Protein resistance of polyurethane with hydrophilic and hydrophobic soft segments

Polyurethane (PU) containing poly(propylene glycol) (PPG) or poly(tetramethylene oxide) (PTMG) soft segments have been prepared by two‐step condensation polymerization. The former (PPG‐PU) with a lower critical solution temperature (LCST) at ～21 °C can change from hydrophilic to hydrophobic, whereas the latter (PTMG‐PU) is hydrophobic at a temperature above 0 °C. The adsorption of fibrinogen, bovine serum albumin, or lysozyme on such a PU surface in aqueous solution has been investigated by use of quartz crystal microbalance with dissipation (QCM‐D) and surface plasmon resonance (SPR) in real time. PPG‐PU surface exhibits protein resistance at a temperature below the LCST of PPG, but it significantly adsorbs proteins at a temperature above the LCST. On the other hand, the hydrophobic PTMG‐PU surface adsorb the proteins at any temperatures investigated, in contrast with the hydrated poly(ethylene glycol) exhibiting excellent protein resistance. The hydration and dehydration of the polymers at different temperatures were confirmed by Raman spectroscopy. Our study demonstrates that the protein resistance of polymers is determined by their hydration. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1987–1993, 2010     

Influence of siloxane co-segment length and content of waterborne polysiloxane-urethane copolymers on their water resistance, thermal stability and mechanical properties

<正>A series of stable waterborne polysiloxaneurethane(WPSUR) dispersions were prepared using amino-terminated polydimethylsiloxane(NS),dimethylolpropionic acid(DMPA),castor oil,polypropylene glycol and toluene diisocyanate. Meanwhile,NS with different molecular weights was synthesized and used as the soft co-segment.Effects of types and contents of soft co-segments as well as chain extenders on the thermal degradation and stability for WPSUR films were examined.Results reveal that WPSUR films exhibit excellent water resistance and mechanical properties as compared with pure polyurethane(PU) films,and the NS soft co-segment possesses a remarkable effect on the second stage(stageⅡ),while the content of the hard segment is propitious to the initial stage(stageⅠ).Moreover,the highest temperature of stageⅡ(T_(2m)) for WPSUR films using NS as soft co-segment is 413℃,approximately being 30℃higher than that of those typical PUs using HDA and APDMS as the chain extenders,respectively.     

ZrO2 phase structure in coating films and powders obtained by sol-gel process

Zirconia coating film and powder obtained by the sol-gel route using zirconium n-propoxide as starting material and acid catalyst were investigated by the Perturbed Angular Correlations method, X-Ray Diffraction and Differential Scanning Calorimetry and Differential Thermal Analyses. The hyperfine interaction, measured after annealing the samples at increasing temperatures up to 1100°C, allowed to distinguish five different zirconium neighborhoods. Two of them describe rather disordered material which, on heating, crystallizes to the tetragonal phase and end finally in monoclinic zirconia. As compared with the powder, the film exhibits a minor fraction of an unidentified ordered form and a higher and more stable fraction of tetragonal phase. In addition, the tetragonal to monoclinic conversion takes place at higher temperatures and with a larger activation energy.Researcher for CONICET-ArgentinaResearcher for CICPBA-Argentina     

Spectroscopic and electrical properties of SiO2 films prepared by simple and cost effective sol-gel process

Amorphous SiO2 thin films were prepared on glass and silicon substrates by cost effective sol-gel method. Tetra ethyl ortho silicate (TEOS) was used as the precursor material, ethanol as solvent and concentrated HCl as a catalyst. The films were characterized at different annealing temperatures. The optical transmittance was slightly increased with increase of annealing temperature. The refractive index was found to be 1.484 at 550 nm. The formation of SiO2 film was analyzed from FT-IR spectra. The MOS capacitors were designed using silicon (100) substrates. The current-voltage (I-V), capacitance-voltage (C-V) and dissipation-voltage (D-V) measurements were taken for all the annealed films deposited on Si (100). The variation of current density, resistivity and dielectric constant of SiO2 films with different annealing temperatures was investigated and discussed for its usage in applications like MOS capacitor. The results revealed the decrease of dielectric constant and increase of resistivity of SiO2 films with increasing annealing temperature.     

Calorimetric investigation of the adsorption of nitrogen bases and nucleosides on a hydrophobic interaction sorbent

Heats of adsorption for nitrogen bases and nucleosides on Sepharose CL-6B, a hydrophobic interaction adsorbent, were collected through flow microcalorimetry in order to ascertain the thermodynamic driving force for adsorption in each case. It was determined that enthalpy changes associated with base stacking self-interactions can contribute significantly to the observed heats of adsorption. Accordingly, the observed heats were the net effect of the adsorbate/adsorbent interactions and the adsorbate stacking self-interactions. Since base stacking proceeds beyond the dimer stage, multi-layer adsorption of these compounds is possible, even at low solution concentrations.     

Formation of functional nanofibrous electrospun polyurethane and murivenna oil with improved haemocompatibility for wound healing

Electrospinning is an emerging tool and promising method to fabricate polymer nanofibers. The aim of this work was to fabricate electrospun polyurethane mats reinforced with murivenna oil for wound dressings. The scanning electron microscopy (SEM) micrographs showed the fiber diameter of nanocomposites in the range of 740 ± 160 nm and found to be decreased compared to pure polyurethane. Surface of nanocomposites was analyzed by Fourier transform infrared spectroscopy (FTIR) insinuated the interactions between PU and murivenna oil by the formation of hydrogen bond and changes in the characteristics peaks. Contact angle of the PU incorporated murivenna oil showed a decrease in its value compared to pure PU indicating the increased wettability and hydrophilic nature. The thermal degradation and stability of fabricated composites was found be enhanced compared to pure PU. The surface morphology through atomic force microscopy (AFM) analysis showed a change in surface roughness due to presence of murivenna oil in the polymer matrix. In blood compatibility results, both activated partial thromboplastin time (APTT) and prothrombin time (PT) were delayed due to improved surface properties and the addition of murivenna oil in the PU matrix. Compared to pure PU, the hemolysis assay of the PU incorporated murivenna oil showed a significant decrease in the percentage of lysis of red blood cells indicating better blood compatibility. Following the results, it was confirmed that fabricated novel scaffolds having better physicochemical and enhanced blood compatibility properties may be utilized for wound dressing.     

Optical, electrical and dielectric properties of TiO2-SiO2 films prepared by a cost effective sol-gel process

Titanium dioxide (TiO(2)) and silicon dioxide (SiO(2)) thin films and their mixed films were synthesized by the sol-gel spin coating method using titanium tetra isopropoxide (TTIP) and tetra ethyl ortho silicate (TEOS) as the precursor materials for TiO(2) and SiO(2) respectively. The pure and composite films of TiO(2) and SiO(2) were deposited on glass and silicon substrates. The optical properties were studied for different compositions of TiO(2) and SiO(2) sols and the refractive index and optical band gap energies were estimated. MOS capacitors were fabricated using TiO(2) films on p-silicon (100) substrates. The current-voltage (I-V) and capacitance-voltage (C-V) characteristics were studied and the electrical resistivity and dielectric constant were estimated for the films annealed at 200°C for their possible use in optoelectronic applications.     

Optical and transport phenomena in CdO:La films prepared by sol-gel method

A series of lightly La-doped CdO thin films (1%, 5%, and 7%) have been prepared by a spin coater sol-gel technique on amorphous glass and crystalline Si substrates. Those prepared films were studied by X-ray diffraction (XRD), UV-VIS-NIR absorption spectroscopy, and dc-electrical measurements. The investigation shows that La doping grows slightly the CdO lattice parameter and decreases the intrinsic energygap from 2.1 eV to 1.7 eV. The optical properties were easily explained in the framework of classical Drude theory and thus all the corresponding parameters were determined. The electrical behaviour of the samples shows that they are degenerate semiconductors until the atomic percentage of the La dopant was 7% then the sample was converted into a non-degenerate semiconductor. Generally, it was observed that the conductivity and mobility of the carriers were decreased by increasing the La content in the CdO film samples.     

Dielectric and piezoelectric properties of dense and porous PZT films prepared by sol-gel method

PZT films with different microstructure and Zr:Ti ratios were fabricated on ITO/glass and platinized silicon wafer substrates by dip-coating. A dense film of 2% porosity and a porous film of 19% porosity were obtained by repetition of thin and thick coatings, respectively. Development of pores during heating the film was examined and heating process factors were investigated. In the film fabricated on ITO/glass substrates, an existence of non-perovskite and low permittivity layer was confirmed by measurement of film thickness dependence of the dielectric constant. Among the films studied, the film with molar composition of Ti:Zr = 5:5 exhibited the largest dielectric constant and apparent piezoelectric coefficient, d ₃₃, though the values were small. Apparent piezoelectric coefficients of d ₃₃ and g ₃₃ of the porous films were larger than those of the dense films.     

乙醇-盐酸-水体系中溶胶-凝胶法制备纳米TiO2薄膜的研究

以Ti (OBu)4为前驱体,设计单因素优选实验,通过溶胶凝胶-浸渍提拉法在玻璃基片上制备TiO2纳米薄膜,研究了无水乙醇、浓盐酸、超纯水对其结构和性能的影响,获得了纳米TiO2薄膜的最佳制备条件.     

Raman spectra and structure of multicomponent oxide planar waveguides prepared by sol-gel

This work was aimed at understanding the structure of SiO₂–MO₂ (M = Ti, Zr, Hf) and SiO₂–HfO₂–MO₂ (M = Ti, Zr) materials, used as mixed oxide glass hosts for Er³⁺ ions in the fabrication of optical planar waveguides by sol-gel processing. This structural study was performed by Waveguide Raman Spectroscopy (WRS), complemented with X-ray diffraction (XRD). The admixture of TiO₂ to HfO₂, SiO₂–HfO₂ and HfO₂–ZrO₂ compositions was found to cause precipitation of nanocrystals of tetragonal HfO₂ or ZrO₂, or the formation of hafnia-titania mixed crystals, depending on the HfO₂/TiO₂ molar ratio.     

Abrasion resistant inorganic/organic coating materials prepared by the sol-gel method

Novel abrasion resistant coating materials prepared by the sol-gel method have been developed and applied on the polymeric substrates bisphenol-A polycarbonate and diallyl diglycol carbonate resin (CR-39). These coatings are inorganic/organic hybrid network materials synthesized from 3-isocyanatopropyltriethoxysilane functionalized organics and metal alkoxide. The organic components are 3,3-iminobispropylamine (IMPA), resorcinol (RSOL), diethylenetriamine (DETA), poly(ethyleneimine) (PEI), glycerol and a series of diols. The metal alkoxides are tetraethoxysilane (TEOS) and tetramethoxysilane (TMOS). These materials are spin coated onto bisphenol-A polycarbonate and CR-39 sheets and thermally cured to obtain a transparent coating of a few microns in thickness. Following the curing, the abrasion resistance is measured and compared with an uncoated control. It was found that the abrasion resistance of inorganic/organic hybrid coatings in the neat form or containing metal alkoxide can be very effective to improve the abrasion resistance of polymeric substrates. The adhesion tests show that the adhesion between coating and substrate can be greatly improved by treating the polymeric substrate surface with a primer solution of isopropanol containing 3-aminopropyltriethoxysilane (3-APS). The interaction between 3-APS and the polycarbonate surface was investigated by a molecular dynamics simulation. The results strongly suggest that the hydrogen bonding between the amino group of the 3-APS and ester group in the polycarbonate backbone are sufficiently strong to influence the orientation of the primer molecules. The abrasion resistance of these new coating systems is discussed in light of the structure of the organic components. All of these results show that these coating materials have excellent abrasion resistance and have potential applications as coating materials for lenses and other polymeric products.     

Structure,properties and interfacial interactions in poly(lactic acid)/polyurethane blends prepared by reactive processing

Polyurethane elastomers are promising candidates for the impact modification of PLA producing blends for example for biomedicine. Poly(lactic acid) (PLA)/polyurethane elastomer (PU) blends were prepared by reactive processing and physical blending as comparison. The blends were characterized by a number of techniques including microscopy (scanning electron microscopy, SEM, and atomic force microscopy, AFM), rotational viscometry, thermal (dynamic mechanical analysis, DMA), and mechanical (tensile) measurements. The analysis and comparison of the structure and properties of physical and reactor blends proved the successful coupling of the phases. Coupling resulted in more advantageous structure and superior mechanical properties compared to those of physical blends as confirmed by morphology, macroscopic properties and the quantitative estimation of interfacial interactions. Structural studies and the composition dependence of properties indicated the formation of a submicron, phase-in-phase structure which positively influenced properties at large PU contents. The results strongly support that reactive processing is a convenient, cost-effective and environmentally friendly technique to obtain blends with superior properties.     

Simultaneously toughening and reinforcing poly(lactic acid)/thermoplastic polyurethane blend via enhancing interfacial adhesion by hydrophobic silica nanoparticles

This work focuses on satisfactorily toughening and reinforcing poly(lactic acid)/thermoplastic polyurethane (PLA/TPU) blend with low TPU content (10 wt%) using appropriate amounts of hydrophobic silica nanoparticles (SiO₂) via simple melt mixing. Both thermodynamic prediction and transmission electron microscopy micrographs demonstrate that most SiO₂ nanoparticles distribute at interfaces between the PLA and TPU phases. This improves interfacial adhesion between the phases, which is attributed to good bonding strength between the PLA and SiO₂ via hydrophobic interaction and formation of hydrogen bonds between the TPU and SiO₂. The PLA/TPU (90/10) ternary blend nanocomposite with 2 wt% SiO₂ exhibits obviously high impact strength (about 5.0 and 12.6 times that of the corresponding blend and PLA, respectively) and higher tensile strength than the blend and even the PLA. Crazing is the main reason for improved impact toughnesses of the blend nanocomposites. This work provides a simple and effective strategy to endow PLA/elastomer blends with optimum strength–toughness balance by adding appropriate amounts of nanoparticles.     

Thermoplastic and thermosetting properties of polyphenylsilsesquioxane particles prepared by two-step acid-base catalyzed sol-gel process

Polyphenylsilsesquioxane (PhSiO_3/2) particles were synthesized by a two-step acid-base catalyzed sol-gel process, in which phenyltriethoxysilane used as a starting alkoxide was hydrolyzed and condensed in the first step under two different acid-catalyzed conditions. The PhSiO_3/2 particles prepared under an acid-catalyzed process without using a solvent were thermally hardened after the first heating up to 200°C. In contrast, the PhSiO_3/2 particles prepared under an acid-catalyzed process with ethanol as a solvent were thermally softened with the repeated heating processes up to 200°C. From the gel permeation chromatography measurements, it was found that the average molecular weight of the particles prepared with the use of ethanol was decreased in comparison with that of the particles prepared without using ethanol. The addition of ethanol in the sols during hydrolysis and condensation reaction under the acid-catalyzed process caused the decrease in the average molecular weight, which should result in the changes of thermal property of PhSiO_3/2 particles from thermosetting to thermoplastic.     

Photocatalytic activity of nitrogen and copper doped TiO2 nanoparticles prepared by microwave-assisted sol-gel process

Cu and N-doped TiO₂ photocatalysts were synthesized from titanium (IV) isopropoxide via a microwave-assisted sol-gel method. The synthesized materials were characterized by X-ray diffraction, UV-vis diffuse reflectance, photoluminescence (PL) spectroscopy, SEM, TEM, FT-IR, Raman spectroscopy, photocurrent measurement technique, and nitrogen adsorption–desorption isotherms. Raman spectra and XRD showed an anatase phase structure. The SEM and TEM images revealed the formation of an almost spheroid mono disperse TiO₂ with particle sizes in the range of 9-17 nm. Analysis of N₂ isotherm measurements showed that all investigated TiO₂ samples have mesoporous structures with high surface areas. The optical absorption edge for the doped TiO₂ was significantly shifted to the visible light region. The photocurrent and photocatalytic activity of pure and doped TiO₂ were evaluated with the degradation of methyl orange (MO) and methylene blue (MB) solution under both UV and visible light illumination. The doped TiO₂ nanoparticles exhibit higher catalytic activity under each of visible light and UV irradiation in contrast to pure TiO₂. The photocatalytic activity and photocurrent ability of TiO₂ have been enhanced by doping of the titania in the following order: (Cu, N) - codoped TiO₂ > N-doped TiO₂ > Cu-doped TiO₂ > TiO₂. COD result for (Cu, N)-codoped TiO₂ reveals ∼92% mineralization of the MO dye on six h of visible light irradiation.     

Impact of bulk and surface properties of some biocompatible hydrophobic polymers on the stability of methylene chloride-in-water mini-emulsions used to prepare nanoparticles by emulsification-solvent evaporation

The emulsifying and stabilizing ability of several hydrophobic (insoluble in water and soluble in volatile organic solvents) polymers, such as Eudragit RL, Eudragit RS, PLGA, PCL, and their mixtures, with regard to the methylene chloride (MC)-in-water mini-emulsions, has been compared to the viscosity of MC solutions and to the properties of adsorption and spread monolayers of these polymers.

Eudragits RS and RL contain 2.5 and 5 mol% of pendent cationic trimethylammonium (TMA) groups per 164 g/mol segments, whereas PLGA and PCL contain 1 and 2 polar carbonyl groups per 130 and 114 g/mol, respectively. The electrostatic attraction between the dipoles, formed by TMA groups and the condensed counter ions in the MC solutions, leads to the contraction of macromolecular coils of Eudragits, whereas the PLGA and PCL macromolecules, interacting by low polar carbonyl groups (with dipole moment μ = 2.7 D) retain more extended conformation in MC. This explains why the characteristic viscosities [η] of MC solutions are much lower for the former polymers (0.1 dL/g) with regard to PLGA and PCL solutions whose [η] is equal to 0.3 and 0.6 dL/g, respectively.

The ionization of TMA groups in contact with the water phase leads to the irreversible adsorption of Eudragits at the MC/water interface and to high decrease of the interfacial tension γ (down to 4 mN/m for the 5% MC solutions). Whereas PLGA and PCL possessing low polar carbonyl groups adsorb poorly at the MC/water interface exhibiting γ  28 mN/m. Higher stability of spread monolayers of Eudragits (π*  40 mN/m) with regard to PLGA and PCL (π* < 20 mN/m) correlates well with higher interfacial activity of the former with regard to the later. The higher surface potential ΔV of Eudragits (0.9 V) with regard to PLGA (0.3 V) and PCL (0.4 V) is explained by the formation of electric double layer (DL) by the former, whereas the later contribute to the ΔV only by cumulative dipole moments of carbonyl groups. The experimental values of surface potentials correlate well with the Gouy–Chapman model of the DL and the Helmholtz model of the monolayer.

The ensemble of experimental results leads to the conclusion that higher emulsifying and stabilizing ability of Eudragits with regard to PLGA and PCL is due to higher adsorption activity of the former which form the corona of polymeric chains with ionized TMA groups around the droplets. It can be postulated that Eudragit polymers have good surface active properties which may allow manufacturing of biocompatible nanoparticles by emulsification–solvent evaporation method without surfactants.     

Functionalizing nano-montmorillonites by modified with intumescent flame retardant: Preparation and application in polyurethane

The 2-(2-(5,5-dimethyl-1,3,2-dioxaphosphinyl-2-ylamino)ethy-amino)-N,N,N-triethyl-2-oxoethanaminium chloride (compound c) containing phosphorus-nitrogen structure was synthesized and characterized. A novel intumescent flame retardant, namely montmorillonite (MMT) by modified with compound c (c-MMT), was prepared by ion exchanging of the nanometer Na⁺-montmorillonite (Na-MMT) with compound c. Both FTIR and X-ray diffraction (XRD) indicated that compound c had intercalated with Na-MMT and exfoliated c-MMT/PU nanocomposites have obtained by in-situ polymerization. TEM results further support the formation of the exfoliated nanocomposites. The thermal stability and flammability of c-MMT/PU composites were investigated by thermogravimetric analysis (TGA) and cone calorimeter test respectively. The results showed that the addition of flame retardant c-MMT enhanced the thermal stability and flame retardancy of PU significantly. SEM results indicated that c-MMT can achieve better dispersion in the chars after combustion and the compact and dense intumescent char is formed for c-MMT/PU composites after combustion. It is found that the char structure plays an important role for c-MMT in PU resin. The thermal stability and flame retardancy of PU resin were also significantly improved by an addition of c-MMT in PU resin.     

Unprecedented tunable hydrophobic effect and anion recognition triggered by AIE with Hofmeister series in water

An unprecedented tunable hydrophobic effect in self-assembly of a small cationic organic fluorophore(NI-TPy~+)-based with aggregation-induced emission(AIE) property was realized in aqueous solution.The amplification of hydrophobicity was found to be significantly dependent upon the increasing aggregate s of NI-TPy~+,which enable d the study of the hydrophobic binding of chaotropic anions with the Hofmeister series.     

Synthesis of TiO2 thin film by a modified sol-gel method and properties of the prepared films for photocatalyst

PTA (peroxo titanic acid) gel was prepared by a modified sol-gel method from peroxo titanic acid using TiCl₄/ethanol/water solution as the starting material at room temperature. Physicochemical properties of heat-treated gel were characterized by IR, XRD, TG-DTA and SEM. Optimal preparing conditions were chosen to prepare anatase film for the photocatalytic degradation of methyl orange. The dip-coating technique was used to synthesis the supported anatase film on quartz glass. Photocatalytic efficiency for the degradation of methyl orange under UV irradiation was also examined. It was found that the degradation efficiency of the anatase film synthesized in this paper is higher than commercial titania P25.