Development of chemoselective photoreduction of nitro compounds under solar light and blue LED irradiation

Solar light and blue light irradiation of the commercially available heterogeneous nano photocatalyst TiO₂–P25 leads to reduction of nitro compounds to give the corresponding amines. The methodology provides a green and mild approach to this useful class of organic compounds. Aromatic nitro compounds containing a wide range of functional groups tolerated the conditions to give, chemoselectively the corresponding amines in excellent yields.     

Iron-catalyzed selective reduction of nitro compounds to amines

An efficient reduction of the nitro group with a catalytic amount of Fe(acac)₃ and TMDS in THF at 60 °C affording the corresponding amine is described.     

Reductive N-alkylation of aromatic amines and nitro compounds with nitriles using polymethylhydrosiloxane

The potential utility of polymethylhydrosiloxane (PMHS) as a reducing agent for reductive N-alkylation of aromatic amines and nitro compounds using nitriles as an alkylating agent and Pd(OH)₂/C as a catalyst is described. The application of this method for the synthesis of several heterocyclic compounds is also reported.     

Rapid and efficient reduction of aliphatic nitro compounds to amines

The combination of NaBH₄ with catalytic quantities of NiCl₂ smoothly reduces aliphatic nitro compounds to amines in methanol; Ni₂B formed $\text{in situ}$ is the active catalyst.     

Rapid catalytic transfer reduction of aromatic nitro compounds to hydroxylamines

A general method has been developed for the rapid, metal-catalysed transfer reduction of nitro compounds to N-substituted hydroxylamines.     

Selective reduction of aromatic nitro compounds affording aromatic amines under CO/H2O conditions catalyzed by phosphine-added rhodium and ruthenium carbonyl complexes

High catalytic activities for the selective reduction of aromatic nitro compounds to the corresponding amines under the mild reaction conditions of room temperature and 1 atm of CO were found to be exhibited by chelatephosphine (dppe, dppm, etc.; dppe: 1,2-bis(diphenylphosphino)ethane, dppm: bis(diphenylphosphino)methane)-added rhodium and ruthenium carbonyl complexes in a 5 N NAOH aqueous solution. The reduction proceeded not only with high catalytic activities, but also with remarkably high nitro group selectivities; for example, 1-nitroanthraquinone afforded 1-aminoanthraquinone without other unsaturated groups (such as CO) being reduced. PR₃-added Rh(CO)₂(acac) complexes (PR₃: PEtPh₂, PEt₂Ph, PEt₃, etc.; acac: acetylacetonato) in diglyme in a 5 N NaOH aqueous solution were also found to show significant catalytic activities for the reduction of aromatic nitro compounds under mild CO/H₂O conditions. Both electronic and steric factors of phosphine ligands are important in making this reaction proceed at such remarkable rates.     

Oxygen as moderator in the zinc-mediated reduction of aromatic nitro to azoxy compounds

A simple and useful protocol for the reduction of nitro arenes to their corresponding azoxy derivatives by employing zinc and NH₄Cl in a mixture of [bmim][BF₄] and water is described. The selective reduction of nitro to azoxy is attributed to the hitherto unknown moderating effect of oxygen on zinc metal.     

Chemoselective reduction of aromatic nitro and azo compounds in ionic liquids using zinc and ammonium salts

Nitroarenes were chemoselectively reduced to the corresponding amines using zinc and aqueous ammonium salts in ionic liquids as a safe and recyclable reaction medium. Our results specify the effect of ammonium salts in the process; the combination of Zn/NH₄Cl in [bmim][PF₆] or Zn/HCO₂NH₄ in [bmim][BF₄] were the suitable conditions for the reduction of nitroarenes. Azobenzenes were also smoothly reduced to hydrazobenzenes with Zn/HCO₂NH₄ (aq.) in recyclable [bmim][BF₄] without any over reduction to the corresponding anilines.     

Facile solvothermal synthesis of highly active monoclinic scheelite BiVO4 for photocatalytic degradation of methylene blue under white LED light irradiation

In this study, BiVO₄ was successfully synthesized via the solvothermal process using a solvent mixture of ethylene glycol and water under different synthesis conditions of temperature and pH. Physicochemical properties such as crystal phase, morphology, and optical absorption of the as-synthesized BiVO₄ samples were characterized by X-ray diffraction (XRD), Raman spectra, field emission scanning electron microscopy (FE-SEM), and ultraviolet–visible diffraction reflection spectroscopy (UV–vis DRS). The XRD analysis showed that different synthesis conditions of temperature and pH significantly affected the growth of monoclinic BiVO₄ crystals oriented along (0 4 0) facets. Form SEM results, the synthesis conditions, including pH and temperature, have a great effect on the morphology of monoclinic structured BiVO₄. As the pH value increases in the range of 0–9 and temperature increases from 80 °C to 180 °C, the morphology of BiVO₄ changed from peanut-, rod-, and leaf-like shapes. The photocatalytic activities of as-synthesized BiVO₄ photocatalysts were evaluated by the photodegradation of methylene blue (MB) dye under irradiation of white LED light. We have found that by using appropriate synthesis conditions (the synthesis temperature of 140 °C and the synthesis pH of 7) the BiVO₄ exhibited high photocatalytic efficiency for MB degradation (about 82.30% after 180 min of irradiation). This result is due to the development of the BiVO₄ crystals oriented along (0 4 0) facets with an increase in the intensity ratio of I_(0 4 0)/I_(1 2 1). The growth of BiVO₄ crystals oriented along (0 4 0) facets may be beneficial to enhance the photocatalytic activity of monoclinic scheelite BiVO₄.     

Reductive monoalkylation of aromatic and aliphatic nitro compounds and the corresponding amines with nitriles

[reaction: see text] A simple, selective, rapid, and efficient procedure for the synthesis of secondary amines from the reductive alkylation of either aliphatic or aromatic nitro compounds and the corresponding amines is reported. Ammonium formate is used as the hydrogen source and Pd/C as the hydrogen transfer catalyst. The reaction is carried out at room temperature. The rate differences for the preferential formation of secondary over tertiary products are due to both steric and electronic factors.     

Photocatalytic cleavage of hydroxytriazenes: a solid-state synthesis of azo-dyes under sunlight irradiation

Sunlight-induced decomposition of hydroxytriazenes, and green photochemical synthesis of azo-dyes is described. Three substituted hydroxytriazenes, viz: 3-hydroxy-3-(2-methylphenyl)-1-(3-chloro-4-fluorophenyl)triazene (o-CFHT), 3-hydroxy-3-(3-methylphenyl)-1-(3-chloro-4-fluorophenyl)triazene (m-CFHT), and 3-hydroxy-3-(4-methylphenyl)-1-(3-chloro-4-fluorophenyl)triazene (p-CFHT) were co-crystallized with ??-naphthol in equimolar ratio and exposed to sunlight for 9?C10?h. The reaction resulted in formation of azo-dyes which were identified by comparison with the products obtained by the conventional method (standard azo-dye), by use of HPLC. A probable mechanism has been suggested. This is first eco-friendly synthesis of azo-dyes using hydroxytriazenes.     

Reduction of aromatic nitro compounds to amines using zinc and aqueous chelating ethers: Mild and efficient method for zinc activation

A mild, environmentally friendly method for reduction of aromatic nitro group to amine is reported, using zinc powder in aqueous solutions of chelating ethers. The donor ether acts as a ligand and also serves as a co-solvent. Water is the proton source. This procedure is also a new method for the activation of zinc for electron transfer reduction of aromatic nitro compounds. The reduction is accomplished in a neutral medium and other reducing groups remained unaffected. The ethers used are dioxolane, 1,4-dioxane, ethoxymethoxyethane, dimethoxymethane, 1,2-dimethoxyethane, and diglyme.     

Graphite catalyzed reduction of aromatic and aliphatic nitro compounds with hydrazine hydrate

Aromatic and aliphatic nitro compounds were readily reduced to amino compounds in excellant yields with graphite and hydrazine hydrate.     

Morphological and heterojunctional engineering of two-dimensional porous Mo-Ni based catalysts for highly effective catalytic reduction of aromatic nitro compounds

Hydrogenation reactions play crucial roles on chemical synthesis and pollutant elimination. The improvement of the ability to activate reactants and increase of the contact probability between the catalysts and reactants are positive to improve the catalytic performance. Herein, we have reported the design of two-dimensional porous Ni-Ni₃N-Ni Mo N heterojunction sheets(2D Mo-Ni based nanosheets) for efficient catalytic hydrogenation of the aromatic nitro-compounds. The heterojunction ...     

Determination of nanogram amounts of primary aromatic amines and nitro compounds in blood and plasma.

A rapid and highly sensitive method, based on the direct fluorimetric scanning of thin-layer chromatograms, is described for the quantitative determination of flunitrazepam and its main metabolites in human blood or plasma. This method is generally applicable to aromatic nitro compounds that are reducible with tin(II) chloride. In particular, it is possible to determine primary amines in nanogram amounts. Fluorescamine is used as a regent to produce fluorescent derivatives. The method is suitable for pharmacokinetic studies of flunitrazepam and its main metabolites in human blood and plasma.     

Oxidative dimerization of aromatic amines using tBuOI: entry to unsymmetric aromatic azo compounds

It's all the hype: An oxidative dimerization reaction of aromatic amines utilizing tert-butyl hypoiodite (tBuOI) under mild reaction conditions leads to aromatic azo compounds. The method allows access to unsymmetric aromatic azo compounds, which are difficult to prepare by conventional synthetic methods, in a selective manner.     

A novel method for the preparation of a highly stable and active CdS photocatalyst with a special surface nanostructure

A novel method for the preparation of a CdS photocatalyst is presented. In this method, freshly prepared CdO obtained by decomposing cadmium acetate at a certain temperature was subjected to thermal treatment in the presence of H2S, which results in the formation of a highly stable and active CdS photocatalyst. In comparison to conventional preparation methods, CdS prepared by our method was found to be stable against both air oxidation and photocorrosion during a photocatalytic reaction. Most importantly, the special nanostep structure was observed at the surface of the sulfide photocatalyst, which was demonstrated to be crucial for the remarkable enhancement of photocatalytic hydrogen production. The apparent quantum yield at 420 nm and the energy conversion efficiency in the whole visible light region were determined to be 24.1% and 6.35%, respectively, in our experimental conditions.     

Alternative method for the reduction of aromatic nitro to amine using TMDS-iron catalyst system

The system 1,1,3,3-tetramethyldisiloxane (TMDS)/Fe(acac)₃ is reported here as a new method to obtain amines from aromatic nitro compounds. Amines are synthetized in a straightforward step and are isolated as hydrochloride salts with good to excellent yields. This system has shown a good selectivity toward aryl-chloride, aryl-bromide, ester, carboxylic acid, and cyano groups.The reduction of alkylnitro compounds was unfortunately not possible using this method, only a mixture of mono and dialkylated amine was obtained.