Hydroxy Naphthol Blue as a Spectrophotometric and Fluorometric Reagent for the Uranyl Ion

Abstract

The utility of hydroxy naphthol blue (HNB) as a spectrophotometric and fluorometric reagent for the uranyl ion has been investigated. In phthalate buffer (at a pH of 4.0), UO₂ ²⁺ forms a brown complex of low absorptivity with the red form of HNB. By following the decrease in HNB absorbance at 530 nm (which has ε = 4.1 × 10³) uranyl ion can be determined to levels as low as 1.1 × 10^?6 M (0.30 μg/ml). HNB also emits at 460 nm when excited at 365 nm at these pH values, while the UO₂ ²⁺ complex exhibits greatly reduced emission. Examination of the quenching of HNB emission by UO₂ ²⁺ allows the determination of uranyl ion to levels as low as 3.2 × 10^?6 M (0.86 μg/ml). A 1:1 type complex was formed between UO₂ ²⁺ and HNB, and a formation constant of 9.77 × 10³ (log K₁ = 3.99) was measured for the complex.     

Enhanced chromatographic separation of cobalt and uranyl ions using tin (IV) antimonate column from aqueous solution

The effect of electric field on tin (IV) antimonate column bed to separate cobalt and uranium was investigated. Separation was carried out from nitrate solution and ionic strength of 0.6. Variation of applied potential, time and pH were investigated. Ion mobilities at pH 1 are calculated and given to be 5.5 × 10^?4 and 2.73 × 10^?4 cm² V^?1 s^?1 for cobalt and uranyl ion respectively. Number of theoretical plate heights were calculated from the breakthrough curve and given to be 354 and 210 for cobalt and uranyl ions, respectively. Diffusion coefficient were calculated according to Nernst equation and found to be of 7.6 × 10^?6 and 3.5 × 10^?6 cm² s^?1 for cobalt and uranyl ions, respectively. Also, breakthrough capacities were calculated and found to be 0.7 mmol g^?1 for cobalt ion and 0.4 mmol g^?1 for uranyl ion, respectively.     

Complexing Properties of Uranium and Lanthanoids With 4-(2-Thiazolylazo)-6-Chlororesorcinol

Abstract

4-(2-Thiazolylazo)-6-chlororesorcinol (TAR-Cl) reacts sensitively with uranyl(II) and lanthanoids(III), and forms reddish-brown 1:1 and 1:2 complexes. The complexing behaviors were examined spectrophotometrically. The absorption maxima of the complexes are focused near 553 nm and the optimum pH for complexation lies between 6.5–8.8. Beer's law holds up to about 2 × 10^?5 mol 1^?1, with a molar absorptivity of 3.00 × 10⁴ 1 mol^?1 cm^?1 for uranium and 6 × 10⁴ 1 mol^?1 cm^?1 level for each lanthanoid. The absorptivities are increased with the atomic number, especially in light lanthanoids, that are correlative both to the lanthanoid contraction and the basicity of ortho hydroxyl group in the resorcinol ring, but such effects are not clearly recognized in heavy lanthanoids. Effect of masking agents was also examined, and uranium could be determined selectively in the presence of lanthanoid mixtures by the addition of CyDTA.     

Lanthanide‐Based Layer‐Type Two‐Dimensional Coordination Polymers Featuring Slow Magnetic Relaxation,Magnetocaloric Effect and Proton Conductivity

Three lanthanide‐based two‐dimensional (2D) coordination polymers (CPs), [Ln(L)(H₂O)₂]_n, {H₃L=(HO)₂P(O)CH₂CO₂H; Ln=Dy³⁺ (CP 1 ), Er³⁺ (CP 2 )} and [{Gd₂(L)₂(H₂O)₃}^.H₂O]_n, (CP 3 ) were hydrothermally synthesized using phosphonoacetic acid as a linker. Structural features revealed that the dinuclear Ln³⁺ nodes were present in the 2D sheet of CP 1 and CP 2 while in the case of CP 3 , nodes were further connected to each other forming a chain‐type arrangement throughout the network. The magnetic studies show field‐induced slow magnetic relaxation property in CP 1 and CP 2 with U_eff values of 72 K (relaxation time, τ₀=3.05×10^?7 s) and 38.42 K (relaxation time, τ₀=4.60×10^?8 s) respectively. Ab‐initio calculations suggest that the g tensor of Kramers doublet of the lanthanide ion (Dy³⁺ and Er³⁺) is strongly axial in nature which reflects in the slow magnetic relaxation behavior of both CPs. CP 3 exhibits a significant magnetocaloric effect with ?ΔS_m=49.29 J kg^?1 K^?1, one of the highest value among the reported 2D CPs. Moreover, impedance analysis of all the CPs show high proton conductivity with values of 1.13×10^?6 S cm^?1, 2.73×10^?3 S cm^?1 and 2, 6.27×10^?6 S cm^?1 for CPs 1 – 3 , respectively, at high temperature (>75 °C) and maximum 95 % relative humidity (RH).     

Chemical constituents of Fumaria densiflora and the effects of some isolated spirobenzylisoquinoline alkaloids on murine isolated ileum and perfused heart

Abstract

Twenty-two alkaloids, were isolated from Fumaria densiflora. Two of these alkaloids, N-methyl-5-hydroxystylopine chloride and fumaricine N-oxide, were isolated for the first time from natural sources. Parfumine and fumaritine, in concentrations ranging from 3?×?10^?7 to 9?×?10^?4?M, caused concentration–dependent relaxation of ileum longitudinal segment. Also, parfumine and fumaritine in concentrations ranging from 3?×?10^?4 to 9?×?10^?2?M, caused concentration – dependent decrease in heart rate of the isolated perfused heart. A concentration of parfumine of 3?×?10^?2?M increased but a higher concentration (9?×?10^?2?M) decreased the amplitude of contraction of the isolated perfused heart. On the other hand, fumaritine, in concentrations ranging from 3?×?10^?4 to 3?×?10^?2?M, caused concentration – dependent increase, but a higher concentration (9?×?10^?2?M) caused a decrease in the amplitude of contraction of the isolated perfused heart.

     

Acute kidney injury caused by the intraperitoneal injection of Bothrops jararaca venom in rats

Abstract

We examined the ability of Bothrops jararaca venom (12.5?mg/kg) injected intraperitoneally (i.p.) to cause acute kidney injury (AKI) in rats. Blood urea and creatinine (AKI biomarkers, in g dL^?1) were elevated after 2?h in venom-treated rats (urea: from 0.41?±?0.1 to 0.7?±?0.03; creatinine from 46.7?±?3.1 to 85?±?6.7; p?<?0.05; n?=?3 each), with no change in circulating reduced glutathione. Venom-treated rats survived for ～6?h, at which point platelets were reduced (×10³ µL^?1; from 763.8?±?30.2 to 52.5?±?18.2) whereas leukocytes and erythrocytes were slightly increased (from 4.7?±?0.3 to 6.6?±?0.1?×?10³?µL^?1 and from 8.38?±?0.1 to 9.2?±?0.09?×?10⁶?µL^?1, respectively; p?<?0.05); blood protein (5.2?±?0.4?g dL^?1) and albumin (2.7?±?0.1?g dL^?1) were normal, whereas blood and urinary urea and creatinine were increased. All parameters returned to normal with antivenom given 2?h post-envenomation. The i.p. injection of venom caused AKI similar to that seen with other routes of administration.     

Thermometric Studies of Multi-Valent Metal Complexes

Thermometric titrations of lanthanum perchlorate, titanium (III)-chloride, uranium (IV)-sulfate, and uranyl sulfate with EDTA solutions were carried out by using a Keithley nanovoltmeter with a rhodium-platinum thermocouple at 25°±0.01°. The formation of LaY^?, TiY^?, U(IV)Y and UO₂HY^? ions was confirmed. The heat of reaction for the system, Ti(III)+H₂Y^2? = TiY^?+2H⁺, was given by δH₁ = 1.933-1.422×10 m +2.056×10⁴m (in cal) and the limiting value was evaluated to be δH°₁ = 1.9 kcal mol^?1 at 25°C.     

Theoretical study of electron transfer in uranyl(VI)–uranyl(V) complexes in solution

The rates of the electron self‐exchange between uranyl(VI) and uranyl(V) complexes in solution have been investigated in detail with quantum chemical methods. The calculations have shown that the bond length of U? Oyl is elongated by 0.1 Å when the extra electron is localized on the sites. The diabatic potential surfaces are obtained. The inner reorganization energies are 212.6 and 226.8 kJ mol^?1 for hydroxide and fluoride bridge systems, respectively. The solvent reorganization energies are 28.12 and 31.60 kJ mol^?1 for hydroxide and fluoride bridge systems, respectively. The nuclear frequency factors are 3.17 × 10¹³ and 3.12 × 10¹³ s^?1 for hydroxide and fluoride bridge systems, respectively. The electronic coupling matrix elements are 1.89 and 4.06 kJ mol^?1 for hydroxide and fluoride bridge systems, respectively. The electron‐transfer rates of our calculations are 12.95 and 0.819 M^?1 s^?1 for hydroxide and fluoride bridge systems, respectively. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Carbon dots-enhanced luminol chemiluminescence and its application to 2-methoxyestradiol determination

In this study, the fluorescent carbon dots (CDs) of good biocompatibility and low toxicity was prepared by a carbonation route, and a strong enhancement effect of CDs on the luminol-K₃Fe(CN)₆ chemiluminescence (CL) system was observed. 5?±?1?nm CDs were used as catalysts to enhance the reaction sensitivity. In the presence of 2-methoxyestradiol (2-ME), the CL intensity of CDs-luminol-K₃Fe(CN)₆ was significantly inhibited. The relative CL intensity was linearly related to the 2-ME concentration in the range of 1.0?×?10^?9 –1.0?×?10^?7?g?mL^-1 with a lower detection limit of 4.1?×?10^?10?g?mL^?1. As a preliminary application, the highly sensitive method was successfully applied to the determination of 2-ME in both pharmaceutical preparation and serum samples with satisfactory results. The possible mechanism of CL reaction catalyzed by CDs was investigated and the CDs played a role of catalyst in the reaction which could promote the generation of oxygen radicals.

It could be concluded that the enhancement effect on CL by CDs was attributed to the formation of oxygen radicals. The oxidation reaction of luminol was accelerated by oxygen radicals, which led to the enhanced CL emission.     

Kinetic Studies of the Ligand Substitution Reaction of Some New Uranyl Schiff Base Complexes with Tri‐n‐butylphosphine

Kinetics of the substitution reaction of solvent molecule in uranyl(VI) Schiff base complexes by tri‐n‐butylposphine as the entering nucleophile in acetonitrile at 10–40°C was studied spectrophotometrically. The second‐order rate constants for the substitution reaction of the solvent molecule were found to be (8.8 ± 0.5) × 10^?3, (5.3 ± 0.2) × 10^?3, (7.5 ± 0.3) × 10^?3, (6.1 ± 0.3) × 10^?3, (13.5 ± 1.6) × 10^?3, (13.2 ± 0.9) × 10^?3, (52.9 ± 0.2) × 10^?3, and (88.1 ± 0.6) × 10^?3 M^?1 s^?1 at 40°C for [UO₂(Schiff base)(CH₃CN)], where Schiff base = L1–L8, respectively. In a temperature dependence study, the activation parameters ΔH^# and ΔS^# for the reaction of uranyl complexes with PBu₃ were determined. From the linear rate dependence on the concentration of PBu₃, the span of k₂ values and the large negative values of the activation entropy, an associative (A) mechanism is deduced for the solvent substitution. By comparing the second‐order rate constants k_2, it was concluded that the steric and the electronic properties of the complexes were important for the rate of the reactions.     

A Sensitive Chemiluminescence Method for Cinchona Alkaloids

Abstract

Chemiluminescence (CL) was achieved by oxidation of sulphide with cerium(IV) in the presence of cinchona alkaloids (quinine, quinidine or cinchonine). The CL intensity was correlated with the concentration of each cinchona alkaloid. Based on this phenomenon, sensitive CL methods for these alkaloids were described. Quinine (4×10^?8～1×10^?4 g/ml), quinidine (1×10^?7 ～ 1×10^?3 g/ml) and cinchonine (1×10^?6 ～ 8×10^?4 g/ml) could be determined with detection limits of 1×10^?8 g/ml, 4×10^?8 g/ml and 6×10^?7 g/ml, respectively.     

A theoretical approach for the acylation/deacylation mechanisms of avibactam in the reversible inhibition of KPC-2

Klebsiella pneumoniae carbapenemase (KPC-2) is the most commonly encountered class A β-lactamase variant worldwide, which confer high-level resistance to most available antibiotics. In this article we address the issue by a combined approach involving molecular dynamics simulations and hybrid quantum mechanics/molecular mechanics calculations. The study contributes to improve the understanding, at molecular level, of the acylation and deacylation stages of avibactam involved in the inhibition of KPC-2. The results show that both mechanisms, acylation and deacylation, the reaction occur via the formation of a tetrahedral intermediate. The formation of this intermediate corresponds to the rate limiting stage. The activation barriers are 19.5 kcal/mol and 23.0 kcal/mol for the acylation and deacylation stages, respectively. The associated rate constants calculated, using the Eyring equation, are 1.2?×?10^?1 and 3.9?×?10^?4 (s^?1). These values allow estimating a value of 3.3?×?10^?3 for the inhibition constant, in good agreement with the experimental value.

     

Adsorptive stripping voltammetry of nickel at a bare glassy carbon electrode

A bare glassy carbon electrode is applied to nickel determination by adsorptive stripping voltammetry in the presence of dimethylglyoxime as a complexing agent. A procedure of nickel determination and electrode regeneration was proposed. The calibration graph for Ni(II) for an accumulation time of 120?s was linear from 2?×?10^?9 to 1?×?10^?7?mol?L^?1. The detection limit was 8.2?×?10^?10?mol?L^?1. The relative standard deviation for a solution containing 2?×?10^?8?mol?L^?1 of Ni(II) was 4.1%. The proposed procedure was applied for Ni(II) determination in certified water reference materials.     

Flow injection determination of hydrogen peroxide using diperiodatoargentate- and diperiodatonickelate-luminol chemiluminescence

A novel chemiluminescence (CL) method for the determination of hydrogen peroxide is described. Method is based on the transition metals in highest oxidation state complex, which include diperiodatoargentate (DPA) and diperiodatonickelate (DPN) and show excellent sensitisation on the luminol-H₂O₂ CL reaction with low luminol concentration in alkaline medium. In particular, the sensitiser which was previously reported (such as Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Cr³⁺, KIO₄, K₃Fe(CN)₆ etc.) to be unobserved CL due to poor sensitisation with such low concentration of luminol which makes the method hold high selectivity. Based on this observation, the detection limits were 6.5?×?10^?9?mol?L^?1 and 1.1?×?10^?8?mol?L^?1 hydrogen peroxide for the DPN- and DPA-luminol CL systems, respectively. The relative CL intensity was linear with the hydrogen peroxide concentration in the range of 2.0?×?10^?8–6.0?×?10^?6?mol?L^?1 and 4.0?×?10^?8–4.0?×?10^?6?mol?L^?1 for the DPN- and DPA-luminol CL systems, respectively. The proposed method had good reproducibility with a relative standard deviation of 3.4% (8.0?×?10^?7?mol?L^?1, n?=?7) and 1.0% (2.0?×?10^?6?mol?L^?1, n?=?7) for the DPN- and DPA-luminol CL systems, respectively. A satisfactory result has been gained for the determination of H₂O₂ in rainwater and artificial lake water by use of the proposed method.     

Potentiometric sensors based on organic ion exchangers for determining tetraalkylammonium salts

Potentiometric sensors with plasticized polymer membranes based on organic ion exchangers, tetraalkylammonium dodecyl sulfates (benzyldimethyldodecylammonium, benzyldimethyltetradecylammonium, dimethyldistearylammonium), have been proposed for the determination of quaternary ammonium salts in model solutions and KATAPAV technical solutions. The thermal stability, composition, and solubility product have been estimated. It has been shown that ion associates are stable to 60?C70°C, K _S varies in the range from 2 × 10^?8 to 5 × 10^?10. The basic electrochemical parameters of the sensors have been determined as well, such as linearity ranges of the electrode function (5 × 10^?5 (5 × 10^?6)?1 × 10^?2 (1 × 10^?3) M) and slopes of the electrode functions (47?C59 mV/pc), response time (60?C90 sec), potential drift (2?C3 mV/day), operation period (3?C4 months), limits of detection for tetramethylammonium salts (1 × 10^?5?4 × 10^?7 M).     

Use of samarium (III) acetate as initiator in ring-opening polymerization of trimethylene carbonate

Abstract

In this work was evaluated the activity of samarium acetate (III) (Sm(OAc)₃) as a possible initiator in the polymerization by ring opening of trimethylene carbonate (TMC). All polymerizations were carried out under solvent-free melt conditions in ampoules-like flasks, equipped with a magnetic stirrer. The effects of different parameters of reaction, such as molar ratio monomer to initiator, temperature and reaction time, on typical variables of polymers, e.g., conversion of TMC to poly(trimethylene carbonate) (PTMC), dispersity and molar mass, were analyzed. The molar ratio of monomer to initiator was varied between 0 and 1000?mol/mol and the temperature among 70 and 150?°C. Nuclear Magnetic Resonance (¹H-NMR and HMBC) and Size Exclusion Chromatography (SEC) were used to characterize the polymers. The results indicate that the Sm(OAc)₃ induces the polymerization of TMC to high conversion with number-average molecular weights of 3.11?×?10³ to 38.40?×?10³?Da. Based on the ¹H-NMR end-group analysis of low-molecular-weight PTMC, it was proposed a coordination–insertion mechanism for the polymerization, with a breakdown of the acyl-oxygen bond of the TMC. In according to the kinetic study carried out, the polymerization rate is first-order with respect to monomer concentration with apparent rate constants of k_ap?=?7.02?×?10^?4?mol?×?L^?1?×?h^?1.     

Direct Electroanalytical Determination of Fluvastatin in a Pharmaceutical Dosage Form: Batch and Flow Analysis

Abstract

The reduction of luvastatin (FLV) at a hanging mercury-drop electrode (HMDE) was studied by square-wave adsorptive-stripping voltammetry (SWAdSV). FLV can be accumulated and reduced at the electrode, with a maximum peak current intensity at a potential of approximately ?1.26 V vs. AgCl/Ag, in an aqueous electrolyte solution of pH 5.25. The method shows linearity between peak current intensity and FLV concentration between 1.0 × 10^?8 and 2.7 × 10^?6 mol L^?1. Limits of detection (LOD) and quantification (LOQ) were found to be 9.9 × 10^?9 mol L^?1 and 3.3 × 10^?8 mol L^?1, respectively.

Furthermore, FLV oxidation at a glassy carbon electrode surface was used for its hydrodynamic monitoring by amperometric detection in a flow-injection system. The amperometric signal was linear with FLV concentration over the range 1.0 × 10^?6 to 1.0 × 10^?5 mol L^?1, with an LOD of 2.4 × 10^?7 mol L^?1 and an LOQ of 8.0 × 10^?7 mol L^?1. A sample rate of 50 injections per hour was achieved.

Both methods were validated and showed to be precise and accurate, being satisfactorily applied to the determination of FLV in a commercial pharmaceutical.     

Determination of Benzoyl Peroxide Levels in Wheat Flour and Pharmaceutical Preparations by Differential Pulse Voltammetry in Nonaqueous Media

Abstract

Benzoyl peroxide (BP) was determined by differential pulse voltammetry (DPV) using a glassy carbon electrode in a dichloromethane‐acetic acid (1.5×10^?2 mol l^?1) solution and tetrabutyl ammonium perchlorate (0.01 mol l^?1) as the supporting electrolyte. The peak potential was ?0.045 V (vs. Ag/AgCl). There was a good linear relationship between the peak current and the benzoyl peroxide concentration in the range of 2.5×10^?6–1.0×10^?4 mol l^?1. The detection limit of the method was 2.5×10^?7 mol l^?1. The recovery was 94.8–106.0%. The samples of wheat flour and the pharmaceutical preparations for the treatment of acne vulgaris were directly detected with desired results. The reaction mechanism of benzoyl peroxide on the electrode was also discussed, which was two electrons and two protons irreversible reaction.     

Novel Polymeric Membrane Sensors Based on Mn(III) Porphyrin and Co(II) Phthalocyanine Ionophores for Batch and Flow Injection Determination of Azide

Two novel potentiometric azide membrane sensors based on the use of manganese(III)porphyrin [Mn(III)P] and cobalt(II)phthalocyanine [Co(II)Pc] ionophores dispersed in plasticized poly(vinyl chloride) PVC matrix membranes are described. Under batch mode of operation, [Mn(III)P] and [Co(II)Pc] based membrane sensors display near‐ and sub‐Nernstian responses of ?56.3 and ?48.5 mV decade^?1 over the concentration ranges 1.0×10^?2?2.2×10^?5 and 1.0×10^?2?5.1×10^?5 mol L^?1 azide and detection limits of 1.5×10^?5 and 2.5×10^?5 mol L^?1, respectively. Incorporation of both membrane sensors in flow‐through tubular cell offers sensitive detectors for flow injection (FIA) determination of azide. The intrinsic characteristics of the [Mn(III)P] and [Co(II)Pc] based detectors in a low dispersion manifold show calibration slopes of ?51.2 and ?33.5 mV decade^?1 for the concentration ranges of 1.0×10^?5?1.0×10^?2 and 1.0×10^?4?1.0×10^?2 mol L^?1 azide and the detection limits are1.0×10^?5 and 3.1×10^?5 mol L^?1, respectively. The detectors are used for determining azide at an input rate of 40–60 samples per hour. The responses of the sensors are stable within ±0.9 mV for at least 8 weeks and are pH independent in the range of 3.9?6.5. No interferences are caused by most common anions normally associated with azide ion.     

Electrochemical Responses and Sensitivities of Films Based on Multi-Walled Carbon Nanotubes in Aqueous Solutions

Novel films consisting of multi-walled carbon nanotubes (MWCNTs) were fabricated by means of chemical vapor deposition with decomposition of either acetonitrile (ACN) or benzene (BZ) using ferrocene as catalyst. The electrochemical responses of MWCNT-based films towards the ferrocyanide/ferricyanide, [Fe(CN)₆]^3?/4? redox couple were probed by means of cyclic voltammetry and electrochemical impedance spectroscopy at 25.0?±?0.5?°C. Both MWCNT-based films exhibit Nernstian response towards [Fe(CN)₆]^3?/4? with some slight kinetic differences. Namely, heterogeneous electron transfer rate constants lying in ranges of 2.69?×?10^?2?C1.7?×?10^?3 and 9.0?×?10^?3?C2.6?×?10^?3?cm·s^?1 were obtained at v?=?0.05?V·s^?1 for MWCNT_ACN and MWCNT_BZ, respectively. The detection limit of MWCNT_ACN, estimated to be about 4.70?×?10^?7?mol·L^?1 at v?=?0.05?V·s^?1, tends to become slightly poorer with the increase of the scan rate, namely at v?=?0.10?V·s^?1 the detection limit of 1.70?×?10^?6?mol·L^?1 was determined. Slightly poorer response ability was exhibited by MWCNT_BZ; specifically the detection limits of 1.57?×?10^?6 and 4.35?×?10^?6?mol·L^?1 were determined at v?=?0.05 and v?=?0.10?V·s^?1, respectively. The sensitivities of MWCNT_ACN and MWCNT_BZ towards [Fe(CN)₆]^3?/4? were determined as 1.60?×?10^?7 and 1.51?×?10^?7?A·L·mol^?1·cm^?2, respectively. The excellent electrochemical performance of MWCNT_ACN is attributed to the presence of incorporated nitrogen in the nanotube??s structure.