首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
By the reaction of poly(bromoacetyl styrene) (EBPS) with thiaurea (TU), a kind of novel chelating resin with heterocyaclic ring of sulfur and nitrogen, poly[4-(2-amino)thiazoleyl-4-vinylben=ene], was synthesized. Its structure was characterized by FTIR and elemental analysis. The factors which have influence on the reaction such as reaction time, solvents, and molar ratio of reactants were investigated.  相似文献   

2.
A new class of poly(ester-imide-ether) multiblock copolymers was synthesized by transes-terification and meltcopolymerization of dimethyl terephthalate (DMT) and N-(4-carbomethoxyphenyl)-4-(carbomethoxy)-phthalimide withethylene glycol (EG) and polytetramethylene glycol (PTMG). The structure of the above copolymers was characterized by~1H-NMR and IR spectroscopy. Some properties of the coplymers were also examined. It was found that their mechanicalproperties and heat stability, compared with poly(ether-ester) copolymers, were obviously improved.  相似文献   

3.
The aim of this paper was to test the thermal and environmental stability of poly(4-ethynyl-p-xylyleneco-p-xylylene) thin films prepared by chemical vapor deposition(CVD) and to optimize the reaction conditions of the polymer.Fourier transformed infrared spectroscopy(FTIR),thermogravimetric analysis(TGA) and fluorescence microscopy were employed to investigate the stability of the reactive polymer coatings in various environmental conditions.Chemical reactivity of the thin films were then tested by Huisgen 1,3-dipolar cycloaddition reaction(‘‘click' reaction).The alkyne functional groups on poly(4-ethynyl-p-xylylene-co-p-xylylene) thin films were found to be stable under ambient storage conditions and thermally stable up to 100 8C when annealed at 0.08 Torr in argon.We also optimized the click reaction conditions of azide-functionalized molecules with poly(4-ethynyl-p-xylylene-co-p-xylylene).The best reaction result was achieved,when copper concentration was 0.5 mmol/L,sodium ascorbate concentration to copper concentration was 5:1.In contrast,the azide concentration and temperature had no obvious effect on the surface reaction.  相似文献   

4.
Chemical reactions between poly (vinyl pyridine)s and 1, 4-butanediol diglycidyl ether and other epoxy compounds were studied by Fourier transform infrared spectroscopy and other techniques. The epoxy group was found to react with the pyridine side group of poly (4-vinyl pyridine), forming crosslinked networks which contain cyclic amide structures. The reaction was also observed in the interracial region of poly(vinyl pyridine) and γ-glycidoxy propyl trimethoxysilane hydrolyzate (γ-GPS) coatings on PET fiber substrates. Poly(2-vinyi pyridine) does not show the same reaction.  相似文献   

5.
Side chain liquid crystalline polysiloxanes containing benzyl ether linkingunits were synthesized by the hydrosilylation of poly (methylhydrosiloxane) with a series of4-(4-alkoxybenzyloxy)-4'-allyloxybiphenyl monomers [4-(4-methoxybenzyloxy )-4'-allyloxy-biphenyl(M_1), 4-(4-ethoxybenzyloxy)-4'-allyloxybiphenyl (M_2), 4-(4-propoxybenzyloxy)-4'-allyloxybiphenyl (M_3), 4-(4-butoxybenzyloxy)-4'-allylox(M_4), 4-(4-pentoxy-benzyloxy)-4'-allyloxybiphenyl (M_5), 4-benzyloxy-4'-allyloxybiphenyl (M_6)]. The phasebehavior of monomeric and polymeric liquid crystals was characterized by differential scan-ning calorimetry and optical polarization microscopy where the groups are ranged frommethoxy to pentoxy Both the monomeric and polymeric liquid crystals exhibit 1iquidcrystal behaviors.  相似文献   

6.
通过4-溴苯甲醇和三甲基硅基乙炔的Sonagashira偶联反应与三甲基硅基的脱除反应,合成4-乙炔基苯甲醇.以4-乙炔基苯甲醇为引发剂,以有机氮杂环化合物DBU为催化剂,常温常压下进行丙交酯的活性开环聚合反应,采用1H-NMR和GPC对产物结构、分子量与分子量分布进行表征分析,结果表明,合成以了苯乙炔为端基的聚乳酸大...  相似文献   

7.
Sulfur-containing monomers have received special interest from researchers because of their outstanding opticalperformance. Using the reaction between 2-phenylthioethyl-1-mercaptan and p-chloromethylstyrene, a new vinyl monomer4-(2-phenylthioethylthiomethyl)styrene (PTETMSt) was synthesized. Its structure was characterized by FT-IR and NMR.Copolymerization of styrene and PTETMSt was investigated. The data show that poly(styrene-co-PTETMSt) has higher refractive index, lower density and percentage of water absorption. The copolymer can be used on optical materials.  相似文献   

8.
A phosphrous-containing poly(aryl ether ketone)was synthesized derived from bisphenol-A and bis[4-(4- fluorobenzoyl)phenyl] phenyl phosphine oxide(FPPPO)by nucleophilic substitution reaction.The structure of the polymer was characterized by FT-IR,~1H-NMR and ~(31)p-NMR.The thermal property of the PAEK was measured by DSC and TGA. The glass transition temperature(T_g)of the polymer was 205℃,and the 5% weight loss temperature under nitrogen was 475℃.Good solubility of the polymer in organic solvents,such as N-methylpyrrolidone,dimethylformamide, dimethylacetamide,dimethylsulfoxide and chloroalkanes was observed,flexible film was obtained from the polymer's CH_2Cl_2 solution.The limiting oxygen index(LOI)of the PAEK was 40,which indicated that organic phosphorus moiety can offer good flame retardant property to the polymer.  相似文献   

9.
Halotosyloxylation reaction of alkynes with iodine or NBS or NCS was efficiently promoted by the poly { [4-(hydroxyl)(tosoyloxyl)iodo]styrene }.  相似文献   

10.
The oxidative polycondensation reaction conditions of 4-[(4-hydroxybenzylidene)amino]phenol(4-HBAP)were studied with H_2O_2,air oxygen and NaOCl in an aqueous alkaline medium between 50 and 90℃.The structures of the obtained monomer and polymer were confirmed by FT-IR,UV-Vis,~1H-and ~(13)C-NMR and elemental analysis.The characterization was made by TG-DTA,size exclusion chromatography(SEC)and solubility tests.At the optimum reaction conditions,the yield of poly[4-(4-hydroxybenzylidene amino)phenol](P-4-HBAP)was found to be 48.3%(for H_2O_2 oxidant),80.5%(for air O_2 oxidant)and 86.4%(for NaOCl oxidant).According to the SEC analysis,the number-average molecular weight(M_n),weight-average molecular weight(M_w)and polydispersity index(PDI)values of P-4-HBAP was found to be 8950,10970 g mol~(-1) and 1.225,respectively,using H_2O_2;and 11610,15190 g mol~(-1) and 1.308 respectively, using air O_2 and 7900,9610 g mol~(-1) and 1.216,respectively,using NaOCl.According to TG-DTA analyses,P-4-HBAP was more stable than 4-HBAP against thermal decomposition.The weight loss of P-4-HBAP was found to be 49.27% at 1000℃. The highest occupied molecular orbital(HOMO)and the lowest unoccupied molecular orbital(LUMO)values calculated from electrochemical measurement.Electrochemical energy gaps(E′_g)of 4-HBAP and P-4-HBAP were found to be-5.46, -5.28;-2.26,-2.67;3.20 and 2.61 eV,respectively.According to UV-Vis measurements,optical band gap(E_g)of 4-HBAP and P-4-HBAP were found to be 3.34 and 3.01 eV,respectively.Also,antimicrobial activities of 4-HBAP and P-4-HBAP were examined against selected some bacteria.The electrical conductivity of the polymer was measured after doping with iodine.  相似文献   

11.
聚亚胺酮的合成与性能研究   总被引:6,自引:0,他引:6  
聚酰胺(PA)、聚醚酮(PEK)和聚酰亚胺(PI)等作为高性能材料已被开发并得到应用.这些高性能材料可用于航空、航天、微电子等高新技术领域[1~5].与此同时,为了满足人们对新材料的需求,科学界对新型高性能材料的开发和应用始终没有停止,且备受关注.本文首先通过傅-克酰基化反应合成  相似文献   

12.
A novel polymer supported [poly (styrene-co-maleic imide) (SMI)]Cu(I) nano-particles was prepared via in situ reaction of 4-amino-5-methyl-4H-1,2,4-triazole-3-thione with [poly (styrene-co-maleic anhydride)] (SMA) along with immobilization of CuI. These nano-particles were fully characterized by using scanning electron microscopy (SEM), energy dispersive spectroscopy analysis, Xray (EDAX), inductively coupled plasma (ICP) analysis, 1H NMR and FT-IR techniques. Moreover, the structural and electronic features of metal–ligand interactions in the complex model of polymer-supported copper nanocatalyst were assessed using density functional theory calculations. The catalytic activity of these supported Cu(I) nonoparticles was examined in one of the classiest name reaction so–called “click reaction” which is coined K. B Sharpless for the regioselective synthesis of 1,2,3-triazole derivatives using a multicomponent reaction (MCR) involving benzyl halides, sodium azide and terminal alkynes in water as a green solvent. This heterogeneous catalyst showed excellent catalytic activity and was separated by simple filtration and was used at least in five consecutive runs without a significant decrease in its activity.  相似文献   

13.
The living cationic polymerization of 4-[2-(tert-butyldimethylsiloxy)ethyl]styrene(TBDMES)was studied in methylcyclohexane(MeChx)/methylchloride(MeC1)(50/50 V/V)solvent mixture at-80℃.The initiator 1,1- diphenylethylene(DPE)capped 2-chloro-2,4,4-trimethylpentane(TMPCl)was formed in situ in conjunction with titanium tetrachloride(TiCl_4).The Lewis acidity of TiCl_4 was decreased by the addition of titanium(IV)isopropoxide(Ti(OiPr)_4)to accomplish living polymerization of TBDMES.Hydrolysis of poly(TBDMES)i...  相似文献   

14.
A novel soluble poly(aryl ether ketone) was prepared by the reaction of 4-(3-phenyl-4-hydr-oxyphenyl)phthalazinone with 4,4'-difluorobenzophenone. The polymer was characterized by DSC, TGA andX-ray diffraction.  相似文献   

15.
Several new 2-arylidinoamino-4-(3-coumaryl)thiazole derivatives were synthesized via the reaction of 2-amino-4-(coumaryl)thiazole with aromatic aldehydes and other reagents. Structural elucidations were based on elementary analysis and spectral data studies.  相似文献   

16.
A novel tetrafunctional initiator, C [CH_2O (CH_2)_3 OOCCH(Br)CH_3]_4 (1), was synthesized through the reaction oftetraol with α-bromopropionyl chloride, and then was used as initiator of atom transfer radical polymerization (ATRP) in thepreparation of 4-armed polystyrene (PSt) with narrow polydispersity. The structure, molecular weight and molecular weightdistribution (MWD) of each arm were studied by ~1H-NMR and GPC data of hydrolyzed products of the 4-armed PSt. TheATRP of St using 1/CuBr/bpy as initiator system is of "living" character based on the following evidence: narrow MWD,constant concentration of chain radical during the polymerization, control of molecular weight by the molar ratio of monomerconsumed to 1. The 4-armed poly(St-b-p-nitrophenyl methacrylate) [poly(St-b-NPMA)] was prepared by the ATRP ofNPMA using 4-armed PSt with terminal bromine as the initiator, and characterized by FT-IR, ~1H-NMR spectra and GPCcurves. The micelles with PSt as core, and PNPMA as shell were formed by dropping DMSO into a solution of 4-armedpoly(St-b-NPMA) in DMF, as proved by laser light scatter (LLS) method.  相似文献   

17.
新型含环己烯结构的氮杂环聚醚聚合物的合成   总被引:1,自引:0,他引:1  
用新型聚合单体 1 甲基 4,5 二 (4 氯代苯甲酰基 )环己烯与 4 (4 羟基苯基 ) 2 ,3 二氮杂萘 1 酮、4,4′ 二氯二苯砜单体经亲核共缩聚反应 ,成功地合成了含环己烯结构的杂环联苯型聚醚系列聚合物 .用FT IR、1 H NMR、DSC、X 射线衍射等方法对聚合物进行了表征 ,并研究了聚合物的溶解性能 .结果表明 ,这系列聚合物是具有较高的玻璃化温度的可溶性无规共聚物 .聚合物含有不饱和双键结构 ,可作为交联聚合物、接枝聚合物及其它特种高分子材料的中间体 .而且通过二元或三元聚合 ,来改变交联点和接枝点的密度 ,为进一步得到结构更加多样化与性能各异的聚芳醚的交联聚合物、接枝聚合物及其它特种高分子材料 ,提供一个良好的基础  相似文献   

18.
 A novel alcohol-soluble polyorganosiloxane containing amino side groups, poly[3-(4-aminophenoxy)propylmethylsiloxane] (2), was first prepared by the reduction of nitro groups on 4-nitrophenoxypropyl side chains of poly[3-(4-nitrophenoxy)propylmethylsiloxane] (1). The reaction proceeded easily with nearly 100% conversion. The synthesized alcohol-soluble polymer 2, which has potential application as a precursor for preparing advanced functional polymers, was characterized by FTIR 1H-NMR, 13C-NMR, 29Si-NMR, VPO and GPC, respectively.  相似文献   

19.
含偶氮苯基侧基聚硅氧烷的合成及光致变色性   总被引:11,自引:1,他引:11  
含偶氮苯基侧基聚硅氧烷的合成及光致变色性张其震,张静智,王艳(山东大学化学系济南250100)(山东大学环境科学中心济南250100)关键词聚硅氧烷,光致变色,光异构化,量子产率将光致变色性和液晶性化合物结合可得到新的多功能高分子材料,Ringedo...  相似文献   

20.
Poly[4-(4-nitrobenzyloxy)styrene] was synthesized with a high degree of etherification by the reaction of poly(4-hydroxystyrene) (PHST) with p-bromomethylnitrobenzene (p-BMNB) using 1,8-diazabicyclo-[5,4,0]-7-undecene (DBU) in hexamethylphosphoramide (HMPA). Poly[4-(3-nitrobenzyloxy)styrene] and poly[4-(2-nitrobenzyloxy)styrene] were also prepared with a high degree of etherification by the corresponding reaction with m- or o-BMNBs. However, the degrees of etherification of PHST with these BMNBs were relatively low when the reactions were carried out in other aprotic polar solvents such as DMF, DMSO, and N-methyl-2-pyrrolidone. On the other hand, poly(4-introbenzyl methacrylate) (PPNBMA), poly(3-nitrobenzyl methacrylate) (PMNBMA), and poly(2-nitrobenzyl methacrylate) (PONBMA) were synthesized with a high degree of esterification by the reaction of poly(methacrylic acid) with the corresponding BMNBs using DBU in DMSO at 30°C. The photochemical properties of the resulting poly(nitrobenzyl methacrylate)s were examined, and it was found that the rates of photodecomposition of PPNBMA and PMNBMA were promoted by the addition of tributylamine and trifluoromethanesulfonic acid, respectively. However, the rate of photodecomposition of PONBMA was not affected by addition of the base or the acid.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号