Low-temperature NMR studies of the structure and dynamics of a novel series of acid-base complexes of HF with collidine exhibiting scalar couplings across hydrogen bonds

The low-temperature (1)H, (19)F, and (15)N NMR spectra of mixtures of collidine-(15)N (2,4,6-trimethylpyridine-(15)N, Col) with HF have been measured using CDF(3)/CDF(2)Cl as a solvent in the temperature range 94-170 K. Below 140 K, the slow proton and hydrogen bond exchange regime is reached where four hydrogen-bonded complexes between collidine and HF with the compositions 1:1, 2:3, 1:2, and 1:3 could be observed and assigned. For these complexes, chemical shifts and scalar coupling constants across the (19)F(1)H(19)F and (19)F(1)H(15)N hydrogen bridges have been measured which allowed us to determine the chemical composition of the complexes. The simplest complex, collidine hydrofluoride ColHF, is characterized at low temperatures by a structure intermediate between a molecular and a zwitterionic complex. Its NMR parameters depend strongly on temperature and the polarity of the solvent. The 2:3 complex [ColHFHCol](+)[FHF](-) is a contact ion pair. Collidinium hydrogen difluoride [ColH](+)[FHF](-) is an ionic salt exhibiting a strong hydrogen bond between collidinium and the [FHF](-) anion. In this complex, the anion [FHF](-) is subject to a fast reorientation rendering both fluorine atoms equivalent in the NMR time scale with an activation energy of about 5 kcal mol(-)(1) for the reorientation. Finally, collidinium dihydrogen trifluoride [ColH](+)[F(HF)(2)](-) is an ionic pair exhibiting one FHN and two FHF hydrogen bonds. Together with the [F(HF)(n)()](-) clusters studied previously (Shenderovich et al., Phys. Chem. Chem. Phys. 2002, 4, 5488), the new complexes represent an interesting model system where the evolution of scalar couplings between the heavy atoms and between the proton and the heavy atoms of hydrogen bonds can be studied. As in the related FHF case, we observe also for the FHN case a sign change of the coupling constant (1)J(FH) when the F.H distance is increased and the proton shifted to nitrogen. When the sign change occurs, that is, (1)J(FH) = 0, the heavy atom coupling constant (2)J(FN) remains very large, of the order of 95 Hz. Using the valence bond order model and hydrogen bond correlations, we describe the dependence of the hydrogen bond coupling constants, of hydrogen bond chemical shifts, and of some H/D isotope effects on the latter as a function of the hydrogen bond geometries.     

Experimental investigation of toluene + H --> benzyl + H2 at high temperatures

The reaction of toluene with hydrogen atoms yielding benzyl and molecular hydrogen, C(6)H(5)CH(3) + H --> C(6)H(5)CH(2) + H(2), was investigated using UV laser absorption of benzyl radicals at 266 nm in shock tube experiments. Test gas mixtures of toluene and ethyl iodide, an H-atom source, diluted in argon were heated in reflected shock waves to temperatures ranging from 1256 to 1667 K at total pressures around 1.7 bar. Measurement of laser absorption at 266 nm due to benzyl radicals allowed determination of the rate coefficient of the title reaction, reaction 1. A two-parameter best-fit Arrhenius expression for the rate determinations over the temperature range of these experiments is given by k(1)(T) = 1.33 x 10(15) exp(-14880 [cal/mol]/RT) [cm(3) mol(-1) s(-1)]. With the use of both the high-temperature shock tube measurements reported here and the rate coefficient determination of Ellis et al. (Ellis, C.; Scott, M. S.; Walker, R. W. Combust. Flame 2003, 132, 291) at 773 K the best-fit rate coefficient for reaction 1 can be described using a three-parameter Arrhenius expression by k(1)(T) = 6.47T (3.98) exp(-3384 [cal/mol]/RT) [cm(3) mol(-1) s(-1)].     

Equation of state of nitrogen (N2) at high pressures and high temperatures: molecular dynamics simulation

Nitrogen equation of state at pressures up to 30 GPa (300 kbars) and temperatures above 800 K was studied by molecular dynamics (MD) simulations. The dynamics of the N(2) molecules is treated in hard rotor approximation, i.e., it accounts both translational and rotational degrees of freedom. The rotational motion of the N(2) molecule is treated assuming constant moment of inertia of the nitrogen molecule. The new MD program fully accounts anisotropic molecular nitrogen interaction. The N(2)-N(2) interaction potential has been derived by van der Avoird et al. [J. Chem. Phys. 84, 1629 (1986)] using the results of high precision Hartree-Fock ab initio quantum mechanical calculations. The potential, fully accounts rotational symmetry of the N(2)-N(2) system, by employing 6-j Wigner symbols, i.e., preserving full rotational symmetry of the system. Various numerical algorithms were tested, in order to achieve the energy preservation during the simulation. It has been demonstrated that the standard Verlet algorithm was not preserving the energy for the standard MD time step, equal to 5x10(-16) s. Runge-Kutta fourth order method was able to preserve the energy within 10(-4) relative error, but it requires calculation of the force four times for each time step and therefore it is highly inefficient. A predictor-corrector method of the fifth order (PC5) was found to be efficient and precise and was therefore adopted for the simulation of the molecular nitrogen properties at high pressure. Singer and Fincham algorithms were tested and were found to be as precise as PC5 algorithm and they were also used in the simulation of the equation of state. Results of MD simulations are in very good agreement with the experimental data on nitrogen equation of state at pressures below 1 GPa (10 kbars). For higher pressures, up to 30 GPa (300 kbars), i.e., close to molecular nitrogen stability limit, determined by Nellis et al. [Phys. Rev. Lett. 85, 1262 (1984)], the obtained numerical results provide new data of the experimentally unexplored region. These data were formulated in the analytical form of pressure-density-temperature equation of state.     

Isostructural self-assembled monolayers. 2. Methyl 1-(3-mercaptopropyl)-oligo(ethylene oxide)s

The structural order and ordering conditions of the self-assembled monolayers (SAMs) of HSCH2CH2CH2O(EO)xCH3, where EO = CH2CH2O and x = 3-9, on polycrystalline gold (Au) were determined by reflection-absorption infrared spectroscopy (RAIRS), spectroscopic ellipsometry (SE), and electrochemical impedance spectroscopy. For x = 5-7, RAIRS and SE data show that the oligo(ethylene oxide) [OEO] segments adopt the near single phase, 7/2 helical conformation of the folded-chain crystal polymorph of crystalline poly(ethylene oxide), oriented normal to the substrate. These SAMs exhibit OEO segment structure and orientation identical to that found in a previous isostructural series [HS(CH2CH2O)6-8C18H37 SAMs. Vanderah, D. J., et al. Langmuir 2003, 19, 3752] and are anisotropic films for surface science metrology where structure is constant and thickness increases in 0.30 nm increments. In addition, this is the first example of OEO SAMs to attain this highly ordered, helical conformation where the (EO)x segment is separated from the Au-sulfur headgroup by a polymethylene chain. For x = 4, 8, and 9, the SAMs are largely helical but show evidence of nonhelical conformations and establish the upper and lower limits of the isostructural set. For x = 3, the SAMs are largely disordered containing some all-trans conformation. SAM order as a function of immersion time from 100% water and 95% ethanol indicates that the HSCH2CH2CH2O(EO)5-7CH3 SAMs order faster and under a wider range of conditions than omega-alkyl 1-thiaolio(ethylene oxide) [HS(EO)xCH3] SAMs, reported earlier (Vanderah, D. J., et al. Langmuir 2002, 18, 4674 and Vanderah, D. J., et al. Langmuir 2003, 19, 2612).     

Structural chemistry of arachno-nonaboranes

Single-crystal conventional-tube and synchrotron X-ray diffraction studies of the anions in [NMe(4)][arachno-B(9)H(12)-4,8-Br(2)] 1 and K[arachno-B(9)H(14)] 2, and also of the series of adducts [arachno-B(9)H(13)-4-L], where L is P(CCH)(3) (3), NHEt(2) (4), NC(5)H(5) (5), or NH(2)CH(2)Ph (6), are reported. Structural studies of 1-6, determined at low temperatures, located all atoms, including bridging and endo-terminal hydrogen atoms. The basic boron-hydride clusters of these, and of all the other known species with the arachno nine-vertex i-nonanborane geometry reported in the literature, are isostructural and feature three bridging and two endo-terminal hydrogen atoms on the open face. This arrangement is different from that previously reported for Cs[arachno-B(9)H(14)] 7 and for [arachno-B(9)H(13)-4-(NCMe)] 9. However, a new X-ray diffraction data set and refinement experimentally confirm the [3 x mu-H, 2 x endo] arrangement for 9 also. The experimental results for 1-6 support recently reported calculations for [B(9)H(14)](-), which predict both the structures and the (11)B NMR chemical shifts. These conclusions are also supported by calculations for 3, 4, and 9 and also for the [arachno-B(9)H(13)-4-(NCS)](-) anion in [NMe(4)][B(9)H(13)(NCS)] 8.     

Etching behavior of silicon nanowires with HF and NH4F and surface characterization by attenuated total reflection Fourier transform infrared spectroscopy: similarities and differences between one-dimensional and two-dimensional silicon surfaces

A systematic study of the etching behavior of one-dimensional (1-D) Si nanowires (SiNWs) in various HF and NH4F etching solutions is reported. The concentration and pH dependences of the etching time (which is inverse to the "stability") of the SiNWs in these solutions were investigated. A V-shaped bimodal etching curve was observed for HF solutions with concentrations of 0.5-40%. Specifically, SiNWs exhibit high stability in both low (0.5%) and high (40%) concentrations of HF solution, with the lowest stability (i.e., fastest etching rate) occurring at 2% (1 M) HF solution. With NH4F, the time needed to totally etch away the SiNWs sample decreases with increasing concentration (from 1-40%). The opposite is true when the pH of the NH4F solution was maintained at 14. These surprising results were rationalized in terms of "passivation" of the SiNW surfaces by HF or related molecules via hydrogen bonding for Si-H-terminated surfaces in HF solutions (with low pH values) and by NH4(+) ions via ionic bonding for Si-O(-)-terminated surfaces in NH4F solutions (with high pH values), respectively. Furthermore, it was found that SiNWs are stable only in relatively narrow pH ranges in these solutions. When SiNWs are etched with HF, the stability range is pH = 1-2 where the surface moieties are Si-H(x) species (x = 1-3). When SiNWs are etched with NH4F, the stability range is pH = 12-14 where the surface moieties are mainly Si-(O-)x species (x = 1-3). These rationales were confirmed by attenuated total reflection Fourier transform infrared spectroscopy measurements, which showed that, while etching SiNWs with HF gave rise to Si-H(x) surface species, no Si-H(x) species were observed when SiNWs were etched with NH4F. The latter finding is at odds with the corresponding results reported for the two-dimensional (2-D) Si wafers where etching with either HF or NH4F produces Si-H(x) species on the surface. This difference suggests either that the etching mechanisms for NH4F versus HF are different for SiNWs or, more likely, that the Si-H(x) surface species produced in NH4F solutions are so unstable that they are hydrolyzed readily at pH > 4. The similarities and differences of the etching behaviors and the resulting surface speciations between the 1-D SiNWs and the 2-D Si wafers suggest that the nanoscale structures as well as the low dimensionality of SiNWs may have contributed to the rapid hydrolysis of the surface Si-H(x) species in NH4F solutions, especially at high pH values.     

Electronic structure, excited states, and photoelectron spectra of uranium, thorium, and zirconium bis(Ketimido) complexes (C5R5)2M[-NCPh2]2 (M = Th, U, Zr; R = H, CH3)

Organometallic actinide bis(ketimide) complexes (C5Me5)2An[-N=C(Ph)(R)]2 (where R = Ph, Me, and CH2Ph) of thorium(IV) and uranium(IV) have recently been synthesized that exhibit chemical, structural, and spectroscopic (UV-Visible, resonance-enhanced Raman) evidence for unusual actinide-ligand bonding. [Da Re et al., J. Am. Chem. Soc., 2005, 127, 682; Jantunen et al., Organometallics, 2004, 23, 4682; Morris et al., Organometallics, 2004, 23, 5142.] Similar evidence has been observed for the group 4 analogue (C5H5)2Zr[-N=CPh2]2. [Da Re et al., J. Am. Chem. Soc., 2005, 127, 682.] These compounds have important implications for the development of new heavy-element systems that possess novel electronic and magnetic properties. Here, we have investigated M-ketimido bonding (M = Th, U, Zr), as well as the spectroscopic properties of the highly colored bis-ketimido complexes, using density functional theory (DFT). Photoelectron spectroscopy (PES) has been used to experimentally elucidate the ground-state electronic structure of the thorium and uranium systems. Careful examination of the ground-state electronic structure, as well as a detailed modeling of the photoelectron spectra, reveals similar bonding interactions between the thorium and uranium compounds. Using time-dependent DFT (TDDFT), we have assigned the bands in the previously reported UV-Visible spectra for (C5Me5)2Th[-N=CPh2]2, (C5Me5)2U[-N=CPh2]2, and (C5H5)2Zr[-N=CPh2]2. The low-energy transitions are attributed to ligand-localized N p --> C=N pi excitations. These excited states may be either localized on a single ketimido unit or may be of the ligand-ligand charge-transfer type. Higher-energy transitions are cyclopentadienyl pi --> CN pi or cyclopentadienyl pi --> phenyl pi in character. The lowest-energy excitation in the (C5Me5)2U[-N=Ph2]2 compound is attributed to f-f and metal-ligand charge-transfer transitions that are not available in the thorium and zirconium analogues. Geometry optimization and vibrational analysis of the lowest-energy triplet state of the zirconium and thorium compounds also aids in the assignment and understanding of the resonance-enhanced Raman data that has recently been reported. [Da Re et al., J. Am. Chem. Soc., 2005, 127, 682.].     

Reversible dioxygen binding and phenol oxygenation in a tyrosinase model system

The complex [Cu2(L-66)]2+ (L-66 = a,a'-bis?bis[2-(1'-methyl-2'-benzimidazolyl)ethyl]amino?-m-xylene) undergoes fully reversible oxygenation at low temperature in acetone. The optical [lambda(max) = 362 (epsilon 15000), 455 (epsilon 2000), and 550 nm (epsilon 900M(-1)cm(-1))] and resonance Raman features (760 cm(-1), shifted to 719cm(-1)(-1) with 18O2) of the dioxygen adduct [Cu2(L-66)(O2)]2+ indicate that it is a mu-eta2:eta2-peroxodicopper(II) complex. The kinetics of dioxygen binding, studied at - 78 degrees C, gave the rate constant k1 = 1.1M(-1) 5(-1) for adduct formation, and k(-1) =7.8 x 10(-5)s(-1), for dioxygen release from the Cu2O2 complex. From these values, the O2 binding constant K= 1.4 x 10(4)M(-1) at -78 degrees C could be determined. The [Cu2(L-66)(O2)]2+ complex performs the regiospecific ortho-hydroxylation of 4-carbomethoxyphenolate to the corresponding catecholate and the oxidation of 3,5-di-tert-butylcatechol to the quinone at -60 degrees C. Therefore, [Cu2(L-66)]2+ is the first synthetic complex to form a stable dioxygen adduct and exhibit true tyrosinase-like activity on exogenous phenolic compounds.     

The synthesis,vibrational spectra,and molecular structure of [Ir(CO)(6)][SbF(6)](3).4HF - the first structurally characterized salt with a tripositive,homoleptic metal carbonyl cation and the first example of a tetrahedral hydrogen-bonded (HF)(4) cluster

The reductive carbonylation of IrF(6) in a dilute solution of SbF(5) in anhydrous HF (1:6 by volume) produces surprisingly at 25 degrees C and 1.5 atm CO the complex salt [Ir(CO)(6)][SbF(6)](3).4HF, while [Ir(CO)(6)][Sb(2)F(11)](3) is obtained in liquid SbF(5) under similar conditions. Vibrational spectra in the CO stretching range for both salts and [Ir(CO)(6)](3+)((solv)) are identical within error limits, and nu(CO)(av) is with 2269 cm(-1) the highest average stretching frequency so far observed for octahedral metal carbonyl cations. A vibrational assignment supported by DFT calculations is presented, and the vibrational fundamentals are compared to those of [Os(CO)(6)](2+). The molecular structure of [Ir(CO)(6)][SbF(6)](3).4HF is determined by single-crystal X-ray diffraction. Crystal data for [Ir(CO)(6)][SbF(6)](3).4HF: rhombohedral, R3c (No. 161), a = 14.630(4) A, c = 18.377(7) A, V = 3406.4(18) A(3), Z = 6, T = 150 K, R(1) = 0.0338 [I > 2sigma (I)], wR(2) = 0.0797). The average Ir-C bond length in the octahedral [Ir(CO)(6)](3+) cation is with 2.029(10) the longest observed for iridium carbonyl derivatives, consistent with the absence of Ir --> CO pi-back-bonding. The four solvate HF molecules form a tetrahedron via long, asymmetric, and partly delocalized hydrogen bonds with F-F edge lengths of 2.857 (3x) and 2.914 (3x) A. There is no precedent for a polyhedral (HF)(n) cluster in the gas, liquid, or solid phase. The four F atoms of the (HF)(4) cluster are coordinated to the C atoms of the six CO ligands of the cation, which again is without precedent. The coordination of one of the F atoms to three C atoms in a iso-tridentate mode with contact distances C-F(8) of 2.641(10) A is most unusual. The observed tight C-F coordination in [Ir(CO)(6)][SbF(6)](3).4HF provides conclusive evidence for the presence of electrophilic carbon in the cation and illustrates how superelectrophilic cations such as [Ir(CO)(6)](3+) are solvent stabilized in the conjugate Br?nsted-Lewis superacid HF-SbF(5).     

应用ABEEMσπ／MM模型探讨小α-螺旋在显性水中折叠／展开的可逆过程

应用ABEEMσπ／MM模型进行分子动力学模拟,研究了显性水溶液中小α-螺旋（短肽Ala5）折叠／展开的可逆过程．动力学分析显示,300K下α-螺旋可以保存2ns的时间,该结果支持Margulis等人的结论．每个结构与α-螺旋结构骨架重原子的均方根偏差的时间轨迹指出,“300K下螺旋成核现象在0．1ns内快速发生”的结论是不恰当的．通过对300、400和500K温度下的研究,首次定量地给出各温度下螺旋保存的时间分别为2ns、1～1．5ns和0．8ns,并且增加温度并不改变折叠／展开的方式,只是改变折叠／展开的速率．本文对“转化态集合”结构的分析表明,从螺旋到卷曲的转换,主要通过螺旋端的氢键断裂发生（92％）、尤其是C端的氢键断裂发生（50％）．氢键的破坏和形成在0．1ns的时间内完成．     

Thermal- and pressure-induced cooperative spin transition in the 2D and 3D coordination polymers {Fe(5-Br-pmd)z[M(CN)x]y} (M=AgI, AuI, NiII, PdII, PtII)

A new family of cyanide-based spin-crossover polymers with the general formula {Fe(5-Br-pmd)z[M(CN)x]y} [M=AgI (1), AuI (2), NiII (3), PdII (4), PtII (5); 5-Br-pmd=5-bromopyrimidine; z=1 or 2, x=2 or 4, and y=2 or 1] have been synthesized and characterized using single-crystal X-ray diffraction (XRD), X-ray powder diffraction (XRPD), magnetic susceptibility measurements, and differential scanning calorimetry (DSC). At 293 K, compound 1 presents the monoclinic space group C2/c, whereas at 120 K, it changes to the monoclinic space group P21/c. At 293 K, the crystal structure of 1 displays an uninodal three-dimensional network whose nodes, constituted of FeII, lie at the inversion center of an elongated octahedron. The equatorial bond lengths are defined by the N atoms of four [AgI(CN)2]- groups belonging to two crystallographically nonequivalent AgI atoms, Ag(1) and Ag(2). They are shorter than those of the axial positions occupied by the N atoms of the 5-Br-pmd ligands. The Fe-N average bond length of 2.1657(7) A is consistent with a high-spin (HS) state for the FeII ions. At 120 K, the crystal structure changes refer mainly to the FeII environment. There are two crystallographically independent FeII ions at this temperature, Fe(1) and Fe(2), which adopt the HS and low-spin (LS) states, respectively. The average Fe-N bond length for Fe(1) [2.174(5) A] and Fe(2) [1.955(5) A] agrees well with the reported magnetic data at this temperature. The spin transition of the FeII ions labeled as Fe(1) is found to be centered at Tc downward arrow=149 K and Tc upward arrow=167 K and accompanied by a drastic change of color from orange (HS) to red (LS). Magnetic susceptibility measurements under applied hydrostatic pressure performed on 1 have shown a linear displacement of the transition to higher temperatures while the hysteresis width remains unaltered in the interval of pressures of 105 Pa to 0.34 GPa. A further increase of the pressure induces the spin transition in the Fe(2) ions, which is completely accomplished at 1.12 GPa (T1/2=162 K). Compounds 1 and 2 are isostructural, but 2 does not exhibit spin-transition properties; the FeII centers remain in the HS state in the temperature range investigated, 5-300 K. Compounds 3-5 are not similar or isostructural with 1. A two-dimensional structure for 3-5 has been proposed on the basis of analytical data and the XRPD patterns. Compounds 3-5 undergo first-order spin transition where the critical temperatures for the cooling (Tc downward arrow) and warming (Tc upward arrow) modes are 170 and 180 K (3), 204 and 214 K (4), and 197 and 223 K (5), respectively. It is worth mentioning the color change from yellow to orange observed in 3-5 upon spin transition. The thermodynamic parameters associated with the spin transition estimated from DSC measurements are DeltaH=6 kJ mol(-1) (1), 11 kJ mol(-1) (3), 16 kJ mol(-1) (4), and 16 kJ mol(-1) (5) and DeltaS=38 J K(-1) mol(-1) (1), 62 J K(-1) mol(-1) (3), 76 J K-1 mol(-1) (4), and 81 J K(-1) mol(-1) (5).     

Ion induced dipole clusters H(n)- (3 ≤ n-odd ≤ 13): density functional theory calculations of structure and energy

We investigate anew the possible equilibrium geometries of ion induced dipole clusters of hydrogen molecular ions, of molecular formula H(n)(-) (3 ≤ n-odd ≤ 13). Our previous publications [Sapse, A. M.; et al. Nature 1979, 278, 332; Rayez, J. C.; et al., J. Chem. Phys. 1981, 75, 5393] indicated these molecules would have a shallow minimum and adopt symmetrical geometries that accord with the valence shell electron pair repulsion (VSEPR) rules for geometries defined by electron pairs surrounding a central point of attraction. These earlier calculations were all based upon Hartree-Fock (HF) calculations with a fairly small basis of atomic functions, except for the H3(-) ion for which configuration interaction (CI) calculations were carried out. A related paper [Hirao, K.; et al., Chem. Phys. 1983, 80, 237] carried out similar calculations on the same clusters, finding geometries similar to our earlier calculations. However, although that paper argued that the stabilization energy of negative ion clusters H(n)(-) is small, vibration frequencies for the whole set of clusters was not reported, and so a definitive assertion of a true equilibrium was not present. In this paper we recalculate the energetics of the ion induced dipole clusters using density function theory (DFT) B3LYP method calculations in a basis of functions (6-311++G(d,p)). By calculating the vibration frequencies of the VSEPR geometries, we prove that in general they are not true minima because not all the resulting frequencies correspond to real values. By searching the energy surface of the B3LYP calculations, we find the true minimum geometries, which are surprising configurations and are perhaps counterintuitive. We calculate the total energy and binding energy of the new geometries. We also calculate the bond paths associated with the quantum theory of atoms in molecules (QTAIM). The B3LYP/6-311++G(d,p) results, for each molecule, deliver bond paths that radiate between each polarized H2 molecule and the polarizing H(-) ion.     

H2 storage in isostructural UiO-67 and UiO-66 MOFs

The recently discovered UiO-66/67/68 class of isostructural metallorganic frameworks (MOFs) [J. H. Cavka et al. J. Am. Chem. Soc., 2008, 130, 13850] has attracted great interest because of its remarkable stability at high temperatures, high pressures and in the presence of different solvents, acids and bases [L. Valenzano et al. Chem. Mater., 2011, 23, 1700]. UiO-66 is obtained by connecting Zr(6)O(4)(OH)(4) inorganic cornerstones with 1,4-benzene-dicarboxylate (BDC) as linker resulting in a cubic MOF, which has already been successfully reproduced in several laboratories. Here we report the first complete structural, vibrational and electronic characterization of the isostructural UiO-67 material, obtained using the longer 4,4'-biphenyl-dicarboxylate (BPDC) linker, by combining laboratory XRPD, Zr K-edge EXAFS, TGA, FTIR, and UV-Vis studies. Comparison between experimental and periodic calculations performed at the B3LYP level of theory allows a full understanding of the structural, vibrational and electronic properties of the material. Both materials have been tested for molecular hydrogen storage at high pressures and at liquid nitrogen temperature. In this regard, the use of a longer ligand has a double benefit: (i) it reduces the density of the material and (ii) it increases the Langmuir surface area from 1281 to 2483 m(2) g(-1) and the micropore volume from 0.43 to 0.85 cm(3) g(-1). As a consequence, the H(2) uptake at 38 bar and 77 K increases from 2.4 mass% for UiO-66 up to 4.6 mass% for the new UiO-67 material. This value is among the highest values reported so far but is lower than those reported for MIL-101, IRMOF-20 and MOF-177 under similar pressure and temperature conditions (6.1, 6.2 and 7.0 mass%, respectively) [A. G. Wong-Foy et al. J. Am. Chem. Soc., 2006, 128, 3494; M. Dinca and J. R. Long. Angew. Chem., Int. Ed., 2008, 47, 6766]. Nevertheless the remarkable chemical and thermal stability of UiO-67 and the absence of Cr in its structure would make this material competitive.     

Characterization of highly unusual NH+-O hydrogen bonding to ester ether oxygen atoms through spectroscopic and computational studies

We characterize a highly unusual, charged NH-O hydrogen bond formed within esters of 8-(dimethylamino)naphthalen-1-ol in which an ammonium ion serves as an intramolecular hydrogen bond donor to spatially proximate ester ether oxygen atoms. Infrared spectroscopic analysis of the ester carbonyl frequencies demonstrates significant blue-shifting when ether hydrogen bonding is possible, in stark contrast to the more commonly observed red shift that occurs upon hydrogen bonding to the ester carbonyl oxygen. The intrinsic behavior of the linkage (i.e., in which counterions and solvent effects are eliminated) is provided by vibrational predissociation spectroscopy of the isolated gas-phase cations complexed with weakly bound D(2) molecules.     

Methanation of CO over nickel: Mechanism and kinetics at high H2/CO ratios

The CO methanation reaction over nickel was studied at low CO concentrations and at hydrogen pressures slightly above ambient pressure. The kinetics of this reaction is well described by a first-order expression with CO dissociation at the nickel surface as the rate-determining step. At very low CO concentrations, adsorption of CO molecules and H atoms compete for the sites at the surface, whereas the coverage of CO is close to unity at higher CO pressures. The ratio of the equilibrium constants for CO and H atom adsorption, K(CO)/K(H), was obtained from the rate of CO methanation at various CO concentrations. K(H) was determined independently from temperature programmed adsorption/desorption of hydrogen to be K(H) = 7.7 x 10(-4) (bar(-0.5)) exp[43 (kJ/mol)/RT] and hence the equilibrium constants for adsorption of CO molecules may be calculated to be K(CO) = 3 x 10(-7) (bar(-1)) exp[122 (kJ/mol)/RT]. Furthermore, the rate of dissociation of CO at the catalyst surface was determined to be 5 x 10(9) (s(-1)) exp[-96.7 (kJ/mol)/RT] assuming that 5% of the surface nickel atoms are active for CO dissociation. The results are compared to equilibrium and rate constants reported in the literature.     

A calorimetric study on the low temperature dynamics of doped ice V and its reversible phase transition to hydrogen ordered ice XIII

Doped ice V samples made from solutions containing 0.01 M HCl (DCl), HF (DF), or KOH (KOD) in H(2)O (D(2)O) were slow-cooled from 250 to 77 K at 0.5 GPa. The effect of the dopant on the hydrogen disorder --> order transition and formation of hydrogen ordered ice XIII was studied by differential scanning calorimetry (DSC) with samples recovered at 77 K. DSC scans of acid-doped samples are consistent with a reversible ice XIII <--> ice V phase transition at ambient pressure, showing an endothermic peak on heating due to the hydrogen ordered ice XIII --> disordered ice V phase transition, and an exothermic peak on subsequent cooling due to the ice V --> ice XIII phase transition. The equilibrium temperature (T(o)) for the ice V <--> ice XIII phase transition is 112 K for both HCl doped H(2)O and DCl doped D(2)O. From the maximal enthalpy change of 250 J mol(-1) on the ice XIII --> ice V phase transition and T(o) of 112 K, the change in configurational entropy for the ice XIII --> ice V transition is calculated as 2.23 J mol(-1) K(-1) which is 66% of the Pauling entropy. For HCl, the most effective dopant, the influence of HCl concentration on the formation of ice XIII was determined: on decreasing the concentration of HCl from 0.01 to 0.001 M, its effectiveness is only slightly lowered. However, further HCl decrease to 0.0001 M drastically lowered its effectiveness. HF (DF) doping is less effective in inducing formation of ice XIII than HCl (DCl) doping. On heating at a rate of 5 K min(-1), kinetic unfreezing starts in pure ice V at approximately 132 K, whereas in acid doped ice XIII it starts at about 105 K due to acceleration of reorientation of water molecules. KOH doping does not lead to formation of hydrogen ordered ice XIII, a result which is consistent with our powder neutron diffraction study (C. G. Salzmann, P. G. Radaelli, A. Hallbrucker, E. Mayer, J. L. Finney, Science, 2006, 311, 1758). We further conjecture whether or not ice XIII has a stable region in the water/ice phase diagram, and on a metastable triple point where ice XIII, ice V and ice II are in equilibrium.     

Quantum Monte Carlo calculations of the dissociation energy of the water dimer

We report diffusion quantum Monte Carlo (DMC) calculations of the equilibrium dissociation energy D(e) of the water dimer. The dissociation energy measured experimentally, D(0), can be estimated from D(e) by adding a correction for vibrational effects. Using the measured dissociation energy and the modern value of the vibrational energy Mas et al., [J. Chem. Phys. 113, 6687 (2000)] leads to D(e)=5.00+/-0.7 kcal mol(-1), although the result Curtiss et al., [J. Chem. Phys. 71, 2703 (1979)] D(e)=5.44+/-0.7 kcal mol(-1), which uses an earlier estimate of the vibrational energy, has been widely quoted. High-level coupled cluster calculations Klopper et al., [Phys. Chem. Chem. Phys. 2, 2227 (2000)] have yielded D(e)=5.02+/-0.05 kcal mol(-1). In an attempt to shed new light on this old problem, we have performed all-electron DMC calculations on the water monomer and dimer using Slater-Jastrow wave functions with both Hartree-Fock approximation (HF) and B3LYP density functional theory single-particle orbitals. We obtain equilibrium dissociation energies for the dimer of 5.02+/-0.18 kcal mol(-1) (HF orbitals) and 5.21+/-0.18 kcal mol(-1) (B3LYP orbitals), in good agreement with the coupled cluster results.     

Glycyl‐L‐alanine: a multi‐temperature neutron study

Neutron diffraction data have been collected at 12, 50, 150 and 295 K for the dipeptide glycyl‐L‐alanine, C₅H₁₀N₂O₃, in order to obtain accurate positional and anisotropic displacement parameters for the H atoms. The values of these parameters serve as a benchmark for assessing the equivalent parameters obtained from a so‐called Hirshfeld‐atom refinement of X‐ray diffraction data described elsewhere [Capelli et al. (2014). IUCrJ, 1 , 361–379]. The flexibility of the glycyl‐L‐alanine molecule in the solid and the hydrogen‐bonding interactions as a function of temperature are also considered.     

On the pressure-induced loss of crystallinity in orthophosphates of zinc and calcium

A recently suggested mechanism for the stress memory of various metal phosphates is investigated experimentally. Based on first-principles simulations [N. J. Mosey et al., Science 307, 1612 (2005)], it had been argued that atoms with flexible coordination, such as zinc or heavy-metal cations, act as network-forming agents, undergoing irreversible pressure-induced changes in bonding that lead to increased connectivity between phosphate anions. In the present study, orthophosphates of zinc and calcium were exposed to high pressures on surfaces and in diamond anvil cells. An additional set of first-principles simulations was accomplished on alpha-orthophosphate of zinc, which suggested that this material was already cross-linked before compression but that it nevertheless underwent a reversible coordination change under pressure in agreement with the experimental results presented here. Raman spectra indicate an irreversible, pressure-induced loss of long-range crystallinity. The pressures required to induce these changes are around 7 GPa for the zinc phosphates, while they are close to 21 GPa for the calcium phosphates. Hydrogenation of the metal phosphate lowers the threshold pressure by approximately 2-3 GPa in both cases. Moreover, alpha-orthophosphate of zinc could be partially amorphisized under nonisotropic pressure on copper foils.