Multicomponent domino [4+2]/[3+2] cycloadditions of nitroheteroaromatics: an efficient synthesis of fused nitrogenated polycycles

Activation by high pressure allows 3-nitroindole and 3-nitropyrrole derivatives to behave as electron-poor heterodienes in multicomponent domino [4+2]/[3+2] cycloaddition processes. The primary [4+2] inverse demand cycloaddition appears to be completely endo selective, while the subsequent [3+2] process shows a total facial selectivity, setting the stereochemistry at ring junction, and an endo/exo selectivity depending on the nature of the heterocycle. In two operations, a polycyclic diamine featuring a quaternary center at ring junction is efficiently generated.     

Thiacalix[4]arene derivatives as radium ionophores: a study on the requirements for Ra2+ extraction

The synthesis and NOE-based structural characterization is described of thiacalix[4]arene tricarboxylic acid (7), thiacalix[4]crown-5 and -6 monocarboxylic acids (2 and 5), and the bis(N-methylsulfonyl)thiacalix[4]crowns-5 and -6 (4a,b). The 226Ra2+ selectivity coefficients, log(K(Ra)ex/K(M)ex), of the new thiacalix[4]arene derivatives are compared directly with those of thiacalix[4]crown-5 and -6 (1a,b), thiacalix[4]crown-5 and -6 dicarboxylic acids (3a,b), and thiacalix[4]arene di- and tetracarboxylic acids (6 and 8). Thiacalix[4]arene dicarboxylic acid (6) already exhibits a high 226Ra2+ selectivity, but this is significantly improved in the case of 3b, having an additional crown-(6-)ether bridge. The covalent combination of a crown ether and carboxylic acid substituents as in the thiacalix[4]arenes 2,3a,b,4a,b, and 5 gives a better 226Ra2+ selectivity in the presence of Sr2+ or Ba2+ than mixtures of dibenzo-21-crown-7 and thiacalix[4]arene dicarboxylic acid (6) or of pentadecanoic acid and thiacalix[4]crown-6 (1b).     

Diastereoselective [4 + 4]-photocycloaddition reactions of pyran-2-ones: rapid access to functionalized 5-8-5 skeletons

Fused bicyclic pyran-2-ones with pendant furan side chains and an oxygenated stereogenic center adjacent to the pyranone ring oxygen were prepared via FeCl(3)-catalyzed Michael addition. Irradiation furnished the corresponding lactone-bridged tricyclic [4 + 4]-cycloadducts with good facial selectivity. Surprisingly, the major isomer resulted from approach of the furan from the same face as the protected alcohol. [reaction: see text]     

A theoretical study of the [4 + 4] dimerization of thioformylketene

[reaction and structure: see text] A theoretical study (B3LYP and G3MP2B3) of the dimerization of thioformylketene (1) was performed. Four pathways-two [4 + 2] pathways with thioformylketene (1), one [4 + 4] pathway with 1, and one [4 + 2] pathway involving 1 and thietone (11)-were considered. Interestingly, the [4 + 4] pathway with 1 had the lowest barrier (3.8 kcal/mol). The geometry of the transition state TS14 is unusual, with the forming bonds in the plane of the ketene. This suggests that the reaction is pseudopericyclic.     

Solvent-dependent stereoselectivity of bis-2-pyridone [4 + 4] photocycloaddition is due to H-bonded dimers

[formula: see text] A solvent-dependent stereoselectivity found for intramolecular [4 + 4] photocycloaddition of tethered 2-pyridones is concentration dependent, indicating that a dimeric structure with four hydrogen bonds plays a critical role in the observed cis selectivity found for nonpolar solvents.     

Ca2+- and Ba2+-selective receptors based on site-selective transmetalation of multinuclear polyoxime-zinc(II) complexes

Ca2+-selective recognition was achieved by using the site-selective transmetalation of homotrinuclear metallohost [L1Zn3]2+ containing a linear tetraoxime ligand. The selectivity (log(KCa/KMg) > 5.1) is comparable to those of the excellent Ca2+ receptors or sensors such as BAPTA, Quin2, and K23E1. X-ray crystallography revealed that the Ca2+ complex [L1Zn2Ca]2+ has a helical structure. On the other hand, the larger analogue H6L2 gave a mixture of [L2Zn4]2+ isomers, which selectively recognizes Ba2+ to give a single tetranuclear complex, [L2Zn3Ba]2+.     

Dimeric Calix[4]resorcinarene-based Porous Organic Cages for CO2/CH4 Separation

Investigating gas separation by emerging porous organic cage(POC) solids is still on its initial stage. In this work, two novel [2+4] organic cages with distinguished structures have been prepared based on the Schiff-based condensation reaction between tetraformyl-functionalized calix[4]resorcinarene building blocks and xylylenediamine(XDA) isomers. Specifically, the use of para-position XDA affords lantern-shaped cage(CPOC-105) with a medium cavity of ca. 0.526 nm³, while the meta-position produces peanut-shaped structure(CPOC-106) with two small cavities of ca. 0.181 nm³. Both CPOC-105 and CPOC-106 exhibit high selectivity capture of CO₂ over CH₄ with calculated selectivity coefficients of 4.5 and 3.1, respectively, under ambient conditions, and are capable of separating CO₂/CH₄ mixtures by fixed-bed column breakthrough experiments.     

Efficient and Selective Extraction of Fe3+ by Mono- and Di-Azocalix[4]arene Derivatives

Nine series of chromogenic mono- (A1-A2) and di- (B1-B7) substituted azocalix[4] arene analogues containing more than one azo group were described. Different chelating agents like ester and ketone moieties were grafted on the lower rim position of azocalix[4]arenes. The selective extraction properties of Fe³⁺ cation were studied by liquid-liquid extraction. This extraction process was carried out by using compounds A1-A2 and B1-B7. The results proved that coupling of phenylazo groups onto the upper rim of azocalix[4]arenes yielded greater efficiency and selectivity for carrying the Fe³⁺ cation in the extraction process at pH 2.2.     

2 + 4] and [4 + 2] cycloadditions of o-thioquinones with 1,3-dienes: a computational study

Cycloadditions of o-thioquinones (o-TQs) with 1,3-dienes could proceed via either a [2 + 4] or a [4 + 2] mechanism. Under kinetic control and with acyclic dienes the reaction affords the spiro cycloadducts 5deriving from the [2 + 4] path as the main products. Under thermodynamic control, or with cyclic dienes, the o-TQs behave as heterodienes to give the benzoxathiin derivatives 4, in most cases with complete regioselectivity. In the present computational study, DFT calculations were performed in order to achieve a deep understanding of both [2 + 4] and [4 + 2] paths. The reactions of three o-TQs with six 1,3-dienes were thoroughly investigated at the B3LYP/TZVP//B3LYP6-31G level, and the two reaction mechanisms were then compared, evidencing that [2 + 4] cycloadditions are kinetically favored, strongly asynchronous, or even unconcerted, while [4 + 2] reactions are thermodynamically favored, quite asynchronous, but undoubtedly concerted. Moreover, the observed regioselectivity was rationalized by mean of the FMO theory and by comparison of the activation energies for different pathways.     

Aqueous solution chemistry of [Mo3CuSe4]n+ (n = 4, 5) and [W3CuQ4]5+ (Q = S, Se) clusters

The triangular cluster [Mo3Se4(H2O)9]4+ reacts with Cu turnings to give a new heterometallic cuboidal cluster [Mo3CuSe4(H2O)10]4+(purple; UV/Vis lambda(epsilon): 352(3907), 509(2613)). The reaction of [Mo3Se4(H2O)9]4+ with CuCl afforded the 5+ cube [Mo3CuSe4(H2O)10]5+(red; UV/Vis lambda(epsilon): 356(5406), 500(3477)). In contrast, [W3Se4(H2O)9]4+ both with Cu and CuCl gives the 5+ cube, [W3CuSe4(H2O)10]5+(yellow-green; UV/Vis lambda(epsilon): 312(5327), 419(3256) and 628(680)). Cyclic voltammetry of [M3CuQ4(H2O)10]5+ in 2 M HCl (M = Mo, W; Q = S, Se) shows a reversible one-electron reduction wave for the Mo clusters, but no reduction occurs for the W clusters prior to H+ reduction. In HCl solutions, Cl is coordinated to the Cu site of the clusters, alongside some less extensive coordination to Mo and W, and for [W3(CuCl)S4(H2O)6Cl3]+, isolated as the supramolecular adduct with cucurbit[6]uril, [W3(CuCl)S4(H2O)6Cl3]2Cl2 x C36H36N24O12 x 12H2O, the crystal structure was determined (Cu-W 2.856(4) angstroms, W-W 2.7432(15) angstroms, Cu-Cl 2.167(13) angstroms).     

Lewis acid induced [4+3] cycloadditions of 2-silyloxyacroleins. Insights on the mechanism from a DFT analysis

The mechanism for the Lewis acid induced [4+3] cycloadditions of 2-(trimethylsilyloxy)acrolein with furan has been examined here through DFT calculations at B3LYP/6-31G* level. The mechanism is a three-step process initialized by the nucleophilic attack of furan to the β-conjugated position of acrolein yielding a zwitterionic intermediate. The key step on the formation of the seven-membered ring is the electrophilic attack of the furan residue to the carbonyl carbon in this intermediate. The endo selectivity experimentally observed is reproduced by the calculations.     

An efficient, overall [4+1] cycloaddition of 1,3-dienes and nitrene precursors

Intermolecular cycloadditions of conjugated dienes and nitrene precursors usually produce aziridines. A generally useful method was lacking to directly provide the [4+1] cycloadducts, 3-pyrrolines. We have realized this transformation by using an uniquely active catalyst, copper(II) 1,1,1,5,5,5-hexafluoroacetylacetonate ([Cu(hfacac)(2)]). The method is applicable to a wide array of dienes with good yields. When 1,4-disubstituted dienes are used as substrates, good-to-excellent cis or trans selectivity can be obtained. Interestingly, the cis or trans preference depends on the nature of the substituents, rather than diene geometry. Mechanistic studies reveal that the [4+1] cycloaddition proceeds through diene aziridination and subsequent ring expansion. Among common copper catalysts, only [Cu(hfacac)(2)] can efficiently catalyze both steps, which explains the unique efficiency of the catalyst.     

The [2 + 1] and [4 + 3] cyclization reactions of fulvenes with Fischer carbene complexes: new access to annulated cyclopentanones

Pentafulvenes are regioselectively cyclopropanated with group 6 Fischer carbene complexes leading to the homofulvene ring with complete endo selectivity. The homofulvene adducts undergo in turn a further cyclopropanation with ethyl diazoacetate or cyclopentannulation with a Fischer alkenyl carbene complex to provide substituted cyclopentanones after ozonolysis of the exocyclic carbon=carbon double bond. Fischer alkynyl carbene complexes also produce the corresponding alkynyl homofulvenes, albeit the exo stereoisomer is in this case exclusively or preferentially formed. Under moderate CO pressure, tungsten alkynyl carbene complexes cycloadd to pentafulvenes in a [4 + 3] fashion, giving rise to bicyclo[3.2.1]octadien-2-ones.     

Theoretical study of the [2+2+2+1] cycloaddition mechanism of enediynes and carbon monoxide catalyzed by rhodium

The [2+2+2+1] cycloaddition mechanism of enediynes and carbon monoxide catalyzed by the [Rh(CO)2Cl]2 rhodium dimer has been studied using density functional theory, comparing this multistep process with the two-step reaction in the absence of a catalyst. According to our results, the multistep mechanism agrees with that previously suggested. The great selectivity of this reaction and the influence of the chosen solvent in this selectivity were also analyzed.     

Substituent Effects on Fe+-Mediated [4+2] Cycloadditions in the Gas Phase

The Fe⁺-mediated [4+2] cycloaddition of dienes with alkynes has been examined by four-sector ion-beam and ion cyclotron resonance mass spectrometry. Prospects and limitations of this reaction were evaluated by investigating several Me-substituted ligands. Me Substitution at C(2) and C(3) of the diene, i.e., 2-methylbuta-1,3-diene, 2,3-dimethylbuta-1,3-diene, hardly disturbs the cycloaddition. Similarly, variation of the alkyne by use of propyne and but-2-yne does not affect the [4+2] cycloaddition step, but allows for H/D exchange processes prior to cyclization. In contrast, Me substituents in the terminal positions of the diene moiety (e.g., penta-1,3-diene, liexa-2,4-diene) induce side reactions, namely double-bond migration followed by [3+2] and [5+2] cycloadditions, up to almost complete suppression of the [4+2] cycloaddition for 2,4-dimethylhexa-2,4-diene. Similarly, alkynes with larger alkyl substituents (pent-1-yne, 3,3-dimethylbut-1-yne) suppress the [4 + 2] cycloaddition route. Stereochemical effects have been observed for the (E)- and (Z)-penta-1,3-diene ligands as well as for (E,E)- and (E,Z)-hexa-2,4-diene. A mechanistic explanation for the different behavior of the stereoisomers in the cyclization reaction is developed. Further, the regiochemical aspects operative in the systems ethoxyacetylene/pentadiene/Fe⁺ and ethoxyacetylcne/isoprene/Fe⁺ indicate that substituents avoid proximity.     

Photoinduced [4 + 4] cycloadditions of o-quinones with oxazoles

[reaction: see text] Photocycloadditions of 9,10-phenanthraquinone (PQ) with oxazoles (1a and 1b) gave [4 + 4] products 2 with the O=C-C=O functionality in PQ and the 2-azadiene moiety in oxazole as 4pi addends. Photoreactions of 1-acetylisatin (IS) with 1a, 1c, and 1d gave [4 + 4] product A, which underwent further [2 + 2] reactions with another (3)IS to furnish 5. These regioselective and diastereoselective [4 + 4] photocycloadditions are rationalized by the intervening of the key conformers for ISC and bond formation of the most stable 1,6-diradical intermediates.     

基于杯[4]芳烃的银离子荧光探针的合成及性能

合成了25,27-二羟基-26,28-二{3-[N-(2-萘基)-2-硫代乙酰胺]丙氧基}-5,11,17,23-四叔丁基杯[4]芳烃(2), 并利用荧光光谱考察了其在乙醇-水混合溶液中对Ag⁺的光谱选择性. 结果表明, 含有S₂O₂结合位点的探针分子2对Ag⁺具有良好的选择性. 通过荧光光谱连续滴定测得探针分子2-Ag⁺体系的猝灭常数为3.39×10³ L/mol, 探针分子对Ag⁺的检出限可达2.34×10^-7 mol/L. 在实际的Ag⁺检测中, 探针分子2具有一定的应用前景.     

Influences of Hard Donor on Cation Selectivities Closing to Soft Selenium Donor in Tweezer-like Calix[4]arene Receptors

Three novel 25,27-dihydroxy-26,28-bis(3-benzylselenopropoxy)-5,11,17,23-tetra-tert-butylcalix[4]-arene (2),25,27-dihydroxy-26,28-bis[3-(2-hydroxyethylseleno)propoxy]-5,11,17,23-tetra-tert-butyl-calix[4]arene (3) and 25,27-dihydroxy-26,28-bis(3-propylselenoproppxy)-5,11,17,23-tetra-tert-butyl-calix[4]arene (4) were synthesized for the comparison of their ion-selectivity in ion-selective electrodes (ISE). X-ray structure of the CH/π complex of 4.CH2Cl2 was elucidated. ISEs based on 2-4 as neutral ionophores were prepared, and their selectivity coefficients for Ag (logKAg,M^pot) were investigated against some main group metal ions and transition metal ones using the fixed interference method (FIM). These ISEs showed excellent Ag^ selectivity over most of the interfering cations examined. It is evident that the stronger Hg^2 interference may not be produced while hard donors (hydroxy) are close to the soft selenium donors.     

Thiacalix[4]arene based fluorescent probe for sensing and imaging of Fe3+ ions

A thiacalix[4]arene based fluorescent chemosensor 3 in the cone conformation has been synthesized and its recognition behaviour is evaluated toward various metal ions in mixed aqueous media. The chemosensor 3 showed high selectivity towards Fe(3+) ions by fluorescence quenching of excimer emission. Further, evaluation of the 3·Fe(3+) complex prepared in situ demonstrated great promise for the detection of the Fe(3+) ion in the presence of amino acids, blood serum and bovine serum albumin (BSA) solution. The compound 3 has suitable permeability into the PC3 cells and can be utilized as a Fe(3+) selective sensor in living cells (PC3 cells).     

4 + 2] cycloadditions of nitroalkenes in water. Highly asymmetric synthesis of functionalized nitronates.

The [4 + 2] cycloadditions of (E)-2-aryl-1-cyano-1-nitroalkenes 1 with achiral and enantiopure vinyl ethers 2 and 3 carried out in sole water are reported. These reactions occur in a heterogeneous phase under mild conditions and are fast and highly stereoselective. By using (-)-N,N-dicyclohexyl-(1S)-isoborneol-10-sulfonamide as a chiral auxiliary, the cycloadditions are totally asymmetric. The face selectivity is discussed in terms of the shape of the chiral auxiliary and the reactive conformation of vinyl ether.