Solid‐State NMR investigations of anhydrous proton‐conducting acid–base poly(acrylic acid)– poly(4‐vinyl pyridine) polymer blend system: A study of hydrogen bonding and proton conduction

NMR studies of the structure and dynamics of a system composed of the acidic polymer poly(acrylic acid) (PAA) and the basic polymer poly(4‐vinyl pyridine) (P4VP) are presented. This system aims at the application of anhydrous proton‐conducting membranes that can be used at elevated temperatures at which the proton conduction of hydrated membranes breaks down. The ¹H NMR measurements have been preformed under fast magic angle spinning (MAS) conditions to achieve sufficient resolution and the applied ¹H NMR methods vary from simple ¹H MAS to double‐quantum filtered methods and two‐dimensional ¹H double‐quantum spectroscopy. The dynamic behavior of the systems has been investigated via variable temperature ¹H MAS NMR. ¹³C cross‐polarization MAS NMR provides additional aspects of dynamic and structural features to complete the picture. Different types of acidic protons have been identified in the studied PAA‐P4VP systems that are nonhydrogen‐bonded free acidic protons, hydrogen‐bonded dicarboxylic dimers, and protons forming hydrogen bonds between carboxylic protons and ring nitrogens. The conversion of dimer structures in dried PAA to free carboxylic acid groups is accomplished at temperatures above 380 K. However, the stability of hydrogen‐bonding strongly depends on the hydration level of the polymer systems. The effect of hydration becomes less apparent in the complexes. An inverse proportionality between hydrogen‐bonding strength and proton conduction in the PAA‐P4VP acid–base polymer blend systems was established. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 138–155, 2009     

Ring-opening polymerization of gold macrocycles and self-assembly of a coordination polymer through hydrogen-bonding

The equilibrium between digold and tetragold rings and a ring-opened oligomer and polymer is established by NMR and ESI-MS studies in solution and by structure determinations in the solid state; the polymer containing amide-derivatized ligands undergoes self-assembly through hydrogen bonding to give an ordered network.     

Solid state nuclear magnetic resonance studies of hydroxypropylmethylcellulose acetyl succinate polymer,a useful carrier in pharmaceutical solid dispersions

Hydroxypropylmethylcellulose (HPMC) acetyl succinate (HPMC-AS) is a key polymer used for the enablement of amorphous solid dispersions (ASDs) in oral solid dosage forms. Choice of the appropriate grade within the material is often made empirically by the manufacturer of small-scale formulations, followed by extensive real time stability. A key factor in understanding and predicting the performance of an ASD is related to the presence of hydrogen (or other) bonds between the polymer and active pharmaceutical ingredient (API), which will increase stability over the parameters captured by miscibility and predicted by the Gordon–Taylor equation. Solid state nuclear magnetic resonance (NMR) is particularly well equipped to probe spatial proximities, for example, between polymer and API; however, in the case of HPMC-AS, these interactions have been sometimes difficult to identity as the carbon-13 NMR spectra assignment is yet to be firmly established. Using feedstock, selectively substituted HPMC polymers, and NMR editing experiments, we propose here a comprehensive understanding of the chemical structure of HPMC-AS and a definitive spectral assignment of the ¹³C NMR spectra of this polymer. The NMR data also capture the molar ratios of the acetate and succinate moieties present in HPMC-AS of various grades without the need for post treatment required by chromatography methods commonly use in pharmacopoeia. This knowledge will allow the prediction and measurement of interactions between polymers and APIs and therefore a rational choice of polymer grade to enhance the solid state stability of ASDs.     

Multinuclear Solid State NMR for the Study of Chemistry in Surface Science

This presentation will cover recent progress in the development and application of solid-state NMR techniques for characterizing surface chemistry. Several technological important systems, such as "ship-in-a-bottle" synthesis in zeolite, chemical immobilization on polymer surface and environmental pollutant-soil interactions, have been investigated by multinuclear solid- state NMR spectroscopy. An in situ sold-state NMR technique, GRASSHopper, has been introduced to study heterogeneous catalysis under flowing conditions.     

Investigation of drug release and 1H‐NMR analysis of the in situ forming systems based on poly(lactide‐co‐glycolide)

In situ forming biodegradable polymeric systems loaded with betamethasone (BTM) and betamethasone acetate (BTMA) were prepared using poly(DL ‐lactide‐co‐glycolide) (PLGA), ethyl heptanoate (EH), and N‐methyl‐2‐pyrrolidone (NMP) as the biodegradable polymer, additive, and solvent, respectively. The drug release studies were carried out in buffer (pH = 7.4, 37°C) using high performance liquid chromatography (HPLC). ¹H‐NMR was used to determine the polymer degradation behavior, release mechanism, and interactions between the polymer and drug. The ¹H‐NMR spectra showed that all interactions between the polymer and drug were hydrogen bonding. Hydroxyl groups and fluorine in drugs were involved in hydrogen bonding with PLGA polymer. In ¹H‐NMR studies, we found that the degradation rate in the systems loaded with BTMA was higher than the systems loaded with BTM because BTMA is only slightly soluble and accelerates the hydrolysis of PLGA chains. The formulations loaded with BTM had obviously lower burst release compared with BTMA loaded samples. With respect to ¹H‐NMR spectra, the mechanism of BTM release is controlled by two effective factors: solvent removal and polymer degradation. Copyright © 2008 John Wiley & Sons, Ltd.     

Main-chain,syndioregic, high-glass transition temperature polymer for nonlinear optics: Synthesis and characterization

A new main-chain syndioregic (head-to-head) NLO polymer was synthesized. The glass transition temperature of high molecular weight polymer was found to be 208°C, and the polymer has minimal weight loss at temperatures to at least 250°C owing to the incorporation of hydrogen bonding moieties and rigid bridging groups. The polymer was further characterized using nuclear magnetic resonance (NMR) and Fourier transform infrared spectroscopy (FTIR). The study of the nonlinear optical properties of this polymer are in progress. © 1993 John Wiley & Sons, Inc.     

Biocomplementary interaction behavior in DNA‐like and RNA‐like polymers

A series of nucleobased polymers and copolymers were synthesized through atom transfer radical polymerization (ATRP). Biocomplementary DNA‐ and RNA‐like supramolecular complexes are formed in dilute DMSO solution through nucleobase recognition. ¹H NMR titration studies of these complexes in CDCl₃ indicated that thymine‐adenine (T‐A) and uracil‐adenine (U‐A) complexes form rapidly on the NMR time scale with high association constants (up to 534 and 671 M^–1, respectively) and result in significant T_g increase. WAXD and differential scanning calorimetry analyzes in the bulk state indicate the presence of highly physical cross‐linked structures and provide further details into the nature of the self‐assembly of these systems. Furthermore, this study is of discussion on the difference in the hydrogen bond strength between T‐A and U‐A base pairs within polymer systems, indicating that the strength of hydrogen bonds in RNA U‐A pairs is stronger than that in DNA T‐A base pairs. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6388–6395, 2009     

Polyamine polymers from pyrrole,formalin, and amines by use of the mannich reaction

It was found that pyrrole, one of the active hydrogen compounds, easily condensed with formalin and amine in the presence of acid catalyst to yield a new type of polyamine polymer containing pyrrole nuclei in the main chain of the polymer. This polymerization method was also confirmed to be applicable to the other active hydrogen compounds, such as N-methylaniline, acetone, malononitrile, and hydroquinone. The structures of the polymers obtained were determined by infrared NMR and elementary analyses. We named this reaction a Mannich polymerization and the polymers obtained the Mannich base polymer.     

Direct probing of sorbent-solvent interactions for amylose tris(3,5-dimethylphenylcarbamate) using infrared spectroscopy, X-ray diffraction, solid-state NMR, and DFT modeling

The sorbent-solvent interactions for amylose tris(3, 5-dimethylphenylcarbamate) (ADMPC) with five commonly used solvents, hexane, methanol, ethanol, 2-propanol (IPA), and acetonitrile (ACN), are studied using attenuated total reflection infrared spectroscopy (ATR-IR) of thin sorbent films, X-ray diffraction (XRD) of thin films, (13)C cross polarization/magic angle spinning (CP/MAS) and MAS solid state NMR of polymer-coated silica beads (commercially termed "Chiralpak AD"), and DFT modeling. The ADMPC-polymer-coated silica beads are used commercially for analytical and preparative scale separations of chiral enantiomers. The polymer forms helical rods with intra- and inter-rod hydrogen bonds (H-bonds). There are various nm-sized cavities formed between the polymer side-chains and rods. The changes in the H-bonding states of the C=O and NH groups of the polymer upon absorption of each of the five solvents at 25 degrees C are determined with ATR-IR. The IR wavenumbers, the H-bonding interaction energies, and the H-bonding distances of the polymer side-chains with each of the solvent molecules are predicted using the DFT/B3LYP/6-311+g(d,p) level of theory. The changes in the polymer crystallinity upon absorption of each solvent are characterized with XRD. The changes in the polymer crystallinity and the H-bonding states of C=O groups are also probed with (13)C CP/MAS solid-state NMR. The changes in the polymer side-chain mobility are detected using (13)C MAS solid-state NMR. The H-bonding states of the polymer change upon absorption of each polar solvent and usually result in an increase in the polymer crystallinity and the side-chain mobility. The polymer rods are reorganized upon solvent absorption, and the distance between the rods increases with the increase in the solvent molecular size. These results have implications for understanding the role of the solvent in modifying the structure and behavior of the polymer sorbents.     

Comparative study of the hydration systems formed during interactions of hydrogen phosphate dianions with putrescine, nor-putrescine and magnesium dications

A comparative study of hydration systems, formed as a result of the interaction between hydrogen phosphate dianions and three naturally occurring cations (putrescine (Put), its nor-homologue (nPut) and magnesium), is presented. On the basis of X-ray data and IR, NMR and calorimetric measurements, we have determined how the structure and physicochemical properties of the cations influence the system of phosphate residue hydration. Our study demonstrates that the stability of the hydration systems depends not only on the character of the bonds used by water to link with other salt components (coordinate or hydrogen bonds), but also on the location of the water molecules in the crystal lattice. In addition, contrary to magnesium salts, the dehydration of diamine (Put and nPut) hydrogen phosphates is reversible. Both dehydration and rehydration processes take place in the solid state. During rehydration, the crystalline anhydrous salt absorbs water molecules from the atmosphere. This leads to the reconstruction of the hydrated salt structure; this means that the salt which is the product of rehydration is identical with that obtained by crystallization from water solution.     

Loading‐Dependent Structural Model of Polymeric Micelles Encapsulating Curcumin by Solid‐State NMR Spectroscopy

Detailed insight into the internal structure of drug‐loaded polymeric micelles is scarce, but important for developing optimized delivery systems. We observed that an increase in the curcumin loading of triblock copolymers based on poly(2‐oxazolines) and poly(2‐oxazines) results in poorer dissolution properties. Using solid‐state NMR spectroscopy and complementary tools we propose a loading‐dependent structural model on the molecular level that provides an explanation for these pronounced differences. Changes in the chemical shifts and cross‐peaks in 2D NMR experiments give evidence for the involvement of the hydrophobic polymer block in the curcumin coordination at low loadings, while at higher loadings an increase in the interaction with the hydrophilic polymer blocks is observed. The involvement of the hydrophilic compartment may be critical for ultrahigh‐loaded polymer micelles and can help to rationalize specific polymer modifications to improve the performance of similar drug delivery systems.     

Effect and Mechanism of Solvent Properties on Solution Behavior and Films Condensed State Structure for the Semi-rigid Conjugated Polymers

Solvents have an essential association with polymer solution behavior. However, few researches have been deeply done on this respect. In recent years, our research group focus on the study on effect of solvent properties on solution behavior and film condensed state structure for semi-rigid conjugated polymer up till to apply for optoelectronic device. Herein, influence of solvent properties including solubility of solvent, aromaticity, polarity and hydrogen bonds on semi-rigid polymer chain sol...     

主链含双层倍半硅氧烷的C_2-对称双脯氨酰胺手性聚合物催化剂的合成及在不对称Aldol反应中的应用

以双夹板形的笼型倍半硅氧烷(DDSQ)和叔丁基氧羰基(Boc)保护的C2-对称双脯氨酰胺为底物,通过硅氢加成反应和脱Boc反应,制得主链含DDSQ的C2-对称双脯氨酰胺手性聚合物催化剂;对其化学结构、分子量及热失重性能进行了表征.将制备的聚合物催化剂应用于催化不对称Aldol反应,探讨了其催化性能.结果表明,催化产物均具有较高的产率和立体选择性,且该催化剂便于分离纯化,循环使用6次后催化活性未见明显下降.     

Multidimensional solid‐state NMR of structure and dynamics of polymers

New developments in high‐resolution multidimensional NMR of solids are described. Special emphasis is placed on double‐quantum (DQ) methods employing fast magic angle spinning (MAS). This new technique allows structural elucidation with atomistic resolution including hydrogen positions in non‐crystalline materials and the determination of the anisotropy of chain motions by probing residual dipolar couplings between adjacent groups along a macromolecule. Specific examples include hydrogen bonded systems, columnar structures with π‐π interactions, polymer melts and block copolymers.     

Polymorphism of N,N'-diacetylbiuret studied by solid-state 13C and 15N NMR spectroscopy, DFT calculations, and X-ray diffraction

The molecular configuration and crystal structure of solid polycrystalline N,N′′‐diacetylbiuret (DAB), a potential nitrogen‐rich fertilizer, have been analyzed by a combination of solid‐ and liquid‐state NMR spectroscopy, X‐ray diffraction, and DFT calculations. Initially a pure NMR study (“NMR crystallography”) was performed as available single crystals of DAB were not suitable for X‐ray diffraction. Solid‐state ¹³C NMR spectra revealed the unexpected existence of two polymorphic modifications (α‐ and β‐DAB) obtained from different chemical procedures. Several NMR techniques were applied for a thorough characterization of the molecular system, revealing chemical shift anisotropy (CSA) tensors of selected nuclei in the solid state, chemical shifts in the liquid state, and molecular dynamics in the solid state. Dynamic NMR spectroscopy of DAB in solution revealed exchange between two different configurations, which raised the question, is there a correlation between the two different configurations found in solution and the two polymorphic modifications found in the solid state? By using this knowledge, a new crystallization protocol was devised which led to the growth of single crystals suitable for X‐ray diffraction. The X‐ray data showed that the same symmetric configuration is present in both polymorphic modifications, but the packing patterns in the crystals are different. In both cases hydrogen bonds lead to the formation of planes of DAB molecules. Additional symmetry elements, a two‐fold screw in the case of α‐DAB and a c‐glide plane in the case of β‐DAB, lead to a more symmetric (α‐DAB) or asymmetric (β‐DAB) intermolecular hydrogen‐bonding pattern for each molecule.     

(15)N and (13)C high-resolution solid-state NMR study of the polymorphism of the L-enantiomer of N-benzoylphenylalanine

In this paper, several approaches which allow the investigation of mixtures of polymorphs, employing modern solid-state NMR (SS NMR) spectroscopy are reported. A convenient methodology for characterization of the hydrogen bonding and molecular conformation of a polymorphic sample by means of one-dimensional and two-dimensional, 13C and 15N NMR experiments as well as CSA tensor analysis and theoretical calculations is presented. Two-dimensional heteronuclear SS NMR allowed definition of the polymorphic domain of N-benzoyl-L-phenylalanine (N-Bz-Phe). The graphical method of Herzfeld and Berger was used to measure the 13C and 15N spinning sideband intensities which allowed the calculation of NMR parameters for labeled centers of N-Bz-Phe. The experimental data were compared with computed results obtained by means of the DFT hybrid method with B3PW91 functional and 6-311++G** basis set.     

Structure,dynamics and interactions in polymer systems as studied by NMR spectroscopy

The possibilities of NMR spectroscopy in studies of interactions in polymer systems are demonstrated on the example of two types of macromolecular complexes: (i) By measuring ¹H NMR high resolution line intensities, the formation of ordered associated structures of syndiotactic (s) poly(methyl methacrylate)(PMMA) in mixed solvents was quantitatively characterized. The obtained results permit us to assume that the mechanism by which the solvent affects self-association of s-PMMA involves specific interactions of the solvent molecules with PMMA units. Solid state high resolution ¹³C NMR spectra of associated s-PMMA gels were also measured and compared with the spectra of a solid s-PMMA sample. (ii) By using ¹³C solid state NMR spectroscopy, the differences in the structure of the amorphous and crystalline phases in pure poly(ethylene oxide) and its complexes with p-dichlorobenzene or p-nitrophenol were characterized. Prounounced differences also in the dynamic structure of the crystalline phase in these systems are indicated by the relaxation times T₁(C), T_1ρ(C) and T_1ρ(H).     

Proton magnetic relaxation study of the thermodynamic characteristics of water adsorbed by cellulose fibers

The possibility of determining the thermodynamic parameters that characterize the sorption properties of cellulose and the state of water associated with its fibers is demonstrated using modern concepts of the structure of this vegetable polymer and methods based on theories of adsorption and NMR relaxation in heterogeneous systems.     

Preparation, characterization and in vitro dissolution studies of solid systems of valdecoxib with chitosan

In the present study, the solubilizing and amorphizing properties of Valdecoxib (a poorly water soluble anti inflammatory drug) with low molecular weight chitosan (a polymer), have been investigated. Binary systems of varying drug/polymer ratios were prepared using different techniques (physical mixing, co-grinding, kneading) and were tested for dissolution. Drug carrier interactions were investigated in both the liquid and solid state, by phase solubility analysis, differential scanning calorimetry, powder X-ray diffractrometry, FT-IR spectroscopy and scanning electron microscopy. The solubility of the drug increased with increasing polymer concentration showing A(N) type phase solubility diagram. Differential scanning calorimetry, powder X-ray diffractrometry and scanning electron microscopic studies of binary systems suggested generation of amorphous form of drug (in kneading and co ground mixtures). IR spectroscopy revealed the presence of hydrogen bonding in kneading and co ground mixtures. Drug dissolution was improved with increasing the polymer concentration in the mixture (Kneaded>co ground>physical mixture), which was attributed to the amorphonization and/or decreased drug crystallinity, size and polymer wetting effect. Enhanced dissolution combined with its direct compression feasibility and anti ulcerogenic action results in low molecular weight chitosan for developing fast release oral solid dosage forms of valdecoxib.     

Hydrogen bonding and chemical shift assignments in carbazole functionalized isocyanides from solid-state NMR and first-principles calculations

Carbazole functionalized polyisocyanides are known to exhibit excellent electronic properties (E. Schwartz, et al., Chemistry of Materials, 2010, 22, 2597). The functionalities and properties of such materials crucially depend on the organization and stability of the polymer structure. We combine solid-state Nuclear Magnetic Resonance (NMR) experiments with first-principles calculations of isotropic chemical shifts, within the recently developed converse approach, to rationalize the origin of isotropic chemical shifts in the crystalline monomer l-isocyanoalanine 2-(9H-carbazol-9-yl) ethyl amide (monomer 1) and thereby gain insight into the structural organization of its polymer (polymer 2). The use of state-of-the-art solid-state NMR experiments combined with Density Functional Theory (DFT) based calculations allows an unambiguous assignment of all proton and carbon resonances of the monomer. We were able to identify the structure stabilising interactions in the crystal and understand the influence of the molecular packing in the crystal structure on the chemical shift data observed in the NMR spectra. Here the Nuclear Independent Chemical Shift (NICS) approach allows discriminating between 'physical' interactions amongst neighboring molecules such as ring-current effects and 'chemical' interactions such as hydrogen bonding. This analysis reveals that the isocyanide monomer is stabilized by multiple hydrogen bonds such as a bifurcated hydrogen bond involving -N-H, -C-H and O=C- moieties and Ar-H···C≡N- hydrogen bonding (Ar = aromatic group). Based on the geometrical arrangement it is postulated that the carbazole units are involved in the weak σ-π interactions giving rise to a Herringbone packing of the molecules. The chemical shift analysis of the polymer spectra readily establishes the existence of N-H···O=C hydrogen bonds despite the limited resolution exhibited by the polymer spectra. It is also elucidated that the relative arrangement of the carbazole units in the polymer differs significantly from that of the monomer.