Gran电位滴定法测定乳酸环丙沙星

介绍了乳酸环丙沙星测定的Gran电位滴定法。采用Gran线性函数进行电位滴定,经图解外推或线性回归处理求出计量点,可直接用于测定乳酸环丙沙星原料药的含量。该法用于多批原料药的测定,结果与药典法基本一致。     

Simultaneous determination of halide and thiocyanate ions by potentiometric precipitation titration and multivariate calibration

Halide and thiocyanate ions can be determined by a precipitation titration with silver nitrate as the titrant, and the end-point can be evaluated by a potentiometric method, in which generally a silver indicator electrode is used as the indicator electrode and a double-junction Ag–AgCl electrode as the reference electrode. However, when mixtures of halide and thiocyanate are titrated, it is difficult to determine these components individually for there are overlapping steps in the potentiometric titration curves, especially in the case that there are obvious differences between concentrations of the components. In this paper, the linear equation for the potentiometric precipitation titration of a mixture of halide and thiocyanate ions was developed and it was then used for determining the components in the mixtures simultaneously with the aid of multivariate calibration methods. By application of this model, 27 synthetic mixtures with three- and four-component combinations of chloride, bromide, iodide and thiocyanate with low concentration levels from 1.8×10⁻⁴ to 6.2×10⁻⁴ mol l⁻¹ were analyzed and acceptable results were obtained.     

A continuous wavelet transform algorithm for peak detection

Contactless conductivity detector technology has unique advantages for microfluidic applications. However, the low S/N and varying baseline makes the signal analysis difficult. In this paper, a continuous wavelet transform-based peak detection algorithm was developed for CE signals from microfluidic chips. The Ridger peak detection algorithm is based on the MassSpecWavelet algorithm by Du et al. [Bioinformatics 2006, 22, 2059-2065], and performs a continuous wavelet transform on data, using a wavelet proportional to the first derivative of a Gaussian function. It forms sequences of local maxima and minima in the continuous wavelet transform, before pairing sequences of maxima to minima to define peaks. The peak detection algorithm was tested against the Cromwell, MassSpecWavelet, and Linear Matrix-assisted laser desorption/ionization-time-of-flight-mass spectrometer Peak Indication and Classification algorithms using experimental data. Its sensitivity to false discovery rate curve is superior to other techniques tested.     

Development of a novel potentiometric titration method for determination of polypropylene degradation

In this study, a novel potentiometric titration of hydroperoxide in degraded polypropylene (PP) is proposed. This titration is quite sensitive compared with the conventional ones such as UV and manual titrations, and its detection limit was about 2 meq/kg. The sensitivity was equal to that of molecular weight measurement by GPC for the degraded PP and, in addition, the volatilization behavior of the hydroperoxide could be detected. This titration was found to be very effective for the determination of PP degradation.     

Simultaneous titration of ternary alkaline-earth mixtures employing a potentiometric electronic tongue

A fast novel complexometric titration procedure is proposed, in which equivalence concentrations were determined using a potentiometric electronic tongue. The titration consists in a reduced number of fixed additions of titrant and the recording of the potentials of an array of ion-selective electrodes with cross-selectivity response. The generated data (number of sensors × number of additions) were used as input data to an artificial neural network response model previously trained with standards. The application of this procedure is demonstrated with automated EDTA titrations of Ca²⁺, Mg²⁺ and Sr²⁺ mixtures, up to 3.3 mM total ion concentration. In the studied case, good results predicting the three concentrations were obtained using five 1 mL fixed volume additions plus the readings of eight sensors. The unique additional step required was the pH buffering of the sample to pH 9.5. Good comparisons were observed between obtained and expected concentrations for the three cations with the external validation samples (n = 17, with RMSE values of 0.18, 0.28 and 0.32 mM for Ca²⁺, Mg²⁺ and Sr²⁺, respectively). The proposed procedure was applied to mineral waters and compared with reference methods.     

电位质子滴定与NEXAFS和XPS表征功能化多壁碳纳米管比较(英文)

Since the discovery of carbon nanotubes (CNT), this material has been recognized as an attractive catalyst support. CNT must be functionalized before use as a catalyst support and typically this involves oxidation. However, the functional group distribution on the CNT is very complex mixture of groups and varies with oxidation agent used. Here a simple acid-base titration is introduced to characterize the oxygen functionalized CNT. By comparing characterization with near-edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS) for both at the C and O K-edges, it can be demonstrated that potentiometric proton titration can be a fast and quantitative analysis for Brnsted acid functional groups on CNT.     

用小波变换确定电位滴定终点

将小波变换在信号和图象处理过程中边缘检取的思想方法引入到化学中，以确定电位滴定的终点，能直接对测量的数据进行处理，不会引入人为的误差因素。计算精度可达实验精度的下限，且处理结果的判断非常简便，用本方法对实验数据进行处理，获得满意的结果。     

小波分析对奇异性检测用于滴定终点确定的研究

在分析化学领域中,利用数学判断法确定滴定终点,随着计算机的日益普及而备受关注。此文在介绍当前普遍采用的二进小波变换奇异性检测方法的基础上,提出基于多分辨率分析和连续小波变换两种奇异性检测方法,并应用于氢氧化钠对盐酸和磷酸滴定曲线判断终点的试验中,取得了良好的效果。     

电位滴定测定富锂锰基正极材料中锰

采用盐酸、硝酸溶解样品,加入焦磷酸钠溶液并调节溶液pH为6.0~7.0。用高锰酸钾标准溶液滴定至电位滴定仪上,根据消耗的高锰酸钾标准溶液的体积计算样品中的锰含量。探究了焦磷酸钠用量、溶液pH、共存元素等对测定锰含量的影响。在最优的实验条件下,方法的相对标准偏差在0.13%~0.22%之间,加标回收率在99.8%~100.5%之间。本方法是富锂锰基正极材料中质量分数10%~60%的锰测定的理想方法。     

Selective and specific detection of sulfate-reducing bacteria using potentiometric stripping analysis

A fast, sensitive and reliable potentiometric stripping analysis (PSA) is described for the selective detection of the marine pathogenic sulfate-reducing bacterium (SRB), Desulforibrio caledoiensis. The chemical and electrochemical parameters that exert influence on the deposition and stripping of lead ion, such as deposition potential, deposition time and pH value were carefully studied. The concentration of SRB was determined in acetate buffer solution (pH 5.2) under the optimized condition (deposition potential of −1.3 V, deposition time of 250 s, ionic strength of 0.2 mol L⁻¹ and oxidant mercury (II) concentration of 40 mg L⁻¹). A linear relationship between the stripping response and the logarithm of the bacterial concentration was observed in the range of 2.3 × 10 to 2.3 × 10⁷ cfu mL⁻¹. In addition, the potentiometric stripping technique gave a distinct response to the SRB, but had no obvious response to Escherichia coli. The measurement system has a potential for further applications and provides a facile and sample method for detection of pathogenic bacteria.     

Critical evaluation of potentiometric redox titrations in enology

Measurements of the zero current potential of a platinum electrode immersed in solutions of tanins or in wines of various origins, were performed during the additions of a solution of Ti(III), or of a solution of dichlorophenolindophenol (DCPIP), in order to obtain a global indication for the resistance to oxidation of some wines. The steady state intensity-potential curves on a platinum electrode highlight the occurrence of mixed potentials between the oxidation of ethanol or catechin and the reduction of oxygen present at very low concentrations, as well as the irreversibility of the redox system Ti(IV)/Ti(III). The adsorption of various species on the platinum and the slowness of the oxidation reactions by DCPIP exclude use of potentiometric titration theory. The shape of the potential-reagent volume curves depends on the nature of the solution and on the rate of reagent introduction. Generally, due to the slowness of the oxidation reactions with DCPIP it is impossible to find a linear relationship between the volume of titrant solution necessary to reach the inflexion point of the curves and the solution composition.     

Signal Processing in Normal Pulse Voltammetry by Means of Dedicated Mother Wavelet

In the work, a new signal processing algorithm is presented and applied for the transformation of the sigmoidal shaped curves, registered in normal pulse voltammetry (NPV), to the peak shaped curves. The method is based on the continuous wavelet transform (CWT) and specially constructed mother wavelet defined using the ideal wave‐shaped curve. Transformation of the signal, elimination of noises and separation of overlapping data can be achieved in one step by means of proposed procedure. The operation and effectiveness of the algorithm is presented using ideal, noised and overlapping simulated curves. The process of simultaneous determination of lead and indium as well as transformation of curves registered for elements' ions: lead, indium, thallium and cadmium is described. The obtained results show substantial improvement of the performance of NPV.     

Determination of total fluoride in HF/HNO3/H2SiF6 etch solutions by new potentiometric titration methods

In the photovoltaic industry the etching of silicon in HF/HNO₃ solutions is a decisive process for cleaning wafer surfaces or to produce certain surface morphologies like polishing or texturization. With regard to cost efficiency, a maximal utilisation of etch baths in combination with highest quality and accuracy is strived. To provide an etch bath control realised by a replenishment with concentrated acids the main constituents of these HF/HNO₃ etch solutions including the reaction product H₂SiF₆ have to be analysed. Two new methods for the determination of the total fluoride content in an acidic etch solution based on the precipitation titration with La(NO₃)₃ are presented within this paper. The first method bases on the proper choice of the reaction conditions, since free fluoride ions have to be liberated from HF and H₂SiF₆ at the same time to be detected by a fluoride ion-selective electrode (F-ISE). Therefore, the sample is adjusted to a pH of 8 for total cleavage of the SiF₆²⁻ anion and titrated in absence of buffers. In a second method, the titration with La(NO₃)₃ is followed by a change of the pH-value using a HF resistant glass-electrode. Both methods provide consistent values, whereas the analysis is fast and accurate, and thus, applicable for industrial process control.     

Feature analysis of protein structure by using discrete Fourier transform and continuous wavelet transform

In this paper, discrete Fourier transform (DFT) and continuous wavelet transform (CWT) are used to predict the protein structure. Hydrophobicity plays a key role in the form of protein structure. The amino acid sequence is first mapped into hydrophobicity sequence, and then process it by DFT and CWT so that power spectral density is gained. The results show that continuous wavelet transform can extract the features of protein structure effectively and availably and has a tremendous development foreground.     

Determination of vanadium(V) by direct automatic potentiometric titration with EDTA using a chemically modified electrode as a potentiometric sensor

A chemically modified electrode (CME) was prepared and studied as a potentiometric sensor for the end-point detection in the automatic titration of vanadium(V) with EDTA. The CME was constructed with a paste prepared by mixing spectral-grade graphite powder, Nujol oil and N-2-naphthoyl-N-p-tolylhydroxamic acid (NTHA). Buffer systems, pH effects and the concentration range were studied. Interference ions were separated by applying a liquid-liquid extraction procedure.The CME did not require any special conditioning before using. The electrode was constructed with very inexpensive materials and was easily made. It could be continuously used, at least two months without removing the paste.Automatic potentiometric titration curves were obtained for V(V) within 5 × 10⁻⁵ to 2 × 10⁻³ M with acceptable accuracy and precision. The developed method was applied to V(V) determination in alloys for hip prothesis.     

非水滴定法测定苯唑醇含量的研究

建立了农药中间体苯唑醇的分析方法，用指示剂法和电位法对苯唑醇进行了非水滴定的研究，测定结果与高效液相色谱(HPLC)法基本一致，相对标准偏差≤0．20％。     

Some aspects of the use of heteropoly anions in elemental analysis by simple potentiometric ion-pair formation-based titration

The possibility of the use of heteropoly anions formed by addition of phosphate to the solutions of either molybdate or tungstate in the determination of phosphorus by the simple method of potentiometric titration was studied. The heteropoly anions are titrated on the ion-pairing principle using a titrant containing a lipophilic counter-ion, i.e. 1-(ethoxycarbonyl)pentadecyltrimethylammonium bromide (Septonex), the titration being monitored by carbon paste electrode, although other liquid membrane-based electrodes can also be used. Calibration plots of the titrant end-point consumption vs. concentration are not linear, but allow one to evaluate the content of phosphorus. Similar procedures, when optimized, should be elaborated for determination of numerous other elements forming heteropoly anions.     

Potentiometric titration of Co(II) in presence of Co(III)

A potentiometric titration for cobalt(II) determination in the presence of Co(III) based on the oxidation of Co(II) with Na₂CrO₄ in ethylenediamine medium and back-titration of the oxidant excess with (NH₄)₂Fe(SO₄)₂ in acid medium is described. The titration is monitored with a Pt indicator electrode and carried out until the greatest jump of potential from one drop of titrant appears. A RSD smaller than 1.5% has been obtained for 50–300 μmol Co(II). The method proposed was applied in the analysis of a new type electroless copper plating solutions containing Co(II)-ethylenediamine complex compounds as reducing agents. Cu(II), Co(III) and Cr(III) do not interfere in the determination of Co(II).     

Clinical analysis of human urine by means of potentiometric Electronic tongue

The Electronic tongue (ET) composed of different kind of potentiometric chemical sensors has been applied for the detection of urinary system dysfunctions and creatinine levels. The creatinine contents evaluated by ET were compared with those obtained by automated Jaffe’s method and GC-MS, obtaining a satisfying agreement for both methods. Partial least square regression discriminate analysis (PLS-DA) and feed forward back-propagation neural network (FFBP NN) classified 51 urine specimens from healthy volunteers in four classes, according to the creatinine content, showing that both techniques can satisfactorily differentiate urines according to this parameter. The best accuracy result of 92.2% correct classification of unknown samples was achieved with FFBP NN. Moreover, the possibility of ET system to distinguish between urine samples of healthy patients, and those with malignant and non-malignant tumor diagnosis of bladder has been shown.     

A potentiometric titration study on the dissociation of bile acids related to the mode of interaction between different head groups of nonionic surfactants with free bile salts upon mixed micelle formation in water

By constructing an elaborate set of potentiometric titration together with data analysis system, apparent acid dissociation indices (pK _a ^app ) for two bile acids were determined in the mixed surfactant system of bile salts (Sodium Deoxycholate, NaDC, and Sodium Chenodeoxycholate, NaCDC) with nonionic surfactants (Hexaethyleneglycol monon-dodecylether, C₁₂E₆, Decanoyl-N-methylglucamide, MEGA-10) in aqueous solution at ionic strength 1.5 as a function of mole fraction in the surfactant mixture. It was found that with increasing the bile salt concentration, pK _a ^app as well as pH showed an abrupt rise at a certain concentration of the bile salt being regardable as a critical micellization concentration (CMC) and reached a constant value at the range sufficiently higher than CMC for each pure bile salt system, meaning that the dissociation degree of carboxyl group in micelle is smaller than that in bulk. In the mixed systems of free bile salts with nonionic surfactants, the dissociation state of carboxyl groups in mixed micelles depends on the species of hydrophilic group of nonionic surfactants as well as on mole fraction in the surfactant mixture.