Poly(amide-6-b-ethylene oxide)/SAPO-34 mixed matrix membrane for CO2 separation

In this paper, poly(amide-6-b-ethylene oxide) (Pebax1657)/SAPO-34 mixed matrix membranes (MMMs) were prepared by solvent-evaporation method with acetic acid as a novel solvent. CO₂, N₂, CH₄ and H₂ permeation properties were investigated, and the physical properties of Pebax/SAPO-34 MMMs were characterized by XRD and SEM. At low SAPO-34 content, it was homogeneously distributed in the Pebax matrix, and then precipitated and agglomerated at high SAPO-34 content. The crystallinity of Pebax phase in Pebax/SAPO-34 MMMs decreased initially and then rebounded as a result of phase separation. With the increase of transmembrane pressure difference, CO₂ permeability was enhanced due to the effect of pressure-induced plasticization. Owing to the happening of stratification, the CO₂ permeability of Pebax/SAPO-34 MMMs (50 wt% SAPO-34) increased to 338 Barrer from 111 Barrer of pristine Pebax, while the selectivities of CO₂/CH₄ and CO₂/N₂ were almost unchanged. Compared with the pristine Pebax, the gas separation performances of Pebax/SAPO-34 MMMs were remarkably enhanced.     

A 2D Graphitic-Polytriaminopyrimidine (g-PTAP)/Poly(ether-block-amide) Mixed Matrix Membrane for CO2 Separation

Poly(ether-block-amide)/g-PTAP mixed matrix membranes (MMMs) were developed by incorporating different wt.% (1–10%) of a novel 2D g-PTAP nanofiller and its effects on membrane structure and gas permeability were studied. The novel 2D material g-PTAP was synthesized and characterized by various analytical techniques including field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and Raman spectroscopy. The fabricated MMMs were investigated to study the interaction and compatibility between Pebax and g-PTAP. The MMMs showed an effective integration of g-PTAP nanofiller into the Pebax matrix without affecting its thermal stability. Gas permeation experiments with MMMs showed improved CO₂ permeability and selectivity (CO₂/N₂) upon incorporation of g-PTAP in the Pebax polymer matrix. The maximum CO₂ permeability enhancement from 82.3 to 154.6 Barrer with highest CO₂/N₂ selectivity from 49.5 to 83.5 were found with 2.5 wt.% of nanofiller compared to neat Pebax membranes.     

Pebax/poly(vinyl alcohol) mixed matrix membrane incorporated by amine-functionalized graphene oxide for CO2 separation

Graphene oxide nanoparticles (GO) were firstly functionalized using p-phenylenediamine and then utilized as nanofillers to prepare poly(ether-block-amide) (Pebax®-1657)/poly(vinyl alcohol) (PVA-60000)-based mixed-matrix membranes. The modified GO as well as the fabricated mixed matrix membranes underwent some characterization analyses, including FTIR, TGA, XRD, FESEM, and EDX. The influence of amine-modified nanoparticles content (2, 4, and 6 wt%), and feed pressure on CO₂, CH₄, and N₂ permeabilitis and ideal CO₂/CH₄ and CO₂/N₂ selectivities values of the MMMs were investigated. The permeation experiments demonstrated that Pebax/PVA (10 and 15 wt%) blend membranes caused an increase in CO₂ permeability owing to the high affinity of polar CO₂ molecules to polar PVA segments. Moreover, the incorporation of 6 wt% amine-functionalized GO into the Pebax/PVA (10 wt%) and Pebax/PVA (15 wt%) blend polymer raised the CO₂ permeability and CO₂/CH₄ and CO₂/N₂ selectivity by nearly 43%, 28%, and 37%, respectively, due to the higher CO₂ adsorption capacity of the amine-functionalized GO.     

Selective CO2 capture through microporous Tb(BTC)(H2O).(DMF)1.1 MOF as an additive in novel MMMs fabricated from Matrimid® 5218

Mixed matrix membranes (MMMs) fabricated with porous metal organic frame works have enhanced the separation performance of polymer membranes. In this context microporous 3D Tb(BTC)(H₂O).(DMF)_1.1 MOF was incorporated into pristine Matrimid® with loadings of 10, 20 and 30 weight percentages. SEM micrographs indicated proper distribution of filler in the Matrimid and no interfacial voids were observed. Gas permeation studies evidenced the CO₂ permeability to be 13.2 (82.32%) and 18.34 (153.31%) and 25.86 Barrer for 10, 20 and 30 wt% MMMs respectively. The 257.18% increase in CO₂ permeability of 30 wt% MMM than methane was attributed to polar nature of CO₂, its smaller kinetic diameter, condensability, and larger solubility within the Matrimid matrix than non – polar and larger CH₄ molecules.Addition of filler influenced the pure gas selectivity of all MMMs positively. So, 30 wt% MMM exhibited the highest 58.04% increase in selectivity that was attributed to the molecular sieving property of the filler and the size exclusion phenomena as followed by CH₄ and CO₂. The high values of mixed and pure gas selectivity were obtained upon increasing filler concentration. The commercial applicability of these MMMs was tested by checking their selectivity under increased feed concentrations of CO₂ and checking permeability and selectivities at high temperatures. The study depicted that, competitive sorption of gases, prevalence of size exclusion phenomena and polymer chains relaxation at higher temperature were responsible for low gas selectivity. MMM with 30 wt% of MOF lied close to Robson’s Upper bound 2008 that indicated its good separation potential.     

High performance of PES-GNs MMMs for gas separation and selectivity

In this study, graphene nanosheets (GNs) were incorporated into polyethersulfone (PES) by phase inversion approach for preparing PES-GNs mixed matrix membranes (MMMs). To investigate the impact of filler content on membrane surface morphology, thermal stability, chemical composition, porosity and mechanical properties, MMMs were constructed with various GNs loadings (0.01, 0.02, 0.03, and 0.04 wt%). ?The performance of prepared MMMs was tested for separation and selectivity of CO₂, N₂, H₂ and CH₄ gases at various pressures from 1 to 6 bar and temperature varying from 20 to 60 °C. It was observed that, compared to the pristine PES membrane, the prepared MMMs significantly improved the gas separation and selectivity performance with adequate mechanical stability. The permeability of CO₂, N₂, H₂ and CH₄ for the PES + 0.04 wt% GNs increases from 9 to 2246, 11 to 2235, 9 to 7151, and 3 to 4176 Barrer respectively, as compared with pure PES membrane at 1 bar and 20 °C due to improving the membrane absorption and porosity. In addition, by increasing the pressure, the permeability and selectivity of CO₂, N₂, H₂ and CH₄ are increased due to the increased driving force for the transport of gas via membranes. Furthermore, the permeability of CO₂, N₂, H₂ and CH₄ increased by increasing the temperature from 20 to 60 °C due to the plasticization in the membranes and the improvement in polymer chain movement. This result proved that the prepared membranes can be used for gas separation applications.     

The beneficial impacts of functional groups of CNT on structure and gas separation properties of PEBA mixed matrix membranes

Incompatibility between filler and polymer chains accompanied by particle agglomeration has a detrimental effect on the performance of mixed matrix membranes (MMMs). To obviate intermolecular forces of different additives, functional groups (-COOH, –NCO, and –NH₂) were grafted on the surface of multi-walled carbon nanotubes (MWCNTs) which were then incorporated as fillers in the poly(ether-block-amide) (PEBA) polymeric matrix in the range of 0.1–1 wt% loading. CO₂ permeability and ideal CO₂/N₂ and CO₂/CH₄ selectivity of MMMs was compared with the neat membrane, and the results revealed favorable enhancement and surpassed CO₂/N₂ Robeson's upper bound under 4–10 bar in the range of 15–55 °C. Mixed gas separation performance of MMMs, which is of vital importance in industrial applications, was also investigated. The results indicate that MWCNT-NCO created superior grafts with the polymer chains, and MMMs with this additive had a better gas separation performance with high mechanical and thermal stability.     

Preparation of mixed matrix membranes based on polyimide and aminated graphene oxide for CO2 separation

The aminated graphene oxide (GO) was prepared by the functionalization of pristine GO with ethylenediamine and then dispersed into the poly(amic acid) (the precursor of polyimide [PI]) solution followed by the chemical imidization to successfully fabricate the PI/amine‐functionalized GO mixed matrix membranes (MMMs) using in‐situ polymerization method. Chemical structure and morphology of the GO before and after amine modification were characterized by scanning electron microscopy, Raman spectrum, Fourier transform infrared, and X‐ray photoelectron spectroscopy. Scanning electron microscopy indicated that fine dispersion of GO throughout PI matrix was achieved, which indicates that the in‐situ polymerization approach can enhance the interfacial interaction between the GO and the PI matrix, and then improve the dispersion of carbon material in the polymer matrix. Compared with the conventional solution mixture method, the MMMs prepared with in‐situ polymerization method showed excellent CO₂ permeability and CO₂/N₂ selectivity. The MMMs doped with 3 wt.% aminated GO exhibited maximum gas separation performance with a CO₂ permeability of 12.34 Barrer and a CO₂/N₂ selectivity of 38.56. These results suggest that the amino groups on GO have strong interaction with the CO₂ molecules, which can significantly increase the solubility of polar gas. Our results provide an easy and efficient way to prepare MMMs with good mechanical behavior and excellent gas separation performance.     

Poly(amide-6-b-ethylene oxide)/SAPO-34 mixed ma-trix membrane for CO2separation

In this paper, poly（amide-6-b-ethylene oxide） （Pebax1657）/SAPO-34 mixed matrix membranes （MMMs） were prepared by solvent-evaporation method with acetic acid as a novel solvent. CO2, N2, CH4 and H2 permeation properties were investigated, and the physical properties of Pebax/SAPO-34 MMMs were characterized by XRD and SEM. At low SAPO-34 content, it was homogeneously distributed in the Pebax ma- trix, and then precipitated and agglomerated at high SAPO-34 content. The crystallinity of Pebax phase in Pebax/SAPO-34 MMMs decreased initially and then rebounded as a result of phase separation. With the increase of transmembrane pressure difference, CO2 permeability was en- hanced due to the effect of pressure-induced plasticization. Owing to the happening of stratification, the CO2 permeability of Pebax/SAPO-34 MMMs （50 wt% SAPO-34） increased to 338 Barrer from 111 Barrer of pristine Pebax, while the selectivities of CO2/CH4 and CO2/N2 were almost unchanged. Compared with the pristine Pebax, the gas separation performances of Pebax/SAPO-34 MMMs were remarkably enhanced.     

Membranes with Fast and Selective Gas‐Transport Channels of Laminar Graphene Oxide for Efficient CO2 Capture

Graphene oxide (GO) nanosheets were engineered to be assembled into laminar structures having fast and selective transport channels for gas separation. With molecular‐sieving interlayer spaces and straight diffusion pathways, the GO laminates endowed as‐prepared membranes with excellent preferential CO₂ permeation performance (CO₂ permeability: 100 Barrer, CO₂/N₂ selectivity: 91) and extraordinary operational stability (>6000 min), which are attractive for implementation of practical CO₂ capture.     

Preparation and characterization of (Pebax 1657 + silica nanoparticle)/PVC mixed matrix composite membrane for CO<Subscript>2</Subscript>/N<Subscript>2</Subscript> separation

In this work, the films of poly(ether-block-amide) (Pebax 1657) and hydrophilic/hydrophobic silica nanoparticles (0–10 wt%) were coated on a poly(vinyl chloride) (PVC) ultrafiltration membrane to form new mixed matrix composite membranes (MMCMs) for CO₂/N₂ separation. The membranes were characterized by SEM, FTIR, DSC and XRD. Successful formation of a non-porous defect-free dense top layer with ~4 μm of thickness and also uniform dispersion of silica nanoparticles up to 8 wt% loading in Pebax matrix were confirmed by SEM images. The gas permeation results showed an increase in the permeance of all gases and an increase in ideal CO₂/N₂ selectivity with the increase in silica nanoparticle contents. Comparison between the incorporation of hydrophilic and hydrophobic silica nanoparticle into Pebax matrix revealed that the great enhancement of CO₂ solubility is the key factor for the performance improvement of Pebax + silica nanoparticle membranes. The best separation performance of the hydrophilic silica nanoparticle-incorporated Pebax/PVC membrane for pure gases (at 1 bar and 25 °C) was obtained with a CO₂ permeability of 124 barrer and an ideal CO₂/N₂ selectivity of 76, i.e., 63 and 35% higher than those of neat Pebax membrane, respectively. The corresponding values for hydrophobic silica nanoparticle-incorporated Pebax/PVC membrane were 107 barrer for CO₂ permeability and 61 for ideal CO₂/N₂ selectivity. Also the performances of MMCMs improved upon pressure increase (1–10 bar) owing to the shift in plasticizing effect of CO₂ towards the higher pressures. In addition, an increase in permeabilities with a decrease in ideal selectivity was observed upon temperature increase (25–50 °C) due to the intensification of chain mobility.     

Preparation of CO_2 selective composite membranes using Pebax/CuBTC/PEG-ran-PPG ternary system

Three phase Pebax~? MH 1657/PEG-ran-PPG/CuBTC(polymer/liquid/solid) was successfully deposited as a selective layer on a porous Polysulfone(PSF) support. In fact, the beneficial properties of PEG(high selectivity) with those of PPG(high permeability, amorphous) have been combined with superior properties of mixed matrix membrane(MMMs). The membranes were characterized by DSC, TGA and SEM, while CuBTC was characterized by CO_2 and CH_4adsorption test. Statistically based experimental design(central composite design, CCD) was applied to analyze and optimize the effect of PEG-ran-PPG(10–50 wt%) and CuBTC(0–20 wt%) mass contents on the CO_2 permeance and CO_2/CH_4 ideal selectivity. Based on the regression coefficients of the obtained models, the CO_2 permeance was notably influenced by PEG-ran-PPG,while CuBTC has the most significant effect on the CO_2/CH_4 ideal selectivity. Under the optimum conditions(PEG-ran-PPG: 32.76 wt% and CuBTC: 20 wt%), nearly 620% increase in the CO_2 permeance and43% enhancement in the CO_2/CH_4 ideal selectivity was observed compared to the neat Pebax. The effect of pressure(3, 9 and 15 bar) on the pure and mixed gas separation performance of the composite membranes was also investigated. The high solubility of CO_2 in the membranes resulted in the enhancement of CO_2 permeability with increase in gas pressure.     

Uniformly Distributed Mixed Matrix Membranes via a Solution Processable Strategy for Propylene/Propane Separation

Aggregation of filler particles during the formation of mixed matrix membranes is difficult to avoid when filler loadings exceed a 10–15 wt %. Such agglomeration usually leads to poor membrane performance. In this work, using a ZIF-67 metal–organic framework (MOF) as filler along with surface modification of Ag₄tz₄ to improve processability and selective olefin adsorption, we demonstrate that highly loaded with a very low agglomeration degree membranes can be synthesized displaying unmatched separation selectivity (39) for C₃H₆/C₃H₈ mixtures and high permeability rates (99 Barrer), far surpassing previous reports in the literature. Through molecular dynamics simulation, the enhanced compatibility between ZIF-67 and polymer matrix with adding Ag₄tz₄ was proven and the tendency in gas permeability and C₃H₆ selectivity in the mixed matrix membranes (MMMs) were well explained. More importantly, the membrane showed a wide range of pressure and temperature resistance, together with remarkable long-term stability (>900 h). The modification method might help solve interface issues in MMMs and can be extended to the fabrication of other fillers to achieve high performance MMMs for gas separation.     

Synthesis of a PEBAX-1074/ZnO nanocomposite membrane with improved CO_2 separation performance

In this investigation, polymeric nanocomposite membranes(PNMs) were prepared via incorporating zinc oxide(ZnO) into poly(ether-block-amide)(PEBAX-1074) polymer matrix with different loadings. The neat membrane and nanocomposite membranes were prepared via solution casting and solution blending methods, respectively. The fabricated membranes were characterized by field emission scanning electron microscopy(FESEM) to survey cross-sectional morphologies and thermal gravimetric analysis(TGA)to study thermal stability. Fourier transform infrared(FT-IR) and X-ray diffraction(XRD) analyses were also employed to identify variations of the chemical bonds and crystal structure of the membranes, respectively. Permeation of pure gases, CO_2, CH_4 and N_2 through the prepared neat and nanocomposite membranes was studied at pressures of 3–18 bar and temperature of 25 °C. The obtained results showed that the fabricated nanocomposite membranes exhibit better separation performance compared to the neat PEBAX membrane in terms of both permeability and selectivity. As an example, at temperature of 25 °C and pressure of 3 bar, CO_2 permeability, ideal CO_2/CH_4 and CO_2/N_2 selectivity values for the neat PEBAX membrane are 110.67 Barrer, 11.09 and 50.08, respectively, while those values are 152.27 Barrer,13.52 and 62.15 for PEBAX/ZnO nanocomposite membrane containing 8 wt% ZnO.     

Improvement of hardness and anti-corrosion behavior of mild steel by plasma sprayed coating of Al2O3/GO composite

A robust and fast non-transferred plasma torch method was employed for developing coating of alumina (A₂O₃) and alumina/graphene oxide (A₂O₃/GO) on mild steel. Micro Raman analysis of GO confirms its spectroscopic behavior. The energy band gap of GO was determined as 3.44 eV. The successful coating formation of A₂O₃ and A₂O₃/GO (0.5 wt%) on mild steel was confirmed by X-ray diffraction analysis. Microhardness of mild steel was found to increase about 43.75% after coating with A₂O₃/GO (0.5 wt%) composite. The microstructure of A₂O₃/GO (0.5 wt%) coated mild steel represents better quality of coating and improved structural behavior. Mild steel becomes more corrosive resistance by reduction of corrosion potential (less negative than −0.05 V) after A₂O₃/GO (0.5 wt%) coating on it.     

Enhancement on the permeation performance of polyimide mixed matrix membranes by incorporation of graphene oxide with different oxidation degrees

Graphene oxide (GO) with different oxidation degrees were synthesized by harsh oxidation of graphite using the improved Hummers method. The GO/polyimide (PI) mixed matrix membrane was successfully fabricated by in situ polymerization of PI monomers (3,3′,4,4′‐biphenyltetracarboxylic dianhydride and 4,4′‐diaminodiphenyl ether) with GO. The structure of GO was characterized by Fourier transform infrared, transmission electron microscopy, atomic force microscopy, X‐ray diffraction, and thermal gravimetric analysis–differential thermal analysis. The performance of different GO/PI mixed matrix membranes was evaluated by permeation experiments of CO₂/N₂ gas mixture (volume ratio, 1:9). Results showed that more polar functional groups were introduced to GO with the increase in oxidation degree of GO in the preparation process, producing fewer layers and more translucent structures. GO with higher oxidation degree has significant effect on its dispersion in the N,N‐dimethylacetamide solvent and polymer matrix materials. The permeability of GO/PI hybrid membranes for CO₂ and N₂ increased. The CO₂/N₂ permeation selectivity of membranes exhibited a trend of initial increase, followed by a decrease, with the increase in oxidation degree, when the same amount of GO was added. For GO with the same oxidation degree, the permeability and permeation selectivity of hybrid membrane initially increased, and then decreased with the addition content of GO. In the case of hybrid membrane containing 1 wt% monolayer GO, the maximum permeability and permeation selectivity of hybrid membranes for CO₂ were 14.3 and 4.2 times more than that of PI membrane without GO, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Designing GO Channels with High Selectivity for CO2/N2 Separation via Incorporating Metal Ions

Graphene oxide (GO) membranes holds great potential for high-performance CO₂ capture. Aiming at enhancing the CO₂ separation performance and structural stability of GO membranes, functionalizing GO channels with metal ions confers a promising strategy. In this study, we reported the fabrication of metal ion-incorporated GO membranes with remarkably improved CO₂/N₂ separation performance. The metal ions within GO channels contribute to facilitating CO₂ transport, decreasing N₂ solubility, hindering N₂ diffusion, and form multiple interactions with GO nanosheets. After introducing Mg²⁺ ions, the CO₂/N₂ separation factor of GO membrane is remarkably increased from 4 to 48.8 with the CO₂ permeance increases 1.5 times. Moreover, the separation performance of the GO-Mg²⁺ membranes shows an excellent long-term stability owing to the structural robustness. This study could provide insights into the regulation of the microstructure of metal ion-functionalized GO membranes for highly selective transport of specific molecules.     

Pebax‐Based Membrane Filled with Two‐Dimensional Mxene Nanosheets for Efficient CO2 Capture

Mixed matrix membranes (MMMs) made from inorganic fillers and polymers is a kind of promising candidate for gas separation. In this work, two‐dimensional MXene nanosheets were synthesized and incorporated into a polyether‐polyamide block copolymer (Pebax) matrix to fabricate MMM for CO₂ capture. The physicochemical properties of MXene nanosheets and MXene/Pebax membranes were studied systematically. The introduction of MXene nanosheets provided additional molecular transport channels and meanwhile enhanced the CO₂ adsorption capacity, thereby enhancing both the CO₂ peremance and CO₂/N₂ selectivity of Pebax membrane. The optimized MXene/Pebax membrane with a MXene loading of 0.15 wt % displayed a high separation performance with a CO₂ permeance of 21.6 GPU and a CO₂/N₂ selectivity of 72.5, showing potential application in CO₂ capture.     

Mixed Dimensional Nanostructure (UiO-66-Decorated MWCNT) as a Nanofiller in Mixed-Matrix Membranes for Enhanced CO2/CH4 Separation

Mixed-matrix membranes (MMMs) with combination of two distinct dimensional nanofillers (such as 1D-3D, 2D-3D, or 3D-3D, etc.) have drawn special attention for gas separation applications due to their concerted effects on gas permeation and mechanical properties. An amine-functionalized 1D multiwalled carbon nanotube (NH₂-MWCNT) with exceptional mechanical strength and rapid gas transport was crosslinked with an amine-functionalized 3D metal-organic framework (UiO-66-NH₂) with high CO₂ affinity in a Schiff base reaction. The resultant crosslinked mixed-dimensional nanostructure was used as a nanofiller in a polysulfone (PSf) polymer matrix to explore the underlying synergy between 1D and 3D nanostructures on the gas separation performance of MMMs. Cross-sectional scanning electron microscopy and mapping revealed the homogenous dispersion of UiO-66@MWCNT in the polymer matrix. The MMM containing 5.0 wt. % UiO-66@MWCNT demonstrated a superior permeability 8.3 Barrer as compared to the 4.2 Barrer of pure PSf membrane for CO₂. Moreover, the selectivity (CO₂/CH₄) of this MMM was enhanced to 39.5 from the 28.0 observed for pure PSf under similar conditions of pressure and temperature.     

ZIF-8 based polysulfone hollow fiber membranes for natural gas purification

Mixed matrix membranes (MMMs) have received worldwide attention for natural gas purification due to their superior performance in terms of permeability and selectivity. The zeolitic imidazole framework-8 (ZIF-8) blended polysulfone (PSf) membranes have been fabricated for natural gas purification. ZIF-8 was selected due to its low cost, remarkable thermal and chemical stabilities, and tunable microporous structure. The neat PSf hollow fiber membrane and mixed matrix hollow fiber membranes incorporated with the various ZIF-8 loadings up to 1.25% were fabricated. The prepared membranes were evaluated using field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), and gas separation performance. The low loading of ZIF-8 nanoparticles to the MMM improved thermal stability and glass transition temperature and yielded low surface roughness. MMMs were tested using pure gases with a significant improvement of 36% in CO₂ permeability and 28% in CO₂/CH₄ selectivity compared to the neat membrane. However, the high ZIF-8 loading reduced the separation performances. Moreover, CO₂/CH₄ selectivity decreased at elevated pressure (8 and 10 bar) due to CO₂-induced plasticization. Previously, the incorporation of ZIF-8 particles has primarily been subjected to the fabrication of flat sheet membranes, whereas this work focused on hollow fiber membranes which are rarely investigated. Hence, the promising results obtained at low feed pressure in this study demonstrated the potential of ZIF-8 based hollow fiber membrane for natural gas purification.     

MOF Scaffold for a High‐Performance Mixed‐Matrix Membrane

A novel composite membrane consisting of an interconnected MOF scaffold coated with cross‐linked poly(ethylene glycol) (PEG) has been developed. As a result of its unique structure, the membrane shows an exceptional 18‐fold permeability enhancement as compared to pristine PEG membranes, without compromising the selectivity. This performance is unattainable with current mixed‐matrix membranes (MMMs). Our optimized membrane has a permeability of 2700 Barrer with a CO₂/N₂ selectivity of 35, which surpasses the latest Robeson upper bound.