Synthesis of three novel phosphorus-containing flame retardants and their application in epoxy resins

One symmetric diamine (4) and two symmetric phenols (5) and (6) were synthesized as phosphorus-containing flame retardants. The synthesis comprised a two-step procedure: the condensation of p-phenylenediamine with benzaldehyde, 4-hydroxybenzaldehyde and 2-hydroxybenzaldehyde respectively, followed by the addition of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide to the imine linkage. The structures of (4)-(6) were characterized by FTIR, NMR and mass spectra. (4)-(6) served as co-curing agents of diaminodiphenylmethane for epoxy resins, and epoxy thermosets exhibited excellent flame retardancy, moderate changes in glass transition temperature (T_g) and thermal stability. When the phosphorus content reached 1.0 wt.%, the epoxy resin system met the UL-94 V-0 classification and the limiting oxygen index (LOI) reached more than 35.6, probably because of the nitrogen-phosphorus synergistic effect.     

Novel flame retardancy effects of DOPO-POSS on epoxy resins

A series of flame retarded epoxy resins (EP) was prepared with a novel polyhedral oligomeric silsesquioxane containing 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO-POSS). The flame retardancy of these EPs was tested by the LOI, UL-94, which indicates that DOPO-POSS has meaningful effects on the flame retardancy of EP composites. 2.5 wt.% DOPO-POSS incorporation into epoxy resin (EP-2.5), results in a LOI value 30.2 and UL-94 V-1 (t₁ = 8 s and t₂ = 3 s) rating. Moreover, self-extinguishing effect through the pyrolytic gases spurt is observed in UL-94 test for the EP-2.5. The pyrolytic gases and thermal stability of epoxy resins with and without DOPO-POSS were detected by TGA-FTIR under air atmosphere. Releases of gaseous species are found to be similar for the pure EP and EP-2.5. The details of fire behaviour, such as TTI, HRR, p-HRR, TSR, SEA, COPR, CO₂PR, and TML, were tested by cone calorimeter. It is notable that 2.5 wt.% DOPO-POSS could make COPR and CO₂PR reach a maximum, which could explain the blowing-out extinguishing effect.     

Metal compound-enhanced flame retardancy of intumescent epoxy resins containing ammonium polyphosphate

A series of intumescent flame-retardant epoxy resins (IFR-EPs) were prepared only by adding a 5 wt% total loading of ammonium polyphosphate (APP) and metal compounds. All the samples could achieve V-0 rating and did not generate dripping during UL-94 testing. The limiting oxygen index (LOI) values of the samples with 4.83 wt% APP and 0.17 wt% CoSA increase from 27.1 to 29.4, compared with epoxy resin containing 5 wt% APP. The samples also showed excellent water resistance of flame retardancy in 30 °C and 70 °C water for 168 h. The LOI results show that the composition of metal compounds (metal ions and ligands/anions) and the mass ratios of APP to metal compounds affect the flame retardancy of the samples. TG results indicate that the catalytic effect of CoSA on the decomposition of both APP and the epoxy resins containing APP is better than that of CuSAO. The fire behavior of epoxy resin and epoxy resins containing APP with/without CoSA were investigated by cone calorimeter. Cone calorimeter parameters of the samples such as HRR, THR, TSP and COP indicate that the addition of APP and CoSA improves the fire safety of epoxy resin significantly, and CoSA shows an obvious catalytic effect.     

Kinetics study of thermal decomposition of epoxy resins containing flame retardant components

Hyperbranched polyphosphate ester (HPPE) and phenolic melamine (PM) were blended in different ratios with a commercial epoxy resin to obtain a series of flame retardant resins. The thermal decomposition mechanism of their cured products in air was studied by thermogravimetric analysis and in situ Fourier-transform infrared spectroscopy. The degradation behaviours of epoxy resins containing various flame retardant components were found to be greatly changed. The incorporation of phosphorus and nitrogen compounds improved the thermal stability at elevated temperature. The kinetics of thermal decomposition was evaluated by Kissinger method, Flynn-Wall-Ozawa method and Horowitz-Metzger method. The results showed that the activation energy at lower degree of the degradation decreased by the incorporation of flame retardant components, while increased at higher degree of the degradation.     

Preparation of phosphorus-containing cyanate resin with low curing temperature while excellent flame resistance and dielectric properties

A novel cyanate resin was prepared by the reaction of 10-(2,5-Dihydroxyphenyl)-10-H-9-oxa-10-phospha-phenantbrene-10-oxide (DOPO-HQ) and 2, 2-Bis (4-cyanatophenyl) propane (BACY) when trace of cobalt(III) acetylacetonate(CoAt(III)) was added, The curing behavior during the reaction of DOPO-HQ/BACY/CoAt(III) system was analyzed by gelation time (GT), differential scanning calorimetry (DSC) and Fourier transformation infrared spectrometry (FTIR), respectively. Compared with the BACY/CoAt(III) system (GT = 1239?s, T_p (exothermic peak temperature) = 215?°C), the GT of DOPO-HQ/BACY/CoAt(III) system is 110?s at 180?°C, and the T_p is 154?°C when containing 10?wt % DOPO-HQ. The limit oxygen index (LOI) and vertical burning test (UL-94) demonstrate that the flame retardancy of BACY resin is improved by DOPO-HQ. Specifically, the DOPO-HQ/BACY resin prepared by a mass ratio of DOPO-HQ: BACY = 10:90 has a LOI value of 33.1% and a UL-94 of V-0 rating, while the LOI value of BACY resin is 28.5% and UL-94 is no rating. In addition, the DOPO-HQ/BACY resin containing 10?wt % DOPO-HQ has excellent dielectric properties, the dielectric constant (D_k) is 2.69 and dielectric loss (D_f) is 0.007. The as-synthesized DOPO-HQ/BACY resin shows promising application prospect as electronic packaging materials.     

Flame retardant epoxy polymers based on all phosphorus-containing components

A phosphorus-containing epoxy resin, bis(3-t-butyl-4-glycidyloxyphenyl-2,4-di-t-butylphenyl)resorcinol diphosphate, was synthesized and subsequently cured with non-phosphorus containing amines, and/or novel phosphorus-containing aromatic or polyoxyalkylene amines. Chemical structures of these materials were characterized with FTIR, NMR, elemental analysis, and amine titration. The introduction of soft -P-O- linkage, polyoxyalkyene, or hard aromatic group into the backbones of the synthesized phosphorus-containing amines provides epoxy polymers with high phosphorus contents and tailored flexibility. Thermal analysis of differential scanning calorimeter and thermal gravimetric analysis (TGA) reveals that these resulted epoxy polymers possess moderate T_gs and thermal stability. Furthermore, high char yields in TGA analysis and high limited oxygen index values indicate that these phosphorus-containing epoxy polymers possess excellent flame retardant properties.     

A quantitative study of carbon monoxide and carbon dioxide evolution during thermal degradation of flame retarded epoxy resins

Thermogravimetric analysis (TGA) combined with infrared analysis of the evolved gases analysis (EGA) has been used to study the thermal degradation behaviour of epoxy resin both in air and nitrogen. The mass loss as a function of temperature has been correlated with the evolution of carbon monoxide (CO) and carbon dioxide (CO₂), and oxygen consumption as measured using an oxygen analyser. An analytical technique has been developed to quantitatively measure the carbon monoxide and dioxide gases evolved. The effect of a range of flame retardants containing phosphorus, nitrogen and halogen elements on CO and CO₂ evolution during thermal degradation of flame retarded epoxy resins has also been observed.     

Preparation, thermal properties and flame retardancy of phosphorus- and silicon-containing epoxy resins

Phosphorus- and silicon-containing epoxy resins were prepared from (2,5-dihydroxyphenyl)diphenyl phosphine oxide (Gly-HPO), diglycidyloxy methylphenyl silane (DGMPS) and 1,4-bis(glycidyloxydimethyl silyl)-benzene (BGDMSB) as epoxy monomers and diaminodiphenylmethane (DDM), bis(3-aminophenyl)methyl phosphine oxide (BAMPO) and bis(4-aminophenoxy)dimethyl silane (APDS) as curing agents. Epoxy resins with different phosphorus and silicon content were obtained. Their thermal, dynamic mechanical and flame retardant properties were evaluated. The high LOI values confirmed that epoxy resins containing hetero-atoms are effective flame retardants, but a synergistic efficiency of phosphorus and silicon on flame retardation was not observed.     

High impact resistance epoxy resins by incorporation of quadruply hydrogen bonded supramolecular polymers

A bisphenol A based epoxy was incorporated with a quadruply hydrogen bonded supramolecular polymer as a toughening agent to prepare a composite epoxy resin with higher impact resistance. The supramolecular polymer comprising poly-(propylene glycol) bis(2-aminopropyl) ether chains and 2-ureido-4[1H]-pyrimidinone moieties (UPy) self-assembled into spherical domains with sizes of 300 nm to 600 nm in diameter by micro phase separation in bulk epoxy matrixes. A significant improvement of 300% in impact resistance of the supramolecular polymer incorporated epoxy resin was obtained when the content of supramolecular polymer was 10 wt%. Tensile tests showed that the mechanical properties of the modified epoxy resin containing the hydrogen-bonded supramolecular polymers are also improved compared with those of the neat epoxy resin.     

Synthesis, characterization, and cure properties of phosphorus-containing epoxy resins for flame retardance

An organophosphorus compound, 10-(2,5-dihydroxyl phenyl)-9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DHPDOPO), was synthesized through the reaction of 9,10-dihydro-9-oxa-10-phosphaphnanthrene-10-oxide (DOPO) and p-benzoquinone, and characterized by elemental analysis, Fourier transform infrared spectrum (FTIR), and ¹H-NMR and ³¹P-NMR spectroscopes. Consequently, the phosphorus-containing epoxy resins with phosphorus content of 1 and 2 wt.% were prepared via the reaction of diglycidyl ether of bisphenol-A with DHPDOPO and bisphenol-A, and confirmed with FTIR and gel permeation chromatography (GPC). Phenolic melamine, novolak, and dicyanodiamide (DICY) were used as curing agents to prepare the thermosetted resins with the control and the phosphorus-containing epoxy resins. Thermal properties and thermal degradation behaviors of these the thermosetted resins were investigated by using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Phenolic melamine-cured resins exhibited higher glass transition temperatures than the other cured resins due to the high rigidity of their molecular chain. TGA studies demonstrated that the decomposition temperatures of the novolak-cured resins were higher than those of the others. A synergistic effect from the combination of the phosphorus-containing epoxy resin and the nitrogen-containing curing agent can result in a great improvement of the flame retardance for their thermosetted resins.     

Silicon-containing flame retardant epoxy resins: Synthesis, characterization and properties

Epoxy resins with different silicon contents were prepared from silicon-containing epoxides or silicon-containing prepolymers by curing with 4,4′-diaminodiphenylmethane. The reactivity of the silicon-based compounds toward amine curing agents was higher than that of the conventional epoxy resins. The T_g of the resulting thermosets was moderate and decreased when the silicon content increased. The onset decomposition temperatures decreased and the char yields increased when the silicon content increased. Epoxy resins had a high LOI value, according to the efficiency of silicon in improving flame retardance.     

A flame-retardant epoxy resin based on a reactive phosphorus-containing monomer of DODPP and its thermal and flame-retardant properties

A flame-retardant epoxy resin (EP) was synthesized based on a novel reactive phosphorus-containing monomer, 4-[(5,5-dimethyl-2-oxide-1,3,2-dioxaphosphorinan-4-yl)oxy]-phenol (DODPP), and its structures were characterized by FTIR, ¹H NMR and ³¹P NMR spectra. The DODPP-EP₃/LWPA (low molecular weight polyamide), which contains 2.5% phosphorus, can reach UL-94 V-0 rating and a limiting oxygen index (LOI) value of 30.2%. The thermal properties and burning behaviours of cured epoxy resins were investigated by differential scanning calorimeter (DSC), thermogravimetry (TG), LOI, UL-94 tests and cone calorimetry. The morphologies of residues of cured epoxy resins were investigated by scanning electron microscopy (SEM). DSC shows that the glass-transition temperatures of cured epoxy resins decrease with increasing phosphorus content. TGA shows that the onset decomposition temperatures and the maximum-rate decomposition temperatures decrease, while char yields increase, with the increase of phosphorus content. The data from the cone calorimeter tests give the evidence that heat release rate (HRR), peak heat release rate (PHRR), average heat release rate (Av-HRR), average mass loss rate (Av-MLR) and the fire growth rate index (FIGRA) decrease significantly for DODPP-EP₃/LWPA. SEM shows that the DODPP-EP₃/LWPA forms lacunaris and compact charred layers which inhibit the transmission of heat during combustion.     

The non-halogen flame retardant epoxy resin based on a novel compound with phosphaphenanthrene and cyclotriphosphazene double functional groups

A novel flame retardant additive hexa-(phosphaphenanthrene -hydroxyl-methyl-phenoxyl)-cyclotriphosphazene (HAP-DOPO) with phosphazene and phosphaphenanthrene double functional groups has been synthesized from hexa-chloro-cyclotriphosphazene, 4-hydroxy-benzaldehyde and 9,10-dihydro-9-oxa-10- phosphaphenanthrene 10-oxide(DOPO). The structure of HAP-DOPO was characterized by Fourier transformed infrared (FT-IR) spectroscopy and ¹H nuclear magnetic resonance (¹H NMR) and ³¹P nuclear magnetic resonance (³¹P NMR). The additive HAP-DOPO was blended into diglycidyl ether of bisphenol-A (DGEBA) to prepare flame retardant epoxy resins. The flame retardant properties and thermal properties of the epoxy resins cured by 4, 4′-Diamino-diphenyl sulfone (DDS) were investigated from the differential scanning calorimeter (DSC), the thermogravimetric analysis (TGA), UL94 test, the limiting oxygen index (LOI) test and Cone calorimeter. Compared to traditional DOPO-DGEBA and ODOPB-DGEBA thermosets, the HAP-DOPO/DGEBA thermosets have higher T_gs at the same UL94 V-0 flammability rating for their higher crosslinking density and have higher char yield and lower pk-HRR at same 1.2 wt.% phosphorus content which confirm that HAP-DOPO has higher flame retardant efficiency on thermosets. The scanning electron microscopy (SEM) results shows that HAP-DOPO in DGEBA/DDS system obviously accelerate formation of the sealing, stronger and phosphorus-rich char layer to improve flame retardant properties of matrix during combustion.     

Photopolymerization and thermal behaviors of acrylated benzenephosphonates/epoxy acrylate as flame retardant resins

Di(acryloyloxyethyl) benzenephosphonate (DABP) and acryloyloxyethyl phenyl benzenephosphonate (APBP) were synthesized starting from phenylphosphonic dichloride, and characterized by FT-IR and ¹H NMR. DABP and APBP were blended in the ratios of 10-50 wt.% with a commercial epoxy acrylate oligomer (EB600) to obtain a series of flame retardant UV-curable formulations. The viscosity of the formulations greatly reduced by the addition of the reactive monomers, whereas the photopolymerization rate according to the photo-DSC analysis increased. The thermal degradation behavior and flame retardancy of the UV-cured films were investigated by thermogravimetric analysis and the limiting oxygen index (LOI). The results revealed that the blended epoxy acrylates with DABP or APBP possess improved thermal stability at elevated temperature and have higher char yields, together with higher LOI values. The data from dynamic mechanical thermal analysis showed that DABP and APBP have good miscibility with EB600. The crosslink density increased along with the content of DABP or APBP in the blend, whereas the glass-transition temperatures of the blended resins decreased compared to pure cured EB600.     

Pyrolysis and fire behaviour of epoxy resin composites based on a phosphorus-containing polyhedral oligomeric silsesquioxane (DOPO-POSS)

The pyrolysis and fire behaviour of epoxy resin (EP) composites based on a novel polyhedral oligomeric silsesquioxane containing 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO-POSS) and diglycidyl ether of bisphenol A (DGEBA) have been investigated. The pre-reaction between the hydroxyl groups of DOPO-POSS and the epoxy groups of DGEBA at 140 °C is confirmed by FTIR, which means that DOPO-POSS molecules of hydroxyl group could easily disperse into the epoxy resin at the molecular level. The EP composites with the DOPO-POSS were prepared through a curing agent, m-phenylenediamine (m-PDA). The morphologies of the EP composites observed by SEM indicate that DOPO-POSS disperses with nano-scale particles in the EP networks, which implies good compatibility between them. The thermal properties and pyrolysis of the EP composites were analyzed by DSC and TGA, TGA-FTIR, and TGA-MS. The analysis indicates that the DOPO-POSS change the decomposition pathways of the epoxy resin and increase its residue at high temperature; moreover, the release of phosphorous products in the gas phase and the existence of Si-O and P-O structures in the residue Is noted. The fire behaviour of the EP composites was evaluated by cone calorimeter (CONE). The CONE tests show that incorporation of DOPO-POSS into epoxy resin can significantly improve the flame retardancy of EP composites. SEM and XPS were used to explore micro-structures and chemical components of the char from CONE tests of the EP composites, they support the view that DOPO-POSS makes the char strong with the involvement of Si-O and P-O structures.     

Thermal degradation of a reactive flame retardant based on cyclotriphosphazene and its blend with DGEBA epoxy resin

Hexaglycidyl cyclotriphosphazene (HGCP) was synthesized, and characterized by FTIR, ³¹P, ¹H, and ¹³C-NMR. This compound was used as a reactive flame retardant to blend with commercial epoxy resin DGEBA (Diglycidyl ether of bisphenol A). Its effect on the DGEBA decomposition pathways was characterized by studying both gas and solid phases produced during thermogravimetric analysis (TGA). The gases evolved during TGA in air were studied by means of thermogravimetry coupled with Fourier transform infrared spectroscopy (TG–FTIR), while the solid residues were analysed by FTIR and scanning electron microscopy (SEM). The results showed that HGCP presents a good dispersion in DGEBA, and the blend thermoset with 4,4′-methylene-dianiline (MDA) curing agent leads to a significant improvement of the thermal stability at elevated temperature with higher char yields compared with pure DGEBA thermoset with the same curing agent. Improvement has also been observed in the fire behaviour of blend sample.     

Studies on the effect of different levels of toughener and flame retardants on thermal stability of epoxy resin

A thermoplastic toughener, polyether sulphone (PES) and a number of different types of flame retardants were blended in different ratios with a commercial epoxy resin triglycidyl-p-aminophenol (TGAP) and 4,4-diamino diphenyl sulphone (DDS) a curing agent. The effect of type and levels of flame retardants (FR) and the toughening agent on the curing, thermal decomposition and char oxidation behaviour of the epoxy resin was studied by the simultaneous differential thermal analysis and thermogravimetric techniques. It was observed that the toughener slightly increases the curing temperature (by up to 20 °C) but had minimal effect on the decomposition temperature of the resin. Flame retardants, however affected all stages depending upon the type of flame retardant used. The curing peak for samples containing tougher and flame retardants although slightly changed depending upon the type of FR, was not more than ± 20 °C compared to that of samples containing toughener only. All flame retardants lowered the decomposition temperature of the epoxy resin. Phosphorus- and nitrogen-containing flame retardants reduced the char oxidation leading to more residual char, whereas halogen- containing flame retardants had less effect on this stage.     

Synthesis, characterization, thermal properties and flame retardancy of a novel nonflammable phosphazene-based epoxy resin

Hexakis(4-hydroxyphenoxy)-cyclotriphosphazene (PN-OH) was synthesized through nucleophilic substitution of the chloride atoms of hexachlorocyclotriphosphazene and reduction of the aldehyde groups, and its chemical structure was characterized by elemental analysis, ¹H and ³¹P NMR, and Fourier transform infrared (FTIR) spectroscopy. A new phosphazene-based epoxy resin (PN-EP) was successfully synthesized through the reaction between diglycidyl ether of bisphenol-A (DGEBA) and PN-OH, and its chemical structure was confirmed by FTIR and gel permeation chromatography. Four PN-EP thermosets were obtained by curing with 4,4′-diaminodiphenylmethane (DDM), dicyandiamide (DICY), novolak and pyromellitic dianhydride (PMDA). The reactivity of PN-EP with the four curing agents presents an increase in the order of DDM, PMDA, novolak and DICY. An investigation on their thermal properties shows that the PN-EP thermosets achieve higher glass-transition and decomposition temperatures in comparison with the corresponding DGEBA ones while their char yields increase significantly. The PN-EP thermosets also exhibit excellent flame retardancy. The thermosets with novolak, DICY and PMDA achieve the LOI values above 30 and flammability rating of UL94 V-0, whereas the one with DDM reaches the V-1 rating. The nonflammable halogen-free epoxy resin synthesized in this study has potential applications in electric and electronic fields in consideration of the environment and human health.     

Synthesis and properties of phosphorus-containing bio-based epoxy resin from itaconic acid

A phosphorus-containing bio-based epoxy resin (EADI) was synthesized from itaconic acid (IA) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO). As a matrix, its cured epoxy network with methyl hexahydrophthalic anhydride (MHHPA) as the curing agent showed comparable glass-transition temperature and mechanical properties to diglycidyl ether in a bisphenol A (DGEBA) system as well as good flame retardancy with UL94 V-0 grade during a vertical burning test. As a reactive flame retardant, its flame-resistant effect on DGEBA/MHHPA system as well as its influence on the curing behavior and the thermal and mechanical properties of the modified epoxy resin were investigated. Results showed that after the introduction of EADI, not only were the flame retardancy determined by vertical burning test, LOI measurement, and thermogravimetric analysis significantly improved, but also the curing reactivity, glass transition temperature (T _g), initial degradation temperature for 5% weight loss (T _d(5%)), and flexural modulus of the cured system improved as well. EADI has great potential to be used as a green flame retardant in epoxy resin systems.