The addition of functionalized graphene oxide to polyetherimide to improve its thermal conductivity and mechanical properties

The thermal and electrical conductivity and mechanical properties of polyetherimide (PEI) containing either alkyl‐aminated (enGO) or phenyl‐aminated graphene (pnGO) oxides were studied. A solution casting method was used to prepare functionalized graphene oxide/PEI composites with different filler contents. The introduction of functionalized graphene oxide to the PEI matrix improved the thermal conductivity, electrical conductivity, and mechanical properties. The thermal conductivities of the enGO 3 wt%/PEI and pnGO 3 wt%/PEI composites were 0.324 W/mK and 0.329 W/mK, respectively, due to the high thermal conductivity of the graphene‐based materials and the strong interface adhesion due to the filler surface treatment between the fillers and the matrix. The electrical conductivities of the functionalized graphene oxide/PEI composites were larger than that of PEI, but the electrical conductivity values were generally low, which is consistent with the magnitude of the insulator. The strong interfacial adhesion between the fillers and the matrix led to improved mechanical properties. Copyright © 2014 John Wiley & Sons, Ltd.     

Carbon black,multiwall carbon nanotubes,expanded graphite and functionalized graphene flame retarded polypropylene nanocomposites

Herein, we examine the influence of adding functionalized graphene (FG), distinct expanded graphites and carbon nanofillers such as carbon black and multiwall carbon nanotubes on mechanical properties, morphology, pyrolysis, response to small flame and burning behavior of a V‐2 classified flame‐retarded polypropylene (PP). Among carbon fillers, FG and multilayer graphene (MLG) containing fewer than 10 layers are very effectively dispersed during twin‐screw extrusion and account for enhanced matrix reinforcement. In contrast to the other fillers, no large agglomerates are detected for PP‐FR/FG and PP‐FR/MLG, as verified by electron microscopy. Adding FG to flame‐retardant PP prevents dripping due to reduced flow at low shear rates and shifts the onset of thermal decomposition to temperatures 40°C higher. The increase in the onset temperature correlates with the increasing specific surface areas (BET) of the layered carbon fillers. The reduction of the peak heat release rate by 76% is attributed to the formation of effective protection layers during combustion. The addition of layered carbon nanoparticles lowers the time to ignition. The presence of carbon does not change the composition of the evolved pyrolysis gases, as determined by thermogravimetric analysis combined with online Fourier‐transformed infrared measurements. FG and well‐exfoliated MLG are superior additives with respect to spherical and tubular carbon nanomaterials. Copyright © 2013 John Wiley & Sons, Ltd.     

石墨烯导热研究进展

石墨烯具有目前已知材料中最高的热导率,在电子器件、信息技术、国防军工等领域具有良好的应用前景。石墨烯导热的理论和实验研究具有重要意义,在最近十年间取得了长足的发展。本文综述了石墨烯本征热导率的研究进展及应用现状。首先介绍应用于石墨烯热导率测量的微纳尺度传热技术,包括拉曼光谱法、悬空热桥法和时域热反射法。然后展示了石墨烯热导率的理论研究成果,并总结了石墨烯本征热导率的影响因素。随后介绍石墨烯在导热材料中的应用,包括高导热石墨烯膜、石墨烯纤维及石墨烯在热界面材料中的应用。最后对石墨烯导热研究的成果进行总结,提出目前石墨烯热传导研究中存在的机遇与挑战,并展望未来可能的发展方向。     

电化学法制备石墨烯及其复合材料

石墨烯是一种具有优异物理和化学性质的新型二维碳纳米材料,大规模低成本制备高品质石墨烯的方法是其能够得到广泛实际应用的重要前提. 电化学方法可以快捷、绿色无污染、批量制备高质量的石墨烯及其复合材料. 本综述在对石墨烯各种制备方法进行简要比较之后,对近年来石墨烯、石墨烯/无机纳米复合材料、石墨烯/聚合物复合材料以及类石墨烯材料的电化学法制备进展进行介绍并作了展望.     

Reactive copolymer functionalized graphene sheet for enhanced mechanical and thermal properties of epoxy composites

Uniform dispersion of graphene nanosheets (GNS) in a polymer matrix with strong filler–matrix interfacial interaction, preserving intrinsic material properties of GNS, is the critical factor for application of GNS in polymer composites. In this work, a novel reactive copolymer VCz–GMA containing carbazole and epoxide group was designed, synthesized and employed to noncovalently functionalize GNS for preparing epoxy nanocomposites with enhanced mechanical properties. The presence of carbazole groups in VCz–GMA enables the tight absorption of copolymer on to graphene surface via π–π stacking interaction, as evidenced by Raman and fluorescence spectroscopy, whereas the epoxide segments chemically reacts with the epoxy matrix, improving the compatibility and interaction of graphene with epoxy matrix. As a result, the VCz–GMA–GNS/epoxy composite showed a remarkable enhancement in both mechanical and thermal property than either the pure epoxy or the graphene/epoxy composites. The incorporation of 0.35 wt % VCz–GMA–GNS yields a tensile strength of 55.72 MPa and elongation at break of 3.45, which are 42 and 191% higher than the value of pure epoxy, respectively. Increased glass transition temperature and thermal stability of the epoxy composites were also observed. In addition, a significant enhancement in thermal conductivity was achieved with only 1 wt % VCz–GMA–GNS loading. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2776–2785     

Low contents of graphite improving general properties of poly(vinylidene fluoride)

Studies on graphite flakes with a lateral size greater than 50 μm, having a large number of stacked collapse blocks, are neglected and replaced by graphene nanosheets or by powdered graphite, which can be obtained from graphite through chemical or physical exfoliation, as filler in polymer composites. Besides, the production of graphene nanosheets or the purification of powdered graphite uses a high concentration of strong and toxic acids that pollutes the environment. These processes are extremely time-consuming and generate an expensive product. Composites of poly(vinylidene fluoride) (PVDF) were prepared via extrusion with graphite flakes with up to 60 μm thick and 700 μm lateral size, in the range from 0.1 to 5% m/m. The quality of graphite flakes was analyzed by thermogravimetric analysis, x-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy, and scanning electron microscopy. The increase in the graphite content in the PVDF matrix improved thermal resistance while showed an increase in the degree of crystallinity up to 25% by XRD and 43% by differential scanning calorimetry, approximately. Although the graphite acted as a nucleating agent, the content of the PVDF beta phase did not change. In the composites with up to 2.0% of graphite, a significant increase in mechanical properties, 13% modulus, and 36% in the storage modulus, evaluated by thermodynamic-mechanical analysis and tensile tests. In the analyses of time-domain nuclear magnetic resonance and oscillatory rheology in parallel plates, it was noticed that the increase of mechanical properties is due to the reinforcing effect along with the lubricant protection of stacked graphene sheets, attenuating the stress and friction between the polymer chains. Therefore, even though graphite flakes are inexpensive, that filler without any treatment at low contents are capable of significantly improving the performance of PVDF. This work suggests that these composites could be employed in applications such as electrical insulator with less energy dissipation, and also in oil pipelines, specifically to replace PVDF-based terpolymers or mixtures thereof, and polyamide-11 in flexible risers as a barrier layer, improving their performance.     

石墨烯/环氧复合材料导热性能的研究进展

石墨烯作为时下最热门的纳米材料,吸引了国内外众多科研工作者的注意力。而石墨烯所具有的超高导热性能,使其在环氧导热复合材料中有着巨大的应用前景。本文主要综述了当前石墨烯/环氧复合材料导热性能的研究进展,详细介绍了石墨烯的尺寸、与其它填料的复配以及石墨烯表面改性等因素对导热性能的影响。此外,还分析了复合材料的微观结构对导热性能的影响。最后,对导热型石墨烯/环氧复合材料的发展进行了展望,并指出了该领域存在的技术难点和未知机理。     

Poly(methyl methacrylate)-Assisted Exfoliation of Graphite and Its Use in Acrylonitrile-Butadiene-Styrene Composites

One of the applications of graphene in which its scalable production is of utmost importance is the development of polymer composites. Among the techniques used to produce graphene flakes, the liquid-phase exfoliation (LPE) of graphite stands out due to its versatility and scalability. However, solvents suitable for the LPE process are generally toxic and have a high boiling point, making the processing challenging. The use of low boiling point solvents could be convenient for the processing, due to the easiness of their removal. In this study, the use of poly(methyl methacrylate) (PMMA) as a stabilizing agent is proposed for the production of graphene flakes in a low boiling point solvent, that is, acetone. The graphene dispersions produced in the mixture acetone-PMMA have higher concentration, +175 %, and contain a higher percentage of few-layer graphene flakes (<5 layers), that is, +60 %, compared to the dispersions prepared in acetone. The as-produced graphene dispersions are used to develop graphene/acrylonitrile-butadiene-styrene composites. The mechanical properties of the pristine polymer are improved, that is, +22 % in the Young's modulus, by adding 0.01 wt. % of graphene flakes. Moreover, a decrease of ≈20 % in the oxygen permeability is obtained by using 0.1 wt. % of graphene flakes filler, compared to the unloaded matrix.     

Epoxy nanocomposites with high thermal conductivity and low loss factor: Realize 3D thermal conductivity network at low content through core-shell structure and micro-nano technology

Dielectric polymers with high thermal conductivity are very promising in the fields of aerospace and electronic device packaging. However, composites with excellent dielectric properties usually have low thermal conductivity. It is usually to fill the polymer with thermal conductivity particles to improve the thermal conductivity, but the high content of filler often reduces the mechanical properties of the polymer. In this paper, the traditional insulating polymer epoxy resin was used as the matrix, by covering the surface of silicon carbide with graphene to form a core-shell structure and co-filled with nano diamonds to achieve the preparation of high-performance epoxy resin at low content. The results showed that at the filling content of 30 wt%, the thermal conductivity of epoxy nanocomposites showed a dramatic thermal conductivity enhancement of 1263%, the energy storage modulus increased by 1.1 GPa, and the dielectric loss remained unchanged at 50 Hz. The advantages of the composite are the structural design and surface modification of the filler, which not only take advantage of its inherent advantages, but also improve the interface area with the epoxy matrix. The composite materials with excellent properties are expected to provide theoretical guidance for the application of high thermal conductivity dielectric materials.     

Thermal conductivity anisotropy of expanded graphite/ chlorate salt composites for thermal energy storage

ABSTRACT

Expanded graphite (EG)/LiCl-NaCl phase change composites are prepared by aqueous solution method with different EG amount and forming pressure to enhance heat conduction for high-temperature latent heat thermal energy storage application. Their microstructure and thermal conductivity are characterized. Results indicate that the composites are uniform and the LiCl-NaCl eutectic is well dispersed in the graphite flakes. Thermal conductivity of the LiCl-NaCl can increase to as much as 40.51 W/(m·K), which is 46 times higher than that of pure eutectic salt. With forming pressure, the thermal conductivities of the samples show anisotropy because of a flattened irregular honeycomb network of graphite. Within certain limits, the greater the forming pressure is, the more pronounced the anisotropy performs. In addition, the formulas to calculate the thermal conductivity in the axial direction and the radial direction are given based on the average rotation angle φ of EG basal plane, and experimental data show that the formula in the radial direction is especially useful for calculating the thermal conductivity.     

Thermal properties enhancement of epoxy resins by incorporating polybenzimidazole nanofibers filled with graphene and carbon nanotubes as reinforcing material

Enhancement of thermal properties of epoxy resins was achieved by incorporation of polybenzimidazole (PBI) fibermats filled with carbon nanomaterials, prepared by the solution electrospinning technique. Different type of carbon nanostructures (carbon nanotubes, graphite flakes, graphene nanoplatelets and carbon black) were compared as fillers in polybenzimidazole fibers. The carbon-PBI-fibermats showed remarkable thermal transport properties and therefore, they were studied as thermal reinforcement material for epoxy composites. Mechanical and thermal properties of produced composites were evaluated and the effectiveness of different types of carbon fillers examined. Results showed that the produced carbon filled fibermats can be used effectively as a thermal reinforcing material in epoxy resins, offering several advantages.     

Thermal conductivity of exfoliated graphite nanocomposites

Since the late 1990’s, research has been reported where intercalated, expanded, and/or exfoliated graphite nanoflakes could also be used as reinforcements in polymer systems. The key point to utilizing graphite as a platelet nanoreinforcement is in the ability to exfoliate graphite using Graphite Intercalated Compounds (GICs). Natural graphite is still abundant and its cost is quite low compared to the other nano–size carbon materials, the cost of producing graphite nanoplatelets is expected to be ~$5/lb. This is significantly less expensive than single wall nanotubes (SWNT) (>$45000/lb) or vapor grown carbon fiber (VGCF) ($40–50/lb), yet the mechanical, electrical, and thermal properties of crystalline graphite flakes are comparable to those of SWNT and VGCF. The use of exfoliated graphite flakes (xGnP) opens up many new applications where electromagnetic shielding, high thermal conductivity, gas barrier resistance or low flammability are required. A special thermal treatment was developed to exfoliate graphite flakes for the production of nylon and high density polypropylene nanocomposites. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to assess the degree of exfoliation of the graphite platelets and the morphology of the nanocomposites. The thermal conductivity of these composites was investigated by three different methods, namely, by DSC, modified hot wire, and halogen flash lamp methods. The addition of small amounts of exfoliated graphite flakes showed a marked improvement in thermal and electrical conductivity of the composites.     

The investigation of thermal conductivity and energy storage properties of graphite/paraffin composites

Phase change materials (PCM) have been extensively scrutinized for their widely application in thermal energy storage (TES). Paraffin was considered to be one of the most prospective PCMs with perfect properties. However, lower thermal conductivity hinders the further application. In this letter, we experimentally investigate the thermal conductivity and energy storage of composites consisting of paraffin and micron-size graphite flakes (MSGFs). The results strongly suggested that the thermal conductivity enhances enormously with increasing the mass fraction of the MSGFs. The formation of heat flow network is the key factor for high thermal conductivity in this case. Meanwhile, compared to that of the thermal conductivity, the latent heat capacity, the melting temperature, and the freezing temperature of the composites present negligible change with increasing the concentration of the MSGFs. The paraffin-based composites have great potential for energy storage application with optimal fraction of the MSGFs.     

参杂缺陷石墨烯的高分子复合材料导热特性分子动力学模拟

Polymers are widely used advanced materials composed of macromolecular chains, which can be found in materials used in our daily life. Polymer materials have been employed in many energy and electronic applications such as energy harvesting devices, energy storage devices, light emitting and sensing devices, and flexible energy and electronic devices. The microscopic morphologies and electrical properties of the polymer materials can be tuned by molecular engineering, which could improve the device performances in terms of both the energy conversion efficiency and stability. Traditional polymers are usually considered to be thermal insulators owing to their amorphous molecular chains. Graphene-based polymeric materials have garnered significant attention due to the excellent thermal conductivity of graphene. Advanced polymeric composites with high thermal conductivity exhibit great potential in many applications. Therefore, research on the thermal transport behaviors in graphene-based nanocomposites becomes critical. Vacancy defects in graphene are commonly observed during its fabrication. In this work, the effects of vacancy defects in graphene on thermal transport properties of the graphene-polyethylene nanocomposite are comprehensively investigated using molecular dynamics (MD) simulation. Based on the non-equilibrium molecular dynamics (NEMD) method, the interfacial thermal conductance and the overall thermal conductance of the nanocomposite are taken into consideration simultaneously. It is found that vacancy defects in graphene facilitate the interfacial thermal conductance between graphene and polyethylene. By removing various proportions of carbon atoms in pristine graphene, the density of vacancy defects varies from 0% to 20% and the interfacial thermal conductance increases from 75.6 MW·m⁻²·K⁻¹ to 85.9 MW·m⁻²·K⁻¹. The distinct enhancement in the interfacial thermal transport is attributed to the enhanced thermal coupling between graphene and polyethylene. A higher number of broken sp² bonds in the defective graphene lead to a decrease in the structure rigidity with more low-frequency (< 15 THz) phonons. The improved overlap of vibrational density states between graphene and polyethylene at a low frequency results in better interfacial thermal conductance. Moreover, the increase in the interfacial thermal conductance induced by vacancy defects have a significant effect on the overall thermal conductance (from 40.8 MW·m⁻²·K⁻¹ to 45.6 MW·m⁻²·K⁻¹). In addition, when filled with the graphene layer, the local density of polyethylene increases on both sides of the graphene. The concentrated layers provide more aligned molecular arrangement, which result in better thermal conductance in polyethylene. Further, the higher local density of the polymer near the interface provides more atoms for interaction with the graphene, which leads to stronger effective interactions. The relative concentration is insensitive to the density of vacancy defects. The reported results on the thermal transport behavior of graphene-polyethylene composites provide reasonable guidance for using graphene as fillers to tune the thermal conduction of polymeric composites.     

Monolithic polyimine vitrimer/graphene aerogel composites

Graphene-polymer composites have attracted great attention as sensing materials due to their tailorable electrical conductivity, physicochemical properties, and sensitivity to geometric and functional changes. Herein, we report the first example of cylindrical monolithic polyimine vitrimer/graphene composites with excellent mechanical, compressive, rehealable and recyclable, and piezoresistive properties via simple infiltration of polymer monomers into the pores of graphene aerogel followed by thermal curing. The composites exhibit excellent durable compressibility (negligible reduction in the compression properties even after 3000 consecutive compression cycles), rapid recovery to the original size upon stress released, high compressive strength (up to 1.2 MPa), and high conductivity (up to 79 S/m). Excellent piezoresistive properties were observed, displaying consistent and reliable change of the electrical resistance with the compression ratio. Furthermore, rehealing with ～100% recovery of the compressive strength and electric conductivity was achieved under mild rehealing conditions, which is highly desired but has rarely been reported for electronic materials. The facile strategy for fabrication of rehealable monolithic polymer/GAs can open new possibilities for the sustainable development of composites with high electrical conductivity for various applications such as sensing, health monitoring, and movement detection.     

Enhancement of thermal conductivity and tensile strength of liquid silicone rubber by three-dimensional alumina network

ABSTRACT

Rapidly increasing demands for higher integration density and stability of electronic devices embrace higher requirements for thermally conductive silicone rubber, which is promisingly used in ultra-thin components. In this work, alumina whiskers (AWs) and alumina flakes (AFs) are used to modify liquid silicone rubber (LSR) by fabricating binary (AFs/LSR) or ternary (AWs/AFs/LSR) composites. The thermal conductivity and mechanical strength of the binary and ternary composites were investigated. Thermal conductivity of the binary AFs/LSR composite (25AFs/LSR) was 0.1990 W m^?1 K^?1, while the thermal conductivity of the ternary AFs/AWs/LSR composite (20AFs/5AWs/LSR) was 0.2655 W m^?1 K^?1. Furthermore, the tensile strength of the ternary AWs/AFs/LSR composites increased by 180.9% as compared with the binary system, increased to 7.81 MPa from 2.78 MPa due to the introduction of 1 wt% AWs. As a reason, a significant synergistic effect of AWs and AFs in the enhancement of both thermal and mechanical properties of the LSR was proved. Furthermore, the dielectric property measurements demonstrated that the ternary composites exhibited a lower dielectric constant and dielectric loss, indicating that the AWs/AFs/LSR composites were qualified to be applied in the field of electronic devices.     

磺化石墨烯/天然橡胶复合材料的性能研究

以磺化石墨烯为填料,将其填充到天然胶乳中,混合均匀后共沉淀,采用传统橡胶加工方法制备了天然橡胶复合材料。对磺化石墨烯的结构和形貌进行了表征,测定了硫化胶的力学性能、耐磨性能、透气性能和导热性能。研究结果表明:磺化石墨烯表面含有丰富的活性官能团,为少层片状结构,硫化胶的力学性能、耐磨性得到了提高,而透气性和导热性有所下降。当石墨烯添加量为2.0%(wt)时,复合材料的拉伸强度最大为27.06MPa;磨耗体积仅为0.08cm~3;导热系数最小为0.42W/(m·K);透气量最低,为1.98×10~(-4)cm~3/(m~2·d·Pa)。     

Morphology,structure, and photoactivity of two types of graphene oxide-TiO<Subscript>2</Subscript> composites

Two types of graphene oxide-TiO₂ composites were prepared: one by including graphene oxide flakes in the TiO₂ sol, followed by thermal treatment (GI composite) at 300°C, and the second by including graphene oxide flakes in the calcined (at 500°C) TiO₂ xerogel (GII composite). The composites were characterized by SEM, TEM-EDS, TEM-SADP, STEM-HAADF, HRTEM coupled with FT, XRD, and XPS. Photocatalysis results were fitted to different kinetic models (pseudo-first and pseudo-second kinetics, intraparticle Weber-Morris diffusion, film diffusion, and external mass transfer). The results showed that by introducing graphene oxide flakes in the TiO₂ sol, followed by thermal treatment at 300°C (GI composite), an efficient graphene oxide-TiO₂ catalyst with high specific surface area, heterogeneity, and many graphitized areas can be obtained. Complete crystallization of the composite is not the key issue for the best photoactivity achievement. The rate limiting step in the photocatalytic process is the photooxidation of SA molecules on the TiO₂ surface.     

Preparation of antistatic high‐density polyethylene composites based on synergistic effect of graphene nanoplatelets and multi‐walled carbon nanotubes

Graphene nanoplatelets are promising candidates for enhancing the electrical conductivity of composites. However, because of their poor dispersion, graphene nanoplatelets must be added in large amounts to achieve the desired electrical properties, but such large amounts limit the industrial application of graphene nanoplatelets. Multi‐walled carbon nanotubes also possess high electrical conductivity accompanied by poor dispersion. Therefore, a synergistic effect was generated between graphene nanoplatelets and multi‐walled carbon nanotubes and used for the first time to prepare antistatic materials with high‐density polyethylene via 1‐step melt blending. The synergistic effect makes it possible to significantly improve the electrical properties by adding a small amount of untreated graphene nanoplatelets and multi‐walled carbon nanotubes and increases the possibility of using graphene nanoplatelets in industrial applications. When only 1 wt% graphene nanoplatelets and 0.5 wt% multi‐walled carbon nanotubes were added, the surface and volume resistivity values of the composites were much lower than those of the composites that were only added 3 wt% graphene nanoplatelets. Additionally, as a result of the synergistic effect of graphene nanoplatelets and multi‐walled carbon nanotubes, the composites met the requirements for antistatic materials.     

模拟研究石墨烯/生物基尼龙复合材料的界面热阻

生物基尼龙(PA56)源于天然产物,具有优良的环保性能和广阔应用前景,有望替代传统的石油基尼龙材料.为了开发基于PA56的导热材料,利用分子动力学模拟研究方法探索了石墨烯/PA56复合材料界面热阻的影响因素.首先,利用实验测试商用PA56样品的玻璃化转变温度(Tg)和导热系数(Tc),验证了PA56模型的模拟参数.接着,通过设计和比较不同表面改性状态对石墨烯/PA56复合材料的界面热阻的影响规律,最后,为了降低界面改性的难度,设计了一种新型的二嵌段共聚物作为石墨烯/PA56复合体系的界面改性剂,研究了界面改性剂的结构对界面热阻的影响规律.研究结果对于实验研究制备生物基尼龙导热复合材料具有重要的参考价值.