微流控芯片计算机辅助设计、辅助制造方法研究

介绍了一种采用计算机辅助制造中快速成型技术实现微流控芯片快速制作的方法。采用VB二次开发工具(VBA),在计算机辅助设计(CAD)二次开发平台上建立微流控芯片三维CAD立体模型,并通过计算机软件算法对CAD模型进行分层切片,为实现微流控芯片计算机辅助制造提供加工数据。文中针对微流控芯片加工精度要求高的特点,提出了采用位图数据图像格式(BMP)数据格式取代快速成型分层切片中常用的三角面片数据格式(STL),并对具体实现方法进行了详细介绍。     

Microchip based sample treatment device interfaced with ICP-MS for the analysis of transition metals from environmental samples

A downscaled solid phase (SPE) device applicable for sample preparation prior to ICP-MS monitoring, have been constructed making use of the lab on a chip concept. Standard photolithography and wet chemical etching were used to fabricate glass microfluidic devices accommodating three microchannels, each of them incorporating a defined section that could be packed with SPE materials; selective chelating resin. The microfluidic device was interfaced with the ICP-MS instrument throughout a low flow rate concentric nebuliser using a Teflon connector, and coupled with a flow injection manifold delivering samples and reagents via a manually operated splitting valve. The feasibility of the miniaturized prototype to perform SPE of trace metals was proved by analyzing trace metals, Cd, Co, and Ni, in seawater reference materials; CASS-2 and SLEW-1. The obtained result was in good agreement with the certified values. The device could be used as a remote miniaturized sample treatment for field work.     

Evaluation of photodynamic therapy (PDT) procedures using microfluidic system

A hybrid PDMS/glass microfluidic system for evaluation of the efficiency of photodynamic therapy is presented. 5-aminolevulinic acid (ALA) was used as a precursor of photosensitizer. The geometry of the microdevice presented in this paper enables to test different concentrations of the photosensitizer in a single assay. The viability of the A549 cells was determined 24 h after PDT procedure (irradiation with light which induced a photosensitizer accumulated in carcinoma cells, λ = 625 nm). The presented results confirmed the possibility to perform the photodynamic therapy process in vitro in microscale and the possibility to assess its effectiveness. Moreover, because two identical microstructures on a single chip were performed, the microchip can be used for examination simultaneously various cell lines (carcinoma and normal) or various photosensitizers.     

Review on recent applications of the liquid waveguide capillary cell in flow based analysis techniques to enhance the sensitivity of spectroscopic detection methods

Incorporation of long path length liquid waveguide capillary cell (LWCC or LCW) into spectrometric detection systems can increase the sensitivity of these by orders of magnitude (up to 500 times), and consequently can reduce the detection limits. The combination of the long path length spectrophotometry with flow methodologies can provide analytical solutions for various challenges in the field of environmental, biochemical and food chemistry.     

Inverse‐Opal Conducting Polymer Monoliths in Microfluidic Channels

Inverse opal monolithic flow‐through structures of conducting polymer (CP) were achieved in microfluidic channels for lab‐on‐a‐chip (LOC) applications. In order to achieve the uniformly porous monolith, polystyrene (PS) colloidal crystal (CC) templates were fabricated in microfluidic channels. Consequently, an inverse opal polyaniline (PANI) structure was achieved on‐chip, through a two‐step process involving the electrochemical growth of PANI and subsequent removal of the template. In this work the effect of CP electropolymerisation time on these structures is discussed. It was found that growth time is critical in achieving an ordered structure with well‐defined flow‐through pores. This is significant as these optimised porous structures will allow for maximising the surface area of the monolith and will also result in well‐defined flow profiles through the microchannel.     

A novel long path length absorbance spectroscopy for the determination of ultra trace organophosphorus pesticides in vegetables and fruits

A simple, rapid, sensitive and reproducible spectrophotometry for determination of ultra trace organophosphorus pesticides (OPs) with liquid core waveguide light intensity technique is presented. OPs were degraded into phosphate with UV light, potassium peroxydisulphate as oxidant and nanosized titanium dioxide as catalyst. Under the optimum selected conditions, linear light intensity response was obtained in the range of 2.0 x 10(-11) to 8.0 x 10(-10)g mL(-1) phosphate, and the limit of detection (LOD) 6.7 x 10(-12)g mL(-1) was achieved. Both the low limit of linear range and the LOD of the proposed method were lower over 1000-fold than that of classical spectrophotometry. The proposed method was applied to the determination of ultra trace OPs in vegetables and fruits samples.     

Effect of oxidant type on the chemiluminescence intensity from the reaction of tris(2,2′-bipyridyl)ruthenium(III) with various organic acids

An investigation into the chemiluminescence of fourteen organic acids and tris(2,2′-bipyridyl)ruthenium(II) was undertaken. Particular emphasis was placed upon the method of production of the reagent, tris(2,2′-bipyridyl)ruthenium(III), with cerium(IV) sulfate, potassium permanganate, lead dioxide and electrochemical generation. Analytically useful chemiluminescence was observed when Ce(IV) or potassium permanganate were employed as oxidants. The kinetics of analyte oxidation was related to the intensity of the chemiluminescence emission, which increased by three orders of magnitude for tartaric acid after 40 h of oxidation.     

Determination of sophoridine and related lupin alkaloids using tris(2,2′-bipyridine)ruthenium electrogenerated chemiluminescence

Electrogenerated chemiluminescences (ECLs) based on tris(2,2′-bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) and lupin alkaloids, for instance, sophoridine (SRI), matrine (MT), sophoranol (SR) and sophocarpine (SC) in an aqueous alkaline buffer solution (pH 9.0) are studied. The light emission is mainly caused by an electro-oxidation reaction between tertiary amino group on the alkaloid compounds and Ru(bpy)₃²⁺ in a thin layer flow cell equipped with a glassy carbon disc electrode (22.1 mm²) at the potential of +1.50 V (versus Ag/AgCl). The luminescence wavelength of 610 nm confirmed that ECL is caused by Ru(bpy)₃^2+∗ to its ground state. ECL intensities of these lupin alkaloids are affected by the substituent character, three-dimensional conformation of hydrogen on β-carbon atom. Ionization potentials taken from calculation data further confirm the experimental results. In addition, the factors affecting the determination and HPLC separation of the four alkaloids are also investigated.     

A series of silver coordination polymers constructed from flexible bis(benzimidazole) ligands and different carboxylates

In this article, eight new silver coordination polymers constructed from two structurally related ligands, 1,1′-(1,4-butanediyl)bis(2-methylbenzimidazole) (bbmb) and 1,1′-(1,4-butanediyl)bis(2-ethylbenzimedazole) (bbeb), have been synthesized: [Ag(L1)(bbmb)]·C₂H₅OH·H₂O (1), [Ag(L2)(bbmb)]·C₂H₅OH (2), [Ag(L3)(bbmb)] (3), [Ag₂(L4)(bbmb)₂]·C₂H₅OH (4), [Ag(L2)(bbeb)]·C₂H₅OH (5), [Ag(L5)(bbeb)]·CH₃OH (6), [Ag₂(L6)₂(bbeb)]·H₂O (7), and [Ag₂(L7)(bbeb)₂]·4(H₂O) (8), where L1 = benzoate anion, L2 = p-methoxybenzoate anion, L3 = 2-amino-benzoate anion, L4 = oxalate anion, L5 = cinnamate ainon, L6 = 3-amino-benzoate anion, and L7 = fumaric anion. In 1-3, 5 and 6, the bidentate N-donor ligands (bbmb and bbeb) in trans conformations bridge neighboring silver centers to form 1D single chain structures. The carboxylate anions are attached on both sides of the chains. Moreover, 1 and 3 are extended into 2D layers, while 2 and 6 are extended into 3D frameworks through π-π interactions. In 4, the bbmb ligands bridge adjacent Ag(I) centers to form -Ag-bbmb-Ag- chains, which are further connected by L4 anions to form a 2D layer. The resulting layers are extended into 3D frameworks through strong π-π interactions. In 7, the N-donor ligands (bbeb) in trans conformations bridge two silver centers to generate a [Ag₂(bbeb)]²⁺ unit. The adjacent [Ag₂(bbeb)]²⁺ units are further connected via the L6 anions to form a 1D ladder chain. Moreover, the structure of compound 7 is extended into a 3D framework through hydrogen bonding and π-π interactions. In 8, two Ag(I) cations are bridged by two bbeb ligands in cis conformations to form a [Ag₂(bbeb)₂]²⁺ ring, which are further linked by L7 anions to generate a 1D string chain. Furthermore, the hydrogen bonding and π-π interactions link L7 anions to form a 2D supramolecular sheet. Additionally, the luminescent properties of these compounds were also studied.     

玻璃芯片上温控微阀的制备和微流体控制性能研究

聚N-异丙基丙烯酰胺(PNIPAAm)在临界温度(32 ℃)附近会发生敏锐的相变, 导致其体积和表面亲疏水性的突变. 利用这种由温度刺激引起的体积变化, 可以控制微通道内微流体的运动状态. 本文以2-羟基-2-甲基-1-苯基丙酮为引发剂, 水-乙醇混合体系为溶剂, 在玻璃芯片通道内局部区域以紫外光诱导聚合PNIPAAm整体柱塞, 制备温控微阀. 系统地考察了聚合条件对该阀的形态和性能的影响. 在此基础上, 建立了一个芯片上的集成化单温控阀流动注射分析模型, 利用镁离子与荧光探针O,O'-二羟基偶氮苯的螯合荧光反应, 表征温控微阀的控流效果. 结果表明, 所制作的微阀温控效果良好, 在微流控领域有应用前景.     

Determination of β-blockers in pharmaceutical preparations and human urine by high-performance liquid chromatography with tris(2,2′-bipyridyl)ruthenium(II) electrogenerated chemiluminescence detection

A highly selective and sensitive detection method based on tris(2,2′-bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺] electrogenerated chemiluminescence (ECL) has been developed for the quantitative determination of β-blockers in both pharmaceutical preparations and human urine samples. The ECL emission is based on the reaction between electro-oxidized Ru(bpy)₃³⁺ and the secondary amino groups on the β-blockers. The ECL intensities for the β-blockers were strongly dependent on the pH at which the ECL detections were conducted, with the maximum intensities being obtained at pH 9.0. Under the optimal condition, the detection limit for atenolol and metoprolol were almost 0.5 μM (50 pmol) and 0.08 μM (8 pmol), respectively, with S/N of 3 and a linear working range that extends four orders of magnitude with relative standard deviations below 5% for 10 replicate injected samples. The concentrations of atenolol and metoprolol were determined in pharmaceutical preparations using flow injection analysis with Ru(bpy)₃²⁺ ECL detection based on standard addition method. The determined values by the present method showed acceptable agreement with the stated values by manufacturers. The determination of the five β-blockers in human urine samples was performed using HPLC-Ru(bpy)₃²⁺ ECL detection. The resulting chromatogram was much simpler than that obtained with HPLC-UV absorbance detection.     

Determination of sodium oxalate in Bayer liquor using flow-analysis incorporating an anion exchange column and tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection

Semi-automated flow injection instrumentation, incorporating a small anion exchange column coupled with tris(2,2′-bipyridyl)ruthenium(II) (Ru(bipy)₃²⁺) chemiluminescence detection, was configured and utilised to develop rapid methodology for the determination of sodium oxalate in Bayer liquors. The elimination of both negative and positive interferences from aluminium(III) and, as yet, unknown concomitant organic species, respectively are discussed. The robustness of the methodology was considerably enhanced by using the temporally stable form of the chemiluminescence reagent, tris(2,2′-bipyridyl)ruthenium(III) perchlorate in dry acetonitrile. Real Bayer process samples were analysed and the results obtained compared well with those performed using standard methods within industrial laboratories.     

Preliminary evaluation of monolithic column high-performance liquid chromatography with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection for the determination of quetiapine in human body fluids

High-performance liquid chromatography (HPLC) with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection methodology is reported for the determination of the atypical antipsychotic drug quetiapine and the observation of its major active and inactive metabolites in human urine and serum. The method uses a monolithic chromatographic column allowing high flow rates of 3 mL min⁻¹ enabling rapid quantification. Flow injection analysis (FIA) with tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection and HPLC time of flight mass spectrometry (TOF-MS) were used for the determination of quetiapine in a pharmaceutical preparation to establish its suitability as a calibration standard. The limit of detection achieved with FIA was 2 × 10⁻¹¹ mol L⁻¹ in simple aqueous solution. The limits of detection achieved with HPLC were 7 × 10⁻⁸ and 2 × 10⁻¹⁰ mol L⁻¹ in urine and serum, respectively. The calibration range for FIA was between 5 × 10⁻⁹ and 1 × 10⁻⁶ mol L⁻¹. The calibration ranges for HPLC were between 1 × 10⁻⁷-1 × 10⁻⁴ and 1 × 10⁻⁸-1 × 10⁻⁴ mol L⁻¹ in urine and serum, respectively. The quetiapine concentrations in patient samples were found to be 3 × 10⁻⁶ mol L⁻¹ in urine and 7 × 10⁻⁷ mol L⁻¹ in serum. Without the need for preconcentration, the HPLC detection limits compared favourably with those in previously published methodologies. The metabolites were identified using HPLC-TOF-MS.     

A sensitive semi-micro column HPLC method with peroxyoxalate chemiluminescence detection and column switching for determination of MDMA-related compounds in hair

A sensitive semi-micro column HPLC method with peroxyoxalate chemiluminescence (POCL) detection and column switching has been developed for simultaneous determination of 3,4-methylenedioxymethamphetamine (MDMA) and related compounds, for example 3,4-methylenedioxyamphetamine, methamphetamine, and amphetamine, in hair. After digestion of the hair with 1 mol L⁻¹ sodium hydroxide the compounds were extracted with n-heptane and derivatized with 4-(N,N-dimethylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole. A mixture of hydrogen peroxide and bis(2,4,5-trichloro-6-carbopentoxyphenyl)oxalate in acetonitrile was used as post-column CL reagent. Calibration plots showed linearity was good (r = 0.999); detection limits were 0.02–0.16 ng mg⁻¹ hair at a signal-to-noise ratio of 3. The precision of the method, as RSD (n = 5), in intra-day and inter-day assays was better than 5.0 and 6.9%, respectively. The proposed method was sufficiently sensitive to detect low ng mg⁻¹ levels of MDMA and related compounds in hair, and could be used for quantification of the compounds in hair samples from patients treated in a chemical dependency unit.     

Fluorine cleavage of the light blue heteroleptic triplet emitter FIrpic

The lifetime stability of devices containing FIrpic as emitter has been a major concern for organic blue light emitting devices (OLEDs). To gain a deeper knowledge about the purity of FIrpic (bis[2-(4,6-difluorophenyl)pyridyl-N,C2′]iridium (III)) emitters and how the purity is influenced by sublimation steps, non-sublimated and sublimated FIrpic material was analyzed via liquid chromatography coupled with electron spray ionization mass spectrometry (LC/ESI/MS). Cleavage of an electron-withdrawing group from one of the ligands of the heteroleptic phosphorescent emitter could be identified in sublimated FIrpic material via LC/ESI/MS. A detailed chemical analysis using LC/ESI/MS was carried out for complete blue emitting devices of the following structure: indium-tin-oxide (ITO)/50 nm (α-4,4′-bis[(1-naphthyl)phenylamino]-1,1′-biphenyl) (α-NPD)/10 nm 4,4′,4″-tris(carbazol-9-yl)triphenylamine (TCTA)/100 nm TCTA:8% FIrpic/50 nm 1,1′-biphenyl-4′-oxy)-bis(8-hydroxy-2-methylquinolinato)-aluminum (BAlq)/1 nm LiF/100 nm Al. Two isomers of (FIrpic-1F) could be detected in an aged OLED. Changes in the ligand systems of FIrpic, especially the loss of fluorine during the deposition process can alter the emissive properties of the blue phosphorescent emitter. Beside isomer formation and chemical degradation of FIrpic, substantial degradation was observed for the hole transport material α-NPD in driven OLEDs.     

High throughput method for the analysis of cetrizine hydrochloride in pharmaceutical formulations and in biological fluids using a tris(2,2'-bipyridyl)ruthenium(II)-peroxydisulphate chemiluminescence system in a two-chip device

A fast, economic and sensitive chemiluminescence (CL) method has been developed for the analysis of cetrizine hydrochloride (CET) in pharmaceutical formulations and in biological fluids. The CL method is based on the oxidation of tris(2,2′-bipyridyl)ruthenium(II) (Ru (bipy)₃²⁺) by peroxydisulphate in a two-chip device. Up to 180 samples can be analysed per hour, consuming only minute quantities of reagents. Three instrumental setups were tested to find the most economical, sensitive and high throughput setup. In the first setup, a continuous flow of sample and CL reagents was used, whereas in the second setup, a fixed volume (2 μL) of (Ru (bipy)₃²⁺) was introduced into a continuous infusion of peroxydisulphate and the sample. In the third design, a fixed volume of sample (2 μL) was injected while the CL reagents were continuously infused. Compared to the first setup, a 200% signal enhancement was observed in the third setup. Various parameters that influence the CL signal intensity, including pH, flow rates and reagent concentrations, were optimized. A linear response was observed over the range of 50 μg L⁻¹ to 6400 μg L⁻¹ (R² = 0.9959) with RSD values of 1.1% (n = 15) for 1000 μg L⁻¹. The detection limit was found to be 15 μg L⁻¹ (S/N = 3). The amount of consumed sample was only 2 μL, from which the detected amount of CET was found to be 6.5 × 10⁻¹⁴ mol. This procedure was successfully applied to the analysis of CET in pharmaceutical formulations and biological fluids.     

Quality control of PET radiopharmaceuticals by high‐performance liquid chromatography with tris(2,2′‐bipyridyl)ruthenium(II) electrogenerated chemiluminescence detection

A highly sensitive reversed‐phase liquid chromatographic (HPLC) method was investigated to analyze a range of positron emission tomography (PET) radiopharmaceuticals using electrogenerated chemiluminescence (ECL) detection. ECL is based on the reaction of PET molecules with tris(2,2′‐bipyridyl)ruthenium(III) [Ru(bpy)₃³⁺], which is generated through the on‐line electro‐oxidation of Ru(bpy)₃²⁺. In 21 different radiopharmaceuticals studied, 18 compounds could be detected with detection limits (signal‐to‐noise ratio = 3) of 0.12–72 ng/mL per 20 μL injection. Sufficient reproducibility and linearity were obtained for the quantitative determination of PET molecules in pharmaceutical fluid. This method could be successfully applied to quality control tests of PET radiopharmaceuticals with ultra‐high specific radioactivity. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of proline in wine using flow injection analysis with tris(2,2'-bipyridyl)ruthenium(II) chemiluminescence detection

Flow injection methodology is described for the determination of proline in red and white wines using tris(2,2′-bipyridyl)ruthenium(II) chemiluminescence detection. Selective conditions were achieved for proline at pH 10, while other amino acids and wine components did not interfere. The precision of the method was less than 1.00% (R.S.D.) for five replicates of a standard (4 × 10⁻⁶ M) and the detection limit was 1 × 10⁻⁸ M. The level of proline in white and sparkling wines using the developed methodology was equivalent to those achieved using HPLC-FMOC amino acid analysis. SPE removal of phenolic material was required for red wines to minimize Ru(bipy)₃³⁺ consumption and its associated effect on accuracy.     

Synthesis of fulleropyrrolidine dicarboxylic acid and its scavenging activity to superoxide radicals (O_2 ^{\bar \cdot } )

Photochemical reaction of C60 with iminodiacetic ester (NH(CH₂COOR)₂, R=Me, Et, t-Bu) produced fulleropyrrolidine derivatives 2 in a 55%–36% yield (based on consumed C60). The reaction activity correlated with the steric hindrance of R groups. The order of the reaction rates decreased from Me to t-Bu (R=Me>Et>t-Bu). Fulleropyrrolidine derivative 2 (R=Me) were hydrolyzed with NaH and methanol in toluene, and then acidified with HCl to result in the corresponding fulleropyrrolidine dicarboxylic acid 3 in a 65% yield (relative to fulleropyrrolidine derivative 2). C60 derivatives 2 and 3 were structurally characterized by ¹H NMR, ¹³C NMR, IR, and elementary analysis, MS. A chemiluminescence technique was applied to study the effects of their scavenging superoxide radicals generated by pyrogallol autoxidation. The results show fulleropyrrolidine dicarboxylic acid 3 had scavenging activity and the efficiencies were dependent on their concentrations. At the concentration of 3.0×10⁻⁴ mol·L⁻¹, fulleropyrrolidine dicarboxylic acid 3 showed a radical scavenging efficiency of approximately 70%. Finally, the influence of structure factor on the scavenging activity was discussed. The results show that the monoadduct of C60, owing to keeping almost intact double bands in C60 moiety, had obvious scavenging activity for superoxide radicals . __________ Translated from Chinese Journal of Applied Chemistry, 2006, 23(1) (in Chinese)