Graphene quantum dots assisted photovoltage and efficiency enhancement in CdSe quantum dot sensitized solar cells

CdSe quantum dot sensitized solar cells(QDSCs) modified with graphene quantum dots(GQDs) have been successfully achieved in this work for the first time. Satisfactorily, the optimized photovoltage(Voc) of the modified QDSCs was approximately 0.04 V higher than that of plain CdSe QDSCs, consequently improving the photovoltaic performance of the resulting QDSCs. Served as a novel coating on the CdSe QD sensitized photoanode, GQDs played a vital role in improving Vocdue to the suppressed charge recombination which has been confirmed by electron impedance spectroscopy as well as transient photovoltage decay measurements. Moreover, different adsorption sequences, concentration and deposition time of GQDs have also been systematically investigated to boost the power conversion efficiency(PCE) of CdSe QDSCs. After the coating of CdSe with GQDs, the resulting champion CdSe QDSCs exhibited an improved PCE of 6.59% under AM 1.5G full one sun illumination.     

水热法可控合成二氧化钛纳米晶及其在染料敏化太阳能电池中的应用

本文报道了水热法可控合成二氧化钛纳米晶及其在染料敏化太阳能电池中的应用.选择合适的有机碱胶化剂,能很好地控制二氧化钛纳米晶的生长,形成不同形貌和粒径的锐钛矿型二氧化钛纳米晶颗粒.染料敏化太阳能电池光电性能测试结果表明,以四乙基氢氧化铵为胶化剂合成的边长为8～13nm的正方形二氧化钛纳米晶构成的光阳极光电性能优于以四丁基氢氧化铵为胶化剂合成的边长为7～10nm的正方形二氧化钛纳米晶以及长18～35nm,宽10～18nm的长方形二氧化钛纳米晶构成的光阳极.用较高浓度的四甲基氢氧化铵胶化剂能合成球形或椭球形亚微米级二氧化钛颗粒,以其为散射中心在光阳极中构建散射层,染料敏化太阳能电池的光电转换效率能由6.77%提高到8.18%.     

Synthesis of ZnO nanorods and their application in quantum dot sensitized solar cells

ZnO nanorod thin films of different thicknesses and CdS quantum dots have been prepared by chemical method. X-ray diffraction pattern reveals that the CdS quantum dot and ZnO nanorods are of hexagonal structure. Field emission scanning electron microscope images show that the diameter of hexagonal shaped ZnO nanorods ranges from 110 to 200 nm and the length of the nanorod vary from 1.3 to 4.7 μm. CdS quantum dots with average size of 4 nm have been deposited onto ZnO nanorod surface using successive ionic layer adsorption and reaction method and the assembly of CdS quantum dot with ZnO nanorod has been used as photo-electrode in quantum dot sensitized solar cells. The efficiency of the fabricated CdS quantum dot-sensitized ZnO nanorod-based solar cell is 1.10 % and is the best efficiency reported so far for this type of solar cells.     

Directly assembled CdSe quantum dots on TiO2 in aqueous solution by adjusting pH value for quantum dot sensitized solar cells

We report an improved quantum dot sensitized solar cell (QDSSC) by loading mercaptopropionic acid (MPA)-capped CdSe QDs on TiO₂ film in aqueous solution. Under suitable pH value, a power conversion efficiency of 1.19% and an incident photon to current conversion efficiency of 26% for the QDSSC were obtained at AM1.5G irradiation. The improved performance of QDSSC is attributed to the large loading and good coverage of QDs on TiO₂ film with optimal pH value.     

Biomimetic total synthesis and structure confirmation of myrtucommulone K

A confirmed structure of meroterpenoid myrtucommulone K, which is vastly different from the originally reported one, is conducted. The first biomimetic total synthesis towards the assignment of its absolute configuration has been efficiently accessed in 5 steps, and key to the success was a heteroatom Diels-Alder cycloaddition. The structure of myrtucommulone K was re-elucidated and confirmed by extensive spectroscopic interpretation of 1D and 2D NMR.     

CdS and CdSe quantum dots subsectionally sensitized solar cells using a novel double-layer ZnO nanorod arrays

We report a novel approach for synthesizing CdS and CdSe quantum dots subsectionally sensitized double-layer ZnO nanorods for solar cells, which are comprised of CdS QDs-sensitized bottom-layer ZnO NRs and CdSe QDs-sensitized top-layer ZnO NRs. X-ray diffraction study and scanning electron microscopy analysis indicate that the solar cells of subsectionally sensitized double-layer ZnO NRs, which are the hexagonal wurtzite crystal structure, have been successfully achieved. The novel structure enlarged the range of absorbed light and enhanced the absorption intensity of light. The I-V characteristics show that the double-layer structure improved both the current density (J_sc) and fill factor (FF) by 50%, respectively, and power conversion efficiency (η) was increased to twice in comparison with the CdS QDs-sensitized structure.     

Raman and photoluminescence investigation of CdS/CdSe quantum dots on TiO2 nanoparticles with multi-walled carbon nanotubes and their application in solar cells

Raman spectroscopy and photoluminescence (PL) were used to investigate the improved short-circuit current density (J_SC) of CdS/CdSe quantum dot (QD)-sensitized solar cells with multi-walled carbon nanotubes (MWCNTs). Raman and PL experiments were carried out in order to explore the hot-electron and cold-electron injections, respectively. The experimental results showed that the concentration of MWCNTs influences the hot-electron and cold-electron injections from CdS/CdSe QDs to TiO₂ nanoparticles. Therefore, the improved J_SC in CdS/CdSe QD-sensitized solar cells can be explained as due to the better electron injections.     

CdSe量子点敏化纳米二氧化钛太阳电池的电化学交流阻抗谱

量子点敏化纳米TiO2太阳电池(QDSSCs)具有诱人的发展前景,但是与传统的染料敏化太阳电池(DSSCs)相比,其目前的光电转换效率还非常低(仅为3%左右).为了寻找QDSSCs光电转换效率低的原因,本文主要采用外加偏压下的交流阻抗谱技术对通常以S2-/S-x离子对为电解质的CdSe胶体量子点敏化纳米TiO2电极的准...     

Electrochemical impedance spectra of CdSe quantume dots sensitized nanocrystalline TiO_2 solar cells

Quantum dots sensitized nanocrystalline TiO2 solar cells (QDSSCs) are promising third-generation photovoltaic devices.In comparison with conventional dye-sensitized solar cells (DSSCs),the efficiency of QDSSCs is still very low (about 3%).In this paper,the electrochemical impedance spectroscopy technology has been adopted to investigate the quasi-Fermi level and the carrier dynamics of the colloidal CdSe QDs sensitized TiO2 eletrode with S2-/Sxredox electrolytes and the series resistance of the QDSSCs.In co...     

量子点的制备及应用研究进展

综述了量子点的制备方法以及在分析检测、生物、药学、光电器材、指纹显现等领域的应用.指出量子点是一种新型的荧光纳米材料,因其具有独特的光电性质而引起了广泛的关注;并就它的发展方向及应用前景进行了展望.     

Metal oxide nanoparticles: synthesis, characterization and application

The synthesis of metal oxide nanoparticles is described in terms of precursor formation, nucleation, growth, and aging processes. The main parameters governing these processes are the solution properties, including the solvent viscosity, dielectric constant and the presence of adsorbing anions, the solubility of the metal oxide, and the metal oxide surface energy.     

Size-controlled chalcopyrite CuInS2 nanocrystals: One-pot synthesis and optical characterization

Chalcopyrite ternary CuInS2 semiconductor nanocrystals have been synthesized via a facile one-pot chemical approach by using oleylamine and oleic acid as solvents.The as-prepared CuInS2 nanocrystals have been characterized by instrumental analyses such as X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM)/high-resolution TEM(HRTEM),energy-dispersive X-ray spectroscopy(EDS),UV-vis absorption spectroscopy(UV-vis) and photoluminescence(PL) spectroscopy.The particle sizes of the CuInS2 nanocrystals could be tuned from 2 to 10 nm by simply varying reaction conditions.Oleylamine,which acted as both a reductant and an effective capping agent,plays an important role in the size-controlled synthesis of CuInS2 nanocrystals.Based on a series of comparative experiments under different reaction conditions,the probable formation mechanism of CuInS2 nanocrystals has been proposed.Furthermore,the UV-vis absorption and PL emission spectra of the chalcopyrite CuInS2 nanocrystals have been found to be adjustable in the range of 527-815 nm and 625-800 nm,respectively,indicating their potential application in photovoltaic devices.     

Quantum dots sensitized graphene: In situ growth and application in photoelectrochemical cells

A novel photoelectrochemical cells (PEC) based on quantum dots (QDs) sensitized graphene for light harvesting and energy conversion was described in this work. QDs sensitized graphene was prepared by in situ growth of QDs on noncovalently functionalized graphene. QDs sensitized graphene photoelectrodes showed enhanced photocurrent generation capability and incident photon-to-electron conversion efficiency (IPCE) at visible light, and could also be an efficient platform for other optoelectronic applications.     

Polyol-mediated synthesis of Cu2ZnSn(S,Se)4 kesterite nanoparticles and their use in thin-film solar cells

Cu₂ZnSnS₄ kesterite nanoparticles (CZTS) with a particle diameter of 10–20 nm are prepared by a polyol-mediated synthesis with diethylene glycol as the liquid phase. The polyol – a high-boiling multidentate alcohol − allows controlling the particle size and agglomeration as well as preparing readily crystalline nanoparticles. The as-prepared kesterite nanoparticles exhibit an overall composition of Cu_1.56Zn_1.29Sn_1.16S_4.59 and a band gap of 1.37 eV. As a first test, thin-film solar cells are manufactured after layer deposition of the as-prepared CZTS nanoparticles and conversion to Cu₂ZnSn(S,Se)₄ (CZTSSe) via gas-phase selenization. The volume increase of about 15% due to the CZTS-to-CZTSSe conversion supports the formation of a dense layer, reduces the interparticulate surfaces and leads to a reduction of the band gap to 1.14 eV. The chemical composition of the as-prepared CZTS nanoparticles and of the deposited CZTSSe thin film prior and after selenization are studied in detail by energy-dispersive X-ray spectroscopy, Raman spectroscopy and X-ray fluorescence analysis. All these methods confirm the intended copper-poor and zinc-/tin-rich CZTS/CZTSSe composition. The resulting thin-film solar cells show an open-circuit voltage of 247.3 mV, a short-circuit current density of 21.3 mA/cm², a fill factor of 41.1% and a power-conversion efficiency of 2.2%.     

The preparation of glutathione-capped CdTe quantum dots and their use in imaging of cells

In this paper, different sizes of glutathione-capped CdTe (GSH/CdTe) quantum dots (QDs) have been prepared directly in aqueous solution. The QDs have tunable fluorescence in the range of 510-670 nm, and they also have high photoluminescence quantum yield (PLQY) without any postpreparative treatment. Furthermore, the QDs have strong resistance to photobleaching, and they also have to be considered as cytocompatible. In addition, for the first time, folic acid was covalently conjugated to the GSH/CdTe QDs for imaging of cancer cells, demonstrating their potentially broad application as biolabels.     

Albumin coated CuInS2 quantum dots as a near-infrared fluorescent probe for NADH, and their application to an assay for pyruvate

Water-soluble CuInS₂ quantum dots (QDs) stabilized with 3-mercaptopropionic acid were synthesized in aqueous solution and then coated with bovine serum albumin. The resulting particles display fluorescence with a peak at 680 nm that is effectively quenched by 1, 4-dihydro-nicotinamide adenine dinucleotide (NADH), but not by 1, 4-nicotinamide adenine dinucleotide (NAD⁺). The enzyme lactate dehydrogenase catalyzes the reduction of pyruvate and dehydrogenation of lactic acid using NAD⁺ or NADH as a cosubstrate. The new QDs were applied to monitor the course of lactate dehydrogenase-catalyzed reaction of pyruvate by detecting NADH via its quenching effect. This resulted in a convenient and selective detection scheme for pyruvate. The detection limit is as low as 25 nM.

SnO2 quantum dots and quantum wires: controllable synthesis, self-assembled 2D architectures, and gas-sensing properties

SnO2 quantum dots (QDs) and ultrathin nanowires (NWs) with diameters of approximately 0.5-2.5 and approximately 1.5-4.5 nm, respectively, were controllably synthesized in a simple solution system. They are supposed to be ideal models for studying the continuous evolution of the quantum-confinement effect in SnO2 1D --> 0D systems. The observed transition from strong to weak quantum confinement in SnO2 QDs and ultrathin NWs is interpreted through the use of the Brus effective-mass approximation and the Nosaka finite-depth well model. Photoluminescence properties that were coinfluenced by size effects, defects (oxygen vacancies), and surface capping are discussed in detail. With the SnO2 QDs as building blocks, various 2D porous structures with ordered hexagonal, distorted hexagonal, and square patterns were prepared on silicon-wafer surfaces and exhibited optical features of 2D photonic crystals and enhanced gas sensitivity.     

Biomimetic synthesis of gold nanoparticles and their aggregates using a polypeptide sequence

The polypeptide sequence MS14 (MHGKTQATSGTIQS) was used to explore a new method for biomimetic preparation of gold nanoparticles and their aggregates. Self‐congregation of gold nanoparticles into aggregates in MS14 aqueous solution and self‐assembly of gold crystallites onto the designed complex of MS14‐PET film [protonated poly(ethylene terephthalate)] proved the specific gold‐binding characteristic of the single‐copy peptide MS14 in vitro. In aqueous solution MS14 could recover Au(III) to Au(0), tested by means of TEM, EDX and XPS. Further research suggested that the pH of the solution and the concentration of Au(III) influenced the morphology and size of the gold nanoparticles formed. In addition, extra reducing agent, sodium citrate, was introduced into the HAuCl₄–MS14 system and uniformly dispersed nanoparticles under neutral condition were obtained. Finally, we discuss the possible mechanism of this biomimetic synthesis. Copyright © 2007 John Wiley & Sons, Ltd.     

Improved efficiency of TiO2 nanotubes in dye sensitized solar cells by decoration with TiO2 nanoparticles

In the present work we investigate the effect of TiCl₄ treatments on the photoconversion efficiency of TiO₂ arrays used in dye sensitized solar cell. The results clearly show that by an appropriate treatment the decoration of the TiO₂ nanotube arrays with TiO₂ nanocrystallites of a typical size of 3 nm can be achieved. These particles can be converted to mixture of anatase and rutile phase by annealing in air. This decoration of the TiO₂ nanotubes leads to a significantly higher specific dye loading and, for certain annealing treatments, to a doubling of the solar cell efficiency (in our case from 1.9% to 3.8% of AM 1.5 conditions) can be achieved.     

枝状文石型碳酸钙的仿生合成及在PVC中的应用

利用生物矿化原理,以聚丙烯酸(PAA)为有机基质,采用碳化法合成了具有枝状形貌的文石型碳酸钙粒子.通过场发射扫描电镜(FESEM)、X射线衍射仪(XRD)和傅里叶变换红外光谱仪(FTIR)等检测手段研究了产物的结构和形貌,并初步探讨了粒子的生长机理.结果表明,在文石型碳酸钙粒子的合成中,有机基质和反应温度是非常重要的参数.同时将该产品填充于聚氯乙烯(PVC)中,测定了PVC塑料的力学性能和加工性能.