Laser interference‐based technique for dynamic measurement of single cell deformation manipulated by optical tweezers

A laser interference‐based method was proposed to measure the deformation response of cell manipulated by optical tweezers. This method was implemented experimentally by integrating a laser illuminating system and optical tweezers with an inverted microscope. Interference fringes generated by the transmitted and reflected lights were recorded by a complementary metal oxide semiconductor camera. From the acquired images, cell height was calculated and cell morphology was constructed. To further validate this method, the morphological analyses of HeLa cells were performed in static state and during detachment process. Subsequently, the dynamic deformation responses of red blood cells were measured during manipulation with optical tweezers. Collectively, this laser interference‐based method precludes the requirement of complex optical alignment, allows easy integration with optical tweezers, and enables dynamic measurement of cell deformation response by using a conventional inverted microscope.     

Cell separation by the combination of microfluidics and optical trapping force on a microchip

We investigated properties of cells affecting their optical trapping force and successfully established a novel cell separation method based on the combined use of optical trapping force and microfluidics on a microchip. Our investigations reveal that the morphology, size, light absorption, and refractive index of cells are important factors affecting their optical trapping force. A sheath flow of sample solutions created in a microchip made sample cells flow in a narrow linear stream and an optical trap created by a highly focused laser beam captured only target cells and altered their trajectory, resulting in high-efficiency cell separation. An optimum balance between optical trapping force and sample flow rate was essential to achieve high cell separation efficiency. Our investigations clearly indicate that the on-chip optical trapping method allows high-efficiency cell separation without cumbersome and time-consuming cell pretreatments. In addition, our on-chip optical trapping method requires small amounts of sample and may permit high-throughput cell separation and integration of other functions on microchips. Figure Optical trapping in a microchannel allows high-efficiency separation of cells, e.g., dead and live HeLa cells

The elastic properties of single double-stranded DNA chains of different lengths as measured with optical tweezers

Optical tweezers are microscopic tools with extraordinary precision in the determination of the position (±2 nm) of a colloid (diameter: ∼2.0 μm) in 3D-space and in the measurement of small forces in the range between 0.1 and 100 pN (pN=10⁻¹² N). Experiments are reported in which single double-stranded (ds)-DNA chains of different length [2,000 base pairs (bp), 3,000, 4,000, and 6,000 bp] are spanned between two colloidal particles by use of appropriate molecular linkers. For the forces applied (≤40 pN) a fully reversible and well reproducible force–extension dependence is found. The data can be well described by both the worm-like chain model or by an approach developed by R. G. Winkler. For the resulting persistence length, a pronounced dependence on the ionic concentration in the surrounding medium is found.     

Microrheology with optical tweezers: peaks & troughs

Since their first appearance in the 1970s, optical tweezers have been successfully exploited for a variety of applications throughout the natural sciences, revolutionising the field of microsensing. However, when adopted for microrheology studies, there exist some peaks and troughs on their modus operandi and data analysis that I wish to address and possibly iron out, providing a guide to future rheological studies from a microscopic perspective.     

A method for an approximate determination of a polymer-rich-domain concentration in phase-separated poly(N-isopropylacrylamide) aqueous solution by means of confocal Raman microspectroscopy combined with optical tweezers

The paper demonstrates that a confocal Raman microspectroscope combined with optical tweezers is a promising technique to estimate polymer concentration in polymer-rich domain in phase-separated-aqueous polymer solution. The sample polymer is poly-(N-isopropylacrylamide) (PNIPAM) that is well-known as a representative thermo-responsive polymer. Optical tweezers can selectively trap the polymer-rich domain at the focal point in non-contact and non-intrusive modes. Such situation allows us to determine polymer concentration in the domain, which has been unclear due to a lack of appropriate analytical technique. It is applicable for a variety of other thermo-responsive polymers.     

Analysis of subcellular surface structure, function and dynamics

Analytics of single biological cells allows quantitative investigation from a structural, functional and dynamical point of view and opens novel possibilities to an unamplified subcellular analysis. In this article, we report on three different experimental methods and their applications to single cellular systems with a subcellular sensitivity down to the single molecule level. First, the subcellular surface structure of living bacteria (Corynebacterium glutamicum) was investigated with atomic force microscopy (AFM) at the resolution of individual surface layer (S-layer) proteins; discrimination of bacterial strains that lack the expression of hexagonally packed surface layer proteins was possible. Second, quantitative measurement of individual recognition events of membrane-bound receptors on living B-cells was achieved in single cell manipulation and probing experiments with optical tweezers (OT) force spectroscopy. And third, intracellular dynamics of translocating photoactivatable GFP in plant protoplasts (Nicotiana tabacum BY-2) was quantitatively monitored by two-photon laser scanning microscopy (2PLSM).     

Recent advances in optical manipulation of cells and molecules for biological science

Noninvasive and nondestructive techniques for monitoring and manipulating cells or biomolecules are essential for understanding biological processes. Optical methodologies have been used for the noninvasive and nondestructive monitoring of intracellular molecules and manipulation of cellular activities to elucidate the localization and interactions of these biomolecules. Since the pioneering work of Ashkin, optical trapping has been used to study cellular elasticity and mechanical characteristics of intracellular molecules. In recent years, there has been a substantial amount of research on the optical manipulation of nanometer-sized objects, including the manipulation of the assembly of nanomaterials and the enhancement of optical forces with optical resonance effects. In the study of biomolecular manipulation by optical forces, the functions and roles of biomolecules have been clarified by analyzing the changes in cellular functions induced by manipulation. In this review, we focus on recent studies on optical trapping for the manipulation of living cells or biomolecules and introduce techniques for the manipulation of cellular functions using optical forces.     

Novel tuneable optical elements based on nanoparticle suspensions in microfluidics

This work demonstrates the application of dielectrophoretic (DEP) control of silica nanoparticles to form tuneable optical elements within a microfluidic system. The implementation consisted of a microfluidic channel with an array of curved microelectrodes along its base. Various DEP conditions were investigated at alternating current voltage amplitudes, flow rates and frequencies from 5 to 15 V, 2 to 10 μL/min and 0 to 20 MHz, respectively. The fluid channel was filled with deionized water suspending silica particles with diameters of 230 and 450 nm. Experiments were conducted to demonstrate DEP concentration and deflection of the particles and the impact of these particles distributions on the optical transmission through the fluid channel. Both confinement and scattering of the light were observed depending on the particle dimensions and the parameters of the DEP excitation. The results of this investigation illustrate the feasibility of DEP control in an optofluidic system and represent a significant step toward the dynamic formation of electrically controlled liquid optical waveguides.     

Toward room-temperature optical manipulation of small molecules

Room-temperature optical manipulation of small molecules is a challenging issue in the field of material science. To increase optical force for a single molecule trapping, it has been recognized that resonant excitation of molecules should be controlled under the light illumination. Strongly interacting molecules with solid surfaces at electrified interfaces show the exotic behavior of electronic excitation by localized surface plasmon. In this review, we emphases that surface-enhanced Raman scattering can be used to evaluate the resonant excitation of target molecules at interfaces. Under such excitation, the diffusion of small molecules can be controlled by the optical force generated by the intensity gradient of a highly localized electric field.     

Controlled optical manipulation and sorting of nanomaterials enabled by photonic and plasmonic nanodevices

Precise manipulation and sorting of nanomaterials cannot rely on techniques used for micro- and macro-scale objects because of their nanoscale size, which is smaller than the diffraction limit, and their fast Brownian diffusion. To overcome the limitations of standard optical tweezers, new techniques have recently emerged that make use of optical forces acting on nanomaterials in the vicinity of photonic and plasmonic nanostructures. This review focuses on the techniques that have been recently developed to either optically transport, sort, trap, rotate, assemble, or deposit nanomaterials using photonic or plasmonic devices. The first part is dedicated to the optical transport and sorting of nanomaterials using photonic waveguides. The second part provides an overview of the recent work on optical trapping and manipulation of nanomaterials using photonic and plasmonic nanoresonators. The third part provides a short summary of recent work on optical trapping and manipulation using metalenses and metasurfaces. This review aims to highlight some specific functionalities enabled by photonic and plasmonic devices that make it possible to tailor the optical forces acting on nanomaterials.     

Preparation, structural, and optical features of two-dimensional cross-linked DNA/gold-nanoparticle conjugates

The formation and the optical features of two-dimensional aggregates formed by DNA-directed immobilization and cross-linking of bifunctional DNA–gold nanoparticles at flat gold substrates are analyzed. The samples are structurally characterized by atomic force microscopy to evaluate the particle size, the particle densities, and the degree of aggregation. The optical characteristics determined by UV/visible measurements are correlated with the structural features observed.

Dielectrophoresis force spectroscopy for colloidal clusters

Optical trapping-based force spectroscopy was used to measure the frequency-dependent DEP forces and DEP crossover frequencies of colloidal polymethyl methacrylate spheres and clusters. A single sphere or cluster, held by an optical tweezer, was positioned near the center of a pair of gold-film electrodes where alternating current elecroosmosis flow was negligible. Use of amplitude modulation and phase-sensitive lock-in detection for accurate measurement of the DEP force yielded new insight into dielectric relaxation mechanisms near the crossover frequencies. On one hand, the size dependence of the DEP force near the crossover frequencies indicates that the dominant polarization mechanism is a volume effect. On the other hand, the power-law dependence of the crossover frequency on the particle radius with an exponent of -2 indicates the dielectric relaxation is more likely because of ionic diffusion across the particle surface, suggesting the dominant polarization mechanism may be a surface polarization effect. Better theories are needed to explain the experiment. Nevertheless, the strong size dependence of the crossover frequencies suggests the use of DEP for size sorting of micron-sized particles.     

An optical tweezers-based immunosensor for detection of femtomoles-per-liter concentrations of antigens

We used optical tweezers—optical trapping with focused laser beams—to pull microspheres coated with antigens off of an antibody-coated surface. Using this technique, we could quantify the force required to separate antigen to antibody bonds. At very low surface density of antigen, we were able to detect the single antigen to antibody binding. The force required to break the antigen-antibody bonds and pull the microsphere off the surface was shown to increase monotonically with increasing surface density of antigens. Using the force determination as a transducer, we were able to detect concentrations of free antigens in solution as small as 10⁻¹⁵ mol/L in a competitive binding assay.     

Mechanical property analysis of stored red blood cell using optical tweezers

The deformation of human red blood cells subjected to direct stretching by optical tweezers was analyzed. The maximum force exerted by optical tweezers on the cell via a polystyrene microbead 5 μm in diameter was 315 pN. Digital image correlation (DIC) method was introduced to calculate the force and the deformation of the cell for the first time. Force–extension relation curves of the biconcave cell were quantitatively assessed when erythrocytes were stored in Alsever's Solution for 2 days, 5 days, 7 days and 14 days respectively. Experiment results demonstrated that the deformability of red blood cells was impaired with the stored time.     

Spinel lithium titanate anode/polyether sulfone nanocomposite synthesized by pulsed laser ablation method for optoelectronic applications

Nowadays, to increase the usage of energy storage applications like electric cars or stationary storage, the cost of these manufacturers must be reduced. Our present study focuses on an alternate electrode production approach to suit the needs of today's lithium ion battery’s cost efficiency by using an eco-friendly method, the pulsed laser ablation method in liquid media technique, which was used for the first time to synthesize spinel lithium titanate anode, Li₄Ti₅O₁₂ nanoparticles (LTO NPs), and incorporate them with polyether sulfone (PES) in just one step to form a PES/LTO nanocomposite. The evidence from XRD showed that the nanocomposite film is formed as a crystalline phase from a cubic spinel structure corresponding to LTO, with crystalline sizes around 9.4 nm. Furthermore, SEM revealed a semi-spherical distribution of LTO NPs throughout the PES matrix. Also, the elemental analysis provides the elemental peaks for C, S, Ti, and O, and no other elemental peaks do, confirming their purity. Moreover, the FT-IR investigation affirmed the interaction between PES and LTO NPs via the sulfone group with the breakage of the sulfur and oxygen double bond and the formation of a new link between SOLa and SOTi that may be responsible for the emergence of this band. Also, the absorption study confirmed the formation of localized states between occupied and unoccupied molecular orbital bands is made feasible by the chemical linkages between PES chains and LTO NPs. As a result of the dielectric investigation, LTO NPs are a good choice for usage as dopants to enhance the electrical characteristics of PES polymer. Overall, the PES/LTO nanocomposite films' improved dielectric and optical properties make them appropriate for energy storage applications.     

Orthogonal optical force separation simulation of particle and molecular species mixtures under direct current electroosmotic driven flow for applications in biological sample preparation

Presented here are the results from numerical simulations applying optical forces orthogonally to electroosmotically induced flow containing both molecular species and particles. Simulations were conducted using COMSOL v4.2a Multiphysics® software including the particle tracking module. The study addresses the application of optical forces to selectively remove particulates from a mixed sample stream that also includes molecular species in a pinched flow microfluidic device. This study explores the optimization of microfluidic cell geometry, magnitude of the applied direct current electric field, EOF rate, diffusion, and magnitude of the applied optical forces. The optimized equilibrium of these various contributing factors aids in the development of experimental conditions and geometry for future experimentation as well as directing experimental expectations, such as diffusional losses, separation resolution, and percent yield. The result of this work generated an optimized geometry with flow conditions leading to negligible diffusional losses of the molecular species while also being able to produce particle removal at near 100% levels. An analytical device, such as the one described herein with the capability to separate particulate and molecular species in a continuous, high‐throughput fashion would be valuable by minimizing sample preparation and integrating gross sample collection seamlessly into traditional analytical detection methods.     

Enhancement on the structural,functional, optical and morphological properties of temperature treated silver sulfide nanostructures

The Silver Sulfide (Ag₂S) nanostructures were synthesized via the facile co-precipitation method. Thorough study and analysis were carried out to reveal and compare the structural, optical, functional, and morphological characteristics of as-synthesized samples annealed at various temperatures. The XRD analysis characterized the structural properties of Ag₂S nanoparticles, which unveiled the excellent crystallinity and monoclinic structure. The as-synthesized samples show an average crystallite size of 52 nm–41.7 nm. The modes of vibration and peak position of metal sulfides in Ag₂S nanoparticles were investigated through the FTIR technique. The optical attributes of prepared samples were scrutinized using UV–Vis analysis, which portrays the cut-off wavelength in the range of 1192–1223 nm for non-annealed and annealed Ag₂S nanoparticles, alongside the optical band gap is about 0.86 eV–0.96 eV. This work elucidates a novel approach to synthesis and scrutinises the characteristics of Ag₂S nanoparticles by subjecting them to distinct annealing temperatures precisely, as-prepared, 200 °C and 400 °C.     

Assessment of nanoparticle loading and dispersion in polymeric materials using optical coherence tomography

The inclusion of small concentrations of nanoparticles can significantly enhance the thermal and electrical properties, and to a lesser degree the mechanical performance, of polymers. Dispersion of nanoparticles during mixing is problematic, with poor mixing resulting in particle agglomeration (i.e. particle clustering), which subsequently limits the potential for property enhancement. Achieving good dispersion is considered key to large-scale production and commercialization of polymer nanocomposites (PNCs), and a measurement technique capable of quantitatively characterizing particle loading and dispersion would significantly enhance product development. This paper presents the results of a study using a static light scattering technique, Fourier domain optical coherence tomography (FD-OCT), for discriminating between different particle loadings and levels of dispersion. The technique has been applied to a range of PNCs including epoxy resins reinforced with nanoclay platelets, silica microspheres or multi-walled carbon nanotubes (MWCNTs), and zinc oxide and lithium aluminate reinforced polypropylene.     

Assessment of nanoparticle loading and dispersion in polymeric materials using optical wavefront correlation

Small concentrations (≤5 wt. %) of nanoparticles in polymeric materials can potentially result in improvements in material properties and functionality. However, poor or non-uniform particle dispersion resulting in clustering (agglomeration) in polymer nanocomposites (PNCs) limits the potential for property enhancement. Achieving good dispersion is considered essential for large-scale production and commercialization of PNCs. New and effective measurement techniques capable of quantitatively characterizing particle loading and dispersion would significantly contribute towards understanding and optimizing the material performance of PNCs and, consequently, play a pivotal role in product development. This paper presents the results of a study using a static light scattering technique, optical wavefront correlation (OWC), for discriminating between different particle loadings and levels of dispersion. The technique has been applied to a range of PNCs, including epoxy resins reinforced with nanoclay platelets or silica microspheres, and zinc oxide and lithium aluminate reinforced polypropylene.     

Correlation of optical properties and temperature-induced irreversible phase transitions in europium-doped yttrium carbonate nanoparticles

Nanophase europium-doped yttrium carbonate precursors are subjected to heat treatments, ranging from 300 °C to 1100 °C for dwell times of 5 min, 30 min, and 180 min. XRD, TEM, FT-IR, fluorescence, fluorescence excitation, and fluorescence lifetime measurements are used to characterize the materials. Upon heating, the material transitions through several amorphous stages until it reaches the crystalline cubic Y₂O₃ phase. DSC measurements show an exothermic transition at 665.7 °C, indicating the formation of crystalline Y₂O₃. The grain size development is fitted by the relaxation equation and yields an activation energy of 50.3 kJ/mol. The amorphous phases are characterized by inhomogenously broadened optical spectra. Heating up to 700 °C leads to an increased fluorescence lifetime (from about 1 ms to 2.4 ms). As the material is heated to higher temperatures and completes the formation of the crystalline cubic Y₂O₃ phase, the optical spectra become narrower and the fluorescence lifetime decreases to about 1.2 ms.