Multisyringe chromatography (MSC) using a monolithic column for the determination of sulphonated azo dyes

A methodology based on multisyringe chromatography with a monolithic column was developed to determine three sulphonated azo textile dyes: Acid Yellow 23, Acid Yellow 9 and Acid Red 97. An ion pair reagent was needed because of the low affinity between the monolithic column and the anionic dyes. The proposed analytical system is simple, versatile and low-cost and has great flexibility in manifold configuration.The method was optimized through experimentation based on experimental design methodology. For this purpose two blocks of full factorial 2³ were done sequentially. In the first experimental plan, the factors studied were: the % of acetonitrile in organic phase, the % of H₂O in the mobile phase and the kind of ion pair reagent. In this stage, a simple configuration was used which has only one syringe for the mobile phase.After the first experimentation, we added a second syringe with a second mobile phase to the multisyringe module and performed a second full factorial 2³. The factors studied in this case were: the % of acetonitrile in the second mobile phase, the pH and the concentration of ion pair reagent in both mobile phases. After this design, the optimal conditions were selected for obtaining a good resolution between the peaks of yellow dyes (1.47) and the elution of red dye in less than 8 min.The methodology was validated by spiking different amounts of each dye in real water samples, specifically, tap water, well water and water from a biological wastewater lagoon.     

Adsorption and Photodegradation of Methylene Blue by Using PAni/TiO2 Nanocomposite

In this study, polyaniline-titanium dioxide (PAni-TiO₂) nanocomposite has been prepared and was utilized as an effective catalyst for photodegradation of methylene blue (MB) dyes from aqueous solution. Adsorption characteristic on the PAni-TiO₂ surface and the aqueous solubility of the dyes also play an important role in the photodegradation of dye. Adsorption and photodegradation process occurs simultaneously on the surface of the catalyst at first adsorption occurs (21.5%) on the outer surface of the catalyst and then photodegrade the material up to (66.5%). In reaction mechanism OH^· makes the vital role to the degradation of methylene blue and its intermediates. To know the surface and stability of the photocatalyst, it was characterized by FTIR, TEM, TGA–DTA, XRD, UV-vis spectrophotometer, and SEM analysis. Kinetic data indicate that up to 20 minutes photodegradation rates usually follows the pseudo-first-order reaction. After 20 minutes, it follows the Langmuir-Hinshelwood (LH) kinetics. Photo reactivity of PAni-TiO₂ was studied with pH of solution, dosage of photocatalyst and concentration of dye. The reaction rate constant (r) and equilibrium binding constant (K) values were incredibly significant than other catalyst.     

Sequential injection analysis with second-order treatment for the determination of dyes in the exhaustion process of tanning effluents

A sequential injection (SI)-DAD spectrophotometric method to control the exhaustion of dyes in a mixture of three dyes from a tanning industry process has been developed. It is based on an interdiffusion process of the sample and reagents which leads to a gradual fall in pH through the channel to the detector recording a data matrix. The aim of this paper is to develop a second-order calibration model that is unaffected by interferents by applying multivariate curve resolution with alternating least squares (MCR-ALS). We obtained a linear calibration in the 5-30 mg l⁻¹ range with a correlation coefficient of 0.999 for each dye with detection limits of 2.6, 3.9 and 2.1 mg l⁻¹ for Acid Red, Acid Brown and Acid Orange, respectively. The simultaneous determination of the three dyes from tanning samples showed a satisfactory precision for the three analytes. The method has been validated comparing the concentration of some spiked samples with the expected concentration using a t-paired test. When we used this method to study the exhaustion of dyes, we found that there were several stages in this process. These data may be the key to optimising the exhaustion process.     

Synthesis,Characterization, and Catalytic Activity of New Cu(II) Complexes of Schiff Base: Effective Catalysts for Decolorization of Acid Red 37 Dye Solution

In this paper, three new Cu(II) Schiff base complexes with three different anions (acetate, chloride, and nitrate) were successfully synthesized and characterized by elemental analysis, mass spectra, molar conductance, FT‐IR, NMR,UV–vis spectroscopy, magnetic moment, ESR, and thermal analysis. The catalytic performances of these complexes in decolorization of azo dye, Acid Red 37, were evaluated. Copper(II) complexes were found to be an efficient catalyst for decolorization of Acid Red 37 in the presence of hydrogen peroxide. The catalytic investigation revealed that the Cu(II) complex with acetate anion (complex 1 ) performed the highest catalytic activity. The kinetics of the decolorization of AR37 with this catalyst was studied, and the observed rate constant was determined. The effects of different reaction parameters such as catalyst dosage, solution pH, initial concentration of H₂O₂, dye solution, and reaction temperature on the reaction rate constant were studied. The best reacting conditions should be catalyst dosage = 0.004 g, initial pH 4.0, [H₂O₂]₀ = 0.8 M, and [AR37]₀ = 1.16 M at temperature 25°C. Under these conditions, about 99% of AR37 was decolorized within 60 min. The results indicated that the Cu(II) complex with the acetate anion is a promising catalyst for wastewater treatment.     

Spectrophotometric Studies on the Aggregation of Some Acid Dyes

The electronic absorption spectra of different acid dyes, mainly C. I. Acid Red 13, 18, 27, 88 and 141, have been investigated in aqueous and non-aqueous solutions. As the concentration of the dye increases the absorption spectrum shifts to shorter wavelengths; this behaviour has been attributed to the formation of higher aggregates. The longer wavelength band, most marked in dilute solutions, is typical of the monomeric dye. The aggregation of these dyes were studied quantitatively using the Maximum Slope Method. The monosulfonic acid dyes Red 141 and 88 and the disulfonic acid dye 13 are aggregated at room temperature with an average aggregation number of 2.0, 2.2 and 1.5, respectively. The trisulfonic acid dyes Red 18 and 27 show very little aggregation at this temperature.     

Straightforward Synthesis of Mn3O4/ZnO/Eu2O3-Based Ternary Heterostructure Nano-Photocatalyst and Its Application for the Photodegradation of Methyl Orange and Methylene Blue Dyes

Zinc oxide-ternary heterostructure Mn₃O₄/ZnO/Eu₂O₃ nanocomposites were successfully prepared via waste curd as fuel by a facile one-pot combustion procedure. The fabricated heterostructures were characterized utilizing XRD, UV–Visible, FT-IR, FE-SEM, HRTEM and EDX analysis. The photocatalytic degradation efficacy of the synthesized ternary nanocomposite was evaluated utilizing model organic pollutants of methylene blue (MB) and methyl orange (MO) in water as examples of cationic dyes and anionic dyes, respectively, under natural solar irradiation. The effect of various experimental factors, viz. the effect of a light source, catalyst dosage, irradiation time, pH of dye solution and dye concentration on the photodegradation activity, was systematically studied. The ternary Mn₃O₄/ZnO/Eu₂O₃ photocatalyst exhibited excellent MB and MO degradation activity of 98% and 96%, respectively, at 150 min under natural sunlight irradiation. Experiments further conclude that the fabricated nanocomposite exhibits pH-dependent photocatalytic efficacy, and for best results, concentrations of dye and catalysts have to be maintained in a specific range. The prepared photocatalysts are exemplary and could be employed for wastewater handling and several ecological applications.     

Photocatalytic degradation of organic dyes by Er<Superscript>3+</Superscript>: YAlO<Subscript>3</Subscript>/Co- and Fe-doped ZnO coated composites under solar irradiation

In this work, the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites were prepared by the sol-gel method. Then, they were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDX). Photo-degradation of azo fuchsine (AF) as a model dye under solar light irradiation was studied to evaluate the photocatalytic activity of the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites. It was found that the photocatalytic activity of Co- and Fe-doped ZnO composites can be obviously enhanced by upconversion luminescence agent (Er³⁺: YAlO₃). Besides, the photocatalytic activity of Er³⁺: YAlO₃/Fe-doped ZnO is better than that of Er³⁺: YAlO₃/Co-doped ZnO. The influence of experiment conditions, such as the concentration of Er³⁺: YAlO₃, heat-treatment temperature and time on the photocatalytic activity of the Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites was studied. In addition, the effects of solar light irradiation time, dye initial concentration, Er³⁺: YAlO₃/Co- and Fe-doped ZnO amount on the photocatalytic degradation of azo fuchsine in aqueous solution were investigated in detail. Simultaneously, some other organic dyes, such as Methyl Orange (MO), Rhodamine B (RM-B), Acid Red B (AR-B), Congo Red (CR), and Methyl Blue (MB) were also studied. The possible excitation principle of Er³⁺: YAlO₃/Co- and Fe-doped ZnO coated composites under solar light irradiation and the photocatalytic degradation mechanism of organic dyes were discussed.     

Photo fenton like process Fe3+/(NH4)2S2O8/UV for the degradation of Di azo dye congo red using low iron concentration

Degradation of Congo Red (CR) a di azo dye in aqueous solution is investigated by a Photo Fenton like process using Fe³⁺ ions as the catalyst and peroxy disulfate as the oxidant. The influence of various reaction parameters like, concentration of Fe³⁺ ions, concentration of the dye, concentration of ammonium persulfate, pH of the solution and the presence of hydroxyl radical scavenger are studied and optimal conditions are reported. The degradation rate decreased at higher dye concentration and at higher pH. The rate constant (k), catalytic efficiency (k_c) and process efficiency (Φ) are evaluated for different concentration of Fe³⁺ ions. The degradation of CR by the photo Fenton like process leads to the formation of 4-Amino, 3-azo naphthalene sulphonic acid, dihydroxy substituted naphthalene, dihydroxy substituted biphenyl, phenol, quinol etc., as intermediates, based on which probable degradation mechanism is proposed. These results show that a photo Fenton like process could be useful technology for the mineralization of di azo dyes under lower concentration of iron in acidic conditions. The present process is advantageous as it lowers the sludge production resulting from the iron comple      

A Film-Pore-Surface Diffusion Model for the Adsorption of Acid Dyes on Activated Carbon

The sorption of acid dyes from aqueous effluents onto activated carbon has been studied. The effects of initial dye concentration and activated carbon mass on the rate of Acid Blue 80, Acid Red 114 and Acid Yellow 117 removal have been investigated. A three-resistance mass transport model based on film, pore and surface diffusion control has been applied to model the concentration decay curves. The model incorporates an effective diffusion coefficient D _eff, which is dependant on the equilibrium solid phase concentration or fractional surface coverage. The results of the film-pore-surface diffusion model are compared with the data obtained from the basic film-pore diffusion model. It has been found that the film-pore-surface diffusion model provides a major improvement over the data correlated by the film-pore diffusion model. Also, the relationship between surface diffusion and fractional surface coverage has been investigated for the adsorption of acid dyes on activated carbon.     

A Film-Pore-Surface Diffusion Model for the Adsorption of Acid Dyes on Activated Carbon

The sorption of acid dyes from aqueous effluents onto activated carbon has been studied. The effects of initial dye concentration and activated carbon mass on the rate of Acid Blue 80, Acid Red 114 and Acid Yellow 117 removal have been investigated. A three-resistance mass transport model based on film, pore and surface diffusion control has been applied to model the concentration decay curves. The model incorporates an effective diffusion coefficient D _eff, which is dependant on the equilibrium solid phase concentration or fractional surface coverage. The results of the film-pore-surface diffusion model are compared with the data obtained from the basic film-pore diffusion model. It has been found that the film-pore-surface diffusion model provides a major improvement over the data correlated by the film-pore diffusion model. Also, the relationship between surface diffusion and fractional surface coverage has been investigated for the adsorption of acid dyes on activated carbon.     

Photocatalytic degradation of triazine dyes over N-doped TiO2 in solar radiation

Photocatalytic degradation of the reactive triazine dyes Reactive Yellow 84 (RY 84), Reactive Red 120 (RR 120), and Reactive Blue 160 (RB 160) on anatase phase N-doped TiO₂ in the presence of natural sunlight has been carried out in this work. The effect of experimental parameters like initial pH and concentration of dye solution and dosage of the catalyst on photocatalytic degradation have also been investigated. Adsorption of dyes on N-doped TiO₂ was studied prior to photocatalytic studies. The studies show that the adsorption of dyes on N-doped TiO₂ was high at pH 3 and follows the Langmuir adsorption isotherm. The Langmuir monolayer adsorption capacity of dyes on N-doped TiO₂ was 39.5, 86.0, and 96.3 mg g^?1 for RY 84, RR 120, and RB 160, respectively. The photocatalytic degradation of the dyes follows pseudo first-order kinetics and the rate constant values are higher for N-doped TiO₂ when compared with that of undoped TiO₂. Moreover, the degradation of RY 84 on N-doped TiO₂ in sunlight was faster than the commercial Aeroxide^® P25. However, the P25 has shown higher photocatalytic activity for the other two dyes, RR 120 and RB 160. The COD of 50 mg l^?1 Reactive Yellow-84, RR 120 and RB 160 was reduced by 65.1, 73.1, and 69.6 %, respectively, upon irradiation of sunlight for 3 h in the presence of N-doped TiO₂. The photocatalyst shows low activity for the degradation of RY 84 dye, when its concentration was above 50 mg l^?1, due to the strong absorption of photons in the wavelength range 200–400 nm by the dye solution. LC–MS analysis shows the presence of some triazine compounds and formimidamide derivatives in the dye solutions after 3 h solar light irradiation in the presence of N-doped TiO₂.     

The Role of the Relative Dye/Photocatalyst Concentration in TiO2 Assisted Photodegradation Process

Despite photocatalytic degradation is studied generally focusing the catalyst, its interaction with the contaminant molecule plays a fundamental role in the efficiency of that process. Then, we proposed a comparative study about the photodegradation of two well‐known dyes, with different acidity/basicity – Methylene Blue (MB) and Rhodamine B (RhB), catalyzed by TiO₂ nanoparticles, varying both dye and photocatalyst concentrations. The results showed that the amphoteric character of MB molecules, even in a range of concentration of 5.0–10.0 mg L^?1, did not imply in pH variation in solution. Therefore, it did not affect the colloidal behavior of TiO₂ nanoparticles, independent of the relative dye/catalyst concentration. The acid–base character of RhB influenced the resultant pH of the solution, implicating in different colloidal behavior of the nanoparticles and consequently, in different degradation conditions according to dye concentration. As the isoelectric point of TiO₂ is between the pH range of the RhB solutions used in this study, from 1.0 to 7.5 mg L^?1, the resultant pH was the key factor for degradation conditions, from a well dispersed to an agglomerated suspension.     

Preparation of Er3+:YAlO3/Fe-doped ZnO composite and investigation on solar light photocatalytic degradation of organic dyes

The Er³⁺:YAlO₃/Fe-doped ZnO composite, a new photocatalyst which could effectively utilize visible light, was prepared. In succession, the Er³⁺:YAlO₃/Fe-doped ZnO was characterized by XRD and SEM, respectively. Acid Red B dyes, was degraded under solar light irradiation to evaluate the photocatalytic activity of the Er³⁺:YAlO₃/Fe-doped ZnO. In addition, the effects of Er³⁺:YAlO₃ content, heat-treatment temperature and time on the photocatalytic activity of Er³⁺:YAlO₃/Fe-doped ZnO were reviewed. Otherwise, the effect of initial dye concentration, Er³⁺:YAlO₃/Fe-doped ZnO amount and solar light irradiation time on the photocatalytic degradation of Acid Red B were also investigated. It was found that the photocatalytic activity of Er³⁺:YAlO₃/Fe-doped ZnO is much higher than that of Fe-doped ZnO and pure ZnO for the similar system. Perhaps, the use of the Er³⁺:YAlO₃/Fe-doped ZnO may provide a new way to take advantage of ZnO in sewage treatment aspects using solar energy.     

Diffusion of monoanionic dyes in nylon

The diffusion of three monoanionic dyes [Orange II (C.I. Acid Red 7) and two chromium complex dyes] in nylon 6 is discussed on the basis of dye distribution obtained by the film-roll method. Variations of the diffusion coefficients with dye concentration depend characteristically on the dye species and in one case show a maximum near the dye concentration stoichiometric to the amino endgroup concentration in the nylon. These concentration dependences are interpreted on the assumption of two thermodynamically distinct dye populations in equilibrium.     

改性PAN纤维与铁离子的配位结构及其对染料降解的催化作用

在室温条件下应用偕胺肟改性聚丙烯腈纤维(AO-PAN)与FeCl3反应制备了聚丙烯腈纤维铁配合物(Fe-AO-PAN), 并分别使用X射线光电子能谱(XPS)、傅立叶红外光谱(FTIR)、动态热机械分析(DTMA)和电导法对Fe-AO-PAN进行了表征以确定其组成结构. 然后将Fe-AO-PAN作为非均相Fenton 催化剂应用于两种常用偶氮染料C.I.活性红195(RR 195)和C.I.酸性黑234(AB 234)的光催化氧化降解反应中, 考察了其对降解反应的催化作用. 结果表明, Fe-AO-PAN中的Fe3+能够与AO-PAN表面三个偕胺肟(AO)链节单元的三个氨基氮原子和三个羟基氧原子进行配位反应, 配位数为6. 在Fe-AO-PAN和辐射光存在下, 两种染料的氧化降解反应速度显著加快, 染料结构中的偶氮键和芳香环结构都遭到破坏. PAN纤维腈基转化率的提高不仅能够明显增加Fe-AOPAN表面结构中Fe3+含量, 而且可显著促进其对染料氧化降解反应的催化作用.     

Adsorption of acid red 114 and reactive black 5 in aqueous solutions on dendrimer‐conjugated magnetic nanoparticles

The adsorption of the dyes Acid Red 114 and Reactive Black 5 in aqueous solutions on polyhydroxyl dendrimer magnetic nanoparticles (Fe₃O₄@SiO₂‐TRIS) was studied in a batch system. The Fe₃O₄@SiO₂‐TRIS NPs were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, and transmission electron microscopy. Experiments were performed under different conditions such as the initial dye concentration, adsorbent dose, and pH. The pseudo‐second‐order model provided a very good fit for the two anionic dyes. The Langmuir and Freundlich adsorption models were used to describe the equilibrium isotherms at different temperatures, and the former agreed very well with the experimental data. However, the adsorption capacity of Fe₃O₄@SiO₂‐TRIS NPs was reduced during surface modification, which could be due to the dye occupying the binding sites of the dendrimer. Thermodynamic parameters, namely the change in free energy (ΔG⁰), enthalpy (ΔH⁰), and entropy (ΔS⁰), were also determined.     

Environmentally Friendly g-C3N4/Sepiolite Fiber for Enhanced Degradation of Dye under Visible Light

Herein, novel visible light active graphitic carbon nitride (g-C₃N₄)/sepiolite fiber (CN/SS) composites were fabricated via a facile calcination route, exploiting melamine and thiourea as precursors, and sepiolite fiber as support, for efficient degradation of organic dye methylene blue (MB). The as-prepared CN/SS composites were characterized by various characterization techniques based on structural and microstructural analyses. The effects of CN loading amount, catalyst dosage and initial concentration of dye on the removal rate of dye under visible light were systematically studied. The removal rate of MB was as high as 99.5%, 99.6% and 99.6% over the composites when the CN loading amount, catalyst dosage and initial concentration of dye were 20% (mass percent), 0.1 g, and 15 mg/L in 120 min, respectively. The active species scavenging experiments and electron paramagnetic resonance (EPR) measurement indicated that the holes (h⁺), hydroxyl radical (·OH) and superoxide radicals (·O₂⁻) were the main active species. This study provides for the design of low-cost, environmentally friendly and highly efficient catalysts for the removal of organic dye.     

Application of a novel bimetallic hydrogel based on iron and cobalt for the synergistic catalytic degradation of Congo Red dye

Herein, we developed a bimetallic (Fe and Co) polyacrylamide (PAM) hydrogel (FeCo@PAM) to investigate the synergistic catalytic degradation of Congo Red (CR) dye. The structure and the morphology of the FeCo@PAM hydrogel were analyzed using the Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy‐dispersive X‐ray spectrometry (EDX). To study the chemical composition of our catalyst, the FTIR technique was applied. The SEM and EDX confirmed the presence of bimetallic ions in the PAM hydrogel. All critical parameters of the catalyst, that is, mass, dye concentration, H₂O₂ dose, temperature, and pH were investigated and optimized. The synergistic oxidative catalytic degradation of the CR dye using FeCo@PAM under the optimal conditions was calculated to be 96.45% (60 min), which was 11.26% (75 min) higher than that of Fe@PAM and 11.69% (75 min) higher than that of Co@PAM. For FeCo@PAM, not only the degradation percentage increased also the reaction time decrease was phenomenal. These experiments verified the synergistic oxidative degradation of the CR dye exhibited by the FeCo@PAM catalyst. The Kinetic isotherm studies were also studied to determine the CR degradation progression. Our FeCo@PAM catalyst also demonstrated to be highly recyclable, as high CR dye degradation was accomplished up to three consecutive cycles.     

Modeling and optimization of simultaneous photocatalysis of three dyes on ceramic-coated TiO2 nanoparticles using chemometrics methods: phytotoxicological assessment during degradation process

In this paper, ceramic plates were used as a support of TiO₂ nanoparticles for photocatalytic decolorization of a mixture of three dyes. The three textile dyes (C.I. Basic Red 46, C.I. Basic Blue 3 and Malachite Green) were quantified simultaneously during the photocatalytic degradation process. The partial least squares modeling was successfully applied for the multivariate calibration of the spectrophotometric data. Also, the central composite design has been applied to the optimization of photocatalytic decolorization of the dye solution containing three dyes using an immobilized UV/TiO₂ process. The optimum initial concentration of three dyes, reaction time, and UV light intensity were found to be 5 mg/L, 240 min, and 47.2 W/m², respectively. The chronic phytotoxicity of mixture of dyes was evaluated using aquatic species Spirodela polyrhiza (S. polyrhiza) prior to and after photocatalysis. The phytotoxicity results revealed that the photocatalysis process could effectively reduce the phytotoxicity of the dyes from their aqueous solutions.     

Chromonic liquid crystals formed by CI Acid Red 266 and related structures

Chromonic liquid crystals are currently receiving increased attention because they have applications in a wide range of products. In this study, we have compared the chromonic mesophase behaviour of four azo dyes with similar chemical structures. Our objective is to determine if there is an obvious link between mesophase formation and dye chemical structure. Orange G does not form mesophases over the concentration range examined (saturated solution > ~20–30 wt%). The other three compounds all form nematic (N) and hexagonal (H) mesophases, but over very different concentration ranges. X-ray diffraction shows that the ordered Edicol Sunset Yellow (ESY) aggregates present in the mesophases have a single molecule cross section, while those of CI Acid Red have a cross section equivalent to six to eight molecules, probably organised in a ‘water-filled pipes’ structure. NMR quadrupole splittings of ²H₂O demonstrate that water binding to the aggregates is similar to that found for surfactant lyotropic mesophases. The sodium (²³Na) quadrupole splittings for Orange II and CI Acid Red are similar to the values found for surfactant hexagonal phases, suggesting that most sodium ions are ‘bound’ to the aggregates. This is unlike the behaviour of ESY where only one of the two sodium ions is bound.