Extraction kinetics of Uranium(VI) and Thorium(IV) with Tri-iso-amyl phosphate from nitric acid using a Lewis Cell

The extraction kinetics of uranium(VI) and thorium(IV) with Tri-iso-amyl phosphate (TiAP) from nitric acid medium has been investigated using a Lewis Cell. Especially, dependences of the extraction rate on stirring speed, temperature, interfacial area were firstly measured to elucidate the extraction kinetics regimes. The experimental results demonstrated that extraction kinetic of U(VI) is governed by chemical reactions at interface with an activation energy, E_a, of 43.41 kJ/mol, while the rate of Th(IV) extraction is proved to be intermediate controlled, of which the E_a is 23.20 kJ/mol. Reaction orders with respect to the influencing parameters of the extraction rate are determined, and the rate equations of U(VI) and Th(IV) at 293 K have been proposed as $$ {\text{r}} = - {\text{dcUO}}_{ 2} \left( {{\text{NO}}_{ 3} } \right)_{ 2} /{\text{dt}} = 1. 80 \times 10^{ - 3} \left[ {{\text{UO}}_{ 2} \left( {{\text{NO}}_{ 3} } \right)_{ 2} } \right]^{ 1.0 1} \left[ {\text{TiAP}} \right]^{0. 5 5} , $$ $$ {\text{r}} = - {\text{dcTh }}\left( {{\text{NO}}_{ 3} } \right)_{ 4} /{\text{dt}} = 1. 8 8\times 10^{ - 3} \left[ {{\text{Th }}\left( {{\text{NO}}_{ 3} } \right)_{ 4} } \right]^{ 1.0 4} \left[ {\text{TiAP}} \right]^{ 1. 7 7} \left[ {{\text{HNO}}_{ 3} } \right]^{0. 3 8} , $$ respectively.     

Thermodynamic study of metal corrosion and inhibitor adsorption processes in copper/N-1-naphthylethylenediamine dihydrochloride monomethanolate/nitric acid system: part 2

N-1-Naphthylethylenediamine dihydrochloride monomethanolate (N-NEDHME) was tested as a corrosion inhibitor for copper in 2 M HNO₃ solution using the standard gravimetric technique at 303–343 K. N-NEDHME acts as an inhibitor for copper in an acidic medium. Inhibition efficiency increases with increase in concentration of N-NEDHME but decreases with a rise in temperature. Thermodynamic parameters such as adsorption heat ( $ \Updelta H_{\text{ads}}^\circ $ ), adsorption entropy ( $ \Updelta S_{\text{ads}}^\circ $ ) and adsorption free energy ( $ \Updelta G_{\text{ads}}^\circ $ ) were obtained from experimental data of the temperature studies of the inhibition process at five temperatures ranging from 303 to 343 K. Kinetic parameters activation such as $ E_{a} $ , $ \Updelta H_{\text{a}}^\circ $ , $ \Updelta S_{\text{a}}^\circ $ and pre-exponential factors have been calculated and are discussed. Adsorption of N-NEDHME on the copper surface in 2 M HNO₃ follows the Langmuir isotherm model.     

Vibratio nal assig nme nts,co nformatio nal a nalysis,a nd molecular structures of $$\left[ {\text{C}_{\text{ n}} \text{mim}} \right]\left[ {\text{NTF}_{\text{2}} } \right]$$C nmimNTF2 ( n = 2, 4, 6, a nd 8) imidazolium-based io nic liquids: a combi ned experime ntal a nd qua ntum chemical approach

This work is aimed at providing physical insights about the interactions of cations, anion, and ion pairs of four imidazolium-based ionic liquids of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) with varying alkyl chain lengths (n = 2, 4, 6, and 8) using both DFT calculations and vibrational spectroscopic measurements (IR absorption and Raman scattering) in the mid- and far regions. The calculated Mulliken charge distributions of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) ion pairs indicate that hydrogen-bonding interactions between oxygen and nitrogen atoms (more negative charge) on \(\left[ {{\text{NTF}}_{2} } \right]^{ - }\) anion and the hydrogen atoms (more positive charge) on the imidazolium ring play a dominating role in the formation of ion pair. Thirteen stable conformers of \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) were optimized. According to our results, the strongest and weakest hydrogen bonds were existing in \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), respectively. A redshift of 290, 262, 258, and 257 cm^?1 has been observed for cations involving \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]^{ + }\), \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]^{ + }\),\(\left[ {{\text{C}}_{6} {\text{mim}}} \right]^{ + }\), and stretching vibrations of \({\text{C}}12{-}{\text{H}}3\), respectively. By increasing the chain length, the strength of hydrogen bonds decreases as a result of \({\text{C}}12{-}{\text{H}}3\) bond elongation and less changes are observed in stretching vibrations of \({\text{C}}12{-}{\text{H}}3\) compared to the free cations. To the best of our knowledge, this research is the first work which reports the far-IR of \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), \(\left[ {{\text{C}}_{6} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and the mid-IR of \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\).     

Redox behavior of $${\text{VO}}^{2 + } / {\text{VO}}_{2}^{ + }$$ as a simulant of $${\text{NpO}}_{2}^{ + } / {\text{NpO}}_{2}^{2 + }$$NpO2+/NpO22+ in boiling nitric acid solution

To evaluate the redox behavior of \({\text{VO}}^{2 + } / {\text{VO}}_{2}^{ + }\) as a simulant of \({\text{NpO}}_{2}^{ + } / {\text{NpO}}_{2}^{2 + }\) in boiling nitric acid solution, i.e., typical operating conditions for nuclear fuel reprocessing plants, oxidation rate measurements for VO²⁺ in boiling and non-boiling nitric acid solutions, thermodynamic calculations, and kinetic calculations were performed. The results indicated that the apparent oxidation rate of VO²⁺ to \({\text{VO}}_{2}^{ + }\) is accelerated by a decrease in \({\text{NO}}_{2}^{ - }\) and HNO₂ concentrations owing to the boiling phenomena of nitric acid solution.     

Compatibility of activity coefficients estimated experimentally and by Pitzer equations for the assessment of seawater pH

Calibration of pH meters is usually performed with reference pH buffer solutions of low ionic strength, I ≤ 0.1 mol kg^?1. For seawater pH measurements (I ≈ 0.7 mol kg^?1), calibration buffers in high ionic strength matrix are required. The Harned cell, in association with the Nernst equation and a model for estimating the chloride ion activity coefficient, \(\gamma_{{{\text{Cl}}^{ - } }} ,\) is the basis of the primary method for pH assignment to reference pH buffers. The semi-empirical Pitzer model is, in principle, adequate to estimate \(\gamma_{{{\text{Cl}}^{ - } }}\) of complex solutions, namely seawater. Nevertheless, no assessment of the validity of the model for this matrix is known to the authors. This work aims at estimating the adequacy of the Pitzer model by assessing the metrological compatibility of mean activity coefficients, in this case \(\gamma_{ \pm } = \sqrt {\gamma_{{{\text{H}}^{ + } }} \gamma_{{{\text{Cl}}^{ - } }} }\) estimated experimentally with the Harned cell, \(\gamma_{ \pm }^{\text{Exp}} ,\) and using the Pitzer model, \(\gamma_{ \pm }^{\text{Ptz}}\). The measurement uncertainty considered in the compatibility test was estimated using the bottom-up approach, where components were combined by the numerical Kragten method after checking its adequacy. The compatibility of the estimated \(\gamma_{ \pm }\) was assessed for solutions with increasing complexity and an ionic strength of 0.67 mol kg^–1. \(\gamma_{ \pm }^{\text{Exp}}\) and \(\gamma_{ \pm }^{Ptz}\) are metrologically compatible for a confidence level of 95 % where the relative standard uncertainty of their difference ranged from 1.1 % to 3.1 % in all chloride solutions to approximately 6.3 % when sodium sulfate was also present. This led to assume the validity of the Pitzer model equations to estimate \(\gamma_{{{\text{Cl}}^{ - } }} ,\) required to define reference pH values of buffer solutions with high ionic strength.     

The Radial Distribution of Ions and Electrons in RF Inductively Coupled H<Subscript>2</Subscript>/T<Subscript>2</Subscript>B Plasmas

A glow discharge polymer (GDP) was fabricated using trans-2-butene (T₂B) and hydrogen (H₂) via a plasma-enhanced chemical vapor deposition (PECVD) system. The uniformity of the GDP films was significantly affected by the radial distribution of the H₂/T₂B plasma parameters. The plasma properties while discharging by a multi-carbon gas source of mixed H₂/T₂B were investigated during the GDP deposition process. The main positive ions and ion energy distributions in inductively coupled H₂/T₂B plasmas were analyzed by energy-resolved mass spectrometer (MS), and the electron density and the effective electron temperature were mainly analyzed using a Langmuir probe. The MS results show that the main positive ions in the plasmas are \({\text{C}}_{ 2} {\text{H}}_{ 4}^{ + }\), \({\text{C}}_{ 2} {\text{H}}_{ 6}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 3}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 6}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 8}^{ + }\), \({\text{C}}_{ 4} {\text{H}}_{ 5}^{ + }\), \({\text{C}}_{ 4} {\text{H}}_{ 1 0}^{ + }\), \({\text{C}}_{ 5} {\text{H}}_{ 5}^{ + }\), and \({\text{C}}_{ 5} {\text{H}}_{ 7}^{ + }\) with mass-to-charge ratios (m/e) of 28, 30, 39, 42, 44, 53, 58, 65, and 67, respectively. For a normalized ion intensity, the relative intensities of saturated CH ions increase with increasing radial distance, while the unsaturated CH ions decrease with increasing radial distance. The ion energy distribution of \({\text{C}}_{ 2} {\text{H}}_{ 6}^{ + }\) (m/e = 30) presents a bimodal structure. Additionally, both the electron density and the effective electron temperature decrease with increasing radial distance.     

Hierarchical enumeration of Kekulé’s benzenes,Ladenburg’s benzenes,Dewar’s benzenes,and benzvalenes by using combined-permutation representations

The group hierarchy for each skeleton of ligancy 6 is formulated to be: point group (PG \({\varvec{G}}_{\sigma }\)) \(\subseteq \) RS-stereoisomeric group (RS-SIG \({\varvec{G}}_{\sigma \widetilde{\sigma }\widehat{I}}\)) \(\subseteq \) stereoisomeric group (SIG \(\widetilde{{\varvec{G}}}_{\sigma \widetilde{\sigma }\widehat{I}}\)) \(\subseteq \) isoskeletomeric group (ISG \(\widetilde{\widetilde{{\varvec{G}}}}_{\sigma \widetilde{\sigma }\widehat{I}}\) = \({\varvec{S}}^{[6]}_{\sigma \widehat{I}}\)), where we start from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{D}}_{6h}\) for the Kekulé benzene skeleton, from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{D}}_{3h}\) for the Ladenburg benzene skeleton, from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{C}}_{2v}\) for the Dewar benzene skeleton, or from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{C}}_{2v}\) for the benzvalene skeleton. After these groups are constructed as combined-permutation representations, the calculation of the respective cycle indices with chirality fittingness (CI-CFs) and the introduction of ligand-inventory functions are conducted to give generation functions for 3D-based enumerations (for PGs and RS-SIGs) and 2D-based enumerations (for SIGs and ISGs). The enumeration results are discussed by means of isomer-classification diagrams, in which equivalence classes under enantiomerism (for PGs), RS-stereoisomerism (for RS-SIGs), stereoisomerism (for SIGs), and isoskeletomerism (for ISGs) are illustrated schematically. The implicit connotations of the conventional terms “skeletal isomerism”, “positional isomerism”, and “constitutional isomerism” are discussed, where the effects of the concept of isoskeletomerism are emphasized.     

Thermochemical properties of the coordination complex of 8-hydroxyquinolinato-bis-(salicylato) praseodymium (III)

The product, [Pr(C₇H₅O₃)₂(C₉H₆NO)], which was formed by praseodymium nitrate hexahydrate, salicylic acid (C₇H₆O₃), and 8-hydroxyquinoline (C₉H₇NO), was synthesized and characterized by elemental analysis, UV spectra, IR spectra, molar conductance, and thermogravimetric analysis. In an optimalizing calorimetric solvent, the dissolution enthalpies of [Pr(NO₃)₃·6H₂O(s)], [2 C₇H₆O₃(s) + C₉H₇NO(s)], [Pr(C₇H₅O₃)₂(C₉H₆NO)(s)], and [solution D (aq)] were measured to be, by means of a solution-reaction isoperibol microcalorimeter, $ \begin{gathered}\Updelta_{\text{s}} H_{\text{m}}^{\theta}\left[ {{ \Pr }\left( {{\text{NO}}_{ 3} } \right)_{ 3} \cdot 6{\text{H}}_{ 2} {\text{O}}\left( {\text{s}} \right), 2 9 8. 1 5{\text{ K}}} \right] \, = - ( 20. 6 6 { } \pm \, 0. 29)\,{\text{kJ}}\,{\text{mol}}^{ - 1} , \\\Updelta_{\text{s}} H_{\text{m}}^{\theta } \left[ { 2 {\text{C}}_{7} {\text{H}}_{ 6} {\text{O}}_{ 3} \left( {\text{s}} \right) +{\text{ C}}_{ 9} {\text{H}}_{ 7} {\text{NO}}\left( {\text{s}}\right),{ 298}. 1 5 {\text{ K}}} \right] \, = \, ( 4 2. 2 7 { }\pm \, 0. 3 1)\,{\text{kJ}}\,{\text{mol}}^{ - 1} , \\\Updelta_{\text{s}} H_{\text{m}}^{\theta } \left[ {{\text{solutionD }}\left( {\text{aq}} \right), 2 9 8. 1 5 {\text{ K}}} \right] \,= - \left( { 8 9. 1 5 { } \pm \, 0. 4 3}\right)\,{\text{kJ}}\,{\text{mol}}^{ - 1} , \\\end{gathered} $ Δ s H m θ [ Pr ( NO 3 ) 3 · 6 H 2 O ( s ) , 2 9 8.1 5 K ] = ? ( 20.6 6 ± 0.2 9 ) kJ mol ? 1 , Δ s H m θ [ 2 C 7 H 6 O 3 ( s ) + C 9 H 7 NO ( s ) , 298.1 5 K ] = ( 4 2.2 7 ± 0.3 1 ) kJ mol ? 1 , Δ s H m θ [ solution D ( aq ) , 2 9 8.1 5 K ] = ? ( 8 9.1 5 ± 0.4 3 ) kJ mol ? 1 , and $ \Updelta_{\text{s}} H_{\text{m}}^{\theta } \left\{ {\left[ {{\Pr }\left( {{\text{C}}_{ 7} {\text{H}}_{ 5} {\text{O}}_{ 3} }\right)_{ 2} \left( {{\text{C}}_{ 9} {\text{H}}_{ 6} {\text{NO}}}\right)} \right]\left( {\text{s}} \right),{ 298}. 1 5 {\text{ K}}}\right\} \, = - \left( { 4 1.0 4 { } \pm \, 0. 3 3}\right)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ Δ s H m θ { [ Pr ( C 7 H 5 O 3 ) 2 ( C 9 H 6 NO ) ] ( s ) , 298.1 5 K } = ? ( 4 1.0 4 ± 0.3 3 ) kJ mol ? 1 , respectively. Through an improved thermochemical cycle, the enthalpy change of the designed coordination reaction was calculated to be $\Updelta_{\text{r}} H_{\text{m}}^{\theta} = \, ( 2 1 3. 1 8\pm0. 6 9)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ Δ r H m θ = ( 2 1 3.1 8 ± 0.6 9 ) kJ mol ? 1 , the standard molar enthalpy of the formation was determined as $ \Updelta_{\text{f}} H_{\text{m}}^{\theta} \left\{ {\left[ {{\Pr }\left( {{\text{C}}_{ 7} {\text{H}}_{ 5} {\text{O}}_{ 3} }\right)_{ 2} \left( {{\text{C}}_{ 9} {\text{H}}_{ 6} {\text{NO}}}\right)} \right]\left( {\text{s}} \right), 2 9 8. 1 5 {\text{K}}}\right\} \, = \, - \, ( 1 8 7 5. 4\pm 3.1)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ Δ f H m θ { [ Pr ( C 7 H 5 O 3 ) 2 ( C 9 H 6 NO ) ] ( s ) , 2 9 8.1 5 K } = ? ( 1 8 7 5.4 ± 3.1 ) kJ mol ? 1 .     

Synthesis and structural characterization of three dinuclear Copper(II) complexes incorporating pyrazolyl-derived ligands

Three new binuclear copper complexes of formulae $ \left[ {{\text{Cu}}_{2}^{\text{II}} {\text{Pz}}_{2}^{\text{Me3}} {\text{Br}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (1), $ \left[ {{\text{Cu}}_{ 2}^{\text{II}} {\text{Pz}}_{2}^{\text{Ph2Me}} {\text{Cl}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (2) and $ \left[ {{\text{Cu}}_{2}^{\text{II}} \left( {{\text{Pz}}^{\text{PhMe}} } \right)_{ 4} {\text{Cl}}_{ 4} } \right] $ (3) (Pz^Me3?=?3,4,5-trimethylpyrazole, Pz^Ph2Me?=?4-methyl-3,5-diphenylpyrazole and Pz^PhMe?=?3-methyl-5-phenylpyrazole) have been synthesized and characterized by chemical analysis, FTIR and ³¹P NMR spectroscopy and single-crystal X-ray diffraction. Complex 1 is a doubly bromo-bridged dimer, while complexes 2 and 3 are chloro-bridged dimers. The Cu(II) centers are in a distorted tetrahedral geometry for 1 and 2 and a distorted square pyramidal N₂Cl₃ environment for 3.     

Additional Aspects of Complexation of Gold(I) with Thiomalate

Some equilibria involving gold(I) thiomalate (mercaptosuccinate, TM) complexes have been studied in the aqueous solution at 25 °C and I?=?0.2 mol·L^?1 (NaCl). In the acidic region, the oxidation of TM by \( {\text{AuCl}}_{4}^{ - } \) proceeds with the formation of sulfinic acid, and gold(III) is reduced to gold(I). The interaction of gold(I) with TM at n_TM/n_Au?≤?1 leads to the formation of highly stable cyclic polymeric complexes \( {\text{Au}}_{m} \left( {\text{TM}} \right)_{m}^{*} \) with various degrees of protonation depending on pH. In general, the results agree with the tetrameric form of this complex proposed in the literature. At n_TM/n_Au?>?1, the processes of opening the cyclic structure, depolymerization and the formation of \( {\text{Au}}\left( {\text{TM}} \right)_{2}^{*} \) occur: \( {\text{Au}}_{4} ( {\text{TM)}}_{4}^{8 - } + {\text{TM}}^{3 - } \rightleftharpoons {\text{Au}}_{ 4} ( {\text{TM)}}_{5}^{11 - } \), log₁₀ K₄₅?=?10.1?±?0.5; 0.25 \( {\text{Au}}_{4} ( {\text{TM)}}_{4}^{8 - } + {\text{TM}}^{3 - } \rightleftharpoons {\text{Au(TM)}}_{2}^{5 - } \), log₁₀ K₁₂?=?4.9?±?0.2. The standard potential of \( {\text{Au(TM)}}_{2}^{5 - } \) is \( E_{1/0}^{ \circ } = -0. 2 5 5\pm 0.0 30{\text{ V}} \). The numerous protonation processes of complexes at pH?<?7 were described with the use of effective functions.     

Crystallization study of Se<Subscript>86</Subscript>Sb<Subscript>14</Subscript> glass

The present study concerns with high-accuracy determination of crystallization activation energy (\(E_{\text{c}}\)), the frequency factor (\(k_{0}\)), the kinetic exponent (n) for Se₈₆Sb₁₄ glass. Different three methods have been used to investigate the \(E_{\text{c}} \,{\text{and}}\,k_{0 }\) values. It was found that the deduced value of k ₀ based on Kissinger’s method is too small compared with the others. Therefore, it can’t be used to investigate k ₀ value. Where \(E_{\text{c}} \,{\text{and}}\,k_{0}\) values are already known, the overall reaction rate \(k = k_{0 } { \exp }\left( { - E_{\text{c}} /\left( {R \cdot T} \right)} \right)\) at any temperature can be calculated. Now, Avrami’s equation (\(\chi = 1 - { \exp }\left( { - \left( {kt} \right)^{\text{n}} } \right)\)) contains only one unknown which is the kinetic exponent (n). This method enables us to determine n value without any approximations. The values’ crystallization fraction \((\chi_{\text{th}} )\) that theoretically calculated is the same as that experimentally investigated \((\chi_{{{ \exp } .}} )\).     

Effect of size of tetraalkylammonium counterions on the temperature dependent micellization of AOT in aqueous medium

Different tetraalkylammonium, viz. N⁺(CH₃)₄, N⁺(C₂H₅)₄, N⁺(C₃H₇)₄, N⁺(C₄H₉)₄ along with simple ammonium salts of bis (2-ethylhexyl) sulfosuccinic acid have been prepared by ion-exchange technique. The critical micelle concentration of surfactants with varied counterions have been determined by measuring surface tension and conductivity within the temperature range 283–313 K. Counterion ionization constant, α, and thermodynamic parameters for micellization process viz., $\Delta G_m^{\text{0}} $ , $\Delta H_m^{\text{0}} $ , and $\Delta S_m^{\text{0}} $ and also the surface parameters, Γ_max and A_min, in aqueous solution have been determined. Large negative $\Delta G_m^{\text{0}} $ of micellization for all the above counterions supports the spontaneity of micellization. The value of standard free energy, $\Delta G_m^{\text{0}} $ , for different counterions followed the order $${\text{N}}^{\text{ + }} \left( {{\text{CH}}_{\text{3}} } \right)_4 >{\text{NH}}_{\text{4}}^{\text{ + }} >{\text{Na}}^{\text{ + }} >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{2}} {\text{H}}_5 } \right)_{\text{4}} {\text{ $>$ N}}^{\text{ + }} \left( {{\text{C}}_{\text{3}} {\text{H}}_{\text{7}} } \right)_4 >{\text{N}}^{\text{ + }} \left( {{\text{C}}_{\text{4}} {\text{H}}_{\text{9}} } \right)_4 $$ , at a given temperature. This result can be well explained in terms of bulkiness and nature of hydration of the counterion together with hydrophobic and electrostatic interactions.     

Specific heat capacity and thermodynamic properties of CuTeO3 and HgTeO3

Tellurites of CuTeO₃ and HgTeO₃ are synthesized and their specific molar heat capacities are experimentally determined for the first time. The tellurites discussed in the present paper are used for preparation of optical glasses with special properties for optoelectronics, nuclear and power industries. The tellurites synthesized are prepared for chemical analysis, differential thermal analysis and X-ray analysis. The use of the tellurites studied is related to knowing their thermodynamic properties like specific molar heat capacity (C _p,m), enthalpy \( \left( {\Delta_{{{\text {T}}^{\prime}}}^{\text{T}} H_{\text{m}}^{0} } \right), \) entropy \( \left( {\Delta_{{{\text {T}}^{\prime}}}^{\text{T}} S_{\text{m}}^{0} } \right) \) and Gibbs energy \( \left( { - \Delta_{{{\text {T}}^{\prime}}}^{\text{T}} G_{\text{m}}^{0} } \right) \) . The temperature dependences of their molar heat capacities are determined using the least squares method. The thermodynamic properties are calculated: entropy, enthalpy and Gibbs function.     

Isosaccharinate Complexes of Fe(III)

Prior to this study there were no thermodynamic data for isosaccharinate (ISA) complexes of Fe(III) in the environmental range of pH (>~4.5). This study was undertaken to obtain such data in order to predict Fe(III) behavior in the presence of ISA. The solubility of Fe(OH)₃(2-line ferrihydrite), referred to as Fe(OH)₃(s), was studied at 22?±?2?°C in: (1) very acidic (0.01?mol·dm^?3 H⁺) to highly alkaline conditions (3?mol·dm^?3 NaOH) as a function of time (11?C421?days), and fixed concentrations of 0.01 or 0.001?mol·dm^?3 NaISA; and (2) as a function of NaISA concentrations ranging from approximately 0.0001 to 0.256?mol·dm^?3 and at fixed pH values of approximately 4.5 and 11.6 to determine the ISA complexes of Fe(III). The data were interpreted using the SIT model that included previously reported stability constants for $ {{\text{Fe(ISA}})_{n}}^{3 - n} $ (with n varying from 1 to 4) and Fe(III)?COH complexes, and the solubility product for Fe(OH)₃(s) along with the values for two additional complexes (Fe(OH)₂(ISA)(aq) and $ {\text{Fe(OH)}}_{ 3} ( {{\text{ISA}})_{2}}^{2 - } $ ) determined in this study. These extensive data provided a log₁₀ K ⁰ value of 1.55?±?0.38 for the reaction $ ({\text{Fe}}^{ 3+ } + {\text{ISA}}^{-} + 2 {\text{H}}_{ 2} {\text{O}} \rightleftarrows {\text{Fe(OH}})_{ 2} {\text{ISA(aq}}) + 2 {\text{H}}^{ + } ) $ and a value of ?3.27?±?0.32 for the reaction $ ({\text{Fe}}^{ 3+ } + 2 {\text{ISA}}^{-} + 3 {\text{H}}_{ 2} {\text{O}} \rightleftarrows {\text{Fe(OH)}}_{ 3} ( {\text{ISA}})_{2}^{2 - } + 3 {\text{H}}^{ + } ) $ and show that ISA forms strong complexes with Fe(III) which significantly increase the Fe(OH)₃(s) solubility at pH?<~12. Thermodynamic calculations show that competition of Fe(III) with tetravalent ions for ISA does not significantly affect the solubilities of tetravalent hydrous oxides (e.g., Th and Np(IV)) in ISA solutions.     

Thermodynamic stability of CaThF6(cr) by transpiration and e.m.f. techniques

In the present paper, we report the standard molar Gibbs energy of formation for CaThF₆ measured by gas equilibration and e.m.f. methods. The HF(g) vapour pressure over the equilibrium reaction: \({\text{CaThF}}_{6} \left( {\text{cr}} \right) + 2 {\text{H}}_{ 2} {\text{O}}\left( {\text{g}} \right) = {\text{CaF}}_{2} \left( {\text{cr}} \right) + {\text{ThO}}_{2} \left( {\text{cr}} \right) + 4{\text{HF}}\left( {\text{g}} \right)\) has been measured using transpiration technique. The above reaction mechanism has been established employing TG and XRD techniques. A fluoride e.m.f. cell: (−)Pt, CaF₂(cr) + ThOF₂(cr) + CaThF₆(cr) |CaF₂(cr)| NiO(cr) + NiF₂(cr), Pt(+) has been constructed to measure Gibbs energy of formation of CaThF₆ (cr) using CaF₂ (cr) as a solid electrolyte. The isobaric heat capacity \({\text{Cp}}_{\text{m}}^{{\circ }} \left( T \right)\) of the compound has been measured using differential scanning calorimetric technique. Based on the experimental results, thermodynamic functions for CaThF₆ have been generated.

     

Dissociation Behavior of <Emphasis Type="SmallCaps">l</Emphasis>(+)-Lactic Acid in Aqueous Solutions of (1-Alkyl-4-methylpyridinium bromide + Poly (ethyleneglycol)) at <Emphasis Type="Italic">T</Emphasis> = (288.15–318.15) K

The effect of 1-alkyl-4-methylpyridinium based ionic liquids on the conductivity behavior of l(+)-lactic acid (LaH) was studied in Poly(ethylene glycol) (PEG) aqueous solutions. The molar conductivities of LaH in the aqueous solutions of PEG, (PEG + 1-hexyl-4-methylpyridinium bromide) and (PEG + 1-octyl-4-methylpyridinium bromide) were measured over the temperature ranges of 288.15–318.15 K. The molar conductivity data were analyzed by applying the Quint–Viallard (QV) conductivity equation to determine the limiting molar conductivities (Λ ⁰) and dissociation constants (\( K_{\text{D}} \)). The results show that the values of limiting molar conductivity increased as the temperature increased, which indicates that the dissociation process is endothermic. The \( K_{\text{D}} \) values were also used to calculate the dissociation standard thermodynamic functions (\( \Delta G_{\text{D}}^{0} \), \( \Delta S_{\text{D}}^{0} \) and \( \Delta H_{\text{D}}^{0} \)). The results revealed that the dissociation process of LaH is controlled by entropy at all temperatures.     

Physico-chemical Investigation of Mixed Micelle Formation Between Tetradecyltrimethylammonium Bromide and Dodecyltrimethylammonium Chloride in Water and Aqueous Solutions of Sodium Chloride

Conductometric measurements have been employed to gain a detailed insight into the interactions between two cationic surfactants, tetradecyltrimethylammonium bromide (TTAB) and dodecyltrimethylammonium chloride (DTAC), in water and in an aqueous solution of sodium chloride. The experimental data were analyzed according to Rubingh’s model within the framework of the pseudophase separation model. The evaluated values of critical micelle concentration (cmc) were found to be lower than their corresponding cmc ^id values, signifying attractive interactions involving both components in the solutions. The micellar mole fractions (\( X_{1}^{\text{Rub}} \)) of TTAB evaluated by Rubingh’s model were always larger than the ideal values (\( X_{1}^{\text{id}} \)), signifying the higher involvement of TTAB in mixed micelles of TTAB and DTAC. Activity coefficients (\( f_{ 1}^{\text{Rub}} \) and \( f_{ 2}^{\text{Rub}} \)) were always below one in all cases signifying synergism in the mixed micelles. All the outcomes point to synergism and attractive interactions in the mixed systems. Values of excess Gibbs energy were evaluated by employing Rubingh’s model (\( \Delta G_{\text{ex}}^{\text{Rub}} \)) and the \( \Delta G_{\text{ex}}^{\text{Rub}} \) values obtained are negative. The values of \( \Delta H_{\text{m}}^{\text{o}} \) and \( \Delta S_{\text{m}}^{\text{o}} \) reveal that hydrophobic interaction is expected to be the binding force between TTAB and DTAC in aqueous media at lower temperatures, while both hydrophobic interactions as well as exothermic interactions are involved at higher temperatures. The interaction forces between the surfactants were found to be enhanced in the presence of NaCl.     

Densities,Ultrasonic Velocities,Excess Properties and IR Spectra of Binary Liquid Mixtures of Organic Esters (Ethyl Lactate,Some Organic Carbonates)

Organic esters of carbonic acid {dimethyl carbonate (DMC)/diethyl carbonate (DEC)/propylene carbonate (PC)}, in combination with a lactate ester {ethyl lactate (EL)}, with green chemistry characteristics were chosen for the present study of molecular interactions in binary liquid mixtures. Densities (ρ) and ultrasonic velocities (U) of the pure solvents and liquid mixtures were measured experimentally over the entire composition range at temperatures (303.15, 308.15, 313.15 and 318.15) K and atmospheric pressure. The experimental data was used to calculate thermodynamic and acoustic parameters \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \), \( L_{\text{f}}^{\text{E}} \), \( \bar{V}_{\text{m,1}}^{{}} \), \( \bar{V}_{\text{m,2}}^{{}} \), \( \bar{V}_{\text{m,1}}^{\text{E}} \), \( \bar{V}_{\text{m,2}}^{\text{E}} \), \( \bar{V}_{ 1}^{\text{E,0}} \) and \( \bar{V}_{ 2}^{\text{E,0}} \) and the excess functions were fitted with the Redlich–Kister polynomial equation to obtain the binary solution coefficients and the standard deviations. It was observed that the values of \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \) are positive for the mixtures of (EL + DMC/DEC) and negative for those of (EL + PC) over the entire range of composition and temperature. The positive values of \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \) indicate the action of dispersion forces between the component molecules of (EL + DMC/DEC) mixtures whereas negative values for the mixture (EL + PC) suggest the existence of strong specific interactions between the component molecules, probably resulting from chemical and structural contributions. The excess properties have also been analyzed by using the reduced (\( Y^{\text{E}} /x_{1} x_{2} \)) excess function approach and the results are found to be in agreement with those from the corresponding \( Y^{\text{E}} \)(= \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \)) values. This is further supported by FTIR spectral analysis.     

Enthalpy increments and thermodynamic functions of rare earth samarium titanates RESmTi<Subscript>2</Subscript>O<Subscript>7</Subscript>(s) (RE = Gd,Dy)

Enthalpy measurements have been taken on GdSmTi₂O₇ and DySmTi₂O₇ by using a high-temperature differential calorimeter at temperature between 800 and 1655 K. Thermodynamic function, such as heat capacity, entropy and Gibbs energy functions of GdSmTi₂O₇ and DySmTi₂O₇, was derived using the data obtained in this study. The results are presented and compared with the data available in the literature. The polynomial expression of enthalpy increments obtained for GdSmTi₂O₇(s) and DySmTi₂O₇(s) in the temperature range 298–1700 K is given as: \(\begin{aligned} H_{\text{T}}^{0} - H_{298}^{0} / {\text{J}}\,{\text{mol}}^{ - 1} & = 252.961\,T \, + 1.596 \times 10^{ - 2} \,T^{2} + 3.705 \times 10^{6} \,T^{ - 1} - 89{,}265\quad ({\text{GdSmTi}}_{2} {\text{O}}_{7} ) \\ H_{\text{T}}^{0} - H_{298}^{0} / {\text{J}}\,{\text{mol}}^{ - 1} & = 256.504\,T \, + 1.576 \times 10^{ - 2} \,T^{2} + 3.531 \times 10^{6} \,T^{ - 1} - 89{,}721\quad \left( {{\text{DySmTi}}_{2} {\text{O}}_{7} } \right). \\ \end{aligned}\)     

Thermodynamic investigations of 1-ethyl-3-methylimidazolium tetrafluoroborate and cycloalkanone mixtures

The densities, ρ, speeds of sound, u, and heat capacities, (C _P)_mix, for binary 1-ethyl-3-methylimidazolium tetrafluoroborate (1) + cyclopentanone or cyclohexanone (2) mixtures within temperature range (293.15–308.15 K) and excess molar enthalpies, H ^E, at 298.15 K have been measured over the entire composition range. The excess molar volumes, V ^E, excess isentropic compressibilities, \( \kappa_{\text{S}}^{\text{E}}, \) and excess heat capacities, \( C_{\text{P}}^{\text{E}}, \) have been computed from the experimental results. The V ^E, \( \kappa_{\text{S}}^{\text{E}} \) , H ^E, and \( C_{\text{P}}^{\text{E}} \) values have been calculated and compared with calculated values from Graph theory. It has been observed that V ^E, \( \kappa_{\text{S}}^{\text{E}} \) , H ^E, and \( C_{\text{P}}^{\text{E}} \) values were predicted by Graph theory compare well with their experimental values. The V ^E, \( \kappa_{\text{S}}^{\text{E}}, \) and H ^E thermodynamic properties have also been analyzed in terms of Prigogine–Flory–Patterson theory.