM CTAB at pH 7.0 and an applied voltage of -25 kV. The samples were introduced by applying a 50 mbar pressure for 2 s, and detection of the complexes was monitored at 245 nm. The methodology performance of the methods was evaluated in terms of the linearity, limit of detection (LOD), limit of quantitation (LOQ) and reproducibility. The applicability of the method was demonstrated for the analysis of copper and iron in wood pulp.     

Analysis of drying oils used as binding media for objects of art by capillary electrophoresis with indirect UV and conductivity detection

Capillary electrophoresis (CE) was applied to analyse the long-chain fatty acid composition of vegetable oils, and their degradation products formed upon ageing when drying oils are used as binding media. The analytes were detected with contactless conductivity detection (CCD) and indirect UV absorption, both detectors positioned on-line at the separation capillary. The long-chain fatty acids were resolved in a background electrolyte (BGE) consisting of phosphate buffer (pH = 6.86, 15 mM) containing 4 mM sodium dodecylbenzensulfonate, 10 mM Brij 35, 2% (v/v) 1-octanol and 45% (v/v) acetonitrile. As in this system dicarboxylic analytes, the products of oxidative degradation of unsaturated fatty acids, cannot be determined, a suitable background electrolyte was developed by the aid of computer simulation program PeakMaster. It makes use of a 10 mM salicylic acid, 20 mM histidine buffer, pH 5.85, which combines buffering ability with the optical properties obligatory for indirect UV detection. This buffer avoids system eigenpeaks, which are often impairing the separation efficiency of the system. Separation of the dicarboxylic analytes was further improved by a counter-directed electroosmotic flow (EOF), obtained by dynamically coating the capillary wall with 0.2 mM cetyltrimethylammonium bromide. Long-chain fatty acids and their decomposition products could be determined in recent and aged samples of drying oils, respectively, and in samples taken from two paintings of the 19th century.     

Evaluation of microchip capillary electrophoresis with external contactless conductivity detection for the determination of major inorganic ions and lithium in serum and urine samples

The determination of inorganic ions in clinical samples in less than 90 seconds was demonstrated for microchip capillary electrophoresis using capacitively coupled contactless conductivity detection (C(4)D). Bare electrophoresis chips were used in combination with external electrodes which were part of the chip holder. In order to achieve the required selectivity and sensitivity, an optimization of the electrode layout was carried out. Limits of detection (LOD) of 1 microM for K(+), 1.5 microM for Ca(2+), 3 microM for Na(+), 1.75 microM for Mg(2+) and 7.5 microM for Li(+) were achieved. The determination of inorganic cations (NH(4)(+), K(+), Na(+), Ca(2+), Mg(2+)) and anions (Cl(-), NO(3)(-), SO(4)(2-), phosphate) in blood serum and urine samples was possible in one common electrolyte solution containing 15 mM L-arginine, 10.75 mM maleic acid and 1.5 mM 18-crown-6 at pH 5.90 by simply switching the separation voltage from positive to negative polarity. Lithium, present at significant levels when used for therapeutic purposes, can also be determined in blood serum using a slightly modified background electrolyte solution.     

Separation and determination of flavonoids using microemulsion EKC with electrochemical detection

A selective and sensitive method of microemulsion EKC (MEEKC) with electrochemical detection (ED) was developed for separation and determination of 14 flavonoids. In order to obtain the better stability for the studied flavonoids, oil (ethyl acetate) with low interfacial surface tension was employed as organic solvent. A running buffer composed of 0.9% (w/v, 30 mM) SDS, 0.9% (w/v, 21 mM) sodium cholate (SC), 0.9% (w/v, 121 mM) butan-1-ol, 0.6% (w/v, 68 mM) ethyl acetate, and 98.2% v/v 10 mM Na(2)B(4)O(7)-20 mM H(3)BO(3) buffer (pH 7.5) was applied for the separation of flavonoids. Under the optimum conditions, the relationship between peak currents and analyte concentrations was linear over about 1.3 and 1.7 orders of magnitude with detection limits (defined as S/N = 3) ranging from 0.02 to 0.5 microg/mL for all analytes. This method was applied for the determination of flavonoids in real samples with simple extraction procedures, and the assay results were satisfactory.     

Determination of low molecular weight organic acids in soil,plants, and water by capillary zone electrophoresis

Determination of low molecular weight organic acids in soils and plants by capillary zone electrophoresis was accomplished using a phthalate buffer and indirect UV detection mode. The influence of some crucial parameters, such as pH, buffer concentration and surfactant were investigated. A good separation of seven organic acids was achieved within 5 min using an electrolyte containing 15 mmol L(-1) potassium hydrogen phthalate, 0.5 mmol L(-1) myristyltrimethylammonium bromide (MTAB), and 5% methanol (MeOH) (v/v) at pH 5.60, separation voltage -20 kV, and temperature 25 degrees C. The relative standard deviation (n=5) of the method was found to be in range 0.18-0.56% for migration time and 3.2-4.8% for peak area. The limit of detection ranged between 0.5 micro mol L(-1) to 6 micro mol L(-1) at a signal-to-noise ratio of 3. The recovery of standard organic acids added to real samples ranged from 87 to 119%. This method was simple, rapid and reproducible, and could be applied to the simultaneous determination of organic acids in environmental samples.     

Determination of gamma-hydroxybutyric acid in clinical samples using capillary electrophoresis with contactless conductivity detection

A method for the determination of gamma-hydroxybutyric acid (GHB) in urine and serum samples with capillary electrophoresis using capacitively coupled contactless conductivity detection (CE-C(4)D) was developed. The optimized separation buffer consisting of 20 mM of arginine, 10 mM of maleic acid and 30 microM of cetyltrimethylammonium bromide (CTAB) contained 5 mM vancomycin to facilitate the separation of gamma-hydroxybutyric acid from beta-hydroxybutyric acid (BHB), which is also present in clinical samples. The detection limits in the clinical samples were found to be about 2 microg/ml, which is well below the required sensitivity for the recognition of overdosage and adequate for the determination of endogenous concentrations in urine. The determination of GHB in both types of samples was carried out directly after a fourfold dilution without requiring any derivatization or extraction procedures.