TG/DSC/FTIR/QMS studies on the oxidative decomposition of terpene acrylate homopolymers

The oxidative thermal stability along with the identification of the volatile decomposition products under heating of terpene acrylate homopolymers by using TG/DSC/FTIR/QMS-coupled method was presented. It was found that the decomposition of poly(geranyl acrylate) and poly(neryl acrylate) had quite different course as compared to the decomposition process of poly(citronellyl acrylate) under oxidative conditions. FTIR and QMS analyses confirmed mainly the formation of terpene hydrocarbons, propane, propene, acetic acid, CO, CO₂ and H₂O as the volatile decomposition products under heating of the hompolymers. The results obtained indicated the complex decomposition process of terpene acrylate homopolymers including the random ester bond scissors, the random main carbon chain scissors, decarboxylation, dehydration and oxidation processes of formed gaseous decomposition products and a residue which led to the full decomposition of homopolymers at ca. 600 °C under oxidative conditions.     

鬼臼毒素及其衍生物热分解反应的动力学研究

The thermal behavior and thermal decomposition kinetic parameters of podophyllotoxin （1） and 4 derivatives, picropodophyllin （2）, deoxypodophyllotoxin （3）, fl-apopicropodophyllin （4）, podophyllotoxone （5） in a temperature-programmed mode have been investigated by means of DSC and TG-DTG. The kinetic model functions in differential and integral forms of the thermal decomposition reactions mentioned above for first stage were established. The kinetic parameters of the apparent activation energy Ea and per-exponential factor A were obtained from analy- sis of the TG-DTG curves by integral and differential methods. The most probable kinetic model function of the decomposition reaction in differential form was （1- a）^2 for compounds 1-3,2/3·a^-1/2 for compound 4 and 1/2（1-a）·[-In（1-a）]^-1 for compound 5. The values of Ea indicated that the reactivity of compounds 1-5was increased in the order： 5〈4〈2〈1〈3. The values of the entropy of activation △S^≠, enthalpy of activation △H^≠ and free energy of activation △G^≠ of the reactions were estimated. The values of △G^≠ indicated that the thermal stability of compounds 1-3 with the samef（a） was increased in the order： 2〈3〈1.     

Synthesis and thermal decomposition kinetics of Er(III) complex with unsymmetrical Schiff-base ligand

A new unsymmetrical, solid, Schiff base (H₂LLi) was synthesized using L-lysine, o-vanillin and salicylaldehyde. An Er(III) complex of this ligand [Er(H₂L)(NO₃)](NO₃)?·?2H₂O was prepared and characterized by elemental analysis, IR, UV and molar conductance. The thermal decomposition kinetics of the complex for the second stage was studied under non-isothermal conditions by TG and DTG methods. The kinetic equation may be expressed as, dα/dt?=?A?·?e^?E/RT ?·?1/2(1???α)[?ln(1???α)]^?1. The kinetic parameters (E,?A), activation entropy S ^≠ and activation free-energy G ^≠ were also determined.     

Reactivity ratios and microstructure determination of vinyl acetate–alkyl acrylate copolymers by NMR spectroscopy

(Vinyl acetate)/(ethyl acrylate) (V/E) and (vinyl acetate)/(butyl acrylate) (V/B) copolymers were prepared by free radical solution polymerization. ¹H-NMR spectra of copolymers were used for calculation of copolymer composition. The copolymer composition data were used for determining reactivity ratios for the copolymerization of vinyl acetate with ethyl acrylate and butyl acrylate by Kelen-Tudos (KT) and nonlinear Error in Variables methods (EVM). The reactivity ratios obtained are r_v = 0.03 ± 0.03, r_E = 4.68 ± 1.70 (KT method); r_v = 0.03 ± 0.01, r_E = 4.60 ± 0.65 (EV method) for (V/E) copolymers and r_v ? 0.03 ± 0.01, r_B ? 6.67 ± 2.17 (KT method); r_v = 0.03 ± 0.01, r_B = 7.43 ± 0.71 (EV method) for (V/B) copolymers. Microstructure was obtained in terms of the distribution of V- and E-centered triads and V- and B-centered triads for (V/E) and (V/B) copolymers respectively. Homonuclear ¹H 2D-COSY NMR spectra were also recorded to ascertain the existence of coupling between protons in (V/E) as well as (V/B) copolymers. © 1995 John Wiley & Sons, Inc.     

Thermal Behavior and Non-isothermal Decomposition Reaction Kinetics of NEPE Propellant with Ammonium Dinitramide

Thermal decomposition behavior and non‐isothermal decomposition reaction kinetics of nitrate ester plasticized polyether NEPE propellant containing ammonium dinitramide (ADN), which is one of the most important high energetic materials, were investigated by DSC, TG and DTG at 0.1 MPa. The results show that there are four exothermic peaks on DTG curves and four mass loss stages on TG curves at a heating rate of 2.5 K·min^?1 under 0.1 MPa, and nitric ester evaporates and decomposes in the first stage, ADN decomposes in the second stage, nitrocellulose and cyclotrimethylenetrinitramine (RDX) decompose in the third stage, and ammonium perchlorate decomposes in the fourth stage. It was also found that the thermal decomposition processes of the NEPE propellant with ADN mainly have two mass loss stages with an increase in the heating rate, that is the result of the decomposition heats of the first two processes overlap each other and the mass content of ammonium perchlorate is very little which is not displayed in the fourth stage at the heating rate of 5, 10, and 20 K·min^?1 probably. It was to be found that the exothermal peak temperatures increased with an increase in the heating rate. The reaction mechanism was random nucleation and then growth, and the process can be classified as chemical reaction. The kinetic equations of the main exothermal decomposition reaction can be expressed as: dα/dt=10^12.77(3/2)(1?α)[?ln(1?α)]^1/3 e^{?1.723×104/T}. The critical temperatures of the thermal explosion (T_be and T_bp) obtained from the onset temperature (T_e) and the peak temperature (T_p) on the condition of β→0 are 461.41 and 458.02 K, respectively. Activation entropy (ΔS^≠), activation enthalpy (ΔH^≠), and Gibbs free energy (ΔG^≠) of the decomposition reaction are ?7.02 J·mol^?1·K^?1, 126.19 kJ·mol^?1, and 129.31 kJ·mol^?1, respectively.     

Surface segregation measurements of In and S impurities from a dilute Cu(In,S) ternary alloy

The surface segregation of In and S from a dilute Cu(In,S) ternary alloy were measured using Auger electron spectroscopy coupled with a linear programmed heater. The alloy was linearly heated and cooled at constant rates. Segregation data of a linear heat run showed surface segregation of In that reached a maximum surface coverage of 25% followed by S, which reached a coverage of 30%. It was found that after In had reached a maximum surface coverage, it started to desegregate as soon as the S enriched the surface until In was completely replaced by S. The segregation parameters, namely, the pre‐exponential factor (D₀), activation energy (Q), segregation energy (ΔG?) and interaction energy (Ω) were extracted from the measured segregation data for both In and S segregation in Cu by simulating the measured segregation data with a theoretical segregation model (modified Darken model). The segregation parameters obtained for In segregation in Cu are D₀ = 1.8 ± 0.5 × 10^?5 m² s^?1, Q = 184.3 ± 1.0 kJ.mol^?1, ΔG? = ?61.4 ± 1.4 kJ.mol^‐1, Ω_Cu?In = 3.0 ± 0.4 kJ.mol^?1; for S segregation in Cu the parameters are D₀ = 8.9 ± 0.5 × 10^?3 m² s^?1, Q = 212.8 ± 3.0 kJ.mol^?1, ΔG? = ?120.0 ± 3.5 kJ.mol^?1, Ω_Cu?S = 23.0 ± 2.0 kJ mol^?1 and the In and S interaction parameter is Ω_In?S = ?4.0 ± 0.5 kJ.mol^?1. The initial parameters used for the Darken calculations were extracted from fits performed with the Fick's and Guttmann model. Copyright © 2013 John Wiley & Sons, Ltd.     

环丙沙星-钨硅多金属氧酸盐的制备及热分解动力学

A new polyoxometalate （CPFX·HCl）3H4SiW12O40·10H2O was prepared from ciprofloxacin hydrochloride and H4SiW12O40·nH2O in aqueous solution, and characterized by elemental analysis, IR spectra and DTA-TG-DTG techniques. The IR spectrum confirmed the presence of Keggin structure and the characteristic functional group for ciprofloxacin in the compound. The TG-DTA-DTG curves showed that its thermal decomposition was a four-step process consisting of simultaneous collapse of Keggin type structure. The residue of decomposition was the mixture of WO3 and SiO2, confirmed by X-ray diffraction and IR spectroscopy. The decomposition mechanism and nonisothermal kinetic parameters of the polyoxometalate were obtained from an analysis to the TG-DTG curves by the single scanning methods （the Achar method and Coats-Redfern method） and the multiple scanning methods （the Kissinger method, Flynn-Wall-Ozawa method and Starink method）. The results indicate that the kinetic equationswith parameters describing the thermal decomposition reaction are dα/dt=6.65×10^6[3（1-α）^2/3]e^-10495.5/T with E=87.26 kJ/mol and A=6.65×10^6 s^-1 for the second step,dα/dt=7.01×10^9（1-α）e^-18770.7/T with E=156.06 kJ/mol and A=7.01×10^9 s^-1 for the third step,dα/dt=9.77×10^43[（1-α）^2]e^-88980.0/T with E=739.78 kJ/mol and A=9.77×10^43 s^-1 for the fourth step.     

Thermal decomposition kinetics of diethyl dithiocarbamate complexes of copper(II) and nickel(II)

Thermogravimetric (TG), derivative thermogravimetric (DTG) and differential thermal analysis (DTA) curves of CuL₂ and NiL₂ (L^?=diethyl dithiocarbamate anion) in air are studied. The main decomposition temperature ranges are: For CuL₂, DTG 250–350°, DTA 300–320° and for NiL₂, DTG 290–390°, DTA 360–400°. Mass loss considerations at the main decomposition stages indicate conversion of the complex to sulphides. Mathematical analysis of TG data shows that first order kinetics are applicable in both cases. Kinetic parameters (energy and entropy of activation and preexponential factor) are reported.

     

Preparation and Study of Thermal Decomposition Mechanism of Zn(Thr)(AcO)_2·2H_2O

Introduction -Amino acids as additive have a wide application in medicines, foodstuff and cosmetics.1-3 The synthetic methods of amino acid have been reviewed.4,5 The solu-bility property of Zn(AcO)2-Thr-H2O (Thr=Threonine) system at 298.15 K has been investigated by the semimicro-phase equilibrium method, in which the phase region of the complex did not exist.6 The prepara-tion of Zn(Thr)SO4H2O was reported in Ref. 7∶3 times volume of acetone relative to that of water was added into t…     

Alginate polyelectrolyte ionotropic gels. XVIII. Oxidation of alginate polysaccharide by potassium permanganate in alkaline solutions: Kinetics of decomposition of intermediate complex

The kinetics of decomposition of [Alg · Mn ^VIO₄^2?] intermediate complex have been investigated spectrophotometrically at a constant ionic strength of 0.5 mol dm^?3. The decomposition reaction was found to be first-order in the intermediate concentration. The results showed that the rate of reaction was base-catalyzed. The kinetic parameters have been evaluated and found to be ΔS^? = ?103.88±6.18 J mol^?1 K^?1, ΔH^? = 51.61 ± 1.02 kJ mol^?1, and ΔG^? = 82.57 ± 2.86 kJ mol^?1, respectively. A reaction mechanism consistent with the results is discussed. © 1993 John Wiley & Sons, Inc.     

Non-isothermal kinetic for lyophilized leachate from sanitary landfill and composting usine

Leachate samples from a sanitary landfill of Araraquara city and composting usine of Vila Leopoldina, São Paulo, Brazil were lyophilized to remove the water content. TG/DTG curves at different heating rates were recorded. The second step of the thermal decomposition of leachate from the Araraquara landfill (CB₁), from the composting usine from Vila Leopoldina (CB₂) from the organic phase extracted (FO) and aqueous phase (FA) were all kinetically evaluated using the non-isothermal method.By Flynn-Wall isoconversional method the following values were obtained: E=234±3.65 kJ mol^?1 and logA=29.7±0.58 min^?1 for CB₁; E=129±1.66 kJ mol^?1 and logA=11.8±0.10 min^?1 for CB₂; E=51.6±1.35 kJ mol^?1 and logA=6.09±0.09 min^?1 for FO and E=76.91±6.33 kJ mol^?1 and logA=8.88±0.7 min^?1 for FA with 95% confidence level. Applying the procedures of Málek and Koga, SB kinetic model (?esták-Berggren) is the most appropriate to describe the decomposition of CB₁, CB₂, FO and FA.     

Researches on Thermal Decomposition Kinetics of Composite Modified Double-base Propellants

The thermal decomposition kinetics of composite modified double‐base (CMDB) propellants with a series of contents of hexogeon (RDX) was investigated by using parameters of T_eo, T_i, T_p, T_f, T_b, T_a, E, lg A and ΔH, which were obtained from using a CDR‐4P differential scanning calorimeter (DSC) and Perkin‐Elmer Pyris 1 thermogravimetric analyzer (TG) analyses with heating rates of 5, 10, 15 and 20 K/min. Reliable activation energy was calculated using Flynn‐Wall‐Ozawa method before analyzing the thermal decomposition mechanism. TG‐DTG curves were treated with Malek method in order to obtain the reaction mechanisms. The obtained results show that the thermal decomposition mechanisms with the conversion from 0.2 to 0.4 was f(α)?1/2α, and with the conversion from 0.5 to 0.7 was f(α)?(1/4)(1?α)[?ln(1?α)]^?3.     

Thermochemistry on the Complex of Erbium Perchlorate with L-α-Glutamic Acid [Er2（L-Glu）2（H2O）6]（ClO4）4·6H2O（s）

A coordination compound of erbium perchlorate with L-α-glutamic acid, [Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）, was synthesized. By chemical analysis, elemental analysis, FTIR, TG/DTG, and comparison with relevant literatures, its chemical composition and structure were established. The mechanism of thermal decomposition of the complex was deduced on the basis of the TG/DTG analysis. Low-temperature heat capacities were measured by a precision automated adiabatic calorimeter from 78 to 318 K. An endothermic peak in the heat capacity curve was observed over the temperature region of 290-318 K, which was ascribed to a solid-to-solid phase transition. The temperature Ttrans, the enthalpy △transHm and the entropy △transSm of the phase transition for the compound were determined to be： （308.73±0.45） K, （10.49±0.05） kJ·mol^-1 and （33.9±0.2） J·K^-1·mol^-1. Polynomial equation of heat capacities as a function of the temperature in the region of 78-290 K was fitted by the least square method. Standard molar enthalpies of dissolution of the mixture [2ErCl3·6H2O（s）＋2L-Glu（s）＋6NaClO4·H2O（s）] and the mixture {[Er2（Glu）2（H2O）6]（ClO4）4·6H2O（s）＋6NaCl（s）} in 100 mL of 2 mol·dm^-3 HClO4 as calorimetric solvent, and {2HClO4（1）} in the solution A＇ at T=298.15 K were measured to be, △dHm,1=（31.552±0.026） kJ·mol^-1, △dHm,2 = （41.302±0.034） kJ·mol^-1, and △dHm,3 = （ 14.986 ± 0.064） kJ·mol^-1, respectively. In accordance with Hess law, the standard molar enthalpy of formation of the complex was determined as △fHm-=-（7551.0±2.4） kJ·mol^-1 by using an isoperibol solution-reaction calorimeter and designing a thermochemical cycle.     

Low-Temperature Heat Capacities and Thermodynamic Properties of Octahydrated Barium Dihydroxide,Ba（OH）2·8H2O（s）

Low-temperature heat capacities of octahydrated barium dihydroxide, Ba（OH）2·8H2O（s）, were measured by a precision automated adiabatic calorimeter in the temperature range from T=78 to 370 K. An obvious endothermic process took place in the temperature range of 345-356 K. The peak in the heat capacity curve was correspondent to the sum of both the fusion and the first thermal decomposition or dehydration. The experimental molar heat capacifies in the temperature ranges of 78-345 K and 356-369 K were fitted to two polynomials. The peak temperature, molar enthalpy and entropy of the phase change have been determined to be （355.007±0.076） K, （73.506±0.011） kJ·ol^-1 and （207.140±0.074） J·K^-1·mol^-1, respectively, by three series of repeated heat capacity measurements in the temperature region of 298-370 K. The thermodynamic functions, （Hr-H298.15 k ）and （Sr-S298.15k）, of the compound have been calculated by the numerical integral of the two heat-eapacity polynomials. In addition, DSC and TG-DTG techniques were used for the further study of thermal behavior of the compound. The latent heat of the phase change became into a value larger than that of the normal compound because the melfing process of the compound must be accompanied by the thermal decomposition or dehydration of 71-120.     

Rate coefficients and mechanisms of the reaction of cl‐atoms with a series of unsaturated hydrocarbons under atmospheric conditions

Rate coefficients and/or mechanistic information are provided for the reaction of Cl‐atoms with a number of unsaturated species, including isoprene, methacrolein ( MACR ), methyl vinyl ketone ( MVK ), 1,3‐butadiene, trans‐2‐butene, and 1‐butene. The following Cl‐atom rate coefficients were obtained at 298 K near 1 atm total pressure: k(isoprene) = (4.3 ± 0.6) × 10^?10cm³ molecule^?1 s^?1 (independent of pressure from 6.2 to 760 Torr); k( MVK ) = (2.2 ± 0.3) × 10^?10 cm³ molecule^?1 s^?1; k( MACR ) = (2.4 ± 0.3) × 10^?10 cm³ molecule^?1 s^?1; k(trans‐2‐butene) = (4.0 ± 0.5) × 10^?10 cm³ molecule^?1 s^?1; k(1‐butene) = (3.0 ± 0.4) × 10^?10 cm³ molecule^?1 s^?1. Products observed in the Cl‐atom‐initiated oxidation of the unsaturated species at 298 K in 1 atm air are as follows (with % molar yields in parentheses): CH₂O (9.5 ± 1.0%), HCOCl (5.1 ± 0.7%), and 1‐chloro‐3‐methyl‐3‐buten‐2‐one (CMBO, not quantified) from isoprene; chloroacetaldehyde (75 ± 8%), CO₂ (58 ± 5%), CH₂O (47 ± 7%), CH₃OH (8%), HCOCl (7 ± 1%), and peracetic acid (6%) from MVK ; CO (52 ± 4%), chloroacetone (42 ± 5%), CO₂ (23 ± 2%), CH₂O (18 ± 2%), and HCOCl (5%) from MACR ; CH₂O (7 ± 1%), HCOCl (3%), acrolein (≈3%), and 4‐chlorocrotonaldehyde (CCA, not quantified) from 1,3‐butadiene; CH₃CHO (22 ± 3%), CO₂ (13 ± 2%), 3‐chloro‐2‐butanone (13 ± 4%), CH₂O (7.6 ± 1.1%), and CH₃OH (1.8 ± 0.6%) from trans‐2‐butene; and chloroacetaldehyde (20 ± 3%), CH₂O (7 ± 1%), CO₂ (4 ± 1%), and HCOCl (4 ± 1%) from 1‐butene. Product yields from both trans‐2‐butene and 1‐butene were found to be O₂‐dependent. In the case of trans‐2‐butene, the observed O₂‐dependence is the result of a competition between unimolecular decomposition of the CH₃CH(Cl)? CH(O?)? CH₃ radical and its reaction with O₂, with k_decomp/k_O2 = (1.6 ± 0.4) × 10¹⁹ molecule cm^?3. The activation energy for decomposition is estimated at 11.5 ± 1.5 kcal mol^?1. The variation of the product yields with O₂ in the case of 1‐butene results from similar competitive reaction pathways for the two β‐chlorobutoxy radicals involved in the oxidation, ClCH₂CH(O?)CH₂CH₃ and ?OCH₂CHClCH₂CH₃. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 334–353, 2003     

铀(Ⅵ)与不对称希夫碱配合物的合成和热分解反应动力学

邻苯二胺与5－氯－2－羟基二苯酮、邻香草醛作用合成了一种不对称希夫碱配体C₂₇H₂₁N₂O₃Cl（H₂L）。在正丁醇和甲醇体系中硝酸铀酰与该配体反应合成了一种固体希夫碱配合物[UO₂(HL)(NO₃)(H₂O)]·H₂O。通过元素分析、IR、UV、¹H NMR、TG-DTG及摩尔电导率分析等手段对合成的配合物进行了表征,用非等温热重法研究了铀(Ⅵ)配合物的热分解反应动力学,推断出第三步热分解的动力学方程为：d α /d t = A · e^{- E/RT} ·3/2[(1- α )^-1/3-1]^-1,得到了动力学参数E和A。并计算出了活化熵△S^¹和活化吉布斯自由能△G^¹。     

Kinetics and mechanism of decomposition of intermediate complex during oxidation of pectate polysaccharide by potassium permanganate in alkaline solutions

The kinetics of decomposition of an [Pect·Mn^VIO₄^2?] intermediate complex have been investigated spectrophotometrically at various temperatures of 15–30°C and a constant ionic strength of 0.1 mol dm^?3. The decomposition reaction was found to be first‐order in the intermediate concentration. The results showed that the rate of reaction was base‐catalyzed. The kinetic parameters have been evaluated and found to be ΔS^≠ = ? 190.06 ± 9.84 J mol^?1 K^?1, ΔH^≠ = 19.75 ± 0.57 kJ mol^?1, and ΔG^≠ = 76.39 ± 3.50 kJ mol^?1, respectively. A reaction mechanism consistent with the results is discussed. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 67–72, 2003     

Thermal Decomposition Kinetics of Triethylene Glycol Dinitrate

Introduction Triethylene glycol dinitrate (TEGDN) is a novel en-ergetic material containing two groups of NO2, which can be used as an energetic plasticizer ingredient in propellants because of its excellent proformance.1 It exhibits lower impact sensitivity, better thermostability, weaker poisonousness and volatility, and stronger effec-tiveness of plasticizing cellulose nitrate than nitroglyc-erine (NG). As a new plasticizer TEGDN has good ap-plication prospects in the near future. The…     

Simultaneous thermal analysis of zirconium(IV) acetylacetonate in a helium atmosphere

TG, DTG, DTA, DDTA and ΔH analyses of zirconium(IV) acetylacetonate, Zr(C₆H₇O₂)₄ (= I), were performed in a helium atmosphere with a Netzsch Thermal Analyser STA 429. The enthalpies of the main steps of transformation were computed to be +42.182 J·g^?1 and ?21.113 J·g^?1. Pure I is thermally stable up to about 199°C in He gas, and melting too occurs at about 199°C. Four well-defined decomposition steps were observed over the range between ambient and 600 °C, accompanied by a weight loss of 61.59%. The final product contained pure ZrO. The unique shapes of the TG and DTA curves could be used for the identification of I.     

Synthesis,structure, and kinetic studies on [RuCl2(NCCH3)2(cod)]

[RuCl₂(NCCH₃)₂(cod)], an alternative starting material to [RuCl₂(cod)] _n for the preparation of ruthenium(II) complexes, has been prepared from the polymer compound and isolated in yields up to 87% using a new work-up procedure. The compound has been obtained as a yellow solid without water of crystallization. The complexes [RuCl₂(NCR)₂(cod)] spontaneously transform into dimers [Ru₂Cl(μ-Cl)₃(cod)₂(NCR)] (R?=?Me, Ph). ¹H NMR kinetic experiments for these transformations evidenced first-order behavior. [RuCl₂(NCPh)₂(cod)] dimerizes slower by a factor of ten than [RuCl₂(NCCH₃)₂(cod)]. The following activation parameters, ΔH ^#?=?114?±?3?kJ?mol^?1 and ΔS ^#?=?66?±?9?J?K^?1?mol^?1 for R?=?CH₃CN (ΔG ^#?=?94?±?5?kJ?mol^?1, 298.15?K) and ΔH ^#?=?122?±?2?kJ?mol^?1 and ΔS ^#?=?75?±?6?J?K^?1?mol^?1 for R?=?Ph (ΔG ^#?=?100?±?4?kJ?mol^?1, 298.15?K), have been calculated from the first-order rate constants in the temperature range 294–323?K. The kinetic parameters are in agreement with a two-step mechanism with dissociation of acetonitrile as the rate-determining step. The molecular structures of [Ru₂Cl(μ-Cl)₃(cod)₂(NCR)] (R?=?Me, Ph) have been determined by X-ray diffraction.