Terminal bis-acetylenes derived from 1,2-bis(1<Emphasis Type="Italic">H</Emphasis>-tetrazol-5-yl)ethane

The N(1)—N(1), N(2)—N(2), and N(1)—N(2) regioisomers of 1,2-bis[(prop-2-yn-1-yl)-1H-tetrazol-5-yl]ethane were first synthesized by alkylation of 1,2-bis(1H-tetrazol-5-yl)ethane with propargyl bromide. The peculiarities of the crystal structure of 1,2-bis[1-(prop-2-yn-1-yl)-1H-tetrazol-5-yl]ethane were evaluated by X-ray diffraction analysis. This compound is readily underwent Cu-catalyzed [3+2] cycloaddition with p-tolyl azide, p-nitrophenyl azide, and benzyl azide to give heterocyclic assembles bearing 1,2,3-triazole and tetrazole cycles. Catalyst-free [3+2] cycloadditions of 1,2-bis[1-(prop-2-yn-1-yl)-1H-tetrazol-5-yl]ethane and the mixtures of the N(1)—N(1), N(2)—N(2), N(1)—N(2) regioisomers with poly(glycidyl azide) oligomers resulted in 1,2,3-triazole cycles and crosslinking of the polymer chains.     

Synthesis and characterization of serial random and block-copolymers based on lactide and glycolide

The objective of this study is to investigate the properties of poly(lactide-co-glycolide) with different composition ratios and PLGA-PEG-PLGA copolymers synthesized by ring-opening polymerization method. Their compositions, crystallization properties, thermal and degradation behaviors, hydrophilicity and biocompatibility were studied. Our results demonstrate that poly(lactide-co-glycolide) with a 90% lactide and PLGA-PEG-PLGA show some crystallization properties. While as the decrease of lactide content in polymers, poly(lactide-co-glycolide) become amorphous, whereas, their hydrophilicity have been improved on the contrary. Compared to poly(lactide-co-glycolide), the PLGA-PEG-PLGA copolymer has a better hydrophilicity for the existence of polyethylene glycol block. Furthermore, both these polymers display easy controlled degradation properties and good cell compatibility.     

Methyl (<Emphasis Type="Italic">Z</Emphasis>)-3-bromo-3-(4-methylbenzenesulfonyl)prop-2-enoate: Synthesis and reactions with dimethyl malonate and methyl acetoacetate

Bromination–dehydrobromination of methyl (E)-3-(4-methylbenzenesulfonyl)prop-2-enoate gave methyl (Z)-3-bromo-3-(4-methylbenzenesulfonyl)prop-2-enoate whose structure was determined by X-ray analysis. Methyl (Z)-3-bromo-3-(4-methylbenzenesulfonyl)prop-2-enoate behaved as a synthetic equivalent of methyl 3-(4-methylbenzenesulfonyl)prop-2-ynoate in reactions with dimethyl malonate and methyl acetoacetate, which afforded the corresponding Michael adducts, trimethyl 3-(4-methylbenzenesulfonyl)prop-1-ene-1,1,2-tricarboxylate and dimethyl (Z)-2-acetyl-3-(4-methylbenzenesulfonyl)but-2-enedioate, respectively, via nucleophilic attack on the β-position with respect to the sulfonyl group.     

Azolyl-substituted 1,2,3-triazoles

Huisgen reaction of (E)-1,5-diarylpent-2-en-4-yn-1-ones and (E)-1,5-diarylpent-1-en-4-yn-3-ones afforded 1-aryl-3-(5-aryl-1H-1,2,3-triazol-4-yl)prop-2-en-1-ones and 3-aryl-1-(5-aryl-1H-1,2,3-triazol-4-yl)-prop-2-en-1-ones, respectively. (E)-1-Aryl-3-(5-phenyl-1H-1,2,3-triazol-4-yl)prop-2-en-1-ones reacted with hydrazine hydrate and phenylhydrazine to give 72–93% of 4-(3-aryl-4,5-dihydro-1H-pyrazol-5-yl)-5-phenyl-1H-1,2,3-triazoles which underwent dehydrogenation on heating in boiling acetic acid with formation of the corresponding pyrazole derivatives. The molecular structures of (E)-3-phenyl-1-(5-phenyl-1H-1,2,3-triazol-4-yl)prop-2-en-1-one and 4-[3-(4-methylphenyl)-1-phenyl-4,5-dihydro-1H-pyrazol-5-yl]-5-phenyl-1H-1,2,3-triazole were studied by X-ray analysis. 4-(3-Aryl-4,5-dihydro-1H-pyrazol-5-yl)-5-phenyl-1H-1,2,3-triazoles showed toxicity against Daphnia magna.     

Synthesis of urethane—acrylic multi-block copolymers via electrochemically mediated ATRP

The electrochemically mediated atom transfer radical polymerisation (eATRP) of n-butyl acrylate was investigated under a variety of catalyst concentrations. Poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate) copolymers were prepared via electrochemically mediated atom transfer radical polymerisation (eATRP) using only 7 × 10^?6 mole % of Cu^II complex. The successful chain extension and formation of penta-block copolymers confirmed the living nature of the poly(alkyl acrylates) prepared by eATRP. In this work, the tri-block and penta-block urethane-acrylate copolymers were synthesised for the first time by using tertiary bromine-terminated polyurethane macro-initiators as transitional products reacting with n-butyl acrylate, and subsequently with tert-butyl acrylate in the presence of the Cu^IIBr₂/TPMA catalyst complex. The results of ¹H NMR spectral studies support the formation of tri-block poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate) copolymers, and penta-block poly(tert-butyl acrylate)-block-poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate)-block-poly(tert-butyl acrylate) copolymers.     

Cyclization of trifluoro-<Emphasis Type="Italic">N</Emphasis>-(prop-2-yn-1-yl)methanesulfonamides to <Emphasis Type="Italic">N</Emphasis>-(hydroxymethyl)-1,2,3-triazoles

Three-component heterocyclizations of trifluoro-N-(prop-2-yn-1-yl)methanesulfonamide, trifluoro-N-pheny-N-(prop-2-yn-1-yl)methanesulfonamide, and trifluoro-N,N-di(prop-2-yn-1-yl)methanesulfonamide with formaldehyde and sodium azide afforded N-{[2-(hydroxymethyl)-2H-1,2,3-triazol-4-yl]methyl}-, N-{[2-(hydroxymethyl)-2H-1,2,3-triazol-4-yl]methyl}-N-phenyl-, and N,N-bis{[2-(hydroxymethyl)-2H-1,2,3-triazol-4-yl]methyl}trifluoromethanesulfonamides as the major products together with minor 1-(hydroxymethyl)-1H-1,2,3-triazole isomers.     

Synthesis of new functionally substituted hetarylcarbamates from methyl {4-[(2<Emphasis Type="Italic">E</Emphasis>)-3-(4-methoxyphenyl)-prop-2-enoyl]phenyl}carbamate

Three-component condensation of methyl {4-[(2E)-3-(4-methoxyphenyl)prop-2-enoyl]phenyl}- carbamate with ninhydrin and L-proline in methanol–water (10: 1) afforded methyl {4-[1,3-dioxo-1′- (4-methoxyphenyl)-1,1′,2′,3,5′,6′,7′,7a′-octahydrospiro[indene-2,3′-pyrrolizin]-2′-ylcarbonyl]phenyl}carbamate. Heating of methyl {4-[(2E)-3-(4-methoxyphenyl)prop-2-enoyl]phenyl}carbamate with isatin and benzylamine in methanol gave methyl {4-[4′-(4-methoxyphenyl)-2-oxo-5′-phenyl-1,2-dihydrospiro[indole-3,2′-pyrrolidin]-3′-ylcarbonyl]phenyl}carbamate. The condensation of methyl {4-[(2E)-3-(4-methoxyphenyl)prop-2- enoyl]phenyl}carbamate with sarcosine and 11H-indeno[1,2-b]quinoxalin-11-one generated in situ from ninhydrin and o-phenylenediamine in boiling ethanol led to the formation of methyl {4-[4′-(4-methoxyphenyl)-1′-methyl-11,11a-dihydro-5aH-spiro[benzo[b]phenazine-6,2′-pyrrolidin]-3′-ylcarbonyl]phenyl}carbamate.     

Rheological behavior and reversible swelling of pH sensitive poly(acrylamide-<Emphasis Type="Italic">co</Emphasis>-itaconic acid) hydrogels

The study involved preparation of poly(acrylamide-co-itaconic acid) hydrogels by radical cross-linking copolymerization. The copolymer hydrogels were characterized through infrared spectroscopy, thermal analysis, swelling measurements and in oscillatory and steady shear rheology. Results showed that more stable copolymers were formed due to the strong interaction in the hydrogels. These hydrogels have shown substantial percent swelling in water and shrinking in saline solution and acidic buffers. The rheological properties were described by the Herschel-Bulkley and power-law models to explore their non-Newtonian behavior. The results showed that higher itaconic acid content raised the polymer viscosity; the degree of shear-thinning and polymer elasticity (G′) were also increased. The transition from the viscous (G′ < G″) to the predominant viscoelastic behavior (G′ > G″) occurs at a crossover frequency ranged from 17.8 rad/s for polyacrylamide to 15.7, 12.8 and 12.5 rad/s for copolymers.     

One-pot method for the synthesis of sulfonated poly(1,3,4-oxadiazoles) based on 4,4’-oxydibenzoic acid

A series of new copolymers of poly(1,3,4-oxadiazole) that contain side protogenic sulfo groups are synthesized by the direct copolycondensation of terephthalic and 4,4’-oxydibenzoic acids and hydrazine sulfate in oleum. Variation in the polycondensation conditions makes it possible to synthesize copolymers containing phenylene moieties with either 4-sulfo-10,10-dioxophenoxatiine or 4,4’-oxybis(3-sulfophenyl) moieties or a combination of the three moieties. This approach permits easy control over the physicochemical properties of the copolymers and the amount of protogenic sulfo groups. It is shown that the introduction of sulfonated moieties into copolymer molecules makes it possible to obtain materials with high values of ionexchange capacity (1.5 mmol/g) and water absorption (110%), while the strength and thermal stability inherent in poly(p-phenylene 1,3,4-oxadiazoles) remain intact.     

Optically isotropic mesophase in comb-shaped copolymers with side mesogenic groups

Two series of comb-shaped copolymers poly(4-(4-cyanobiphenyl-4′-yloxy)butyl acrylate)-co-(4-(6-acryloyloxyhexyl-1-oxy)isophthalic acid)) and poly(4-(6-acryloyloxyhexyl-1-oxy)benzoic acid)-co-(acrylic acid)) have been prepared by free-radical copolymerization, and their phase diagrams have been constructed. Formation of the optically isotropic phase characterized by the absence of birefringence and high optical activity has been demonstrated for a number of copolymers. At the same time, the DSC curves of these compounds show a well-defined phase transition with the heat of melting equal to 2–5 J/g. Specific features of hydrogen bonding in the copolymers have been studied by IR spectroscopy. It has been speculated that there is correlation between microphase separation between hydrophobic and hydrophilic units in the copolymers and formation of the optically isotropic mesophase.     

Comparison of changes of basic parameters of asphalt caused by various additives

This work presents a study on asphalt mixtures prepared with different kinds of additives: poly(styrene-co-butadiene-co-styrene), poly(ethylene-co-vinyl acetate), crumb rubber, fibers, zeolites and clays. The aim of this study was to determine the influence of inorganic dirt and fibers present in crumb rubber on the qualitative parameters of asphalt mixtures. The experiments showed that dynamic viscosity is the best criterion for assessing the effectiveness of the additives in asphalt mixtures. It was also found that fibers and inorganic impurities present in crumb rubber at low concentrations have a negligible effect on the characteristics of asphalt mixtures. This investigation is important in terms of determining the degree of crumb rubber devulcanization in crumb rubber-asphalt mixtures as higher crumb rubber devulcanization could bring the properties of such a mixture closer to those of asphalts modified by poly(styrene-co-butadiene-co-styrene) copolymers.     

Linear-Dendritic Block Copolymers Based on <Emphasis Type="Italic">N</Emphasis>-Isopropylacrylamide and Perfluorinated Polyphenylenegermane: Synthesis and Properties at Various Interfacial Boundaries

It is shown that linear-dendritic block copolymers poly(N-isopropylacrylamide)–block–polyphenylenegermane can be prepared by the polymerization of N-isopropylacrylamide in the presence of bis(pentafluorophenyl)germane followed by activated polycondensation with tris(pentafluorophenyl)germane. The properties of the dilute solutions and Langmuir monolayers of the functional polymers and the linear-dendritic block copolymers of N-isopropylacrylamide are studied.     

Heterocyclization of <Emphasis Type="Italic">N</Emphasis>-Hetaryl-<Emphasis Type="Italic">N</Emphasis>′-(prop-2-en-1-yl)thioureas by the action of sulfuryl chloride

Cyclization of N-hetaryl-N′-(prop-2-en-1-yl)thioureas by the action of sulfuryl chloride leads to the formation of the corresponding 2-hetarylimino-5-chloromethylthiazolidine hydrochlorides which are converted into the free bases by treatment with aqueous sodium sulfite.     

Preparation,characterization and morphological study of poly(<Emphasis Type="Italic">m</Emphasis>-toluidine-<Emphasis Type="Italic">co</Emphasis>-<Emphasis Type="Italic">m</Emphasis>-aminoacetophenone) conductive copolymer

A new series of copolymers of poly(m-toluidine-co-m-aminoacetophenone) were synthesized by the chemical oxidative method in acid medium. The copolymers were characterized by UV–Vis and FTIR spectroscopy. X-ray diffraction analysis revealed the partial crystalline nature of copolymer. The morphological study by SEM analysis indicated that the surface of the copolymer had the granular structure of agglomerated morphology with average particle size of 200 nm. The conductivity of the copolymers ranged from 2 × 10^–4 to 3.3 × 10^–8 S/cm and the conductivity decreased with the increase of comonomer concentration. The resultant copolymers showed an enhanced solubility and an improved processability when compared with pure polyaniline.     

Microwave-assisted synthesis of 1-{2-[(1-benzyl-1<Emphasis Type="Italic">H</Emphasis>-1,2,3-triazol-4-yl)methoxy]phenyl}-3-(3-aryl-1-phenyl-1<Emphasis Type="Italic">H</Emphasis>-pyrazol-4-yl)prop-2-en-1-ones and their antimicrobial activity

A series of new (E)-1-{2-[(1-benzyl-1H-1,2,3-triazol-4-yl)methoxy]phenyl}-3-(3-aryl-1-phenyl-1H-pyrazol-4-yl)prop-2-en-1-ones (3a–3i) has been synthesized via copper-catalyzed 1,3-dipolar azide-alkyne cycloaddition reaction (CuAAC) of benzyl azide with substituted (E)-3-(3-aryl-1-phenyl-1H-pyrazol-4-yl)-1-[2-(prop-2-ynyloxy)phenyl]prop-2-en-1-ones (2a–2i). The synthesized compounds have been characterized by their IR, ^lH, ¹³C NMR spectra, and mass spectroscopy data. All the compounds have been screened for antimicrobial activity.     

Fast Crystallization and Toughening of Poly(<Emphasis Type="Italic">L</Emphasis>-lactic acid) by Incorporating with Poly(ethylene glycol) as a Middle Block Chain

High molecular weight poly(L-lactic acid)-poly(ethylene glycol)-poly(L-lactic acid) (PLLA–PEG–PLLA; PLGL) triblock copolymers with various lengths of the PLLA blocks were synthesized by ringopening polymerization of L-lactide. The amorphous and crystalline PLLA and PLGL films were prepared by hot pressing with different temperature treatments. PLLA and PEG blocks exhibited good miscibility in the amorphous PLGL samples, while phase separation occurred in the crystalline ones. The flexible PEG blocks not only accelerated the crystallization rate of PLLA but also greatly improve its flexibility. The crystallization time of PLGL copolymers shorten to less than 5 min and copolymers showed much better flexibility than neat PLLA, the maximum fracture strain reached about 600% for amorphous sample. The processing time of PLLA was greatly shortened and the brittleness of material was improved.     

Effects of the architecture and environment on polymeric molecular assemblies of novel amphiphilic diblock copolynorbornenes with narrow polydispersity via living ring‐opening metathesis polymerization

Diblock copolymers of 5‐(methylphthalimide)bicyclo[2.2.1]hept‐2‐ene (NBMPI) and 1,5‐cyclooctadiene were synthesized by living ring‐opening metathesis polymerization with a well‐defined catalyst {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂}. Unhydrogenated diblock copolymers showed two glass transitions due to poly(NBMPI) and polybutadiene segments, such as two glass‐transition temperatures at ?86.5 and 115.3 °C for poly 1a and ?87.2 and 115.3 °C for poly 1b . However, only one melting temperature could be observed for hydrogenated copolymers, such as 119.8 °C for poly 2a and 121.7 °C for poly 2b . The unhydrogenated diblock copolymer with the longer poly(NBMPI) chain (poly 1a ; temperature at 10% mass loss = 400 °C) exhibited better thermal stability than the one with the shorter poly(NBMPI) chain (poly 1b ; temperature at 10% mass loss = 385 °C). Two kinds of hydrogenated diblock copolymers, poly 2a and poly 2b , exhibited relatively poor solubility but better thermal stability than unhydrogenated diblock copolymers because of the polyethylene segments. Poly[(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine)‐b‐butadiene]‐1 (poly 3a ) was obtained after the hydrolysis and quaternization of poly 1a . Dynamic light scattering measurements indicated that the hydrodynamic diameters of the cationic copolymer (poly 3a ) in water (hydrodynamic diameter = 1580 nm without salt), methanol/water (4/96 v/v; hydrodynamic diameter = 1500 nm without salt), and tetrahydrofuran/water (4/96 v/v; hydrodynamic diameter = 1200 nm without salt) decreased with increasing salt (NaCl) concentration. The effect of temperature on the hydrodynamic diameter of hydrophobically modified poly 3a was also studied. The inflection point of the hydrodynamic diameter of poly 3a was observed at various polymer concentrations around 30 °C. The critical micelle concentration of hydrophobically modified poly 3a was observed at 0.018 g dL^?1. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2901–2911, 2006     

Copolymers of <Emphasis Type="Italic">N</Emphasis>-vinyl-2-pyrrolidone and condensation polymers

The results of study on the radical polymerization of N-vinyl-2-pyrrolidone containing a dissolved polyimide, an aromatic polyamide, and a polyarylate are presented. Formation of both poly(vinylpyrrolidone) homopolymer and its copolymers with the above condensation polymers is detected. The obtained (co)polymers differ from poly(vinylpyrrolidone) in heat resistance and solubility. It was shown that polyimides can be prepared in a N-vinyl-2-pyrrolidone medium followed by in situ polymerization of the latter.     

Synthesis of (2<Emphasis Type="Italic">S</Emphasis>,3<Emphasis Type="Italic">S</Emphasis>,4<Emphasis Type="Italic">S</Emphasis>)-2,3-<Emphasis Type="Italic">O</Emphasis>-isopropylidene-4-(methoxycarbonylmethyl)cyclopentan-1-one

(2S,3S,4S)-2,3-O-Isopropylidene-4-(methoxycarbonylmethyl)cyclopentan-1-one was synthesized starting from D-ribose through methyl (Z)-3-(5-acetyl-2,2-acetoxyacetyl-2,2-dimethyl-1,3-dioxolan-4-yl)prop-2-enoate which was subjected to cyclization in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene, followed by decarboxylation.     

Effect of butyl lactate methacrylate content on the properties of acrylic acid copolymers

In the present work, the effect of butyl lactate methacrylate (BLM) content on the properties of acrylic acid (AA) copolymers was investigated. The BLM monomer was synthesized by reacting butyl lactate with methacrylic acid through azeotropic distillation method, which was confirmed by Mass spectrometric technique. Copolymers were synthesized by free-radical solution polymerization technique to obtain poly(BLM-co-AA). BLM monomer and copolymers were characterized by Fourier transform infrared (FTIR), ¹H-nuclear magnetic resonance (¹H-NMR) and proton decoupled ¹³C-NMR spectroscopic techniques. The Finemann-Ross method was used to determine the reactivity ratio of AA and BLM and the values were found to be 0.79 and 0.39, respectively. The wide angle X-ray scattering (WAXS) studies exhibited that the increase in BLM content in copolymers, shifted the amorphous halo from 21.34° to 15.39° and also increased the average molecular interchain spacing (〈R〉) from 5.20 to 7.18 Å, which was calculated from 2θ values of amorphous halo of copolymers. Moisture absorption of polymers followed Fickian absorption. Depending upon the copolymer composition, relative humidity and time, the moisture absorption of copolymers can be tuned to a wide range from 11 to 35% (wt/wt). Glass transition temperature of copolymers decreased from 106 to 72.1°C with increase in BLM content. Copolymers were thermally stable up to 150°C and thereafter exhibited three-step thermal degradation in nitrogen atmosphere. Thermal stability of copolymers can be explained on the basis of 〈R〉 value.