Effect of pH on the control of molecular orientation in monolayer of bent-core liquid crystal materials by Langmuir–Blodgett method

Control of molecular orientation at the substrate surface is significant to understand the surface science. Langmuir films of bent-core liquid crystals having alkyl chains at both ends were deposited on silicon substrate. Studies were carried out on air–water interface by changing pH of the subphase. On compression, molecules were arranged in stacks at high pH where as uniform monolayer was formed at lower pH. Limiting area increased at low pH, which resulted in the formation of monolayer after attaining a sustainable surface pressure. Langmuir films were transferred to silicon substrate, and atomic force microscopy images showed appropriate height profiles.     

Identification of low level gamma-irradiation of meats by high sensitivity comet assay

The detection of low levels of irradiation in meats (pork, beef, and chicken) using the new comet assay was investigated in order to assess the capability of the procedure. The new assay includes a process that improves its sensitivity to irradiation and a novel evaluation system for each slide (influence score and comet-type distribution). Samples used were purchased at retailers and were irradiated at 0.5 and 2 kGy at 0°C. The samples were processed to obtain comets. Slides were evaluated by typing comets, calculating the influence score and analyzing the comet-type distribution chart of shown on the slide. Influence scores of beef, pork, and chicken at 0 kGy were 287(SD=8.0), 305 (SD=12.9), and 320 (SD=21.0), respectively. Those at 500 Gy, were 305 (SD=5.3), 347 (SD=10.6), and 364 (12.6), respectively. Irradiation levels in food were successfully determined. Sensitivity to irradiation differed among samples (chicken>pork>beef).     

Enthalpies of solution in water of urotropine as function of concentration and temperature

Enthalpies of solution of Hexamethylenetetramine in water at several molal concentrations and at four temperatures (278.15, 288.15, 298.15, and 308.15) K were determined. The values of enthalpy of solution at infinite dilution were combined with the enthalpy of sublimation to get the corresponding enthalpies of hydration. The change in heat capacity at infinite dilution was calculated.     

Adsorption of benzoic acid onto high specific area activated carbon cloth

The adsorption of benzoic acid from aqueous solution onto high area carbon cloth at different pH values has been studied. Over a period of 125 min the adsorption process was found to follow a first-order kinetics and the rate constants were determined for the adsorption of benzoic acid at pH 2.0, 3.7, 5.3, 9.1, and 11.0. The extents of adsorption and the percentage coverage of carbon cloth surfaces were calculated at 125 min of adsorption. Adsorption isotherms at pH values of 2.0, 3.7, and 11.0 were derived at 25 degrees C. Isotherm data were treated according to Langmuir and Freundlich equations and the parameters of these equations were evaluated by regression analysis. The fit of experimental isotherm data to both equations was good. It was found that both the adsorption rate and the extent of adsorption at 125 min were the highest at pH 3.7 and decreased at higher or lower pH values. The types of interactions governing in the adsorption processes are discussed considering the surface charge and the dissociation of benzoic acid at different pH values.     

Effect of storage temperature on degradation of methidathion in fortified orange and peach juices

The effect of storage temperature on methidathion degradation in orange and peach juices was studied. The insecticide was aseptically added to packed orange and peach juices, which were stored at 40, 15, and 0 degrees C. Samples were taken at regular intervals and examined for residues of methidathion. Residues were determined with a simple gas chromatographic method; recoveries of methidathion from orange and peach juices ranged from 88.1 to 110% for both juices, and the limits of determination were 0.004 and 0.003 mg/kg, respectively. The experimental data were used to evaluate rate constants, half-lives, and times required to reach legal maximum residue limits, and activation energies for the decomposition of methidathion in orange and peach juices. Storage of fruit juices in refrigerated rooms greatly extended the half-life of methidathion beyond that of methidathion in samples stored at higher temperatures. Half-life values for methidathion in orange and peach juices, respectively, were 4.1 and 3.8 days for storage at 40 degrees C, 115 and 113 days for storage at 15 degrees C, and 330 and 385 days for storage at 0 degrees C. Activation energies for methidathion degradation in orange and peach juices were 22.6 and 21.7 kcal/mol, respectively.     

煤油自点火特性的实验研究

在加热激波管中利用反射激波点火,采用壁端压力和CH*发射光作为点火指示信号,测量了气相煤油/空气混合物的点火延时,点火温度为1100-1500K,压力为2.0×105和4.0×105Pa,化学计量比(Φ)为0.2、1.0和2.0.分析了点火温度、压力和化学计量比对点火延时的影响.结果显示,化学计量比为1.0和2.0时活化能几乎是相同的,但与化学计量比为0.2时的活化能差异很大,拟合得到了不同化学计量比条件下点火延时随温度变化的关系式.点火延时与已有的动力学机理进行对比,实验结果与Honnet等人的动力学机理吻合得很好.对不同化学计量比条件下的反应进行了敏感度分析,结果表明在化学计量比为0.2时,对点火延时敏感的关键反应与化学计量比为1.0时的有很大差异.     

增容剂SB对LDPE/PS共混物形态的影响

研究了不同温度和转速下苯乙烯 -丁二烯二嵌段共聚物 (SB)低密度聚乙烯 聚苯乙烯共混物形态和分散相颗粒尺寸的影响。结果表明 ,未加入SB的共混物在 1 50℃时的分散相颗粒尺寸比 2 0 0℃粗大 ,形态极不规则 :加入SB的共混物在 1 50℃时颗粒尺寸比 2 0 0℃时稍小 ,但形态变化不大。在 1 50℃ ,转速从 3 0r min至 1 0 0r min时 ,未加入SB的共混物的分散相颗粒尺寸迅速减小 ,而加入SB的共混物在 3 0r min时达到平衡颗粒尺寸 ,继续增加转速 ,形态和颗粒尺寸没有明显变化。     

Study on fluorometric discrimination of phytoplankton based on time-series vectors of wavelet transform

The feasibility of using time domain of wavelet transform as characteristics to establish a fluorometric discrimination method of phytoplankton was discussed. Twelve phytoplankton species belonging to nine genera of five divisions were studied. Five steps were introduced: firstly, the feasibility of utilizing 3D fluorescence spectra (3D-FS) to discriminate phytoplankton was discussed; the relative standard deviation (RSD) and included angle cosine (IAC) were used as the test criterion. 3D-FS had such potentials, for most RSD were <5% and most IAC were >0.990. Secondly, the 3D-FS were decomposed by db7 wavelet and time-series vectors (TSVs) were generated. Thirdly, the optimal characteristic spectra (OCS) were selected from the TSV by Bayesian linear discriminant analysis (BLDA). The ability of OCS to classify phytoplankton was tested, and the correct classification ratios (CCRs) at different levels were obtained. Most CCRs were 90–100% at the species level. They were >98% at the genus level, and >99% at the division level. Fourthly, the growth and light stability of the OCS were tested. Both stabilities were high with lower RSD (<3%) and higher IAC (>0.999) compared with 3D-FS. Fifthly, a “database of reference spectra” consisting of 46 reference spectra was established by hierarchical cluster analysis (HCA). Based on this, the discrimination method of phytoplankton species was established by nonnegative least squares (NNLSs). Most reference spectra were representative to phytoplankton species; and had moderate anti-noise ability: With noise ≤10%, the correct discrimination ratios (CDRs) were >98% at the genus level and >99% at the division level. 20% noise was a larger interference which made CDRs down to 85% at the genus level and to 99% at the division level. A fluorometric discrimination method of phytoplankton could be established based on TSV of wavelet transform.     

Enthalpies of mixing of liquid alloys in the In-Pd-Sn system and the limiting binary systems

The partial and integral enthalpies of mixing of molten binary In-Pd (up to about 29 at.% Pd), In-Sn (entire compositional range) and Pd-Sn (up to about 53 at.% Pd) alloys were determined at 900 °C. A Calvet-type microcalorimeter was used for the measurements employing a drop calorimetric technique. Additionally, five sections in the ternary In-Pd-Sn system (compositions up to about 40 at.% Pd) were investigated at 900 °C. The ternary interaction parameters were fitted using the Redlich-Kister-Muggiano model for substitutional solutions. The isoenthalpy curves for In-Pd-Sn at 900 °C were constructed for the integral molar enthalpy of mixing. Furthermore, the experimental results in the ternary system were compared with calculated values obtained by employing different binary extrapolation models.     

Volumetric properties of aqueous electrolytes at high temperature: Mixtures of LiOH and KOH up to 523 K

The densities of mixtures of aqueous lithium and potassium hydroxides were measured up to 3 molal, at 373, 423 and 523 K at pressures close to saturation. The partial molar volumes were calculated and the coefficients of the Pitzer equation for the mixtures were obtained. The mixing volume is positive at 373 K while at higher temperatures the mixture is ideal within experimental error, probably as a result of association of the lithium hydroxide.     

Characterization of two types of mitochondrial creatine kinase isolated from normal human cardiac muscle and brain tissue

Two types of mitochondrial creatine kinase (Mi-CK), sarcomeric (sMi-) and ubiquitous (uMi-)CKs, were isolated from normal human cardiac muscle and brain tissue, respectively, and their heterogeneity was characterized by means of isoelectric focusing (IEF). Octameric sMi-CK and uMi-CK were electrophoresed cathodic to cytoplasmic muscle-type creatine kinase isoenzyme (CK-MM) and dimeric Mi-CKs were found at the position of CK-MM on a cellulose acetate membrane. The electrophoretic mobilities of sMi-CK were similar to those of uMi-CK. Octameric sMi-CK was focused at pI 7.1-8.0 and dimeric forms at pI 6.55, 6.75, 6.85, and 6.95. New bands appearing at pI 6.65 and 6.75 after treatment of sMi-CK with carboxypeptidase B were found to be delysined forms. sMi-CK reacted with anti-sMi-CK antibodies, and the immune complexes were focused at pI 5.8. The Km value of sMi-CK for creatine phosphate (PCr) was 1.19 +/-0.20 mmol/L (mean +/- standard error), the activation energy (Ea) was 108.3+/-1.2 kJ/ mol, and the residual enzyme activity after heating at 45 degrees C for 20 min was 79.6+/-1.9%. On the other hand, octameric uMi-CK was focused at pI 7.1-7.9 and the dimeric forms were focused at pI 6.6, 6.7, 6.8, 6.9, and 7.0. Delysined forms were focused around pI 6.3, 6.4, 6.8, and 6.9. uMi-CK reacted with anti-sMi-CK antibodies, and the immune complexes were focused at pI 5.8. The Km value of uMi-CK for PCr was 1.07+/-0.03 mmol/L, Ea of uMi-CK was 110.0+/-0.9 kJ/mol, and the residual enzyme activity after heating at 45 degrees C for 20 min was 90.3+/-0.4%. The sMi-CK and uMi-CK were hybridized and the hybrid Mi-CK appeared at pI 6.78, 6.98, and 7.1-7.95. The pIs of the hybrid Mi-CK were between those of sMi-CK and uMi-CK. As described above, sMi-CK and uMi-CK were slightly different from each other with respect to the pI and some enzyme characteristics.     

The Influence of Heat Pre-Treatment on the Sorption of Water Vapour on Bentonite

Sorption isotherms of water vapour on bentonite from the Rokle locality of northwest Bohemia in the Czech Republic were measured and analysed after being treated with heat. Protracted sorption measurements were performed at 30∘C in the range of water vapour relative pressures between 0.12 and 0.94. Prior to sorption measurements, the bentonite samples were exposed to flowing dry nitrogen for 18 hours at 115, 220 and 300∘C. Compared to the sample heated at 115∘C, the bentonite samples that were treated at 220 and 300∘C exhibited a decrease in water vapour sorption capacity. This decrease in sorption capacity was accompanied by structural changes that were confirmed by X-ray diffraction analysis.     

肌红蛋白的同步荧光光谱

首次对肌红蛋白的同步荧光光谱进行了研究,并对肌红蛋白荧光峰予以归属。当△λ为20nm时,308nm处的荧光峰主要为酪氨酸残基的贡献,很小一部分是由色氨酸残基贡献的;△λ为40nm时,分别在322和596nm处观察到两个荧光峰,322nm的荧光峰为酪氨酸和色氨酸残基的共同贡献,596nm的荧光峰则归属为肌红蛋白分子中血红素的贡献。     

Physicochemical properties of series of cardanol polyoxyethylene ether carboxylates with different ethoxylation unit at the interface

Series of cardanol polyoxyethylene ether carboxylates were synthesized with biomass cardanol as material to study their physicochemical properties at the interface. The surface tensions of the cardanol nonionic-anionic surfactants were measured at 25?°C and the thermodynamic parameters of adsorption were also calculated. The surface activity and thermodynamic properties of the cardanol nonionic-anionic surfactants were correlated to their chemical structures. With increasing of the number of the ethoxylation unit in the hydrophilic group, a decrease in adsorption efficiency and an increase in surface tension at critical micelle concentration and thermodynamic free energy of adsoption were observed and were attributed to a decrease in adsorption of the cardanol nonionic-anionic surfactants at the interface. Series of the cardanol nonionic-anionic surfactants have good wettability and foaming property. The foaming capacity and the foaming stability of the solution of the cardanol nonionic-anionic surfactants increase by decreasing in the ethoxylation unit and by increasing the double bond of the hydrophobic group. The physicochemical properties of the cardanol nonionic-anionic surfactants at the interface are correlated to the chemical structures of the investigated surfactants, and there is the synergy effect between the nonionic hydrophilic group and the anionic hydrophilic group at the interface.     

Solubility of Propene in Water and in a Mineral Medium for the Cultivation of a XanthobacterStrain

Solubility measurements of propene in water at atmospheric pressure and at thirteen temperatures in the range 293.15–323.15 K were carried out with a precision of 0.3%, using an apparatus based on the saturation method. The mole fractions, at a gas partial pressure of 101.325 kPa, were fitted to a Clarke–Glew–Weiss equation, which was used to calculate the standard molar Gibbs energy, enthalpy, and entropy changes for the process of transferring the propene molecules from the gaseous to the water phase. Solubility measurements of propene in the growth medium ofXanthobacter Py2 at 298.15, 303.15, and 308.15 K were also carried out at atmospheric pressure. These experimental data, expressed in Ostwald coefficients at the total pressure of 101.325 kPa, were about 2% lower than their water counterparts.     

Solubility of 1-Butene in Water and in a Medium for Cultivation of a Bacterial Strain

Solubility measurements of 1-butene in water, from 20 to 50°C and at atmospheric pressure, were carried out using a Ben-Naim/Baer-type apparatus. The experimental results have a precision of about ±0.3%. Using accurate thermodynamic relations, the Ostwald coefficients at the experimental conditions and at infinite dilution, the mole fractions of the dissolved gas at the gas partial pressure of 101.325 kPa and the Henry coefficients at the water vapor pressure were calculated. The mole fraction of dissolved gas were fitted to the Clarke, Glew, and Weiss equation and thermodynamic quantities, standard molar Gibbs energy, entropy, and enthalpy changes, for the process of transferring the 1-butene molecules from the gaseous to the water phase, were computed. Moreover, solubility measurements of 1-butene in an aqueous medium for the cultivation of Xanthobacter Py2 in the same temperature range were also performed at atmospheric pressure. These solubility data are approximately 2.6% lower than those observed in pure water.     

热裂解气相色谱-质谱法测定葡萄干提取物的热裂解产物

50g葡萄干用70%乙醇溶液300mL在80℃回流提取3h,提取两次,过滤提取物,滤液减压浓缩至干。残渣用5200裂解仪在400℃,500℃,600℃,800℃下处理,在各裂解温度下得到的裂解产物导入仪器进行气相色谱-质谱分析。结果表明:主要裂解产物是糠醛、呋喃甲醇、5-甲基糠醛、5-羟甲基-2-呋喃甲醛、2,3-二氢-3,5-二羟基-6-甲基-4H-吡喃酮,这些裂解产物是赋予卷烟具有独特香味和较好口感的重要物质。     

玻碳电极电化学活化的原位FTIR反射光谱研究

用电化学原位FTIR反射光谱法研究了玻碳电极电化学活化过程中表面含氧功能团的生成及其表面过程。结果表明,该电极在高电位下氧化时生成了表面含氧功能团,并有一部分进一步氧化成CO_2,表面类醌基在随后的循环伏安扫描过程中部分转化成酚基,最终形成稳定的表面氧化还原对。表面类醌基同羟基之间存在强的氢键相互作用。     

Photopolymerization of methyl methacrylate with the use of iodine monobromide as photoinitiator

Iodine monobromide easily induces photopolymerization of methyl methacrylate (MMA) at 40°C under visible light. Initiator exponent and monomer exponent values were found to be 0.5 and 2, respectively, at low initiator concentrations, while the corresponding values at high initiator concentration conditions were zero and 3. The chain transfer constant of IBr at 40°C was found to be 13.0. Kinetic and other data indicate a radical polymerization mechanism involving complexation of monomer molecules with iodine monobromide prior to radical generation, and termination is believed to take place biomolecularly at low IBr concentrations and unimolecularly, involving reaction with the initiator, at high IBr concentrations (initiator termination).     

Recognition of melting of nanoparticle catalysts with cubically shaped Co3O4 nanoparticles

Cubically shaped cobalt oxide nanoparticle catalysts were used for the first time to investigate the melting of the nanoparticle catalysts responsible for the synthesis of silica nanocoils at 1050 degrees C and straight nanowires at 1100 degrees C. Cobalt nanoparticles remained morphologically highly anisotropic after the growth of nanocoils at 1050 degrees C, whereas they became predominately spherical after straight nanowires were made at 1100 degrees C. These results strongly indicated that cobalt nanoparticles responsible for the synthesis of straight nanowires were completely molten and that melting occurred to these nanoparticles between 1050 and 1100 degrees C.