Tripropyltin(iv) complexes with some selected bioligands in 50% v/v dioxane/water mixture

The interaction of the tri-n-propyltin(IV) (TPT) with some selected bioligands having a variety of model functional groups were investigated using potentiometric technique at 25 degrees C and 0.1 M ionic strength in 50% v/v dioxane/water mixture. TPT is hydrolyzed to give [(C3H7)3SnOH], [(C3H7)3Sn(OH)2]-, and [((C3H7)3Sn)2OH]+. Amino acids and DNA constituents form 1:1 and 1:2 complexes. Peptides form 1:1 complexes and the corresponding deprotonated amide species. The protonated complexes are formed with amino acids, peptides and some DNA constituents. The hydrolysis constants and the stepwise formation constants of the complexes formed in solution were calculated using the nonlinear least-square program MINIQUAD-75. The participation of different ligand functional groups in binding to organotin is discussed. The speciation diagrams of the various complex species were evaluated as a function of pH.     

Aquation kinetics of chloropentamminecobalt (III) perchlorate in dicarboxylate media containing 10% (v/v) acetone

The aquation kinetics of [Co(NH₃)₅Cl]²⁺ in dicarboxylate media containing 10% (v/v) acetone is measured in the temperature range of 35–60°C. A new empirical correlation between the rate coefficient, k_obs, and the stoichiometric concentration of the dicarboxylate ligand (C_L) has been established and a reaction mechanism is proposed. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 311–316, 1997.     

On theC v toC p conversion for solid linear macromolecules

TheC _v toC _p conversion for solid linear macromolecules via the Nernst-Lindemann equationC _p -C _v =A ₀,C _p ² T/T_m is discussed on hand of data for 10 crystals and seven glasses. An average value ofA ₀=(5.11±2.41) · 10^–3 mol K J^–1 was calculated if the mole is assumed to refer to heavy atoms only. ThisA ₀ is numerically equal to the original Nernst—Lindemann constant.

---

Zusammenfassung An Hand von sich auf 10 Kristalle und 7 Gläser beziehenden Daten wird die Umrechnung vonC _v -inC _p -Werte für feste lineare Makromoleküle mittels der Nernst-Lindemann-GleichungC _p -C _v =A ₀ C _p ² T/T _m diskutiert. Ein Durchschnittswert vonA ₀=(5.11±2.41) · 10^–3 mol K J^–1 wurde unter der Annahme berechnet, daß sich das Mol nur auf schwere Atome bezieht. DieserA ₀-Wert ist numerisch gleich der ursprünglichen Nerns-Lindemann-Konstanten.

---

10 , - C _v C _p , —C _p –C _v = _{0 p} ² / . , , ₀ (5.11±2.41) · 10^–3 · ^–1. ₀ — .

---

---

Support by the National Science Foundation, Polymers Program (Grant No. DMR 83-17097) is gratefully acknowledged.     

Slice imaging of the quantum state-to-state cross section for photodissociation of state-selected rovibrational bending states of OCS (v2=0,1,2/JlM)+hnu-->CO(J)+S(1D2)

Using hexapole quantum state-selection of OCS (v(2)=0,1,2/JlM) and high-resolution slice imaging of quantum state-selected CO(J), the state-to-state cross section OCS (v(2)=0,1,2/JlM)+hnu-->CO(J)+S((1)D(2)) was measured for bending states up to v(2)=2. The population density of the state-selected OCS (v(2)=0,1,2 /JlM) in the molecular beam was obtained by resonantly enhanced multiphoton ionization of OCS and comparison with room temperature bulk gas. A strong increase of the cross section with increasing bending state is observed for CO(J) in the high J region, J=60-67. Integrating over all J states the authors find sigma(v(2)=0):sigma(v(2)=1):sigma(v(2)=2)=1.0:7.0:15.0. A quantitative comparison is made with the dependence of the transition dipole moment function on the bending angle.     

Conductivity of LiBOB in various ternary solvent blends and the electrochemical performance of LiBOB-PC/EMC/DMC used in Li/MCMB and LiFePO4/Li cells

The solid-state reaction was employed to obtain LiBOB in vacuum dryer at 100°C, with the dryer of P₂O₅. The resulting LiBOB was employed in various ternary solvent blends to get the k, and its change with salt, solvent composition and temperature. 0.7 M LiBOB-PC/EMC/DMC (1: 1: 1, v: v: v) and 0.5 M LiBOB-EC/EMC/DMC (1: 1: 1, v: v: v) were observed to have better k at wide θ range, and the former was chosen to assemble Li/MCMB and LiFePO₄/Li cells. The results indicated that it can stabilize the MCMB anodes, and exhibit good stability in LiFePO₄/Li cell. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 10, pp. 1231–1236. The text was submitted by the authors in English.     

Fourier transform u.v.-visible molecular luminescence spectrometry: Fluorescence excitation spectra

The analytical utility of Fourier transform spectrometry in the u.v.-vis region was investigated. Molecular fluorescence excitation spectra were acquired for four polycyclic aromatic hydrocarbons frozen in Shpol'skii solvents. Analytical figures of merit were determined for coronene, including a limit of detection of 2 ppb and a precision better than 13% RSD. The major sources of noise in FT/u.v. molecular fluorescence spectrometry are discussed, and results are compared to those reported earlier from wavelength dispersive instruments.     

Pocket v.2: further developments on receptor-based pharmacophore modeling

A deriving pharmacophore model from the three-dimensional structure of a target protein provides helpful information for analyzing protein-ligand interactions and further improvement of ligand binding affinity. A standalone program, Pocket v.2, has been developed based on the original Pocket module in the de novo drug design program LigBuilder. Pocket v.2 is able to derive a pharmacophore model directly from a given protein-ligand complex structure without human intervention. Key features in the pharmacophore model are automatically reduced to a reasonable number. Pocket v.2 has been applied to several case studies, including cyclin dependent kinase 2, HIV-1 protease, estrogen receptor, and 17beta-hydroxysteroid dehydrogenase. It well reproduced previously published pharmacophore models in all of these cases. One notable feature of Pocket v.2 is that it can tolerate minor conformational changes on the protein side upon binding of different ligands to give a consistent pharmacophore model. For different proteins accommodating the same ligand, Pocket v.2 gives similar pharmacophore models, which opens the possibility to classify proteins with their binding features.     

The relaxation of OH (v=1) and OD (v=1) by H2O and D2O at temperatures from 251 to 390 K

We report rate coefficients for the relaxation of OH(v=1) and OD(v=1) by H2O and D2O as a function of temperature between 251 and 390 K. All four rate coefficients exhibit a negative dependence on temperature. In Arrhenius form, the rate coefficients for relaxation (in units of 10(-12) cm3 molecule-1 s-1) can be expressed as: for OH(v=1)+H2O between 263 and 390 K: k=(2.4+/-0.9) exp((460+/-115)/T); for OH(v=1)+D2O between 256 and 371 K: k=(0.49+/-0.16) exp((610+/-90)/T); for OD(v=1)+H2O between 251 and 371 K: k=(0.92+/-0.16) exp((485+/-48)/T); for OD(v=1)+D2O between 253 and 366 K: k=(2.57+/-0.09) exp((342+/-10)/T). Rate coefficients at (297+/-1 K) are also reported for the relaxation of OH(v=2) by D2O and the relaxation of OD(v=2) by H2O and D2O. The results are discussed in terms of a mechanism involving the formation of hydrogen-bonded complexes in which intramolecular vibrational energy redistribution can occur at rates competitive with re-dissociation to the initial collision partners in their original vibrational states. New ab initio calculations on the H2O-HO system have been performed which, inter alia, yield vibrational frequencies for all four complexes: H2O-HO, D2O-HO, H2O-DO and D2O-DO. These data are then employed, adapting a formalism due to Troe (J. Troe, J. Chem. Phys., 1977, 66, 4758), in order to estimate the rates of intramolecular energy transfer from the OH (OD) vibration to other modes in the complexes in order to explain the measured relaxation rates-assuming that relaxation proceeds via the hydrogen-bonded complexes.     

Quantification of taraxasterol in rat plasma by LC/MS/MS: application to a pharmacokinetic study

Taraxasterol, a pentacyclic triterpene from Taraxacum officinale, is one of the main active constituents of the herb. This study developed and validated a highly selective and sensitive liquid chromatography/tandem mass spectrometry for the determination of taraxasterol in rat plasma over the range of 9.0–5000 ng/mL. Chromatographic separation was achieved on a C₁₈ (4.6 × 50 mm, 5.0 µm) column with methanol–isopropanol–water–formic acid (80:10:10:0.1, v/v/v/v) as mobile phase with an isocratic elution. The flow rate was 0.7 mL/min. After adding cucurbitacin IIa as an internal standard (IS), liquid–liquid extraction was used for sample preparation using ethyl acetate. The atmospheric pressure chemical ionization source was applied and operated in positive ion mode. Selected reaction monitoring mode was used for the quantification of transition ions m/z 409.4 → 137.1 for taraxasterol and m/z 503.4 → 113.1 for IS. The mean recoveries of taraxasterol in rat plasma ranged from 85.3 to 87.2%. The matrix effects for taraxasterol were between 98.5 and 104.0%. Intra‐ and inter‐day precision were both <11.8%, and the accuracy of the method ranged from ?7.0 to 12.9%. The method was successfully applied to a pharmacokinetic study of taraxasterol after oral administration of 7.75, 15.5 and 31.0 mg/kg in rats. Copyright © 2015 John Wiley & Sons, Ltd.     

Determination of Visnagin inAmmi visnagaHairy Root Cultures Using Solid-Phase Extraction and High-Performance Liquid Chromatography

A high-performance liquid chromatographic method was developed for separation of the furochromone fraction and for determination of visnagin inAmmi visnagahairy root cultures. Lyophilized samples were extracted with chloroform:methanol (1:1, v/v) and purified on solid-phase extraction cartridges. HPLC analyses were performed on a Eurospher 100-C₈Knauer column and the mobile phase was 29:28:526:417 (v/v/v/v) acetonitrile:tetrahydrofuran:30 mM citric acid (pH 3.0):methanol. Quercetin was used as internal standard. Peaks were identified by addition of authentic standards and/or by diode-array detection.     

Rotationally inelastic scattering of OH (2Pi 3/2, v=0, J=3/2, f) by HBr (1Sigma, v=0, J<4)

Relative state-to-state cross sections of OH molecules in the (2)Pi(32), v=0, J=32, M(J)=32, f state have been determined for transitions up to (2)Pi(32), v=0, J=112, f and (2)Pi(12), v=0, J=72, e states by collisions with HBr molecules ((1)Sigma, v=0, J<4) at 750 cm(-1) collision energy. In order to investigate features of the anisotropy of the OH-HBr potential energy surface, the steric asymmetries, which account for the effect of the OH orientation with respect to the collision partner, have been measured. A comparison with other systems previously studied shows strong similarities with the OH-HCl system.     

Converged close coupling calculations for V-V energy transfer: 2HF(v=1)→HF(v=2)+HF(v=0)

We report accurate dynamical calculations for V-V energy transfer in the collision of two HF(v=1) molecules for a realistic potential energy surface.     

Rotational spectrum of the dimethyl ether-acetylene complex: evidence for an effective C2v geometry

The rotational spectra for five isotopomers of the 1:1 weakly bound complex formed between dimethyl ether (DME) and acetylene (HCCH) have been measured by Fourier transform microwave spectroscopy. The experimental rotational constants, planar moments, and dipole moment components are consistent with a floppy complex possessing an effective C2v structure in which the hydrogen atom of acetylene is hydrogen bonded to the oxygen atom of dimethyl ether with an intermolecular H...O separation of 2.08(3) A. Experimental rotational constants for the normal isotopic species are A = 10382.5(17) MHz, B = 1535.7187(18) MHz, and C = 1328.3990(17) MHz and the dipole moment components are mua= mutotal = 1.91(10) D. Ab initio calculations at the MP2/6-311++G(2d,2p) level indicate that the energy barrier for motion of the HCCH subunit between the lone pairs of the DME, via a C2v intermediate structure, is very low (approximately 0.29 kJ mol(-1)). Inclusion of basis set superposition error and zero point energy corrections to the energies of four stationary points located on the potential energy surface shows that the relative stabilities are particularly sensitive to these corrections. The ab initio optimizations give rotational constants for the C2v structure of A = 10066 MHz, B = 1496 MHz, and C = 1324 MHz, and a dipole moment of mua= mu(total) = 2.12 D, in reasonable agreement with the experimentally determined values. The structural parameters and energetics of the DME-HCCH complex will be discussed and compared to similar complexes such as H2O-HCCH.     

Imidovanadium(v) complexes as reaction partners for kinetically stabilized phosphaalkynes: synthesis of 1,2,4-azaphosphavanada(v)-cyclobutenes, 1,3,5-triphosphabenzenes, and 1H-1,2,4-azadiphospholes

Cycloaddition reactions of the kinetically stabilized phosphaalkynes 1 with the imidovanadium(v) trihalides 9 furnish the 1,2,4-azaphosphavanada(v)cyclobutenes 10. The stability of these novel metallacyclic compounds depends solely on the substitutents of the imido unit. Thus, the imidovanadium(v) species 9 with tertiary alkyl groups on the N atom form stable addition products with 1 while in the cases of compounds 9 with a lower degree of substitution at N (primary and secondary alkyl groups) the primarily formed adducts 10 undergo irreversible decomposition to afford the 1H-1,2,4-azadiphospholes 13. Reactions of an excess of the phosphaaalkyne 1 with the vanadium complexes 9 furnish the corresponding triphosphabenzenes 8 in good yields (36-68%). A catalytic reaction course has been demonstrated for the all-tert-butyl system 1a/9a in which the metallacyclic species 10a serves as the catalytically active species. Poisoning of the catalyst leads to a second reaction pathway, which results in formation of the azatetraphosphaquadricyclanes 16. By means of the stepwise use of different phosphaalkynes 1a,b this methodology provides the first access to the differently substituted triphosphabenzenes through cyclotrimerization.     

The polarization dependent differential cross sections of the reactions:H+LiH~+(v=0,j=0)→H_2+Li~+ and H~++ LiH(v=0,j=0)→H_2~++Li

<正>Quasi-classical trajectory(QCT) calculations have been carried out to study the generalized polarization dependent differentialcross sections(PDDCSs) for the reactions H + LiH~+(v = 0,j = 0)→H_2 + Li~+ and H~+ + LiH(v = 0,j = 0)→H_2~+ + Li occurring onthe two lowest-lying electronic states of the LiH_2~+ system,using the ab initio potential energy surfaces(PESs) of Martinazzo et al.[3].Four PDDCSs,i.e.,(2π/σ)(dσ_(00)/dω_t),(2π/σ)(dσ_(20)/dω_t),(2π/σ)(dσ_(22+)/dω_t),(2π/σ)(dσ_(21-)/dω_t) have been discussed in detail.     

Stereoselective determination of allethrin by two-dimensional achiral/chiral liquid chromatography with ultraviolet/circular dichroism detection

A two-dimensional achiral/chiral HPLC method with circular dichroism (CD) detection was optimized for the stereochemical resolution and determination of the elution order of the eight stereoisomers of synthetic allethrin. A monolithic silica HPLC column (Chromolith, Merck, 100 mm x 4.6 mm i.d.) was put orthogonally to an enantioselective OJ Daicel column (250 mm x 4.6 mm i.d.) by means of a switching valve. The resolution of cis and trans diastereoisomers on the silica column was obtained by using a mobile phase consisting of n-hexane:tert-butyl methyl ether (96:4) (v/v) at a flow rate of 1 ml min(-1). The cis and trans peaks were then switched to the enantioselective OJ column separately in two subsequent injections. The resolution of the four trans stereoisomers was accomplished by using n-hexane:tert-butyl methyl ether (90:10) (v/v), while the mobile phase composition for the four cis stereoisomers consisted of n-hexane:isopropanol (99.3:0.7) (v/v). The CD based detection system allowed the determination of the elution order on the basis of the CD signals of the single stereoisomers, together with the injection of pure stereoisomers. Under the final conditions, the validated method was applied to the determination of stereoisomeric composition and absolute configuration of the prevailing stereoisomers of real samples, i.e. commercial batches of different sources of d-allethrin.     

The preparation, characterization, and thermal behaviour of some lithium aluminum oxides: Li3AlO3 and Li5AlO4

The purpose of this research was to study the best conditions for the synthesis of the double oxides Li₅AlO₄ and Li₃AlO₃ in the solid state starting from the simple oxides, and to determine their heats of formation.Li₅AlO₄ was obtained from Li₂O₂ or Li₂O and -Al₂O₃ in a Li/Al molar ratio of 51, and was characterized by X-ray methods. Lithium orthoaluminate, Li₃AlO₃, was obtained from Li₂O₂ and -Al₂O₃ in a molar ratio 31. The postulated formula, Li₃AlO₃, was confirmed by chemical analysis.The temperature ranges in which the compounds are stable were established by the DTA method, and were found to be very limited for Li₃AlO₃ (400–430°) but greater for Li₅AlO₄ (440 — more than 600°).The heats of formation of Li₅AlO₄ and Li₃A10₃, also determined by means of the DTA method, were found to be –552.3 ± 0.8 kcal/mole and –416.8 ± 2 kcal/mole, respectively.

---

Zusammenfassung Es wurden die Bildungsverhältnisse der doppelten Oxide Li₅AlO₄ und Li₃AlO₃ in fester Phase ausgehend von den einfachen Oxyden geprüft und ihre Bildungswärmen bestimmt. Li₅AlO₄ wurde aus Li₂O₂ oder Li₂O und -Al₂O₃ beim Molverhältnis von Li/Al 5 1 erhalten und röntgenographisch identifiziert. Das Orthoaluminat Li₃AlO₃ erhielt man beim Molverhältnis 3 1 von Li₂O₂ und -Al₂O₃. Die Zusammensetzung von Li₃AlO₃ wurde durch chemische Analyse nachgewiesen. Die DTA-Prüfung zeigte, daß Li₃AlO₃ nur im sehr kleinen Temperaturgebiet (400–430°), Li₅AlO₄ hingegen im weiteren Bereich zwischen 440–600° stabil ist. Die Bildungswärmen betrugen für Li₅AlO₄ –552.3±0.8, für Li₃AlO₃ –416.8±2 kcal/Mol.

---

Résumé On a recherché les meilleures conditions pour réaliser la synthèse à l'état solide des oxydes doubles Li₅AlO₃ et Li₃AlO₃ en partant des oxydes individuels et pour déterminer leur chaleur de formation. Li₅AlO₄ a été obtenu en partant de Li₂O₂ (ou Li₂O) et de -Al₂O₃ dans le rapport molaire Li/Al=5/1; il a été caractérisé par étude aux rayons X. L'orthoaluminate de lithium, Li₃AlO₃, a été obtenu en partant de Li₂O₂ et de -Al₂O₃ mélangés dans le rapport 3/1. L'analyse chimique a confirmé la formule présumée Li₃AlO₃. L'ATD a permis de déterminer le domaine de stabilité thermique de ces composés: très restreint pour Li₃AlO₃ (400–430°), plus grand pour Li₅AlO₄ (440-plus de 600°), ainsi que leurs chaleurs de formation: –416.8±2 kcal/mole et –552.3±0.8 kcal/mole, respectivement.

---

— Li₅AlO₄ Li₃AlO₃ . Li₅AlO₄ Li₂O₂ Li₂O -l₂₃ Li/Al 51, . , Li₃AlO₃, Li₂O₂ -l₂₃ 31. . , , , Li₃AlO₃ (400—430 °?) Li₅AlO₄ (440- 600 °?). Li₅AlO₄ Li₃AlO₃ 552.3 ± 0.8 416.8 ± 2 /, .

     

Isolation of chavibetol from essential oil of Pimenta pseudocaryophyllus leaf by high-speed counter-current chromatography

Counter-current chromatography (CCC) was used to isolate chavibetol from the essential oil of leaves of Pimenta pseudocaryophyllus (Gomes) Landrum. Chavibetol was obtained in high purity (98%) and mass recovery (94.4%). Methyleugenol was also isolated. The CCC biphasic solvent system used was composed of hexane:n-butanol:methanol:water (12:4:4:3, v/v/v/v).     

O(1D)+Si(CH3)3Cl反应生成振动激发的OH(ν≤3)

The vibrationally excited OH(v) from the reaction of O(~1D)+Si(CH_3)_3Cl was observed by UV laser photolysis/FTIR emission spectroscopy. The vibrational number was only up to 3 with a ratio of 1:0.8:0.1 for v=1:2:3. Comparing this result with the similar reaction of O(~1D)+Si(CH_3)_4 which OH(v) vibrational number was high up to 4 with a ratio of 1:1:1:0.3 for v=1:2:3:4 under the same experimental conditions, it was found that the substitution of Cl for CH_3 affected the extent of heavy Si atom blocking the energy migration in a molecule. This results identifies the prediction that the characteristic of electrons in central atom plays an important role in intramolecular energy transfer.