一元-二元羧酸镧复合热稳定剂的合成与表征

以常见的一元羧酸和二元羧酸以及硝酸镧为原料,探讨了一元-二元羧酸镧的合成条件,制备了一系列一元-二元羧酸镧复合热稳定剂产品。通过刚果红试纸法和转矩流变仪法对产品的性能进行了表征,并通过红外光谱对产品的结构进行了表征。结果表明:一元-二元羧酸镧的最优合成条件为一元酸:二元酸=1.25:1,反应温度为70℃,保温时间为50min。最优产品对PVC的动态热稳定性可达1420s。     

孤岛油田含聚污水中酸性组分的分离与组成结构研究

采用石油醚和三氯甲烷分级萃取孤岛油田含聚污水中的油分,得到两个不同极性的组分F1和F2;用碱抽提法从酸值较高的F2组分中分离酸性物质并将其甲酯化,通过柱层析法将甲酯化物分成Ⅰ、Ⅱ和Ⅲ三个甲酯组分。用元素分析、红外光谱分析等对上述各组分的组成及结构进行鉴定,对甲酯组分Ⅰ进行GC MS 结构鉴定。结果表明,含聚污水中酸性乳化活性物质主要富集在F2组分中,降解HPAM是酸性物质的主要的组成部分;甲酯组分Ⅰ主要为石油酸甲酯,甲酯组分Ⅱ主要为含酰胺基的脂肪酸甲酯,甲酯组分Ⅲ除含有较多酰胺基脂肪酸甲酯外,还含有一定量的强极性含硫化合物;孤岛油田含聚污水中的轻质石油酸以单环环烷酸、四环环烷酸和脂肪酸为主,其中环烷酸的含量明显大于脂肪酸的含量。脂肪酸以C16和C18为主,单环环烷酸以C14~18为主,四环环烷酸以C18~21为主。     

Synthesis and characterization of a hyperbranched hydrogen bond acidic carbosilane sorbent polymer

Sorbent polymers can be designed to target molecular interactions with a variety of hazardous chemicals including explosives, chemical agents, narcotics, and toxic industrial chemicals. Applications of functionalized sorbent polymers include preconcentrator devices, SPME fibers, membrane introduction systems, chromatographic stationary phases and coatings for chemical sensors. One common feature of a wide range of hazardous chemicals is their hydrogen bond (h‐b) basicity. In this work, we report on the synthesis and characterization of a h‐b acidic hyperbranched carbosilane fluoroalcohol based sorbent polymer (poly(methyldi(1,1,1‐trifluoro‐2‐trifluoromethyl‐2‐hydroxypent‐4‐enyl)silane; HCSFA2), which is suitable for sorbing these hazardous h‐b basic analytes. Multiple batches of HCSFA2 were characterized with routine composition, spectroscopic, thermal analysis, and inverse gas chromatography (iGC) to evaluate polymer physicochemical properties. In comparison with previously developed h‐b acidic polymers (e.g., FPOL and SXFA), HCSFA2 exhibits a sorption improvement of 10–15 fold for h‐b basic analytes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3000–3009, 2010     

s-Triazine containing flame retardant hyperbranched polyamines: Synthesis, characterization and properties evaluation

A s-triazine containing hyperbranched polyamine (HBPA) has been synthesized from cyanuric chloride and aromatic diamine, 4,4′-(1,4-phenylenediisopropylidene) bis-aniline by nucleophilic displacement polymerization technique using an A₂ + B₃ approach with high yield (>80%). The synthesized polymer has been characterized by ¹H NMR, ¹³C NMR, FT-IR spectroscopic studies, elemental analysis, solubility and measurement of solution viscosity. The thermogravimetric (TG) analysis and differential scanning calorimetric (DSC) studies indicate that the polymer is thermostable upto 290 °C without any decomposition and has glass transition temperature of 243 °C. The flame retardancy of the pure powder polymer and the blends with linear commercial polymers such as plasticized PVC and LDPE with this hyperbranched polymer were investigated by the measurement of limiting oxygen index (LOI) value. The results show that the polymer has self-extinguishing characteristic (LOI = 38) and acts as an effective flame retardant additive for the above linear base polymers. The synergistic effect of this hyperbranched flame retardant was observed with triphenyl phosphine oxide in the same base polymers. The flammability efficiency of the hyperbranched polyamine is also evaluated by help of thermogravimetric (TG) analysis. The heat aging and leaching in different chemical media did not influence the flame retardancy of the blends.     

气体扩散层中聚四氟乙烯的分布对质子交换膜燃料电池水淹的影响

通过在不同真空度下进行碳纸的聚四氟乙烯（PTFE）浸渍处理,考察了PTFE在碳纸中的分布对燃料电池水淹情况的影响. 碳纸PTFE浸渍过程中,抽真空作用可以将碳纸微孔中存留的空气移除,使PTFE更均匀地扩散到内部微孔中. 碳纸的断面电镜照片显示真空浸渍可以改善PTFE的分布. 在总浸渍量相同时,由于真空浸渍使更多的PTFE进入到碳纸内部微孔,故其表面的PTFE比例减少. 实验进一步考察了碳纸中亲水孔和憎水孔的分布,结果表明真空浸渍处理的碳纸具有更高比例的憎水孔. 将不同处理方法的碳纸制备成膜电极,通过全尺寸电池考察其性能,结果表明PTFE的均匀分布可以改善电池性能,并且电化学阻抗分析表明其有利于改善水淹问题.     

Synthesis and characterization of hyperbranched polyurethane-benzyltetrazole

A series of hyperbranched polyurethane-benzyltetrazoles（H-PBTZs） with different linkage structures were synthesized via the polycondensation of hexamethylenediisocyanate as an A₂ type monomer with（4-（1H-tetrazol-5- yl）benzyl）-diethanolamine（TBDEA） as a BB’₂ type monomer in the absence of catalyst at different temperatures.The FTIR, and ¹³C and ¹H-NMR spectroscopy were used to characterize the molecular structures of TBDEA and H-PBTZs as well as the counterpart linear polyurethane-benzyltetrazole（L-PBTZ）.The molecular composition was determined by the reaction selectivity that the isocyanate group reacted with the hydroxyl group in diethanolamine segment or the active hydrogen atom on tetrazole ring.Raising reaction temperature was propitious to the reaction of isocyanate group with the active hydrogen atom on tetrazole ring.The degrees of branching（DB） for H-PBTZs obtained from the ¹H-NMR spectra increased with raising reaction temperature.The wider molecular weight distribution of 1.7-2.9 for H-PBTZs was obtained via GPC analysis.TGA results showed that H-PBTZs had high thermal stability compared with L-PBTZ.     

Synthesis and characterization of PEGylated comb-like cationic polymer by polycondensation and ATRP

PEGylated poly(2-(dimethylamino)ethyl methacrylate) with comb-like architecture was synthesized by two-step polymerization. First,poly(oligo(ethylene glycol) malicate)(POEGMA) bearing pendant hydroxyl groups was prepared by direct polycondensation of oligo(ethylene glycol) and malic acid in the presence of scandium triflate as chemoselective catalyst.Then the poly(2- (dimethylamino)ethyl methacrylate) side chains were grafted from the POEGMA backbone by atom transfer radical polymerization (ATRP) after the hydroxyl groups were modified into bromo-ester form,resulting in a PEGylated cationic copolymer with branched architecture.     

梳形抗盐聚合物在聚合物驱油中的应用

三次采油技术已成为我国提高原油采收率的主要措施之一。研制新型高效驱油用聚合物是降低成本,提高采油量的关键。目前国内外研制的新型高效驱油用聚合物主要为两性聚合物、耐温耐盐单体共聚物、疏水缔合聚合物、复合(或多元组合)型聚合物、共混聚合物和梳形聚合物等。     

化学复合驱用甜菜碱型表面活性剂的研究进展

简述了化学复合驱用甜菜碱型表面活性剂的研究现状.首先总结了羧基甜菜碱和磺基甜菜碱型表面活性剂的合成工艺进展;其次介绍了化学复合驱用甜菜碱型表面活性剂各方面的特性,主要包括其界面性质、耐温抗盐性以及与其它类型表面活性剂的复配性能;最后探讨了甜菜碱在油田上应用的可行性.     

Synthesis and characterization of hyperbranched polyurethane-urea coatings

A series of hyperbranched polyurethane (HBPU)-urea coatings were synthesized by a systematic two-step reaction process. Initially, isocyanate terminated PU prepolymers were prepared from a hyperbranched polyester polyols with isophorone diisocyanate at NCO/OH ratio of 1.6:1 for 5 h at 70-80 °C. The excess NCO content after the synthesis of NCO terminated HBPU prepolymer was completely reacted with atmospheric moisture. The obtained HBPU-urea networks were characterized with Fourier transform-infrared (FT-IR) spectroscopy for the quantitative evolution of the extent of urethane and urea bonds as well as to study the structure-property relationship. In order to find out the changes and types of intermolecular H-bonding interaction in the HBPU-urea films with the variation in polyester structure, the deconvolution of FT-IR spectra were carried out using Origin 6.0 software through Gaussian curve-fitting method. The viscoelastic properties and thermal stability of the synthesized coatings were determined by dynamic mechanical and thermal analyzer and thermogravimetric analyzer, respectively. For HBPU-urea samples glass transition temperature and thermal stability increased with the generation number from the first to the third. Polyester samples showed single step decomposition profile and HBPU-urea samples showed two-steps decomposition with good thermal stability.     

Synthesis and characterization of a novel nonlinear optical hyperbranched polymer containing a highly performing chromophore

We report herein the peripheral functionalization of a high glass transition temperature hyperbranched polyimide with a new and highly performing electro‐optic chromophore for the elaboration of a second‐order nonlinear optical material. In this study, the CPO1 chromophore was selected for its very high quadratic hyperpolarizability coefficient (μβ = 31,000 ? 10^?48 esu at 1990 nm) and its ease of synthesis in multigram scale. As a result, the new electro‐optic polymer was characterized by an r₃₃ coefficient around 40 pm/V at 1.5 µm, although the poling conditions were not optimized. For sake of comparison, the electro‐optic r₃₃ coefficient of our previously reported similar polymer functionalized with the well‐known Disperse Red One chromophore was also measured using the technique and gave a much lower r₃₃ coefficient. This study underscores that hyperbranched polymers are particularly promising matrices to host highly efficient chromophore to achieve more efficient and more stable electro‐optic devices than classical linear polymers. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of polymer/clay nanocomposites by intercalated chain transfer agent

In situ synthesis of poly(methyl methacrylate) (PMMA) and polystyrene (PS) nanocomposites by free radical polymerization using intercalated chain transfer agent (I-CTA) in the layers of montmorillonite (MMT) clay is reported. MMT clay was ion-exchanged with diethyl octyl ammonium ethylmercaptan bromide, which acts both as suitable intercalant and as chain transfer agent. These modified clays were then dispersed in methyl methacrylate (MMA) or styrene (St) monomers in different loading degrees to carry out the in situ free radical polymerization. The intercalation ability of the chain transfer agent and exfoliated nanocomposite structure were evidenced by both X-ray diffraction spectroscopy (XRD) and transmission electron microscopy (TEM). Thermal properties and morphologies of the resultant nanocomposites were also studied.     

Preparation, characterization and electrochemical corrosion studies on environmentally friendly waterborne polyurethane/Na-MMT clay nanocomposite coatings

In this study, we present the first practical evaluation for the corrosion protection effect of waterborne polyurethane (WPU)/Na⁺-montmorillonite (Na⁺-MMT) clay nanocomposite coating. Typically, a series of waterborne polyurethane (WPU)/Na⁺-montmorillonite (Na⁺-MMT) clay nanocomposite materials have been successfully prepared by effectively dispersing the inorganic nanolayers of commercially purified Na⁺-MMT clay in WPU matrix through direct aqueous solution dispersion technique. First of all, WPU was prepared by polymerizing PCL, DMPA and H₁₂MDI, followed by characterized by nuclear magnetic resonance (¹H NMR), Fourier transform infrared (FTIR) and gel permeation chromatography (GPC). Subsequently, the as-prepared PU/Na⁺-MMT clay nanocomposite (Na⁺-PCN) materials were subsequently characterized by FTIR, X-ray diffraction (XRD) patterns and transmission electron microscopy (TEM).PCN materials in the form of coating at low Na⁺-MMT clay loading up to 3 wt% coated on the cold-rolled steel (CRS) coupons were found to exhibit superior corrosion protection effect over those of neat WPU based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and impedance in 5 wt% aqueous NaCl electrolyte. Effects of the material composition on the gas permeability, thermal stability and optical clarity of neat WPU along with a series of Na⁺-PCN materials, in the form of coating and free-standing film, were also studies by gas permeability analyzer (GPA), thermogravimetric (TGA), differential scanning calorimetry (DSC) and ultraviolet UV-visible transmission spectroscopy, respectively. As control experiments, a series of PU/organo-MMT nanocomposite (denoted by organo-PCN) materials were also prepared for comparative studies.     

Adsorption and photochemical behaviors of the novel cationic xanthene derivative on the clay surface

Novel tetra-cationic xanthene derivative (Flu) was synthesized. Its adsorption and photochemical behaviors on the clay surface were investigated. Fluorescence quantum yield (?_f) and fluorescence lifetime were 0.50 and 2.9 ns for Flu/clay complex. ?_f of Flu was enough high (>0.1) even at high density conditions (0.080 molecules nm⁻²). It is supposed that the strong interaction between clay and Flu by the ‘Size-Matching Effect’ realizes the highly emissive clay complexes at high density adsorption condition by a suppression of a molecular aggregation, which tends to decrease the photochemical activity.     

Synthesis and characterization of oxazoline-functional polymer particles by free radical nonaqueous dispersion polymerization

A novel oxazoline-functional methacrylate was prepared and employed as comonomer to produce nonaqueous dispersions of oxazoline-functional polymer particles. In nonaqueous free radical dispersion copolymerization of methylmethacrylate in the presence of oxazoline-functional methacrylate, ethyleneglycoldimethacrylate crosslinking agent, AIBN initiator, and polystyrene-block-poly(ethene-alt-propene) dispersing agent, the average polymer particle size, varying between 100 and 500 nm, was controlled by the dispersing agent contents. According to titration with HClO₄ all oxazoline groups regardless of their location at particle surface or bulk, were accessible. Glass transition temperature decreased from 120 to 0°C when oxazoline functional methacrylate was increased from 0 to 95 mol %. As imaged by atomic force microscopy incorporation of the new oxazoline-functional methacrylate improved film formation. Oxazoline-functional polymer particles were easy to redisperse in a variety of other diluents. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2539–2548, 1997     

超支化分子桥联受阻酚抗氧化剂的合成与表征

以正十八胺为核的1.0代超支化大分子和β-(3,5-二叔丁基-4-羟基苯基)丙酰氯为原料,通过酰胺化缩合反应,合成了一种具有长链烷基和2个受阻酚基团的新型超支化分子桥联受阻酚类抗氧化剂.通过正交实验确定了超支化分子桥联受阻酚类抗氧化剂的最佳合成体系为:3,5-丙酰氯为酰化剂、K_2CO_3为缚酸剂、苯和水为反应溶剂.通过条件优化实验确定了超支化分子桥联受阻酚类抗氧化剂的最佳合成条件为:3,5-丙酰氯与1.0代超支化大分子的物质的量比为6∶1、反应温度为25 ℃、反应时间为12 h、体系苯与水体积比为6∶1、3,5-丙酰氯与缚酸剂K_2CO_3的物质的量比为1∶1,在此条件下,超支化分子桥联受阻酚类抗氧化剂的收率高达75.5%.FT-IR和1H NMR证实了合成抗氧化剂的化学结构与其理论结构相符.超支化分子桥联受阻酚类抗氧化剂在聚乙烯树脂中的抗氧化性能优于抗氧化剂1076,且随着烷基链长度的增加,抗氧化性能增强.     

Hydrophilic,cationic large‐core star polymers and polymer networks: Synthesis and physicochemical characterization

Group transfer polymerization was used to prepare hydrophilic, cationic large‐core star polymers (LCSPs) and networks of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and ethylene glycol dimethacrylate (EGDMA) in a two‐step procedure involving the synthesis of linear DMAEMA arms, followed by their crosslinking using a mixture of DMAEMA monomer and EGDMA crosslinker. The degree of polymerization of the linear chains prepared in the first step was kept constant, while the composition of the crosslinking mixture was varied systematically at a constant amount of crosslinker. The monomer/crosslinker molar ratio determined whether LCSPs or polymer networks would be produced. In particular, a high monomer/crosslinker molar ratio led to the formation of networks, whereas LCSPs were formed when a low monomer/crosslinker molar ratio was used. The absolute weight‐average molecular weight of the LCSPs was determined using static light scattering, whereas their hydrodynamic radii and radii of gyration were determined using dynamic light scattering and small‐angle neutron scattering, respectively. The sol fraction extracted from the networks decreased as the monomer/crosslinker molar ratio increased. The degrees of swelling of all of the networks were measured as a function of pH and were found to increase below pH 7. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3958–3969, 2008     

MALDI TOF‐TOF characterization of a light stabilizer polymer contaminant from polypropylene or polyethylene plastic test tubes

Disposable plasticware such as plastic test tubes are routinely used in all proteomics laboratories. Additives in polymers are used to protect them against oxygen or ultraviolet (UV) light degradation. Hindered amine light stabilizers (HALSs) are of utmost importance in modern polyolefin (polypropylene, polyethylene) stabilization. In this article, we demonstrate that the manufacturing polymeric agent: poly‐(N‐β‐hydroxyethyl‐2,2,6,6‐tetramethyl‐4‐hydroxy‐piperidinyl succinate), known as Tinuvin‐622 or Lowilite 62, from the HALS family, leaches from laboratory polypropylene or polyethylene plastic test tubes into the standard solvents for sample preparation. The analysis of these polluted samples by matrix‐assisted laser desorption/ionisation‐time of flight (MALDI‐TOF) mass spectrometry, in the positive mode, shows highly contaminated mass spectra, due to the high sensitivity of this technique. These contaminants have mass range and mass defect similar to those of peptides arising from the digestion of a protein in a conventional proteomics study. Therefore, they can be really harmful for proteomics studies, leading to misattributions, preventing any protein identification. In this article, an MS and MS/MS fingerprint of this pollutant is given and some pieces of advice to avoid it are proposed. Copyright © 2009 John Wiley & Sons, Ltd.