胶接体系的胶接强度、粘结能及损伤破坏研究

胶接是指一种用粘合剂实现连接和固持的方法,胶接形式的金属薄板在汽车工业,建筑业以及航空航天领域有着广泛的应用.论文采用有限元模拟方法,研究了该胶接体系在受载状态下的滑剪破坏行为,重点关注了胶层粘结能,搭接长度,胶层厚度对胶接接头承载能力的影响,同时初步探讨了胶层的界面损伤情况.胶层粘结能的提高能够显著提高接头的承载能力.此承载能力受搭接长度和胶层粘结能的共同影响,较大的粘结能情况下,提高搭接长度能够显著提高接头的承载能力.胶层厚度对接头的承载能力也存在影响,在论文考虑的厚度范围内,提高厚度能够增强接头的承载能力.最后初步考虑了接头在达到载荷峰值时刻的胶层损伤情况.     

Stress analysis of adhesively bonded sandwich pipe joints subjected to torsional loading

Composite pipes are becoming popular in the offshore oil and gas industry. These pipes are connected to one-another by various configurations of joints. The joints are usually the weakest link in the system. In this investigation we examine the response of various joint configurations subjected to torsion, one of the most common loading conditions in piping systems. Specifically, the theoretical analysis used to evaluate the stress field in the adhesive layers of tubular and socket type bonded sandwich lap joints is presented here. The two adherends of the joints may have different thickness and materials, and the adhesive layer may be flexible or brittle. The analysis is based on the general composite shell theory. The stress concentrations at and near the end of the joints as functions of various parameters, such as the overlap length, and thickness of the adhesive layer are studied. The effects of different adherend thickness ratios, adhesive thickness and overlap length are also studied. Results obtained from the proposed analytical solutions agree well with the results obtained from finite element analysis and those obtained by other workers.     

Balanced and unbalanced patching of cracked lap joints using weighted adhesive plate element

First order shear deformation theory is applied to analyze the behavior of one-side (unbalanced) and two-side (balanced) patched lap joints containing initial through cracks. The joints are made of adherends bonded together by adhesives. An adhesive interface plate element is introduced; it consists of an adhesive layer weighted by influence of the adherend. The thin adhesive layer is assumed to behave elastically and modelled as a simple tension-shear spring. The mathematical model contains layers of adherend and weighted adhesive layer.Finite elements are employed to model the adherend with an 8-node isoparametric plate element and interface layer with a 16-node plate element. Numerical results are obtained for one-side and two-side patches the width of which could be narrower or wider than the crack length. The former leads to bulging and possible peeling while the latter provides better bonding. Stresses and crack-tip stress intensity factors are calculated for different patch thickness. Effectiveness of the weighted adhesive layer model is exhibited by comparing the present results with those found in previous work where the adhesive is modelled as an individual layer.     

The strain energy release rates in adhesively bonded balanced and unbalanced specimens and lap joints

An analytical model is developed to determine the strain energy release rate in adhesive joints of various configurations such as the double-cantilever beam and single-lap joints. The model is based on asymptotic analysis of adhesive layer stresses and Irwin’s crack closure integral. Closed-form solutions are presented for balanced and unbalanced joints under mode I, II and mixed-mode I/II that take into account the influence of the shear force on the adhesive stresses, and its influence on the strain energy release rate. The accuracy of the model is tested against the classical beam theory expressions for double-cantilever beam and end-notch flexure specimens. In fact, classical beam theory’s expressions are found to be the lower bound of the proposed model solutions, and the two methods converge as the adhesive layer thickness decreases. Analysis of single-lap joints reveals the influence of edge shear forces on the total strain energy release rate, and more importantly on the ratio between modes I and II. Results from the proposed analytical model are in good agreement with finite element results and with analytical models found in the literature.     

Finite Fracture Mechanics model for mixed mode fracture in adhesive joints

Up to now the failure load assessment of bonded joints is still not fully understood. This work provides a new approach for assessing the crack initiation load of bonded joints. A failure model for single lap joints is proposed that is based on Finite Fracture Mechanics. Only two basic fracture parameters are required: the tensile strength and the fracture toughness of the adhesive. A coupled stress and energy criterion proposed in 2002 by Leguillon is used to model crack initiation in the adhesive layer. The theory of this criterion is outlined in detail, its relationship to other failure criteria is discussed and an overview of applications found in literature is given. An enhanced weak interface model that predicts a linear variation of the shear stresses in the adhesive layer is utilized to model the single lap joint. To compare joint designs and to reveal the limitations of the given approach a dimensionless brittleness number for mixed-mode loading is proposed. Along with a detailed discussion of the results for exemplary joint designs a comparison to experimental results from literature is performed. The two necessary fracture parameters are each taken from standard test results published in literature. A good agreement of the failure load predictions with the experimental results is observed. A remarkable outcome is that the presented failure model renders the adhesive thickness effect correctly. The paper concludes with a discussion of the limitations of the approach and the effect of material parameters.     

Effects of adhesive thickness on global and local Mode-I interfacial fracture of bonded joints

The interfacial fracture of adhesively bonded structures is a critical issue for the extensive applications to a variety of modern industries. In the recent two decades, cohesive zone models (CZMs) have been receiving intensive attentions for fracture problems of adhesively bonded joints. Numerous global tests have been conducted to measure the interfacial toughness of adhesive joints. Limited local tests have also been conducted to determine the interface traction-separation laws in adhesive joints. However, very few studies focused on the local test of effects of adhesive thickness on the interfacial traction-separation laws. Interfacial toughness and interfacial strength, as two critical parameters in an interfacial traction-separation law, have important effect on the fracture behaviors of bonded joints. In this work, the global and local tests are employed to investigate the effect of adhesive thickness on interfacial energy release rate, interfacial strength, and shapes of the interfacial traction-separation laws. Basically, the measured laws in this work reflect the equivalent and lumped interfacial fracture behaviors which include the cohesive fracture, damage and plasticity. The experimentally determined interfacial traction-separation laws may provide valuable baseline data for the parameter calibrations in numerical models. The current experimental results may also facilitate the understanding of adhesive thickness-dependent interface fracture of bonded joints.     

单搭接胶接接头拉伸剪切性能的数值模拟与实验研究

采用数值模拟和光测技术对单向拉伸载荷作用下单搭接胶接接头中的剪切性能进行分析,研究了不同厚度胶层中切应力的变化规律。用有限元方法(FEM)对不同胶层厚度的试件进行建模,得到了拉伸载荷下胶粘剂中的切应力分布及其统计参数。利用数字图像相关(digitalimage correlation,DIC)方法对试件的变形场进行测量。结果表明,当胶粘剂的厚度较小时,胶粘剂中的切应力的分布统计参数随着其厚度的增加会有显著的变化,但是当厚度超过一定的数值时,统计参数对厚度的变化不再敏感。     

复合材料层合板单搭胶接力学性能检测技术与分析

胶接工艺缺陷对单搭胶接接头的拉伸剪切性能有着重要的影响。为了研究不同单搭接胶接层厚度对不同材质复合材料层合板胶接性能的影响规律,通过喷水穿透法超声C扫描对试样的剪切区域进行无损检测,并分别采用1mm、2mm、4mm的胶层厚度,以碳纤维/玻璃纤维复合材料层合板为被粘物,进行单搭胶接拉伸剪切性能试验。检测及试验结果表明:当胶层厚度h1mm时,对于相同材料的被粘物,胶层厚度越大,试件胶接接头剪切强度越小;相同的粘接剂厚度,以碳纤维增强复合材料板为被粘物的试件胶接接头剪切强度大于以玻纤增强复合材料板为被粘物的试件胶接接头强度;胶粘剂与碳纤维被粘物表面的润湿效果要优于胶粘剂与玻纤被粘物表面的润湿效果。     

EXPERIMENTAL INVESTIGATIONS OF STRENGTH,TOUGHNESS AND FAILURE MECHANISM OF THE METAL/EPOXY/METAL ADHESIVE SYSTEM

本文系统地开展了金属/环氧/金属胶结体系的强韧机理及失效行为实验研究,针对铝合金圆棒与铝合金圆棒通过环氧树脂胶层的各种斜截面方向粘结,实验观测了该体系的拉伸变形和失效行为,测量了界面失效载荷对胶层厚度和粘结界面倾斜角的依赖关系;通过引入胶结界面平均正应力、平均剪应力、平均正应变、平均剪应变等概念,可对界面失效强度进行测量,获得界面强度与界面粘结角度以及胶层厚度的关系,进而获得了铝合金/环氧胶层/铝合金体系的强度失效面以及胶结界面的断裂能和胶结体系的能量释放率.上述研究结果为深入认识金属胶结体系的强韧性能和失效机制提供了科学依据,对金属胶结体系的优化设计和性能评判具有重要指导意义.研究结果表明,铝合金/环氧胶层/铝合金体系的拉伸失效总体呈弹脆性破坏特征,失效表现为胶层粘结界面的断裂,失效强度和界面断裂能在胶层厚度为百微米量级时表现出强烈的尺度效应：界面粘结强度随着胶层厚度的减小而显著增大,临界状态的平均正应力和平均剪应力在强度破坏面上近似位于同一圆上,界面断裂能随着胶层厚度的减小而显著减小;与此同时,界面失效强度和界面断裂能也密切依赖于界面粘结角度.     

On flaw size and distribution in lap joints

By using adhesive as the bonding substance between metals or polymeric materials, simple structural joints can be made to bear relatively high loads. Applications have increasingly been made in substituting adhesive joints for conventional mechanical fastenings, especially in the aircraft and aerospace industries where weight is a predominant factor. In order to design a most effective adhesive-bonded joint, an understanding of the stress distribution along the joint is as important as the physical properties of the bonding agent. One of the most common and widely used adhesive joints is the single lap joint.Recent investigations using various analytical models have revealed that the cause of failure in an idealized ‘defect free’ lap joint is primarily due to the localized effect of high stress concentration at the lap ends. With the presence of flaw like defects in the adhesive layer, the load transfer from adherend to adhesive is expected to be different from the idealized joint. In addition, localized stress concentrations induced by irregular adhesive defects that may be found in practical engineering applications can further reduce fracture strength of such an imperfect joint.This paper is intended to describe an investigation into the effect of internal adhesive flaw size and distribution on the fracture behaviour of adhesive-bonded lap joints. The finite element method is used to gain a quantitative understanding of the localized shear stress distributions due to the presence of the internal flaws along the bonding layer. It is observed that the reduction in the fracture strength is relatively small when a flaw is located in the central portion of the bonding length. However, a flaw located near the lap ends of the adhesive joint can cause marked reduction in the fracture strength, due to its interaction with the high stress concentration at the lap ends.     

Pressure-sensitive ductile layers – I. Modeling the growth of extensive damage

Polymeric adhesives sandwiched between two elastic substrates are commonly found in multi-layers and IC packages. The non-elastic deformation and flow stress of such adhesive joints are highly pressure-sensitive. In this work, we study the effects of pressure-sensitivity, α, and plastic dilatancy, β, on void growth and coalescence ahead of a crack in ductile adhesive joints. To this end, a single layer of discrete voids is placed ahead of the crack in a pressure-sensitive dilatant adhesive sandwiched between two elastic substrates. The adhesive joint is subjected to small-scale yielding conditions. Using an associated flow rule (α = β), we show that pressure-sensitivity not only intensifies damage levels but also increases its spatial extent several fold. The damage level as well as its spatial extent is found to be even greater when a non-associated flow rule (β < α) is deployed. A reduction in the damage process zone’s thickness further increases the voiding activity in the adhesive, thereby resulting in brittle-like failure. This work also examines the fracture toughness trends using a material failure criterion for crack growth.     

Effects of thickness on the largely-deformed JKR (Johnson–Kendall–Roberts) test of soft elastic layers

The paper aimed to study the effect of large deformation and material nonlinearity on the adhesive contact between a smooth rigid spherical indenter and a Neo-Hookean layer of finite thickness, for the cases of the layer thickness/indenter radius ratio between 1 and 2. Our analysis was based on the large-deformation JKR (LDJKR) theory, which models the adhesive contact of two elastic solids in large-deformation regime by knowing the solution of the corresponding non-adhesive contact problem. In this paper, the non-adhesive contact between a spherical indenter and a Neo-Hookean layer was solved by finite element analysis. Combined these numerical results and the LDJKR theory, approximate analytic expressions of the applied load and displacement of adhesive contact of Neo-Hookean layers were obtained. The effects of layer thickness were also discussed.     

CFRP阶梯加固钢板端部胶层应力的理论模型研究

CFRP阶梯加固可以有效减小CFRP端部胶层应力,防止胶层过早剥离而导致CFRP加固失效．文中通过理论推导建立CFRP阶梯加固钢板的端部胶层剪应力和正应力的理论模型,并采用有限元模型验证了理论模型,然后利用理论模型研究了加固参数对胶层应力的影响．研究结果表明：理论模型可以有效地计算端部胶层应力,且当阶梯端部长度超过“最小端部长度”时,理论模型可以准确计算端部胶层的最大应力值及其发生位置;利用理论模型便于分析各种参数对端部胶层应力的影响,其中胶层厚度、阶梯数量和CFRP厚度对端部胶层应力影响较大．     

Linear and higher order displacement theories for adhesively bonded lap joints

This work presents an adhesive model for stress analysis of bonded lap joints, which can be applied to model thin and thick adhesive layers. In this theory, linear variations of displacement components along the adhesive thickness are firstly assumed, and the longitudinal strain and the Poisson's effect of the adhesive are modeled. A differential form of the equilibrium equations for the adherends is analytically solved by means of compatible relations of the adhesive deformation. The derived shear and peel stresses are compared with the classical adhesive model of continuous springs with constant shear and peel stresses, and validated with two-dimensional finite element results of the geometrically nonlinear analysis using a commercial package. The numerical results show that the present linear displacement theory can be applied to both thin and moderately thick adhesive layers. The present formulation of the linear displacement theory is then extended to the higher order displacement theory for stress analysis of a thick adhesive, whose numerical results are also compared with those of the finite element computation.     

Peeling experiments of ductile thin films along ceramic substrates – Critical assessment of analytical models

Two types of peeling experiments are performed in the present research. One is for the Al film/Al₂O₃ substrate system with an adhesive layer between the film and the substrate. The other one is for the Cu film/Al₂O₃ substrate system without adhesive layer between the film and the substrate, and the Cu films are electroplated onto the Al₂O₃ substrates. For the case with adhesive layer, two kinds of adhesives are selected, which are all the mixtures of epoxy and polyimide with mass ratios 1:1.5 and 1:1, respectively. The relationships between energy release rate, the film thickness and the adhesive layer thickness are measured during the steady-state peeling process. The effects of the adhesive layer on the energy release rate are analyzed. Using the experimental results, several analytical criteria for the steady-state peeling based on the bending model and on the two-dimensional finite element analysis model are critically assessed. Through assessment of analytical models, we find that the cohesive zone criterion based on the beam bend model is suitable for a weak interface strength case and it describes a macroscale fracture process zone case, while the two-dimensional finite element model is effective to both the strong interface and weak interface, and it describes a small-scale fracture process zone case.     

Stress-function variational method for interfacial stress analysis of adhesively bonded joints

High interfacial stresses at the free edges of adherends are responsible for the debonding failure of adhesively bonded joints (ABJs). In this paper, a general stress-function variational method is formulated to determinate the interfacial shear and normal (peeling) stresses in ABJs in high accuracy. By extending authors’ prior work in stress analysis of bonded joints (Wu and Jenson, 2011), all the planar stress components in the adherends and adhesive layer of an ABJ are expressed in terms of four unknown interfacial stress functions, which are introduced at the upper and lower surfaces of the adhesive layer. A set of governing ordinary differential equations (ODEs) of the four interfacial stress functions is obtained via minimizing the complimentary strain energy of the ABJ, which is further solved by using eigenfunctions. The obtained semi-analytic stress field can satisfy all the traction boundary conditions (BCs) of the ABJ, especially the stress continuity across the bonding lines and the shear-free condition at the ends of adherends and adhesive layer. As an example, the stress field in an adhesively single-sided strap joint is determined by the present method, whose numerical accuracy and reliability are validated by finite element method (FEM) and compared to existing models in the literature. Parameter studies are performed to examine the dependencies of the interfacial stresses of the exemplified ABJ upon the geometries, moduli and temperature change of the adherends and adhesive layer, respectively. The present method is applicable for scaling analysis of joint strength, optimal design of ABJs, etc.     

A three-parameter elastic foundation model for interface stresses in curved beams externally strengthened by a thin FRP plate

Externally bonding of fiber reinforced polymer (FRP) plates or sheets has become a popular method for strengthening reinforced concrete structures. Stresses along the FRP–concrete interface are of great importance to the effectiveness of this type of strengthening because high stress concentration along the FRP–concrete interface can lead to the FRP debonding from the concrete beam. In this study, we develop an analytical solution of interface stresses in a curved structural beam bonded with a thin plate. A novel three-parameter elastic foundation model is used to describe the behavior of the adhesive layer. This adhesive layer model is an extension of the two-parameter elastic foundation commonly used in existing studies. It assumes that the shear stress in the adhesive layer is constant through the thickness, and the interface normal stresses along two concrete/adhesive and adhesive/FRP interfaces are different. Closed-form solutions are obtained for these two interfacial normal stresses, shear stress within the adhesive layer, and beam forces. The validation of these solutions is confirmed by finite element analysis.     

Optimization of geometry of elastic bodies in the vicinity of singular points on the example of an adhesive lap joint

The stress state in adhesive lap joints with various geometric shapes of spew fillet is studied. It is noted that the applied design models of the considered problem include singular points at which infinite stress values are possible if one uses the linear elasticity theory to calculate the stress state. Based on the conclusions of the solution of the geometry optimization problem in the vicinity of the singular points of elastic bodies, variants of the geometry of spew fillet, which provide the most significant decrease in the concentration of stresses in adhesive lap joints, are proposed.     

Constraint effects in adhesive joint fracture

Constraint effects in adhesive joint fracture are investigated by modelling the adherents as well as a finite thickness adhesive layer in which a single row of cohesive zone elements representing the fracture process is embedded. Both the adhesive and the adherents are elastic-plastic with strain hardening. The bond toughness Γ (work per unit area) is equal to Γ₀+Γ_p, where Γ₀ is the intrinsic work of fracture associated with the embedded cohesive zone response and Γ_p is the extra contribution to the bond toughness arising from plastic dissipation and stored elastic energy within the adhesive layer. The parameters of the model are identified from experiments on two different adhesives exhibiting very different fracture properties. Most of the tests were performed using the wedge-peel test method for a variety of adhesives, adherents and wedge thicknesses. The model captures the constraint effects resulting from the change in Γ_p: (i) the plastic dissipation increases with increasing bond line thickness in the fully plastic regime and then decreases to reach a constant value for very thick adhesive layers; (ii) the plastic dissipation in the fully plastic regime increases drastically as the thickness of the adherent decreases. Finally, this model is used to assess a simpler approach which consists of simulating the full adhesive layer as a single row of cohesive elements.     

FRP-混凝土界面粘结行为的参数影响研究

FRP-混凝土界面的粘结性能对FRP加固混凝土结构力学行为和破坏模式有着重要影响。本文对表征FRP-混凝土界面粘结性能的三个重要参数(界面初始刚度、最大剪应力、界面破坏能)开展研究,通过13个单剪试件的试验考察了混凝土强度、胶层厚度和粘结长度等因素对界面粘结行为的影响,根据试验结果拟合了界面破坏能、最大剪切应力与胶层剪切刚度、混凝土强度之间的函数关系。在试验研究基础上,构建了外贴FRP-混凝土界面粘结的有限元模型。通过有限元分析考察了界面破坏能等三个参数不变的前提下,不同的局部粘结滑移本构关系对界面粘结行为的影响;进而研究了其中一个参数变化时引起的界面粘结性能改变。研究结果表明:界面粘结承载力随着胶层厚度增加而逐渐提高;胶层厚度与界面破坏能成正比,与峰值剪应力成反比;当界面破坏能等三个参数保持不变时,局部粘结滑移本构关系对FRP-混凝土界面粘结性能的影响较小;三个参数中的一个增大时将延缓界面破坏的过程。