Effect of sample preparation and preenrichment media on the recovery of Salmonella from cantaloupes, mangoes, and tomatoes

Studies were conducted to determine the relative effectiveness of buffered peptone water (BPW), lactose (LAC) broth, and Universal Preenrichment (UP) broth for the recovery of Salmonella organisms from fruit rinses, whole fruit, and comminuted fruit. In the first phase, the relative effectiveness of the rinse and soak methods for the recovery of Salmonella from surface-contaminated mangoes and tomatoes was examined. Fruits were spot inoculated with single Salmonella serovars and held for 4 days at 2-6 degrees C before analysis was initiated. The contaminated fruit was rinsed in portions of BPW, LAC broth, or UP broth. Portions from each rinse were added to its respective broth (e.g., BPW to BPW). Individual whole fruit, in their remaining broth rinses (soak method), and the fruit rinse/broths (rinse method) were incubated for 24 h at 35 degrees C. The Bacteriological Analytical Manual (BAM) Salmonella culture method was followed thereafter. The soak method produced significantly greater numbers (P < 0.05) of positive test portions than did the rinse method for the analysis of mangoes (93 versus 12) and tomatoes (85 versus 34). The 3 broths were comparable for the recovery of Salmonella for both the soak and the rinse methods for mangoes. For tomatoes, there were no significant differences among the broths for the soak method, but BPW and UP broth were significantly more productive (P < 0.05) than LAC broth by the rinse method. In the second phase, the relative effectiveness of LAC broth, BPW, and UP broth for the recovery of Salmonella from comminuted fruit was examined. Fruits were contaminated with single Salmonella serovars and aged for 4 days at 2-6 degrees C. Twenty 25 g test portions were preenriched in each of the following broths: BPW, LAC broth, and UP broth. The BAM Salmonella culture method was followed thereafter. For cantaloupes, significantly more (P < 0.05) Salmonella-positive test portions were recovered with UP broth (96 Salmonella-positive test portions) and BPW (87 Salmonella-positive test portions) than with LAC broth (57 Salmonella-positive test portions). For mangoes, BPW recovered an arithmetically larger number of Salmonella-positive test portions (27 Salmonella-positive test portions) than did either LAC broth (14 Salmonella-positive test portions) or UP broth (18 Salmonella-positive test portions). For tomatoes, there were no significant differences among the broths: BPW recovered 65 Salmonella-positive test portions, UP broth recovered 62 Salmonella-positive test portions, and LAC broth recovered 60 Salmonella-positive test portions. For the analysis of whole fruit, it is recommended that the soak method be used. For whole fruit analyzed with the soak method, UP broth should be used for tomatoes and BPW should be used for mangoes. It is further recommended that UP broth be used for the analysis of comminuted cantaloupes and that BPW be used for the analysis of comminuted mangoes and tomatoes.     

Enhanced recovery of Salmonella from apple cider and apple juice with universal preenrichment broth

A comparison was made of the relative efficiencies of Universal Preenrichment (UP) broth and lactose broth for the recovery of a variety of Salmonella serovars from pasteurized and unpasteurized apple cider and pasteurized apple juice. Bulk portions of juice were contaminated with single Salmonella serovars at high and low levels of 0.4 and 0.04 CFU/mL, respectively. The juice was aged for a minimum of 5 days at 2-5 degrees C. On the day analysis was initiated, each of 20 test portions (25 mL) of the contaminated juice was preenriched in UP broth and in lactose broth. The Bacteriological Analytical Manual Salmonella culture method was followed thereafter. For pasteurized apple cider, UP broth recovered significantly (p < 0.05) more Salmonella-positive test portions than did lactose broth (112 and 75, respectively). For unpasteurized apple cider, UP broth recovered significantly more Salmonella-positive test portions than did lactose broth (326 and 221, respectively). For pasteurized apple juice, UP broth recovered more Salmonella-positive test portions than did lactose broth (93 and 81, respectively). However, this difference was not statistically significant. These results indicate that UP broth should replace lactose broth for the analysis of pasteurized and unpasteurized apple cider and pasteurized apple juice.     

Evaluation of culture media for selective enrichment and isolation of Salmonella in seafood

Seafood, including fish, shrimp, clam, crab, mussel, oyster, lobster, squid, octopus, and cuttlefish samples, was used to compare the recovery of Salmonella serovars by different selective enrichment and isolation media. The samples were selectively enriched in Rappaport-Vassiliadis (RV) broth and tetrathionate broth (TT), followed by selective isolation on Hektoen enteric (HE) agar, xylose lysine desoxycholate (XLD) agar, bismuth sulfite (BS) agar, and Brilliant Green (BG) agar media. Of 443 seafood samples analyzed, 108 were found to be contaminated with Salmonella. The role of selective enrichment in Salmonella spp. recovery with RV medium was distinctly high (70%) compared to TT broth (30%). The selective enrichment in RV broth followed by selective isolation on XLD, HE, BS, and BG agar recovered Salmonella at levels of 56, 41, 28, and 16%, respectively. Similarly, after enrichment in TT broth, XLD and HE agars recovered 27 and 23% respectively. The recovery of Salmonella with enrichment in TT followed by isolation on BS and BG was abysmally low at 4.6 and 5%, respectively. There was no significant difference (P > 0.05) in the recovery of Salmonella using the combinations of XLD and HE media with selective enrichment in RV broth. However, performance difference (P < 0.05) was observed in the recovery when BS and BG with RV, and XLD, HE, BS, and BG agars with TT broth were used. The present study showed that the combination of RV with XLD was the most efficient media for isolation of Salmonella from seafood when compared to other isolation media combinations.     

Overexpression,Purification and Validation of Antigenic Salmonella enterica Serovar Typhi Proteins Identified from LC-MS/MS

In our earlier study, an immunoblot analysis using sera from febrile patients revealed that a 50-kDa band from an outer membrane protein fraction of Salmonella enterica serovar Typhi was specifically recognized only by typhoid sera and not sera from other febrile illnesses. Here, we investigated the identities of the proteins contained in the immunogenic 50-kDa band to pinpoint antigens responsible for its immunogenicity. We first used LC-MS/MS for protein identification, then used the online tool ANTIGENpro for antigenicity prediction and produced recombinant proteins of the lead antigens for validation in an enzyme-linked immunosorbent assay (ELISA). We found that proteins TolC, GlpK and SucB were specific to typhoid sera but react to antibodies differently under native and denatured conditions. This difference suggests the presence of linear and conformational epitopes on these proteins.     

The effect of dark recovery time on the photoefficiency of heterogeneous photocatalysis by TiO2 suspended in non-aqueous media

Variation of dark recovery time influences the efficiency of a heterogeneous photocatalytic oxidation on irradiated TiO₂ particles suspended in non-aqueous media, but does not affect the efficiency of a parallel photocatalyzed reduction. The efficiency of the photocatalyzed oxidation of 1-octanol on Degusa P-25 TiO₂ in oxygenated acetonitrile nearly doubled when the dark interval between excitation pulses was increased from 0.1 s to 1 s. No improvement in photoefficiency could be detected in the photocatalytic reduction of p-nitroacetophenone under the same conditions.     

Removal,recovery and enrichment of metals from aqueous solutions using carbon nanotubes

Environmental pollution caused by toxic metals (heavy metals, radioactive metals, etc.) is one of the major global issues, thus removal of toxic metals from contaminated water seems to be particularly important. On the other hand, the recovery and enrichment of metals, especially noble metals, from waste water is also crucial. To address these issues, nanotechnology plays an essential role in environmental monitoring and pollution control. To remove metals from contaminated water, or enrich metals from waste water, carbon nanotubes (CNTs) and their composites have attracted great attention due to their excellent adsorption performance. The removal efficiency for metal ions by CNTs was observed aroud 10–80 %, which could be improved to approach 100 % by selectively functionalizing CNTs with organic ligands. Herein, we review the applications of CNTs in treatment of toxic metal-containing wastewater for environmental monitoring and metals recovery. Due to their higher sensitivity and selectivity towards the enrichment of metals or detection of toxic metal pollution of the environment, and the latest research progress of using CNT composites for metal treatment is also discussed.     

Novel reversible biotinylated probe for the selective enrichment of phosphorylated peptides from complex mixtures

To improve the detection of phosphorylated peptides/proteins, we developed a novel protocol that involves the chemical derivatization of phosphate groups with a chemically engineered biotinylated-tag (biotin-tag), possessing three functional domains; a biotin group for binding to avidin, a base-labile 4-carboxy fluorenyl methoxycarbonyl (4-carboxy Fmoc) group, and a nucleophilic sulfhydryl moiety on the side-chain of cysteine. Using this approach, the derivatized, enzymatically digested peptides were selectively separated from unrelated sequences and impurities on immobilized avidin. Unlike previously published phosphopeptide enrichment procedures, this approach upon treatment with mild base liberates a covalently bound Gly-Cys analog of the peptide(s) of interest, exhibiting improved RP-HPLC retention and MS ionization properties compared with the precursor phosphopeptide sequence. The results obtained for a model peptide Akt-1 and two protein digests, demonstrated that the method is highly specific and allows selective enrichment of phosphorylated peptides at low concentrations of fmol/microL.     

Evaluation of TA10 broth for recovery of heat- and freeze-injured Salmonella from beef

The Bacteriological Analytical Manual (BAM) Salmonella pre-enrichment broth [lactose (LAC) broth], buffered peptone water, and universal pre-enrichment (UP) broth were compared with TA10 broth, developed in our laboratory, for recovery of heat- and freeze-injured Salmonella (55 degrees C for 2-20 min and -20 degrees C for 2 months, respectively) from beef. Beef samples were contaminated with single Salmonella serovars, and contamination levels of 0.44 to <0.001 most probable number (MPN)/g and 0.74 to 0.14 MPN/g were used for heat- and freezing-induced injury studies, respectively. Twenty test portions (25 g) of the contaminated beef were pre-enriched in each broth, and the BAM Salmonella culture method was used thereafter. There was a significant difference (chi2 = 7.73) in recovery of heat-injured Salmonella between TA10 broth and LAC broth, 189 (67.5%) versus 156 (55.7%) positive samples, respectively, determined by plating onto selective agars and identification by biochemical tests. For the recovery of freeze-injured Salmonella, there was a significant difference (chi2 = 24.7) between TA10 and LAC broth, 189 (72.7%) versus 133 (51.2%) positive samples, respectively. TA10 broth was more effective than LAC broth and UP broth for recovery of freeze-injured Salmonella. The results indicate that TA10 broth should be used instead of LAC broth for testing of beef that may be contaminated with heat- and freeze-injured Salmonella spp.     

The efficiency of alkaline extraction for the recovery of hexavalent chromium (CrVI) from paint samples and the effect of sample storage on CrVI recovery

Workplace exposures to CrVI, a human carcinogen, are significant in spraying operations of chromate-containing paints. Accurate determination of CrVI in paint aerosol air samples is important in assessing a worker's exposure to CrVI. National Institute for Occupational Safety and Health method 7604 is widely used for determining CrVI in air samples. It utilizes an alkaline extraction procedure. It was historically validated for paint aerosol samples containing 24.5 to 61.5 microg of CrVI. The literature documented potential airborne CrVI exposures greater than 61.5 microg in recent paint spraying operations. The efficiency of the alkaline method at extracting CrVI from paint samples containing 250 to 3000 microg of CrVI was determined. Paint was prepared, sampled, extracted twice and then digested. Extracts were analyzed for CrVI and digestates of the residual Cr were analyzed for total Cr. Alkaline extraction of paint samples using NIOSH method 7604 resulted in quantitative recoveries for paint samples with CrVI filter loadings from 250 to 3000 microg. A decrease in CrVI extraction efficiency was observed in samples containing > 1000 microg of CrVI. A second extraction improved the recovery of CrVI in these samples. Refrigerating paint aerosol samples for up to 2 weeks did not affect their CrVI content.     

Quantitative recovery of Listeria monocytogenes and select salmonella serotypes from environmental sample media

Environmental sampling has become increasingly important in the food industry for monitoring the presence of specific pathogens such as Listeria monocytogenes and Salmonella enterica. Several microbiological media are available for storage and transport of environmental samples from the processing plant to the test laboratory. In this study, we quantified the survival of L. monocytogenes, S. Typhimurium, S. Enteritidis, and S. Typhi in environmental sampling media over several time and temperature combinations to determine optimum conditions for transport and storage. A cocktail of L. monocytogenes strains and Salmonella serotypes was separately added to tubes of Dey-Engley (D/E) Neutralizing Broth, Copan SRK solution, and Neutralizing Buffer and incubated at either -4, 4, 10, or 15 degree C. Counts were made of the bacterial load after 0, 12, 24, and 48 h. Neutralizing Buffer and Copan SRK solution were best at maintaining bacterial concentrations at all temperatures. D/E Neutralizing Broth, at 10 and 15 degrees C, allowed significant bacterial growth. This study helped validate the use of these 3 media for environmental sample transport and storage at cold holding temperatures and demonstrated that, at elevated temperatures (>4 degrees C), it is preferable to use Neutralizing Buffer or Copan SRK solution for quantifying microbial recovery.     

介质环境对辣根国氧化物酶催化荧光反应体系的影响

探讨了缓冲溶液,溶剂和表面活性剂对对羟基苯丙酸-国氧化氢- 辣根国沿化区酶反应体系反应平衡及产物荧光性质的影响,表明二聚体荧光产物中存在酸碱平衡,应荧光滴定法求得其酸离解常数pK~a≈8.3.碱式产物的荧光强于酸式, 碱性环境使酶活性降低,反应平衡时间延长,阳离子胶束溴化十六烷基三甲胺(CTMAB) 和氯化十六烷基三甲铵(CTMAC)对该体系兼有催化和增敏作用,据此提出一种更为灵敏的测定辣根过氧化物酶的方法.     

The effect of physicochemical parameters on the separation recovery of plutonium and uranium from aqueous solutions by cation exchange

The effect of physicochemical parameters such as pH, salinity (e.g. [NaCl]) and competitive cation (e.g. Ca²⁺ and Fe³⁺) concentration on the separation recovery of plutonium and uranium from aqueous solutions by cation exchange has been investigated. The investigation was performed to evaluate the applicability of cation exchange as separation and pre-concentration method prior to the radiometric analysis of uranium and plutonium isotopes in natural water samples. Application of the method to test solutions of constant radionuclide concentration and variable composition (0.1, 0.5 and 1 M NaCl; 0.1 and 0.5 M Ca(NO₃)₂; 0.1 and 1 mM FeCl₃; 10) has generally shown that: (1) the optimum pH is 4.5 for uranium and plutonium, (2) increasing salinity results in slightly lower for uranium and significantly higher chemical recovery plutonium and (3) the presence of Ca(II) cations doesn’t significantly affect the chemical recovery of both radionuclides. Contrary, the presence of Fe(III) cations ([Fe(III)] > 0.1 mM) results in significantly lower chemical recovery for both radionuclides (<50%). The later is attributed to the formation of Fe(III) colloids, which present increased chemical affinity for uranium and plutonium and hence compete with the radionuclide binding by the resin. Nevertheless, the results indicate that the method could be successfully applied to a wide range of natural waters.     

Methods and techniques for the selective extraction and recovery of oxoanions

An important goal in environmental chemistry is the extraction of metals that are toxic or radioactive from soils and waters. For many such metals, the problem is solved by designing compounds with coordination sites that are specific for that particular metal. For cases such as oxoanions, however, where the inorganic center is already fully coordinated by oxygens, different strategies need to be used. Chromate, phosphate, selenate, pertechnetate, and aluminate are such anions. These species are problematic contaminants in soils and waters because they are either toxic, environmentally undesirable, or radioactive. Furthermore, under both acidic and basic conditions, the coordination positions of these oxoanions are occupied by oxygens. Chromium(VI) as either chromate or dichromate presents a particular problem because it is a strong oxidizing agent. In this review the different methods of extracting this group of pseudotetrahedral oxoanions are discussed, along with the individual advantages and limitations of each strategy.     

The effect of ammonium thiocyanate and sodium chloride on loss and recovery of mercury from water during storage

The effect of inorganic complexing agents such as thiocyanate and chloride on the stability of distilled water and natural waters spiked with 1 μg Hg l^-1 in polyethylene containers is reported. Distilled water solutions can be stored for several months without significant losses of mercury if they contain HNO₃(0.05–0.1 M) + NH₄SCN(0.001–0.01 M) or HNO₃(0.1 M) + NaCl(higher than 0.01 M). For river and pond waters, addition of HNO₃(0.1 M) + NH₄SCN(0.01 M) not only has a pronounced effect on preventing mercury losses, but also gives quantitative recoveries from spiked sample solutions from which mercury has been “lost”. Thiocyanate ion-favors desorption of mercury from solid phases; chloride is less effective in this respect.     

A benzoboroxole-functionalized monolithic column for the selective enrichment and separation of cis-diol containing biomolecules

A benzoboroxole-functionalized monolithic column was synthesized, which exhibited the best specificity and affinity towards cis-diol containing biomolecules as compared with the boronate affinity monolithic columns reported as well as significant secondary separation capability under acidic conditions.     

The effect of substituents and polymer media on photochromism kinetics of indolinospironaphthoxazine

The effect of substituents in indoline moiety and polymer media on photochromism and thermal decay processes of spirooxazine (ASP) was investigated. The thermal decoloration rate was decreased with increasing steric hindrance of substituents in l-position of indoline moiety. The stability of the colored forms was improved when the hydrogen in the 5-position of indoline moiety was replaced with electron-donating groups and was decreased when substituted by electron-withdrawing groups. In addition, the stability of the colored forms was related to properties of polymer media. The thermal decay rate decreased with an increase in the polarity and rigidity of polymer media. The themal decay kinetics of the colored forms obeyed biexponential decay law.     

Membrane retention of herbicides from single and multi-solute media: The effect of ionic environment

Results are reported for a systematic study on retention of three selected herbicides, in single solute or multi-solute feed-waters, by three commercial NF/ULPRO membranes, using stirred cells in the dead-end filtration mode. The effect of ionic environment on the retention of herbicides is also examined by controlling sodium and calcium concentration. The results are interpreted on the basis of the characteristic properties of herbicides and membranes used. In general, size exclusion seems to be the dominant mechanism for retention by NF/ULPRO membranes, especially in the case of membranes with a pore size similar to that of herbicide molecules. Tight and thus high-desalting membranes exhibit the best retention performance. On the other hand, the retention efficiency of relatively loose nanofiltration membranes also appears to be significantly influenced by adsorption of herbicides on the membrane. Filtration of feed-waters with more than one herbicide present results in different retentions (usually reduced) compared to those determined in single compound solutions. This is attributed to the competition between the herbicides for adsorption sites, which is directly related to membrane surface properties. Filtration experiments with saline solutions, mimicking real conditions (e.g. surface water), reveal the significant effect of divalent cations on herbicide retention, which, depending on the membrane type, can be either positive or negative. However, the effect of ionic strength, due to monovalent ions (NaCl), on herbicides retention appears to be rather minor.     

镉基体中微量锌的富集与分离研究

提出了一种用于富集分离镉基体中的微量锌的分离体系,研究了从镉基体中富集分离微量锌的可行性——采用二安替比林甲烷(DAM)作为络合剂,与硫氰酸铵、锌在盐酸介质中形成三元离子缔合物,用三氯甲烷作为萃取剂,最后用氨水作为反萃剂将有机相中的锌洗脱出来与镉分离。试验发现,当15%的硫氰酸铵用量为1.5mL,DAM的用量为1.5mL,加入20mL4mol/L的盐酸时,用20mL的三氯甲烷萃取两次,10mL1:3的氨水反萃两次,锌的回收率达到95%以上,相对误差小于0.5%。     

Separation and/or selective enrichment of single-walled carbon nanotubes based on their electronic properties

Single-walled carbon nanotubes (SWNTs) possess unique electronic properties that make them very promising materials for use in both nano-electronics and thin film devices. However, SWNTs are always produced as a mixture of metallic and semiconducting nanotubes, which is a major roadblock to their widespread application. This tutorial review provides a brief summary of ways of separating single-walled carbon nanotubes into metallic and semiconducting fractions. Various methods including selective growth, selective removal, selective adsorption and band structure modulation--all of which aim to produce pure SWNTs with well-defined electronic properties--are systematically discussed. The main problems in this field, the outlook for separation techniques and some views of future developments are presented.