Comparison of uranyl extraction mechanisms in an ionic liquid by use of malonamide or malonamide-functionalized ionic liquid

The extraction of uranyl from acidic (HNO(3)) aqueous solutions toward an ionic liquid phase, C(1)-C(4)-imTf(2)N (1-methyl,3-butylimidazolium Tf(2)N), has been investigated as a function of initial acid concentration and ligand concentration for two different extracting moieties: a classical malonamide, N,N'-dimethyl-N,N'-dibutylmalonamide (DMDBMA) and a functionalized IL composed of the Tf(2)N(-) anion and an imidazolium cation on which a malonamide pattern has been grafted (FIL-MA). The extraction mechanism, as demonstrated through the influence of added C(1)-C(4)-imCl or added LiTf(2)N in the aqueous phase, is slightly different between the DMDBMA and FIL-MA extracting agents. Modeling of the extraction data evidences a double extraction mechanism, with cation exchange of UO(2)(2+)versus 2 H(+) for DMDBMA or versus C(1)-C(4) -im(+) and H(+) for FIL-MA at low acidic values, and through anion exchange of [UO(2)(NO(3))(3)](-)versus Tf(2)N(-) for both ligands at high HNO(3) concentrations. The FIL-MA molecule is more efficient than its classical DMDBMA parent.     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Electrochemical behavior of uranyl in ionic liquid 1-butyl-3-methylimidazolium chloride mixture with water

Electrochemical behaviors of U(VI) in 1-butyl-3-methylimidazolium chloride (C₄MimCl) with various water contents investigated by chronopotentiometry and cyclic voltammetry. The electrochemical reduction of U(VI) was identified to follow two processes: a lower valence intermediate U(V) was initially formed at the potential of ca. ?0.2 V(vs. Ag wire). Then, further deposition of UO₂ was followed at around ?0.8 V. Little amount of water (1–4 wt%) in C₄MimCl, however, has an effect on the U(VI) reduction by changing the current density of the redox reaction and the diffusion coefficient of U(VI) in C₄MimCl. The deposited product by potentiostatic electrolysis on the surface of stainless steel electrode was characterized by the scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and X-ray diffraction (XRD) methods. Although the electrodeposited black film was amorphous, the electrochemical reduced product of U(VI) can be still confirmed to be UO₂ by XRD after the crystallization of the amorphous deposits at 1,073 K in nitrogen atmosphere.     

Temperature-induced aggregation ionic liquid dispersive liquid-liquid microextraction method for separation trace amount of cobalt ion

A simple and rapid temperature induced aggregation micro extraction method based on ionic liquid for extraction and preconcentration of cobalt ions from water samples was proposed. In this investigation small amounts of 1-hexyl-3-methylimidazolium hexafluorophosphate [Hmim][PF₆] and 1-hexyl-3-methylimidazolium bis-(trifluoromethylsulfonyl)imide [Hmim][Tf₂N] (as extractant solvents) were added in a sample solution containing Triton X-114 (as an anti-sticking agent). After centrifuging the cooled solution, analysis was carried out by flame atomic absorption spectrophotometry. Some effective parameters have been optimized. Under the optimum conditions, detection limit of the method was 0.44 ng/mL and the relative standard deviation (RSD) for 100.0 ng/mL cobalt was ±2.3% (n = 7).The calibration curve was linear in the range of 3.0–200.0 ng/mL cobalt and enrichment factor was obtained as 26.5. The applicability of the technique was evaluated by the determination of trace amounts of cobalt in several water samples and synthetic alloys.     

Room temperature ionic liquid as a novel medium for liquid/liquid extraction of metal ions

Room temperature ionic liquids (RTILs) have been used as novel solvents to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. The hydrophobic character and water immiscibility of certain ionic liquids allow their use in solvent extraction of hydrophobic compounds. In this work, a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent to study liquid/liquid extraction of heavy metal ions. Dithizone was employed as a metal chelator to form neutral metal-dithizone complexes with heavy metal ions to extract metal ions from aqueous solution into [C₄mim][PF₆]. This extraction is possible due to the high distribution ratios of the metal complexes between [C₄mim][PF₆] and aqueous phase. Since the distribution ratios of metal dithiozonates between [C₄mim][PF₆] and aqueous phase are strongly pH dependent, the extraction efficiencies of metal complexes can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation, and preconcentraction of heavy metal ions with the biphasic system of [C₄mim][PF₆] and aqueous phase can be achieved by controlling the pH value of the extraction system. Preliminary results indicate that the use of [C₄mim][PF₆] as an alternate solvent to replace traditional organic solvents in liquid/liquid extraction of heavy metal ions is very promising.     

Task-specific ionic liquid trioctylmethylammonium salicylate as extraction solvent for transition metal ions

A quaternary ammonium-based room temperature ionic liquid trioctylmethylammonium salicylate (TOMAS) has been studied as an extractant of transition metal ions (Fe³⁺, Cu²⁺, Ni²⁺, Mn²⁺) in aqueous solutions. The effect of pH value on the recovery of metal ions has been investigated. The mechanism of extraction into the ionic liquid has been proposed. The possibility of stripping voltammetric determination of transition metals in aqueous solutions using TOMAS-modified electrodes has been demonstrated.     

New aminophosphoryl extractants for liquid extraction of Pt(IV) ions

Russian Journal of General Chemistry -     

Complexation between uranyl(VI) and CMPO in a hydroxyl-functionalized ionic liquid: An extraction,spectrophotography, and calorimetry study

The extraction complexes of uranyl(VI) in HNO₃ to a hydroxyl-functionalized ionic liquid (IL) phase, HOEtmimNTf₂ bearing CMPO, were investigated. Three possibly successive extraction complexes, UO₂L²⁺ (L = CMPO), UO₂L₂²⁺ and UO₂L₃²⁺, were detected based on variable U/L ratios. Uranyl(VI) prefers to be extracted as complex UO₂L₃²⁺, combining with the ions from HOEtmimNTf₂ to construct a solid material through self-assembly. The thermodynamics of complexes, UO₂L_j²⁺ (j = 1-3), were studied by spectrophotometry and microcalorimetry. All the formation reactions are principally driven by entropy, although a small part of the driving force of complexes UO₂L₂²⁺ and UO₂L₃²⁺ comes from enthalpy. Based on the thermodynamic properties for complex UO₂L₃²⁺, we provide a possible coordination mode in HOEtmimNTf₂: the first CMPO molecule coordinates with UO₂²⁺ in a bidentate fashion while the others do in a monodentate fashion. The results offer a thermodynamic insight into the formation behaviors of the uranyl(VI)/CMPO complexes involving the special IL HOEtmimNTf₂, which is of significance to advance the novel IL extraction strategy.     

Determination of spices in food samples by ionic liquid aqueous solution extraction and ion chromatography

In the present work, a novel method to extract three kinds of spices, namely vanillin, ethyl vanillin and ethyl maltol from food products such as biscuit, chocolate and milk powder was developed. 1-Octyl-3-methylimidazolium chloride([Omim]Cl) aqueous solution was selected as the extracting medium. A 0.5 g powder of food product was extracted by 5.0 mL of [Omim]Cl aqueous solution(0.3 mol/L, pH 6.0) under ultrasonication at 50 8C, and then the extract was centrifuged for 10 min at 4000 rpm. The extract was filtered through a syringe filter and injected into ion chromatography system for analysis. The separation of the three spices was carried out on an anion exchange column. The detection wavelength was set at 280 nm. Compared with traditional extraction solvents, [Omim]Cl aqueous solution displayed particular advantages. The applicability of the proposed method to real sample was confirmed. Under the optimal conditions, good reproducibility of extraction performance was obtained, with the relative standard deviation(RSD) values ranging from 1.9% to 6.3%. The recoveries of spiked samples were between 79.8% and 95.8%. The detection limits(LOD, S/N = 3) of vanillin, ethyl vanillin and ethyl maltol were in the range of 20–45 mg/kg. The use of ionic liquid aqueous solution as extraction solvent was operationally easy and environmental-friendly.     

Use of 8-sulfonamidoquinoline derivatives as chelate extraction reagents in ionic liquid extraction system

Possible use of 8-sulfonamidoquinoline derivatives as chelate extraction reagents for solvent extraction of several divalent metal cations using an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) as extraction phase was investigated as fundamental approach to develop novel extraction reagents for ionic liquid extraction system. The studied reagents were able to be used as extractants for the metal cations in the [bmim][PF(6)] extraction system. Furthermore, their extractability in the [bmim][PF(6)] system was superior to that in chloroform system. Most of the extracted species were (hydrated) neutral complexes, whereas, in use of the derivative having trifluoromethyl group, Cd(2+) was extracted as anionic complex accompanied with anion-exchange process.     

Determination of morpholinium ionic liquid cations in environmental water samples: development of solid-phase extraction method and ion chromatography

An ion chromatography and solid-phase extraction method has been applied for the separation and detection of morpholinium cations in environmental water samples. The water samples were purified and enriched by a UF-SCX sulfonic acid extraction column and eluted with 0.5 mol L⁻¹ phosphoric acid/sodium dihydrogen phosphate buffer solution/55% methanol. The target compounds were separated on a carboxylic acid cation exchange column with 5.0 mmol L⁻¹ methane sulfonic acid/2% acetonitrile as the mobile phase and direct conductivity detection. The method has been successfully applied to extract morpholinium cations from spiked water samples of Songhua River, Hulan River, East Lake, and Mopanshan Reservoir in China with the recoveries ranging from 75.0% to 98.3%. The relative standard deviations of intraday precision and interday precision are 2.1% and 5.9% or less, respectively. Using this method it is possible to preconcentrate water samples to 0.01–0.04 mg L⁻¹. The results show that the method is applicable to detection of morpholinium ionic liquid cations in environmental water samples and provides a new approach for monitoring ionic liquids in environmental water.

The analysis procedure of morpholinium ionic liquids in environmental water samples.

     

Spectroelectrochemical identification of a pentavalent uranyl tetrachloro complex in room-temperature ionic liquid

Reduction of U(VI)O(2)Cl(4)(2-) in a mixture of 1-ethyl-3-methylimidazolium tetrafluoroborate and its chloride at E°' = -0.996 V vs Fc/Fc(+) and 298 K affords U(V)O(2)Cl(4)(3-), which is kinetically stable and exhibits typical character of U(V) in the UV-vis-NIR absorption spectrum.     

Thermophysical properties of neat and radiolytically degraded acidic extractants present in room temperature ionic liquid

In the present work, radon concentrations were measured in surface and underground water samples in Faridabad District of Southern Haryana, India using an active radon monitor based on alpha scintillation technique and results have been inter-compared. The average radon concentration in the underground water samples was observed to be 4 times higher than in the surface water samples. The estimated annual effective dose varied from 5.7 to 58.5 μSvy^?1 with an average of 24.2 μSvy^?1 for underground water samples and 1.1 to 12.5 μSvy^?1 with an average of 6.7 μSvy^?1 for surface water samples. The estimated annual effective dose for both type of samples was found to be less than 0.1 mSvy^?1, which is the safe limit as suggested by World Health Organisation and EU Council.

     

Aggregation behavior of long-chain ionic liquids in an ionic liquid

The aggregation behavior of long-chain ionic liquids 1-alkyl-3-methylimidazolium bromide (C(n)mimBr) in another ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)), was studied for the first time. Surface tension measurements revealed that aggregates are formed by C(n)mimBr, and freeze fracture transmission electron microscopy (FF-TEM) observations suggested the aggregates are spheres with a size much larger than traditional micelles. The sizes of the aggregates were further confirmed by dynamic light scattering (DLS) measurements.     

离子液体双水相萃取山楂黄酮和多糖的相行为研究

用分光度法研究了[Bmim]BF4/(NH4)2SO4双水相体系萃取山楂黄酮和多糖的相行为,考察了同时提取这两种组分时[Bmim]BF4的浓度、(NH4)2SO4的浓度、山楂的用量、超声萃取时间等因素对双水相的上下相体积以及分配系数的影响。结果表明:(1)离子液体浓度的增加,双水相的上、下相体积分别明显增大和减小。但黄酮和多糖在双水相中的分配系数仅有波动,均小于5%;(2)硫酸铵浓度的增加,双水相的上下相体积分别明显减小和增大。同时黄酮和多糖的分配系数均有较明显先降低后升高的趋势;(3)山楂质量的增减,不影响双水相的形成,但存在一个实验条件下的溶出饱和值,该值为0.15g,此时黄酮和多糖的分配系数最大;(4)超声萃取时间的延长或缩短,同样不影响双水相的形成,但存在对山楂有效成分达到饱和溶出的阈值,对于黄酮为25min,多糖为20min。     

An 8-sulfonamidoquinoline derivative with imidazolium unit as an extraction reagent for use in ionic liquid chelate extraction systems

To evaluate the superiority of using a task-specific onium salt (TSOS), a novel TSOS reagent 1-methyl-3-[2-(8-quinolinylaminosulfonyl)ethyl]imidazolium chloride (HmimesqCl) was synthesized, and its performance in extraction of different divalent metal cations was investigated. This TSOS reagent has both a cationic imidazolium unit and an anionic (proton-dissociable) complexation unit for the extraction of metal cations into an ionic liquid. In the use of HmimesqCl, relatively high extraction of metals resulted in comparison with the use of its non-imidazolium analogs, without changing the extraction selectivity.     

Extraction behavior of copper(II) ion with a hydrophobic amino-functionalized ionic liquid

We have prepared the hydrophobic amino-functionalized ionic liquid (IL) 1-(2-aminoethyl)-3-butylimidazolium hexafluorophosphate and investigated its extraction behavior for copper(II) ion as a model cation. The IL, due to the presence of an amino group, is capable of complexing Cu(II) in a ratio of 6:1. The parameters affecting the extraction efficiency were optimized. The IL-based liquid–liquid microextraction was successfully applied to the analysis of Cu(II) in an environmental water standard reference material. The results are promising in terms of liquid–liquid microextraction, separation, and preconcentration of Cu(II).