Biosensor based on laccase and an ionic liquid for determination of rosmarinic acid in plant extracts

Novel biosensors based on laccase from Aspergillus oryzae and the ionic liquids (ILs) 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMIPF₆) and 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMIBF₄) were constructed for determination of rosmarinic acid by square-wave voltammetry. The laccase catalyzes the oxidation of rosmarinic acid to the corresponding o-quinone, which is electrochemically reduced back to rosmarinic acid at +0.2 V vs. Ag/AgCl. The biosensor based on BMIPF₆ showed a better performance than that based on BMIBF₄. The best performance was obtained with 50:20:15:15% (w/w/w/w) of the graphite powder:laccase:Nujol:BMIPF₆ composition in 0.1 mol L⁻¹ acetate buffer solution (pH 5.0). The rosmarinic acid concentration was linear in the range of 9.99 × 10⁻⁷ to 6.54 × 10⁻⁵ mol L⁻¹ (r = 0.9996) with a detection limit of 1.88 × 10⁻⁷ mol L⁻¹. The recovery study for rosmarinic acid in plant extract samples gave values from 96.1 to 105.0% and the concentrations determined were in agreement with those obtained using capillary electrophoresis at the 95% confidence level. The BMIPF₆-biosensor demonstrated long-term stability (300 days; 920 determinations) and reproducibility, with a relative standard deviation of 0.56%.     

Aryl C-glycosylation using an ionic liquid containing a protic acid

Aryl C-glycosylation of several glycosyl donors, including unprotected sugars, with phenol and naphthol derivatives in an ionic liquid containing a protic acid proceeded effectively and stereoselectively to give the corresponding aryl C-glycosides in good to high yields. Because the ionic liquid was nonvolatile, the reaction could be carried out under reduced pressure; in addition, the ionic liquid could be reused without loss of effectiveness. These features contribute to the significant advantages of this novel aryl C-glycosylation reaction.     

Application of ionic liquids based enzyme-assisted extraction of chlorogenic acid from Eucommia ulmoides leaves

A new approach for ionic liquid based enzyme-assisted extraction (ILEAE) of chlorogenic acid (CGA) from Eucommia ulmoides is presented in which enzyme pretreatment was used in ionic liquids aqueous media to enhance extraction yield. For this purpose, the solubility of CGA and the activity of cellulase were investigated in eight 1-alkyl-3-methylimidazolium ionic liquids. Cellulase in 0.5 M [C6mim]Br aqueous solution was found to provide better performance in extraction. The factors of ILEAE procedures including extraction time, extraction phase pH, extraction temperatures and enzyme concentrations were investigated. Moreover, the novel developed approach offered advantages in term of yield and efficiency compared with other conventional extraction techniques. Scanning electronic microscopy of plant samples indicated that cellulase treated cell wall in ionic liquid solution was subjected to extract, which led to more efficient extraction by reducing mass transfer barrier. The proposed ILEAE method would develope a continuous process for enzyme-assisted extraction including enzyme incubation and solvent extraction process. In this research, we propose a novel view for enzyme-assisted extraction of plant active component, besides concentrating on enzyme facilitated cell wall degradation, focusing on improvement of bad permeability of ionic liquids solutions.     

Hydrogenation of aryl ketones using palladium nanoparticles on single-walled carbon nanotubes in an ionic liquid

Single-walled carbon nanotubes (SWNTs) are used as supporting materials for palladium (Pd) nanoparticles generated in situ in ionic liquid (IL); Pd nanocatalysts on SWNTs exhibit superior reactivity for hydrogenation of aryl ketones in IL under mild conditions (1 atm of H₂ (g) and room temperature) and can be reused above 10 times without any loss of catalytic activity.     

Nonenzymatic glucose voltammetric sensor based on gold nanoparticles/carbon nanotubes/ionic liquid nanocomposite

In this paper, a novel nonenzymatic glucose voltammetric sensor based on a kind of nanocomposite of gold nanoparticles (GNPs) embedded in multi-walled carbon nanotubes (MWCNTs)/ionic liquid (IL) gel was reported. The surface morphology of this nanocomposite was characterized using X-ray photoelectron spectrometer (XPS), scanning electron microscope (SEM) and transmission electron microscope (TEM), respectively. It can be found that most of GNPs lie close to the ektexine of MWCNTs and the others have obviously inserted the inner of MWCNTs through the defects or ends of MWCNTs, due to the attraction between GNPs and MWCNTs as well as the repulsion between GNPs and IL. Voltammetry was used to evaluate the electrocatalytic activities of the nanocomposite biosensor toward nonenzymatic glucose oxidation in alkaline media. The GNPs embedded in MWCNTs/IL gel have strong and sensitive voltammetric responses to glucose, owing to a possible synergistic effect among GNPs, MWCNTs and IL. Under the optimal condition, the linear range for the detection of the glucose is 5.0-120 μM with the correlation coefficient of 0.998, based on the oxidation peak observed during cathodic direction of the potential sweep. The kinetics and mechanism of glucose electro-oxidation were intensively investigated in this system. This kind of nanocomposite biosensor is also highly resistant toward poisoning by chloride ions and capable of sensing glucose oxidation in the presence of 20 μM uric acid and 70 μM ascorbic acid. This work provides a simple and easy approach to the detection of glucose in body fluid with high sensitivity and excellent selectivity.     

Effective reductive amination of carbonyl compounds with hydrogen catalyzed by iridium complex in organic solvent and in ionic liquid

The direct reductive amination (DRA) of carbonyl compounds with amines has been achieved using homogenous iridium catalyst and gaseous hydrogen. It appeared that the cationic iridium catalyst, [Ir(cod)₂]BF₄, without any other ligands was sufficient for the reaction. For the DRA of the ketone substrates, an ionic liquid, [Bmim]BF₄, was found to be superior to the other organic solvent used. Especially, the counter anion of the ionic liquid has a significant influence on the selectivity, and at the same time, a high reaction temperature was found to be crucial for the excellent selectivity.     

Determination of chlorogenic acid in coffee using a biomimetic sensor based on a new tetranuclear copper(II) complex

A new tetranuclear copper(II) complex which mimics the active site of catechol oxidase was synthesized and characterized by IR, CHN, electronic spectroscopic and ¹H NMR methods. The title complex [Cu₂(μ-OH)(bpbpmp-NO₂)]₂[ClO₄]₂ was employed in the construction of a novel biomimetic sensor and used in the determination of chlorogenic acid by square wave voltammetry. The performance and optimization of the resulting biomimetic sensor were studied in detail. The best response of this sensor was obtained for 75:15:10% (w/w/w) ratio of the graphite powder:nujol:Cu(II) complex, 0.1 mol L⁻¹ phosphate buffer solution (pH 7.0), with frequency, pulse amplitude, and scan increment at 30 Hz, 100 mV, and 3.0 mV, respectively. The chlorogenic acid concentration was linear in the range of 5.0 × 10⁻⁶ to 1.45 × 10⁻⁴ mol L⁻¹ (r = 0.9985) with a detection limit of 8.0 × 10⁻⁷ mol L⁻¹. This biomimetic sensor demonstrated long-term stability (250 days; 640 determinations) and reproducibility, with a relative standard deviation of 10.0%. The recovery study of chlorogenic acid in coffee samples gave values from 93.2% to 106.1% and the concentrations determined showed good agreement when compared with those obtained using capillary electrophoresis at the 95% confidence level.     

A novel voltammetric sensing platform based on carbon nanotubes-niobium nanoparticles for the determination of chlorogenic acid

A novel voltammetric method was developed for the sensitive determination of chlorogenic acid (CGA) using a glassy carbon electrode (GCE) modified with niobium nanoparticles (NbNPs) and multiwalled carbon nanotubes (CNTs). The analytical techniques such as energy dispersive X-ray analysis (EDX), scanning electron microscopy (SEM) and X-ray diffraction spectroscopy were used for characterizing electrode material. The proposed voltammetric platform exhibited a highly improved redox couple for CGA. The peak separations (ΔE_p) for CGA were 27 mV, 10 mV and 0 mV on the surface of unmodified GCE, CNTs/GCE and NbNPs/CNTs/GCE, respectively. Such a remarkable decrease in the value of ΔE_p at NbNPs/CNTs/GCE showed that the electrode process of CGA has been accelerated at the proposed platform. In addition, a potential difference (ΔE_p) of 0 V observed at the surface of proposed electrochemical platform was a clear indication of the occurrence of a symmetric voltammogram which could be attributed to a fully surface behavior of CGA. In addition, the current responses of CGA versus concentrations were linear in the range of 2.0 × 10⁻⁹ ~ 2.0 × 10⁻⁶ M with a detection limit of 8.2 × 10⁻¹⁰ M. Sensitive detection of CGA in samples is of importance for both scientific and therapeutic reasons due to its potential use for the treatment in many diseases. Therefore, the proposed voltammetric method at NbNPs/CNTs/GCE was applied to food samples.     

反相高效液相色谱法测定罗布麻叶中的绿原酸

采用反相高效液相色谱法(RP-HPLC)在ODS Hypersil(5μm,125 mm×4mm i.d.)色谱柱上以甲醇、体积分数2%HAc为流动相测定了罗布麻叶中的绿原酸。流动相的流速为0.6 mL/min,检测波长为328 nm,建立了回归方程y=11071.10V-27.06,r=0.9999,绿原酸的回收率为98.54%。     

Selective electrooxidation of uric acid in presence of ascorbic acid at a room temperature ionic liquid/nickel hexacyanoferarrate nanoparticles composite electrode

A novel amperometric sensor for the determination of uric acid was fabricated using room temperature ionic liquid and nickel hexacyanoferrate nanoparticle composite which was immobilized on paraffin wax impregnated graphite electrode. The nickel hexacyanoferrate nanoparticle was characterized by UV-vis, X-ray diffraction and field emission scanning electron microscopy. The electrochemical behavior of the modified electrode was investigated in detail by electrochemical impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry. Various experimental parameters influencing the electrochemical behavior of the modified electrode were optimized by varying the supporting electrolyte, scan rate and pH. The apparent electron transfer rate constant (K(s)) and charge transfer coefficient (α) of the modified electrode were found to be 1.358(± 0.02)cm/s and 0.65, respectively from cyclic voltammetry. The sensor exhibited an excellent electrocatalytic activity towards the oxidation of uric acid. The interference from ascorbic acid was easily overcome by coating the modified electrode with PEDOT layer. Under optimal condition, the determination range for uric acid is from 1.0 × 10(-6)M to 2.6 × 10(-3)M and the detection limit was 3.3 × 10(-7)M (3σ). The proposed method has been used for the determination of uric acid in human urine samples.     

Direct electrochemistry and electrocatalysis of hemoglobin on gold nanoparticle decorated carbon ionic liquid electrode

In this paper a carbon ionic liquid electrode (CILE) was fabricated by using ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM]EtOSO₃) as modifier and further gold nanoparticles were in situ electrodeposited on the surface of CILE. The fabricated Au/CILE was used as a new platform for the immobilization of hemoglobin (Hb) with the help of a Nafion film. Electrochemical experimental results indicated that direct electron transfer of Hb was realized on the surface of Au/CILE with a pair of well-defined quasi-reversible redox peaks appeared. The formal peak potential (E⁰′) was obtained as −0.210 V (vs. SCE) in pH 7.0 phosphate buffer solution (PBS), which was the characteristic of Hb heme Fe(III)/Fe(II) redox couple. The fabricated Nafion/Hb/Au/CILE showed excellent electrocatalytic activity to the reduction of trichloroacetic acid (TCA) and the reduction peak current was in proportional to TCA concentration in the range from 0.2 to 18.0 mmol/L with the detection limit as 0.16 mmol/L (S/N = 3). The proposed electrode showed good stability and reproducibility, and it had the potential application as a new third-generation electrochemical biosensor.     

A novel ionic liquid based on small size cation

An ionic liquid material containing small size cation was synthesized and its composition and structure was determined by FT-IR, 1H NMR, 13C NMR and element analysis. However, its physical properties such as melting point, viscosity, conductivity, etc. were measured and the results show that the novel ionic liquid is composed of small cation with highly symmetry and larger anion which is very rare among the reported ionic liquid family.     

Influence of the surfactant bromide of cetyltrimetyl ammonium in the determination of chlorogenic acid in instant coffee and mate tea samples

In this study, two quantitative differential-pulse polarography (DPP) and square-wave voltammetry (SWV) methods were developed to determine total chlorogenic acid (CGA). Studies on this compound involve its reduction at a hanging mercury drop electrode in micellar media—a simple, fast, reliable, and sensitive method. The use of surfactant cationic cetyltrimethylammonium bromide (CTAB) was pivotal to the development of these methods, allowing for satisfactory changes in CGA reduction. The supporting electrolyte which provided the best-defined CGA determination was 0.04-mol L⁻¹ phosphate buffer at pH 6.0 in the presence of CTAB. Based on this use and under optimized conditions, the two new DPP and SWV methods for CGA analysis had detection limits of 2.36 × 10⁻⁷ and 1.34 × 10⁻⁹ mol L⁻¹, respectively, for a pure standard. Analysis of the standard in the presence of treated instant coffee and mate tea samples allowed for good average recovery rates, ranging from 97.06% to 105.90%.     

Effect of the polarity of silver nanoparticles induced by ionic liquids on facilitated transport for the separation of propylene/propane mixtures

The effect of ionic liquids on the formation of a partial positive charge on the surface of silver nanoparticle and its subsequent effect on facilitated olefin transport were investigated. Three different ionic liquids of 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM⁺BF₄⁻), 1-butyl-3-methylimidazolium triflate (BMIM⁺Tf⁻), and 1-butyl-3-methylimidazolium nitrate (BMIM⁺NO₃⁻) were employed to control the positive charge density of the surface of silver nanoparticles. The positive charge density of the silver nanoparticles, as characterized by the binding energy of the silver atom, was in the following order: BMIM⁺BF₄⁻/Ag ? BMIM⁺Tf⁻/Ag > BMIM⁺NO₃⁻/Ag. This order was consistent with the tendency of ionic liquids to form free ions. The best separation performance for the propylene/propane mixtures was a mixed gas selectivity of 17 and a permeance of 7 GPU through a composite membrane consisting of BMIM⁺BF₄⁻/Ag. A better separation performance for olefin/paraffin mixtures was observed with a higher positive charge density of the silver nanoparticles. It was therefore concluded that facilitated olefin transport was a direct consequence of the surface positive charge of the silver nanoparticles induced by ionic liquids.     

Immobilized ionic liquid on superparamagnetic nanoparticles as an effective catalyst for the synthesis of tetrasubstituted imidazoles under solvent-free conditions and microwave irradiation

The ionic liquid 1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride was immobilized on superparamagnetic Fe₃O₄ nanoparticles (IL-MNPs) and used as an efficient heterogeneous catalyst for the one-pot synthesis of 1,2,4,5-tetrasubstituted imidazoles under solvent-free conditions using microwave irradiation. The reactions in conventional heating conditions were compared with the microwave-assisted reactions. The combined merits of microwave irradiation and immobilized ionic liquid on superparamagnetic nanoparticles make the four-component condensation with safe operation, low pollution, and rapid access to products and simple work-up.     

Liquid-liquid equilibria of butyric acid for solvents containing a phosphonium ionic liquid

L/L equilibrium data of butyric acid (BA) in aqueous solutions contacted with the solvents containing ionic liquid (IL), trihexyl-(tetradecyl)phosphonium bis 2,4,4-trimethylpentylphosphinate (Cyphos IL-104), and a related model are presented. IL-104 and its solutions in dodecane were found to be effective solvents of BA. The values of the distribution coefficients of BA were higher than those for solvents with the widely used extractant trioctylamine, especially at low acid concentrations and were also several-fold higher than those of lactic acid (LA). IL extracted BA only in its undissociated form (BAH) at pH well below pK _a of the acid. The loading of IL was independent of IL concentration and it achieved a value higher than four at saturation. Complexes with 1–5 molecules of BA per one IL molecule were supposed in the mass action model in which the reactive formation of complexes (BAH) _p (IL)(H₂O)₂ was supposed. Up to 10 % of the total extracted BA was extracted physically by dodecane as a monomer and dimer, in the solvent. The water content in the organic phase steeply decreased with the BA concentration, which was caused by splitting water-IL reverse micelles due to the formation of the BAH/IL complexes. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Determination of chlorogenic acid in rat blood by microdialysis coupled with microbore liquid chromatography and its application to pharmacokinetic studies

To investigate the pharmacokinetics of unbound chlorogenic acid, a sensitive microbore liquid chromatographic method for the determination of chlorogenic acid in rat blood by microdialysis has been developed. A microdialysis probe was inserted into the jugular vein of male Sprague–Dawley rats, to which chlorogenic acid (20, 40, 60 or 80 mg/kg, i.v.) had been administered. On-line microdialysate was directly injected into a microbore column using a methanol–100 mM sodium dihydrogenphosphate (30:70, v/v, pH 2.5 adjusted with orthophosphoric acid) as the mobile phase and ultraviolet detection at 325 nm. The method is rapid, easily reproduced, selective and sensitive. The limit of detection for chlorogenic acid was 0.01 μg/ml and the limit of quantification was 0.05 μg/ml. The in vivo recovery of the chlorogenic acid of the microdialysis probe, based on a 5 μg/ml standard, was approximately 49–65% (n=6). The disposition of chlorogenic acid at each dose was best fitted to a two-compartment pharmacokinetic model. The area under the concentration curve increased greater than in direct proportion with the dose and terminal disposition become much slower as the dose was increased. The results indicated that the pharmacokinetics of unbound chlorogenic acid in rat blood is non-linear.     

Metalloporphyrin and heteropoly acid catalyzed oxidation of CNOH bonds in an ionic liquid: biomimetic models of nitric oxide synthase

Water soluble iron(III) porphyrins and phosphotungstic acid in an ionic liquid are effective catalysts for the H₂O₂ mediated oxidation of the CNOH bond in N-hydroxyarginine and other oximes. The carbonyl compounds generated as the oxidation products can be easily isolated from the reaction media. These systems serve as biomimetic models of nitric oxide synthase (NOS) and the catalyst immobilized in an ionic liquid can be easily recycled and reused.     

Preparation of chlorogenic acid surface-imprinted magnetic nanoparticles and their usage in separation of Traditional Chinese Medicine

The chlorogenic acid (CGA) surface-imprinted magnetic polymer nanoparticles have been prepared via water-in-oil-in-water multiple emulsions suspension polymerization. This kind of molecularly imprinted polymer nanoparticles (MIPs) had the core-shell structure with the size of about 50 nm. Magnetic susceptibility was given by the successful encapsulation of Fe₃O₄ nanoparticles with a high encapsulation efficiency of 19.3 wt%. MIPs showed an excellent recognition and selection properties for the imprinted molecule CGA. The recognition capacity of MIPs was near three times than that of non-imprinted polymer nanoparticles (NIPs). Compared with the competitive molecule caffeic acid (CFA), the selectivity of MIPs for CGA was 6.06 times as high as that of NIPs. MIPs could be reused and regenerated, and their rebinding amount in the fifth use was up to 78.85% of that in the first use. The MIPs prepared were successfully applied to the separation of CGA from the extract of Traditional Chinese Medicine Honeysuckle.     

Reusable Pd nanoparticles immobilized on functional ionic liquid co-polymerized with styrene for Suzuki reactions in water-ethanol solution

Co-polymer of 3-(2,3-dihydroxypropyl)-1-vinylimidazolium chloride and styrene was synthesized and used as a support of Pd nanoparticles. The Pd@poly-Sty-co-diOH-Cl catalyst can efficiently catalyze Suzuki reactions for a wide range of aryl iodides and bromides with 0.05 mol % Pd at 70 °C in water-ethanol solution under air, and the catalyst can be recycled and reused for several times without significant loss of activity.