Electronic and chemical properties of supported Au nanoparticles

Oxidation and reduction behaviors of Au nanoparticles with different sizes on highly ordered pyrolytic graphite (HOPG) and silica were studied using X-ray photoelectron spectroscopy (XPS). For Au nanoparticles smaller than 6 nm in diameter, we found a novel oxygen species formed in Au nanoparticles, which is absent in larger particles and Au bulk crystals. This new oxygen species is attributed to the subsurface oxygen: for a complete understanding of the structures of catalytically active Au, the new oxygen species should be taken into account. In this context, it is worth mentioning that the subsurface oxygen species has been suggested to play an important role in heterogeneous catalysis. With decreasing Au particle size, a positive core level shift can be observed, which can be mostly attributed to the final state effects. Increase of the number of undercoordinated atoms with decreasing particle size is evidenced by a reduced splitting between 5d_3/2 and 5d_5/2 states and a band narrowing. Our results on electronic structures of Au nanoparticles on silica are compared to those on other substrates such as zirconia and titania to shed light onto the metal-support interactions.     

Adsorption of carbon monoxide and oxygen on transition metal surfaces: A comparative study of the results from electron spectroscopy and theoretical calculations

Results of investigations on the adsorption of CO andO ₂ on transition metal surfaces by employinguv and x-ray photoelectron spectroscopy and electron energy loss spectroscopy (eels) are presented. Results of molecular orbital calculations on adsorbed CO and O₂ are also discussed. Some of the interesting aspects discussed are, satellites in the O(ls) region due to adsorbed CO, vibrationaleels of adsorbed O₂ and dissociation energy profiles of adsorbed O₂ on clean surfaces as well as surfaces covered with potassium or presorbed atomic oxygen. Contribution No 245 from the Solid State and Structural Chemistry Unit.     

Structural and magnetic properties of Zn1−xSbxCr2−x/3Se4 (x=0.11, 0.16 and 0.20) single crystals

Single crystals of Zn_1−xSb_xCr_2−x/3Se₄ based on the ZnCr₂Se₄ spinel, which is known to exhibit interesting magnetic and electronic transport properties, have been prepared by solid state reaction from the appropriate selenides. Three compounds of different Sb content (x=0.11, 0.16, and 0.20) were studied by X-ray diffraction, X-ray photoelectron scattering technique and macroscopic magnetic measurements with the aim to determine (i) stability of the cubic symmetry and (ii) influence of the Sb admixture on the magnetic properties. The results show that the Sb³⁺ and Zn²⁺ ions share the tetrahedral sites in the spinel structure, while the Cr³⁺ions carrying magnetic moments, are located in the octahedral sites. The X-ray photoelectron spectroscopy (XPS) data indicate that in this series of compounds the chromium ions have a 3d³ electronic configuration. The three samples studied order antiferromagnetically at low temperatures, with the magnetic characteristics being hardly altered with respect to those reported for the parent ZnCr₂Se₄ compound.     

A X-ray photoelectron spectroscopy study of HDTMAB distribution within organoclays

X-ray photoelectron spectroscopy (XPS) in combination with X-ray diffraction (XRD) and high-resolution thermogravimetric analysis (HRTG) has been used to investigate the surfactant distribution within the organoclays prepared at different surfactant concentrations. This study demonstrates that the surfactant distribution within the organoclays depends strongly on the surfactant loadings. In the organoclays prepared at relative low surfactant concentrations, the surfactant cations mainly locate in the clay interlayer, whereas the surfactants occupy both the clay interlayer space and the interparticle pores in the organoclays prepared at high surfactant concentrations. This is in accordance with the dramatic pore volume decrease of organoclays compared to those of starting clays. XPS survey scans show that, at low surfactant concentration (<1.0 CEC), the ion exchange between Na⁺ and HDTMA⁺ is dominant, whereas both cations and ion pairs occur in the organoclays prepared at high concentrations (>1.0 CEC). High-resolution XPS spectra show that the modification of clay with surfactants has prominent influences on the binding energies of the atoms in both clays and surfactants, and nitrogen is the most sensitive to the surfactant distribution within the organoclays.     

Electrochemical and surface analytical study of the formation of oxide films on monel-400 and copper in alkaline media

The nature of the oxide films formed on monel-400 and copper in presence of NaOH and N-methylpyrrolidine (a volatile amine) at pH 9.5 and in 0.1 M KNO₃ medium were investigated. The oxide films were grown by applying an anodic potential of +0.4 V (vs saturated calomel electrode) for 30 min. The compositions of the surface oxide films were analysed by X-ray photoelectron spectroscopy. In the case of copper in NaOH medium, Cu(0) and a very small amount of copper hydroxide were observed. However, in amine medium, Cu(0) and Cu-amine complex were found. For monel in NaOH, the anodic film was found to contain hydroxides of both copper and nickel. After sputtering, this film showed a small amount of metal oxide below the hydroxide layer as confirmed by the oxygen peak. In amine medium the anodic film was found to contain only nickel hydroxide and metallic copper. The depth profile analysis of films showed that the film developed was very thin and the nickel hydroxide was sputtered very easily from the film. Received: 27 May 1997 / Accepted: 8 September 1997     

Preliminary Study on Pyrolysis of Polymethylsilsesquioxane by FT—IR and XPS

The term polysilsesquioxanes in this paper refers to all structures with the empiri-cal formulas (RSiO3/2)n where R is hydrogen or any alkyl, alkylene, aryl, arylene, or organo-functional derivatives of alkyl, alkylene, or aryl. Polymethylsilsesquioxane (PMSQ) is characterized by its low weight loss at high temperatures. X-ray photoelectron spectroscopy (XPS) characterization of PMSQ was unavailable from reported literatures. In this study, the pyrolysis was carried out in an inert at…     

Structural and electronic properties of HfO2 films on Si through H2O2 wet oxidation with improved thermal stability

The thermal stability and material properties of HfO₂ thin films on Si substrates with and without H₂O₂ wet chemical oxidation were investigated. The HfO₂ samples were deposited through plasma-enhanced atomic layer deposition and subjected to thermal annealing. They were then examined using X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, reflection electron energy loss spectroscopy, and conductive atomic force microscopy. For the Si substrate without H₂O₂ wet chemical oxidation, a native oxide (~1.8 nm) was formed on the substrate before HfO₂ deposition. After the annealing process at 600°C, the band gap (E_g) of the HfO₂ films increased from 6.0 to 6.2 eV due to the diffusion of Si into HfO₂. Furthermore, the conduction and valence band offsets (ΔE_c and ΔE_v, respectively) between HfO₂ and Si changed from 1.02 to 1.42 and 3.86 to 3.66 eV, respectively. After the H₂O₂ wet oxidation of the Si substrate, a 1.5-nm chemical oxide was formed instead of a native oxide. The band offset and E_g values of HfO₂ were similar before and after 600°C annealing (ΔE_v = 3.86 eV, ΔE_c = 1.02 eV, and E_g = 6.0 eV), implying the high thermal stability of the HfO₂ films. Accordingly, wet oxidation not only prevents diffusion from chemical oxide but also markedly improves the oxide leakage current, which is useful for developing highly efficient and thermally stable HfO₂ gate oxides in Si-based integrated circuit devices.     

Ni在ZrO2(111)薄膜表面的生长、电子结构及热稳定性

利用X射线光电子能谱、紫外光电子能谱和低能电子衍射研究了Ni纳米颗粒在ZrO₂(111)薄膜表面的生长模式、电子结构及热稳定性. ZrO₂(111)薄膜外延生长于Pt(111)单晶表面,厚度约为3 nm.结果表明,当Ni气相沉积到ZrO₂(111)薄膜表面上时,遵循Stranski-Krastanov生长模式,即先二维生长至0.5 ML(monolayer),然后呈三维岛状生长.随着覆盖度的减小, Ni 2p_3/2峰逐渐向高结合能位移.利用俄歇参数法分析发现,引起该峰向高结合能位移的主要原因来源于终态效应的贡献,但在低的Ni覆盖度时,也有部分初态效应的贡献,说明Ni在ZrO₂表面初始生长时,两者存在较强的界面相互作用, Ni向ZrO₂衬底传递电荷,形成带部分正电荷的Ni_δ+.两种不同覆盖度(0.05和0.5 ML)的Ni/ZrO₂(111)模型催化剂热稳定性研究表明,当温度升高时, Ni逐渐被氧化成Ni₂₊,并伴随着向ZrO₂衬底的扩散.本文从原子水平上认识了Ni与ZrO₂表面的相互作用和界面结构,为理解实际ZrO₂担载的Ni催化剂结构提供了重要的依据.     

Synthesis and characterization of enzyme-magnetic nanoparticle complexes: effect of size on activity and recovery

The influence of particle size on the activity and recycling capabilities of enzyme conjugated magnetic nanoparticles was studied. Co-precipitation and oxidation of Fe(OH)(2) methods were used to fabricate three different sizes of magnetic nanoparticles (5 nm, 26 nm and 51 nm). Glucose oxidase was covalently bound to the magnetic nanoparticles by modifying the surfaces with 3-(aminopropyl)triethoxysilane (APTES) and a common protein crosslinking agent, glutaraldehyde. Analysis by Transmission Electron Microscopy (TEM) showed that the morphology of the magnetic nanoparticles to be spherical and sizes agreed with results of the Brunauer, Emmett, and Teller (BET) method. Magnetic strength of the nanoparticles was analyzed by magnetometry and found to be 49 emu g(-1) (5 nm), 73 emu g(-1) (26 nm), and 85 emu g(-1) (51 nm). X-ray photoelectron spectroscopy (XPS) confirmed each step of the magnetic nanoparticle surface modification and successful glucose oxidase binding. The immobilized enzymes retained 15-23% of the native GOx activity. Recycling stability studies showed approximately 20% of activity loss for the large (51 nm) and medium (26 nm) size glucose oxidase-magnetic nanoparticle (GOx-MNP) bioconjugate and about 96% activity loss for the smallest GOx-MNP bioconjugate (5 nm) after ten cycles. The bioconjugates demonstrated equivalent total product conversions as a single reaction of an equivalent amount of the native enzyme after the 5th cycle for the 26 nm nanoparticles and the 7th cycle for the 51 nm nanoparticles.     

Surface properties of fluorinated single-walled carbon nanotubes

Single-walled carbon nanotubes (SWCNTs) were fluorinated at several different temperatures. The change of atomic and electronic structures of fluorinated SWCNTs was investigated using X-ray photoelectron spectroscopy (XPS), electrical resistivity measurements and transmission electron microscopy (TEM). The amount of doped fluorine increases with increasing doping temperature, and the fluorine atoms are covalently attached to the side-wall of the SWCNTs. From Raman spectra and HRTEM study, the strong fluorination on the SWCNTs leads to the breaking of carbon–carbon bonds and the disintegration of tube structure. Several intermediate phases of fluorinated SWCNTs are observed during e-beam irradiation in HRTEM.     

Oxidation and deprotonation of synthetic Fe-Fe (oxy)hydroxycarbonate Green Rust: An X-ray photoelectron study

X-ray photoelectron spectroscopy (XPS) was used to investigate chemical bonding and distribution of iron and oxygen species at the surface of Green Rusts (GRs). GRs with variable composition, i.e. Fe^II_6(1−x)Fe^III_6xO₁₂H_2(7−3x) CO₃·3H₂O where the Fe^III molar fraction of the positively charged hydroxide sheets, x=[Fe(III)]/[Fe(total)] belongs to [1/3, 1], were synthesised under an inert atmosphere. The broadened Fe(2p_3/2) spectra were fitted using Gupta and Sen multiplets peaks and additional satellite and surface features. The [Fe(III)]/[Fe(total)] surface atomic ratios closely agree with the x ratios expected from the bulk composition, which gives a high degree of confidence on the validity of the proposed fitting procedure. The valence band spectra are also reported and show dependencies on iron speciation. The O(1s) spectra revealed the presence of O²⁻, OH⁻ species and adsorbed water. The hydroxyl component decreases with increasing x values, i.e. with the amount of ferric iron, while the oxide component increases. This study provides direct spectroscopic evidence of the deprotonation of hydroxyl groups that occurs simultaneously with the oxidation of ferrous iron within the GR structure.     

Growth and Electronic Properties of Ag Nanoparticles on Reduced CeO2-x(111) Films

Ag nanoparticles grown on reduced CeO_2-x thin films have been studied by X-ray photoelec-tron spectroscopy and resonant photoelectron spectroscopy of the valence band to understand the effect of oxygen vacancies in the CeO_2-x thin films on the growth and interfacial elec-tronic properties of Ag. Ag grows as three-dimensional particles on the CeO_2-x(111) surface at 300 K. Compared to the fully oxidized ceria substrate surface, Ag favors the growth of smaller particles with a larger particle density on the reduced ceria substrate surface, which can be attributed to the nucleation of Ag on oxygen vacancies. The binding energy of Ag3d increases when the Ag particle size decreases, which is mainly attributed to the final-state screening. The interfacial interaction between Ag and CeO_2-x(111) is weak. The resonant enhancement of the 4f level of Ce³⁺ species in RPES indicates a partial Ce⁴⁺→Ce³⁺ re-duction after Ag deposited on reduced ceria surface. The sintering temperature of Ag on CeO_1.85(111) surface during annealing is a little higher than that of Ag on CeO₂(111) surface, indicating that Ag nanoparticles are more stable on the reduced ceria surface.     

Analysis of the antitarnish film on a tin surface by x-ray photoelectron spectroscopy and Auger electron spectroscopy

A corrosion-resistant complex film formed in ethylenediaminetetra(methylidenephosphonic acid) (EDTMP) solution was determined by x-ray photoelectron spectroscopy and Auger electron spectroscopy to consist of 48.0% O, 11.7% Sn, 7.7% N, 22.1% C and 10.5% P. From the differences in the binding energies of Sn, N and O before and after film formation and the RPO^2?₃ and SnN vibrations in the Raman spectrum of the film, it was deduced that N and O in EDTMP were coordinated with Sn in the film.     

One- and two-photon spectra of some selected molecules: A comparative study

The complementarity of one- and two-photon spectroscopy has been utilised for throwing light on the following problems of chemical interest: (1) Weak interaction between identical chromophores separated by insulating bridges gives rise to split states of different symmetries. Two-photon spectroscopy (TPA), in conjunction with one-photon absorption (OPA), has been used to identify the states and hence to estimate the magnitude of interaction in bimolecules and trimolecules. From the shifts between the one- and the two-photon spectra, the splittings have been estimated. Calculations confirm that the dominant interaction is the through-bond one. (2) The second type of problem is the identification ofg andu vibrations in molecules. We have initiated studies on three molecules in jet-cooled conditions: 9,10-dihydro-anthracene (DHA). 9,10-dihydro-phenanthrene (DHP) and octa-fluoronaph-thalene (OFN). Only the one-photon fluorescence excitation spectra have so far been obtained by us and the TPA spectra are under investigation. (3) The third class of molecules discussed here are the Ln³⁺ complexes wheref ⁿ⇒ fⁿ transitions are intrinsically two-photon allowed. We have studied two GD³⁺ single crystals. The CF-splittings, observed clearly in TPA, have been fitted with a parametric model. Some of our observations on the variations of TPA intensity patterns from crystal to crystal, such as circular:linear polarisation ratios, relative intensities of transitions to differentJ-states, do not quite fit in with the Axe-Judd-Downer model. The discrepancies call for a reappraisal of the role of ligand in the TPA process.     

The diffusion of Pt in BST films on Pt/Ti/SiO2/Si substrate by sol-gel method

Barium strontium titanate (Ba_0.65Sr_0.35TiO₃) ferroelectric thin films have been prepared by sol-gel method on Pt/Ti/SiO₂/Si substrate. The X-ray diffraction (XRD) pattern indicated that the films were a polycrystalline perovskite structure and the atomic force microscope (AFM) image showed that the crystallite size and the root mean square roughness (RMS) were 90 nm and 3.6 nm, respectively. The X-ray photoelectron spectrum (XPS) images showed that Pt consisting in BST thin films was the metallic state, and the Auger electron spectroscopy (AES) analysed the Pt concentration in different depth profiles of BST thin films. The result displayed that the Pt diffusion in BST thin film is divided into two regions: near the BST/Pt interface, the diffusion type was volume diffusion, and far from the interface correspondingly, the diffusion type became grain boundary diffusion. In this paper, the previous researcher’s result was used to verify our conclusion.     

Quantitative XPS of plutonium: Evaluation of the Pu4f peak shape,relative sensitivity factors and estimated detection limits

High-resolution X-ray photoelectron spectra have been acquired from sputter cleaned and in situ oxidized samples of α-plutonium and a face-centred cubic δ-plutonium–gallium alloy. The differences in the Pu4f peak shape in these two materials have been investigated, and the poorly screened satellite peaks have been quantified. Curve fitting parameters for the Pu4p_3/2, Pu4d_5/2, Pu4f and Pu6p_3/2 photoelectron peaks are reported, and relative sensitivity factors have been determined. The Pu4f curve fit model has been applied to data acquired using different spectrometers and alloys. Examples of quantification of the plutonium spectra are provided and minimum detection limits are calculated for common impurities in plutonium metal.     

A new simple preparation of platinum-nickel alloy nanoparticles and their characterization as an electrocatalyst for methanol oxidation

Pt-Ni alloy nanoparticles were produced by casting 2 or 10 mM H₂PtCl₆ solutions on a Ni column. The apparent particle size for the resultant Pt-Ni alloys increased with the concentration of the H₂PtCl₆ solution, while the content of Pt in the alloy decreased. The potential sweeps of 5 cycles in an H₂SO₄ aqueous solution for Pt-Ni (2 mM)/Ni and Pt-Ni (10 mM)/Ni electrodes led to electrochemical behavior similar to a polycrystalline Pt electrode, suggesting the formation of a few thin Pt layers on each Pt-Ni alloy surface. In electrochemical measurements, both Pt-Ni/Ni electrodes showed more negative onset potential of methanol oxidation and slower degradation of oxidation current of methanol than the polycrystalline Pt electrode. X-ray photoelectron spectroscopy of both Pt-Ni/Ni electrodes showed the shift of Pt4f peaks to a higher binding energy, suggesting that the increase in the d vacancy in the balance band 5d orbital of Pt contributed to the improved electrocatalytic activity and durability of the Pt-Ni/Ni electrodes.     

Structure and electrical properties of a-C∶H films deposited from CH4 decomposition in a low frequency discharge

a-C∶H films have been deposited from methane in a 20 KHz discharge. The Current Voltage characteristics of the plasma have been plotted as a function of the CH₄ pressure. It was shown that below 0.1 mbar the graphitic content in the films estimated from Raman Spectroscopy and Electron Energy Loss Spectroscopy is high enough to give electrical conductivity controlled by a percolation mechanism. It was also found that the a:c electrical responses of the deposited films are more sensitive to the structure than any other chemical analysis. The electrical analysis might be a good tool for structural investigations on a-C∶H films.     

Bromine Adsorption and Thermal Stability on Rh(111): A Combined XPS,LEED and DFT Study

This study addresses a fundamental question in surface science: the adsorption of halogens on metal surfaces. Using synchrotron radiation-based high-resolution X-ray photoelectron spectroscopy (XPS), temperature-programmed XPS, low-energy electron diffraction (LEED) and density functional theory (DFT) calculations, we investigated the adsorption and thermal stability of bromine on Rh(111) in detail. The adsorption of elemental bromine on Rh(111) at 170 K was followed in situ by XPS in the Br 3d region, revealing two individual, coverage-dependent species, which we assign to fcc hollow- and bridge-bound atomic bromine. In addition, we find a significant shift in binding energy upon increasing coverage due to adsorbate-adsorbate interactions. Subsequent heating shows a high thermal stability of bromine on Rh(111) up to above 1000 K, indicating strong covalent bonding. To complement the XPS data, LEED was used to study the long-range order of bromine on Rh(111): we observe a (√3×√3)R30° structure for low coverages (≤0.33 ML) and a star-shaped compression structure for higher coverages (0.33–0.43 ML). Combining LEED and DFT calculations, we were able to visualize bromine adsorption on Rh(111) in real space for varying coverages.     

Characterization of chromate conversion film on tinplate substrate by XPS and electrochemistry methods

The chromate conversion coating formed on commercial tinplate via a cathode electrolytic dichromate treatment has been studied by X‐ray photoelectron spectroscopy (XPS) and electrochemistry methods. Through the analysis of the XPS, it was shown that there existed Cr, O, and Sn in the chromate coating and the chromate film consisted mainly of Cr(OH)₃, Cr₂O₃, Sn, and SnO_x. The current density decreased with increasing of the electric charge. The corrosion resistance for tinplate is relative with the content of chromium in the passivation film. Copyright © 2009 John Wiley & Sons, Ltd.