Effect of different dimethylphenols on the interactions with Ni2+-exchanged montmorillonite

The influence of different steric and electronic properties of 2,4-; 2,5-; and 3,5- dimethylphenols (2,4-; 2,5-; and 3,5- DMP, respectively) on Ni²⁺-montmorillonite (Ni²⁺-MMT) (I) were studied. The results of X-ray diffraction show that the observed changes of the basal spacing were due to the intercalation of phenol derivatives into the interlayer space of montmorillonite. The existence of one peak at ~1,633 cm^?1 in the IR spectra of sample Ni²⁺-MMT + 2,4-DMP (II) and Ni²⁺-MMT + 2,5-DMP (III) and shift of this peaks to higher frequency indicate that 2,4-DMP and 2,5-DMP exist in the interlayer space of Ni²⁺-MMT in the protonated form. The two bands at ~1,622 and 1,597 cm^?1 in the sample Ni²⁺-MMT + 3,5-DMP (IV) indicate that 3,5-DMP may be also directly coordinated to Ni²⁺ cations. The different interactions of phenol derivatives in the silicate interlayers will be connected with different position of methyl groups on the phenol ring.     

High-yield preparation of rod-like CaSO<Subscript>4</Subscript>/Fe<Superscript>0</Superscript> magnetic composite for effective removal of Cu<Superscript>2+</Superscript> in wastewater

In this study, a simple approach was described for the fabrication of CaSO₄/Fe⁰ composite used as a novel adsorbent for the reductive removal of Cu²⁺ from aqueous solutions. The magnetic CaSO₄/Fe⁰ composite was prepared by a solid state reaction at 550 °C in the H₂ atmosphere using CaSO₄·2H₂O/α-FeOOH as a precursor. The structure and morphology of the as-synthesized magnetic composite were characterized by X-ray diffraction, field emission scanning electron microscopy and a superconducting quantum interference device, respectively. Results showed that the CaSO₄/Fe⁰ composite with a rod-like shape could be easily acquired from the CaSO₄·2H₂O/α-FeOOH precursor with the ratio of 1:0.5 at 550 °C in the H₂ atmosphere for 1 h. The CaSO₄/Fe⁰ composite exhibited enhanced performance relevant to the reductive removal of Cu²⁺. The removal amount of Cu²⁺ increased linearly with increasing of concentration of Cu²⁺ in wastewater. Possible removal mechanisms were proposed as follows: (1) the formation of Cu₂O by fast reduction of Cu²⁺ with Fe⁰ nanoparticles on interface of CaSO₄/Fe⁰ composite, (2) proper adsorption of Cu²⁺ on the surface of CaSO₄/Fe⁰ composite, (3) the hydrous iron oxide (HIO) such as Fe (OH)₃ and FeOOH in situ generated on the rest of CaSO₄/Fe⁰ composite could further adsorb Cu²⁺ from wastewater.     

Synthesis,characterisation and photocatalytic activity of Ag<Superscript>+</Superscript>- and Sn<Superscript>2+</Superscript>-substituted KSbTeO<Subscript>6</Subscript>

Ag⁺- and Sn²⁺-substituted KSbTeO₆ were prepared by a facile ion-exchange method at ambient temperature. All the samples were characterised by scanning electron microscopy, energy-dispersive spectra, thermogravimetric analysis, powder X-ray diffraction, Raman spectra and UV-VIS diffuse reflectance spectra. Both Sn²⁺- and Ag⁺-substituted KSbTeO₆ were crystallised in a cubic lattice with the \(Fd\bar 3m\) space group. The band-gap energy of all the samples was deduced from their UV-VIS diffuse reflectance spectral profiles. The visible light-induced photocatalytic oxidation of the methylene blue (MB) dye was examined in the presence of all the as-prepared materials. The Ag⁺- and Sn²⁺-substituted KSbTeO₆ exhibited a higher photocatalytic activity than the parent KSbTeO₆ in degradation of the MB dye under visible light irradiation.     

Specific features of absorption of Cu<Superscript>2+</Superscript>, Zn<Superscript>2+</Superscript>, Co<Superscript>2+</Superscript>, and Pb<Superscript>2+</Superscript> cations from aqueous solutions by calcium phosphates

Kinetic characteristics of the interaction of trisubstituted calcium phosphate Ca₃(PO₄)₂ · xH₂O with Cu²⁺, Zn²⁺, Co²⁺, and Pb²⁺ ions in aqueous solutions were studied.     

Enhancement of the photoluminescence and long afterglow properties of Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript> phosphor by Dy<Superscript>3+</Superscript> co-doping

The Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ long afterglow phosphors were synthesized under a weak reducing atmosphere by the traditional high temperature solid state reaction method. The synthesized phosphors were characterized by powder X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) techniques. The luminescence properties were investigated using thermoluminescence (TL), photoluminescence (PL), long afterglow, mechanoluminescence (ML), and ML spectra techniques. The crystal structure of sintered phosphors was an akermanite type structure, which belongs to the tetragonal crystallography. TL properties of these phosphors were investigated, and the results were also compared. Under the ultraviolet excitation, the emission spectra of both prepared phosphors were composed of a broad band peaking at 535 nm, belonging to the broad emission band. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co-doped with Dy³⁺, the PL, afterglow and ML intensity is strongly enhanced. The decay graph indicates that both the sintered phosphors contain fast decay and slow decay process. The ML intensities of Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors were proportionally increased with the increase of impact velocity, which suggests that this phosphor can be used as sensors to detect the stress of an object.     

Effect of Ca<Superscript>2+</Superscript>, Mg<Superscript>2+</Superscript>, Fe<Superscript>3+</Superscript>, and Al<Superscript>3+</Superscript> Ions on the Deposition of Electrolytic Manganese Dioxide from Chloride Solutions

The effect of Ca²⁺, Mg²⁺, Fe³⁺, and Al³⁺ ions on the deposition of electrolytic manganese dioxide from chloride solutions was studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 5, 2005, pp. 751–754.Original Russian Text Copyright © 2005 by Kolosnitsyn, Minnikhanova, Karaseva, Dmitriev, Muratov.     

Exploring fluorescent covalent organic frameworks for selective sensing of Fe<Superscript>3+</Superscript>

Covalent organic frameworks (COFs) have been widely applied in gas capture and separation, but the fluorescent property of COFs with large π-conjugated system tends to be underexplored. Here we report the fluorescent properties of several COFs including TaTa, DhaTab, TRITER-1 and TzDa and the effect of metal ions of Na⁺, Mg²⁺, K⁺, Ca²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺, Cd²⁺ and Fe³⁺ on the fluorescence of these COFs. The results show that only Fe³⁺ significantly quenched the fluorescence of the studied COFs. The possibility of the four COFs for selective sensing of Fe³⁺ was demonstrated. The possible mechanism of the effect of Fe³⁺ on the fluorescence of the COFs was based on the absorption competition quenching.     

Interaction energies of histidine with cations (H<Superscript>+</Superscript>, Li<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, Mg<Superscript>2+</Superscript>, Ca<Superscript>2+</Superscript>)

The imidazol side group of histidine has two nitrogen atoms capable of being protonated or participating in metal binding. Hence, histidine can take on various metal-bound and protonated forms in proteins. Because of its variable structural state, histidine often functions as a key amino acid residue in enzymatic reactions. Ab initio (HF and MP2) calculations were done in modeling the cation (H⁺, Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺) interaction with side chain of histidine. The region selectivity of metal ion complexation is controlled by the affinity of the side of attack. In the imidazol unite of histidine the ring nitrogen has much higher metal ion (as well as proton) affinity. The complexation energies with the model systems decrease in the following order: Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺. The variation of the bond lengths and the extent of charge transfer upon complexation correlate well with the computed interaction energies.     

Ca<Superscript>2+</Superscript> and Mg<Superscript>2+</Superscript> incorporated barium hexaferrites: structural and magnetic properties

BaM hexaferrites substituted with both Ca²⁺ and Mg²⁺ ions, namely, Ba_1-2×Ca_xMg_xFe₁₂O₁₉ (0.0?≤?x?≤?0.1), synthesized during a sol–gel auto-combustion route. The hexaferrite phase and morphology of all samples were investigated using X-ray powder diffraction, a field emission scanning electron microscope, a high-resolution transmission microscope, and Fourier transform infrared spectroscopy. In addition, an M-type hexagonal structure was confirmed using XRD for all samples. FE-SEM and TEM revealed the shape of the hexagonal plate. Measurements of the magnetization versus the field M(H) of Ba_1-2×Ca_xMg_xFe₁₂O₁₉ (0.0?≤?x?≤?0.1) nanohexaferrites were conducted at 300 and 10?K. A hard-ferrimagnetic behavior at both 300 and 10?K was noted for the different products produced. The squareness ratio indicates the uniaxial anisotropy for various products. The deduced values of saturation magnetization (M_s) in all substituted samples are higher than in the pristine sample (x?=?0). The Ba_0.96Ca_0.02Mg_0.02Fe₁₂O₁₉ nanosized hexaferrite showed the highest values of M_s, remanence M_r, magneton number (n_B), and magnetocrystalline anisotropy constant (K_eff). In contrast, the values of the coercive field (H_c) and intrinsic coercivity (H_ci) diminish with the increase in the amount of the substituted Ca and Mg elements.

Open image in new window

     

Synthesis and properties of potassium salts of per-<Emphasis Type="Italic">O</Emphasis>-carboxymethyl-calix[4]pyrogallols and their complexes with Cu<Superscript>2+</Superscript>, Fe<Superscript>3+</Superscript>, and La<Superscript>3+</Superscript>

Synthesis of water-soluble potassium salts of carboxymethyl derivatives of calix[4]pyrogallols and dodeca(carboxylatomethyl)tetramethylcalix[4]pyrogallol (L) complexes with transition metal ions (Cu²⁺, Fe³⁺, La³⁺) is described. Their structures in the solid state and in solution were characterized by NMR spectroscopy, ESR, and IR spectroscopy. Calix[4]pyrogallol dodecacarboxylates exist in the rccc-configuration. Calix[4]pyrogallol with methyl substituents at the lower rim in a wide range concentrations exists in water predominantly in the dimeric form. The obtained polynuclear transition metal complexes possess less symmetric structure than potassium salt of calix[4]pyrogallol (K₁₂L). All studied complexes contain water molecules bound by rather strong hydrogen bonds. At room temperature the Fe₄L complex is characterized by the environment of the Fe³⁺ ions close to octahedral. The absence of signals in the ESR spectrum of the Cu₆L complex indicates the strong antiferromagnetic interaction Cu²⁺-Cu²⁺.     

Difference of Electron Capture and Transfer Dissociation Mass Spectrometry on Ni<Superscript>2+</Superscript>-, Cu<Superscript>2+</Superscript>-, and Zn<Superscript>2+</Superscript>-Polyhistidine Complexes in the Absence of Remote Protons

Electron capture dissociation (ECD) and electron transfer dissociation (ETD) in metal-peptide complexes are dependent on the metal cation in the complex. The divalent transition metals Ni²⁺, Cu²⁺, and Zn²⁺ were used as charge carriers to produce metal-polyhistidine complexes in the absence of remote protons, since these metal cations strongly bind to neutral histidine residues in peptides. In the case of the ECD and ETD of Cu²⁺-polyhistidine complexes, the metal cation in the complex was reduced and the recombination energy was redistributed throughout the peptide to lead a zwitterionic peptide form having a protonated histidine residue and a deprotonated amide nitrogen. The zwitterion then underwent peptide bond cleavage, producing a and b fragment ions. In contrast, ECD and ETD induced different fragmentation processes in Zn²⁺-polyhistidine complexes. Although the N–C_α bond in the Zn²⁺-polyhistidine complex was cleaved by ETD, ECD of Zn²⁺-polyhistidine induced peptide bond cleavage accompanied with hydrogen atom release. The different fragmentation modes by ECD and ETD originated from the different electronic states of the charge-reduced complexes resulting from these processes. The details of the fragmentation processes were investigated by density functional theory.

Open image in new window

Graphical Abstract ?

     

Extraction of metal ions (Fe<Superscript>3+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript>, Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript>) using immobilized-polysiloxane iminobis(n-2-aminophenylacetamide) ligand system

A new insoluble solid functionalized ligand system bearing chelating ligand group of the general formula P-(CH₂)₃-N[CH₂CONH(C₆H₄)NH₂]₂, where P represents [Si–O] _n polysiloxane network, was prepared by the reaction of the immobilized diethyliminodiacetate polysiloxane ligand system, P-(CH₂)₃N(CH₂CO₂Et)₂ with 1,2-diaminobenzene in toluene. ¹³C CP-MAS NMR, XPS and FTIR results showed that most ethylacetate groups (–COOEt) were converted into the amide groups (–N–C=O). The new functionalized ligand system exhibits high capacity for extraction and removal of the metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) with efficiency of 95–97% after recovery from its primary metal complexes. This functionalized ligand system formed 1:1 metal to ligand complexes.     

Selective extraction of Fe<Superscript>3+</Superscript> ions from Fe<Superscript>3+</Superscript>-Zn<Superscript>2+</Superscript> mixture with phosphate sorbents

The absorption of Fe³⁺ ions from Fe³⁺-Zn²⁺ mixture with zinc and calcium phosphates was studied.     

Incorporation of Mg<Superscript>2+</Superscript>, Sr<Superscript>2+</Superscript>, Ba<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript> into aragonite and comparison with calcite

We have investigated the presence of foreign ions into the bulk structure and the external surfaces of aragonite using periodic ab-initio methods. Four cations isovalent to Ca²⁺ were studied: Mg²⁺, Sr²⁺, Ba²⁺ and Zn²⁺. The calculations were performed at structures (bulk, surface) that contain four and eight CaCO₃ units. Our results, at the Hartree-Fock level, show that the incorporation of those ions into aragonite depends strongly on their size. Mg²⁺ and Zn²⁺, due to their smaller size, can substitute Ca²⁺ ions in the crystal lattice while the incorporation of Sr²⁺ and Ba²⁺ into aragonite is energetically less favoured. Examination of the [011], [110] and [001] surfaces of aragonite revealed that the surface incorporation reduces the energetic cost for the larger ions. These systems provide challenging examples for most shape analysis methods applied in Mathematical Chemistry.     

A new perylene diimide-based colorimetric and fluorescent sensor for selective detection of Cu<Superscript>2+</Superscript> cation

A new perylene diimide (PDI) ligand (1) functionalized with a dipicolylethylenediamine (DPEN) moiety was synthesized and first used as a colorimetric and fluorometric dual-channel sensor to specifically detect the presence of Cu²⁺ over a wide range of other cations. The solution of 1 (10 μmol/L) upon addition of Cu²⁺ displayed distinguishing pink color compared with other cations including K⁺, Ni²⁺, Ca²⁺, Mn²⁺, Na⁺, Sr²⁺, Zn²⁺, Co²⁺, Cd²⁺, Mg²⁺, Cr³⁺, Ag⁺, and Ba²⁺, indicating the sensitivity and selectivity of 1 to Cu²⁺. Thus, the advantage of this assay is that naked-eye detection of Cu²⁺ becomes possible. Moreover, among these metal ions investigated, only Cu²⁺ quenched more than half fluorescent intensity of 1. The ESI-TOF spectrum of a mixture of 1 and CuCl₂ in combination of the fluorescence titration spectra of 1 (10 μmol/L) upon addition of various amounts of Cu²⁺ revealed the formation of a 2:1 metal-ligand complex through the metal coordination interaction. Supported by the National Natural Science Foundation of China (Grant Nos. 20872101 & 20772086)     

A new Schiff base fluorescent indicator for the detection of Mg<Superscript>2+</Superscript> and its application to real samples

A new Schiff base fluorescence probe, 3-Allylsalicylaldehyde salicylhydrazone (L), for Mg²⁺ was designed and synthesized. The fluorescence of the sensor L was enhanced remarkably by Mg²⁺ with 2:1 binding ratio, and the binding constant was determined to be 1.02 × 10⁷ M^?1. Probe L had high sensitivity for Mg²⁺ in a solution of DMF/water (4:1, v/v, pH 7.5), and the detection limit was 4.88 × 10^?8 mol/L. Common coexistent metal ions, such as K⁺, Na⁺, Ag⁺, Ca²⁺, Zn²⁺, Ba²⁺, Bi²⁺, Cu²⁺, Ni²⁺, Hg²⁺, Fe³⁺ , and Al³⁺, showed little or no interference on the detection of Mg²⁺ in solution. The fluorescence probe L, which was successfully used for the determination of trace Mg(II) in real samples, was shown to be promising for liquid-phase extraction coupled with fluorescence spectra.     

Thermodynamics of resolvation of Mg<Superscript>2+</Superscript>, Ca<Superscript>2+</Superscript>, Cd<Superscript>2+</Superscript>, and Cu<Superscript>2+</Superscript> ions in aqueous-ethanol mixtures on the basis of volta potential difference method

The volta potential difference method at 298.15 K was used to determine the real primary medium effect for magnesium, calcium, cadmium, and copper ions, and also the real Gibbs transfer energy of these ions from water into a mixed water ethanol (EtOH) solution. The surface potential value at the nonaqueous solution/gas phase interface $ \Delta \chi _{H_2 O}^{EtOH} $ \Delta \chi _{H_2 O}^{EtOH} was obtained. With account for this value, chemical thermodynamic characteristics of the studied ions in the water-ethanol solvent were calculated and the effect of composition and nature of the mixed solvent on the values obtained was analyzed. The dependence of variation in the thermodynamic characteristics of cation resolvation was established on their crystallographic radius that corresponds to the following sequence: Ca²⁺ < Cd²⁺ < Cu²⁺ < Mg²⁺.     

Colorimetric chemosensor for Fe<Superscript>2+</Superscript> and Fe<Superscript>3+</Superscript> based on a ternary mixture of an anionic dye,a cationic polyelectrolyte,and a metal chelator in aqueous solution

A new colorimetric chemosensor based on a simple ternary mixture of an anionic dye, pyrogallol red (PR), a cationic polyelectrolyte, poly(diallyldimethylammonium chloride) (PDADMAC), and a metal chelator, N-(2-hydroxyethyl) ethylenediaminetriacetic acid (HEDTA) for the colorimetric detection of Fe²⁺ and Fe³⁺ has been developed in an aqueous solution buffered at pH 5. Upon addition of Fe²⁺ or Fe³⁺ to the mixture, the absorption spectra showed a bathochromic shift; correspondingly, the solution color changed from red to blue, whereas other metal ions basically resulted in insignificant spectral and color changes. From the competitive experiments, no obvious interferences for the colorimetric detection of Fe²⁺ and Fe³⁺ were observed in the presence other metal ions. The results indicated that the mixture could be used as a potential Fe²⁺ and Fe³⁺ colorimetric and naked eye chemosensor in aqueous media. This research demonstrates that the ternary ensemble consisted of an organic dye, an oppositely charged polyelectrolyte, and a metal chelator is a versatile and convenient tool for the facile preparation of a novel chemosensor system.     

Characterization of nano-iron oxyhydroxides and their application in UO<Subscript>2</Subscript><Superscript>2+</Superscript> removal from aqueous solutions

The nano-iron oxyhydroxides (α- and γ-FeOOH) were synthesized by using three ferrous and ferric salts (FeSO₄, FeCl₂, Fe(NO₃)₃) as iron precursors under alkaline conditions. Morphologies of nano-iron oxyhydroxides were characterized by employing X-ray powder diffraction (XRD) and specific surface area (SSA) analysis respectively. The occurrence of needle-like shape of nano-goethite and rod-like shape of nano-lepidocrocite were attributed to hydrolysis of Fe³⁺ cations and/or oxidization of Fe²⁺ at alkaline conditions in terms of XRD analysis. The N₂-BET SSA and BJH (Barrett–Joyner–Halenda) pore size analysis showed that internal SSA of nano-lepidocrocite is higher than that of nano-goethite, although they have similar N₂-BET SSAs. The distribution of average pore size of nano-iron oxyhydroxides are higher than that of predominant pore size due to formation of the heterogeneous nanoparticles under the experimental conditions. These nanoparticles possess the high sorption capacity and the strong affinity for contaminants. Application of nano-iron oxyhydroxides in environmental engineering plays an important role to remove a variety of contaminants, such as heavy-metal ions and organic pollutants.     

Complex formation of maleic acid with the Zn<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript>, Co<Superscript>2+</Superscript>, Cu<Superscript>2+</Superscript> in aqueous solution

The process of complex formation of maleic acid (H₂L) with the ions Zn²⁺, Ni²⁺, Co²⁺, Cu²⁺ was studied by potentiometric titration in a wide range of concentration ratios at 298 K and I = 0.1 mol/l (NaNO₃). The moieties ZnL, CoL, NiL, NiL ₂ ^2? , CuL, and CuL ₂ ^2? were detected and their stability constants were determined.